Time Machine does not restore Aperture library properly

After considerable testing, I have found 2 issues. (1) When the TM Restore takes place, it restores the contents of the Aperture package, not the package. This can be remedied by creating a new library, opening its package, replacing them with the items restored, closing the window and opening that package. Works but not the way it should work. (2) Although TM appears to save the full library size (5 gb in my test), and I can see it in backup.backup, the restore only brings back the bare database (500 mb for me) and thus it has to regenerate all of the thumbnails, which can be very very time-consuming for a large database.
Has anyone had a different experience and, if so, what did they do?

Update upon further testing: If you select an Aperture library icon in the finder, enter Time Machine, go to a previous version and do a Restore, you get a dialog box asking if you want to keep the original or replace it. In my testing I have found that Replace works fine, but if you select Both (keep the original), Time Machine returns a folder of the Aperture library contents, not the package as described above. The folder resides next to the original library but cannot be used until it is put into a package. I think this is a bug.
However, if you have the library in a folder and you restore that folder using the Both option, Time Machine will properly provide a new folder and a restored library in it in a package form.

Similar Messages

Time machine does not restore backup

After my iMac crashed, it prompted me to restore from my Time Machine. I started doing it, but about 20% and 4-5 hours later, I got a message saying 'Cannot find any connected Time Machines' . And I could actually see the connected volume of Time machine on the Desktop!
Please help, 700Gb of Data are at stake!!
Thanks,
GL

What is the backup device?

Time machine does not restore

Since Lion I had serious issues with my Time Machine. Had a DROBO connected through FW800 and und SL this worked perfect. After changing to Lion, my machine (Mac Pro dual 2.66) froze constantly, and FW800 was the cause. Somehow I managed to get my new initial backup done through FW800 (500GB) but had to move over to using USBm which for the daily changes works fine.
However. The system seems to backup, but there is now way I can SEE the backups, or even use them. Under SL clicking Time Machine showed me the timeline with all backups, and the option - obviously - to pick the data I want to restore. Under Lion, clicking Time machine NOTHING happens. I cannot see the TM app appear, not t

I found the problem. Time Machine was restoring to a back-up clone, an external FWHD, even though that was not the startup drive. Perhaps it was temporarily the startup drive on the date that I was trying to restore from?

My time machine does not restore

I use iOmega for backing up, and recently needed to restore all my data - but it didn't do it. I might have done it wrong: I opened Finder before entering time machine. There I clicked on the HD and highlighted all, applications, system info, users... Then went back in time, and clicked 'restore'. But it didn't work.
How to do it right? Or is something wrong with my back up equipment?
I have a MacBook Air from 2012, with Mavericks installed.

To restore a file you can work from the Finder. To restore you need to boot into Recovery. Restart your computer holding the R key as soon as you hear the chime. Once the computer completes booting restore

Since installing Lion, I have not been able to utilize Time Machine (does not recognize the back-up drive); my wireless mouse does not function properly; I have experienced unreasonable delays in the system. Is there a fix or upgrade coming?

Is there a fix or upgrade to deal with the many problems I am experiencing since I installed Lion? I can no longer utilize Time Machine (Does not see the back-up drive); my wireless mouse does not work properly; my iMac has slowed down considerably. I am reminded of having a PC machine again. Bummer!

Either downgrade to Snow Leopard or try reinstalling Lion.
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Restore from time machine does not list all my backups. I know they exist but there dates are not present on the restore list. Any help appreciated.

Restore from time machine does not list all my backups. I know they exist but their dates are not present on the restore list. Any help appreciated. If I must use one of these older dates to restore, how do I then get the more current data off time machine?

Ok, so am i correct in saying that the steps to fix are as follows.
That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
It should, but sometimes people report that it fails. I'm not sure why that happens.

Time machine does not back up iPhoto in mountain lion ?

My Time Machine does not back up my iPhoto library. When I open Time Machine I get Desktop display going back to installation date.
All other applications respond correctly including Mail, Contacts, etc. My Seagate drive is not involved in the present programme of repair I have been told by Apple. Any ideas?

I'm now fixed and done (update to latest software and learn how to use it)
Thanks again Ivan for the article, it alerted me to otherwise incomprehensible changes in iPhoto/Time Machine operation such as in my case would transfer 3.8GB of data to restore a single photo, while apparently loosing all photos added after that backup time.
However the article says:
When using iPhoto ’11 (version 9.2 or later) and Time Machine with OS X Lion 10.7.2 (or later), iPhoto no longer has the Browse Backups option. This means that instead of restoring specific photos within your iPhoto Library, you must restore your entire iPhoto Library.
This may be practically true but it is technically false.
To restore a single photo in iPhoto '11 with Time Machine it goes something like this:
Start with your Time Machine hard drive and navigate many steps (including showing package contents where necessary) all the way through to the photo/date you want. Drag it to your desktop. (Do not make any edits in Time Machine!) Import to iPhoto. Click on last import in iPhoto. Right click the photo and change the event name, then look for it at the right date in iphoto with the new event name.
Hopefully those with more time and patience can check this out and see what it can do. I had to do it twice with Apple suport senior tech to get it. What a pain compared to iPhoto' 09 but at least now I can restore iPhoto library or a photo if necessary.
David

I recovered my back up via a wired connection. now Time Machine does not recognise older back ups wirelessly and wants to do a first back up

I recovered a back up from my time machine via a wired connection after getting the 'white screen of death'. Now Time Machine does not recognise any back ups on the time machine when connected wirelessly and wants to do a first back up of the whole machine. How do I get my mac to recognise these older back ups? It connects to the wifi network the time machine creates fine, with the same name and password.

I recommend the following.
1. Reset the TC to factory.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Rename the TC to SMB standard.
That means short names.. 2-20 characters but less than 10 is excellent. eg TCGenx (use number for x that is actual generation of the TC)
No spaces.
Pure alphanumeric. No apostrophe.
3. Ensure IPv6 is set to link-local..
Do the same thing for ethernet if that is used.
4. Manually mount the TC disk in Finder.
Use Go in the top menu.. connect to server.
Type in
AFP://TCname.local (where TCname is your new short name for the TC and local is default domain .. it helps using the domain I found).
You will then find the computer either can or cannot find the network resource.. if it fails something else is wrong with the actual network and you will need to fix that.
It will request the password if it is found.. password is public by default unless you changed it.. type in the password and check to keep it in your keychain.
5. Delete current TM setup and redo it with the newly named TC.
See A4 here. http://pondini.org/TM/Troubleshooting.html
If your backups cannot be found, try B6 again, now that you actually know that the disk has been properly discovered.

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

Time machine does not appear in Disk Utility

Time machine does not show up in Disk Utilities, connected by ethernet. I need to erase the disk. How to solve?

I am sorry - I simply do not understand your instructions!
I have 2 Time Capsules and have been using both. However a few days ago they quit working. I have had to turn off Time Machine because I am getting hourly alerts that back-up failed because there is not enough space. It does not delete old backups to provide additional space. I am willing to erase both to try to get them working again but I cannot figure out how to erase and setup the drives. Hence I turned Time Machine off.
There is nothing wrong with the MBP internal hard drive. "Sparse bundle" is total Greek to me! My wifi network appears to be working properly. The internal HD is mounted in Disk Utilities and verified as working properly. I am a long time user of Apple but I am still a novice (Level 1)!
Perhaps I should start a new thread.

Time Machine does not start after external hard drive is connected

Time Machine does not start after external hard drive is connected

These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
Also bear in mind that:
1. restoring data over icloud takes time
2. iCloud is not designed as a replacement to Time Machine.

Time Machine does not backup all files

I recently did a clean install and to my horror i can see that Time Machine does NOT back up all my files.
It seems to be worst in my music library which fortunately is pretty easy to rebuild do to itunes index.
But is there any way to make sure that Time Machine does in fact back up all files?
Or is it just broken and should be avoided?
I have 1,5 year old Macbook Pro Retina 15 inches 500 GB SSD

If you use the third-party application "Dropbox," you may see files in the Finder that are not present locally, but are actually on a network server. Those files won't be backed up and won't appear in Time Machine, even though they show in a Finder window. If the files in question are in a Dropbox folder, disable the software or refer to its developer for support.
Continue only if you've ruled out Dropbox or any similar product as a possible cause of the issue.
Open the Time Machine preference pane and unlock the settings, if necessary. Click the Options button. If there is one particular folder with items that are not being backed up reliably, add it to the list of excluded items. If there are many such folders, add your home folder to the list, or add a whole volume (i.e., what Apple calls a "disk.") Save the changes.
Start a backup, or wait for one to happen automatically. When it's done, open the preference pane again and remove the exclusion(s) you made earlier. Back up again and see whether there's a change.

Time Machine did not restore a lot of my old mail??

Hi,
Time machine did not restore all of my mail? I have two mailboxes in mail- comcast and cana.
I got all my messages from comcast but not cana. Does anybody know why it did not restore the messages in cana?
Thanks

When you open the mail app in an account you can work with Time Machine in the mailboxes for that account. To deal with the mailboxes for another account you need to go out of Time Machine, make the other account active and go back in.

Time Machine does not back up all iTunes music files

Hello, I'm trying to view the music files, on my Time Machine backup disc, from a CD that I recently imported into iTunes. My iTunes library resides on my hard drive. The backup disc shows files for some of the other music that is in my iTunes library, but not from the new CD. I did several backups after importing the new music, but the song files still do not show up in Time Machine. Any ideas for why the files don't show up?
My ultimate aim is to copy those music files onto another computer, but my research on the support pages suggests that I should not do it this way. Instead, I will copy the music files onto another disc (not using Time Machine) and then import them onto the other computer. Please confirm that this is the best way to proceed.
But in the meantime, I'm wondering why Time Machine does not show my newly imported music.
Thanks very much for any help you can provide.

New formulation of my question:
A file dated at 10:00 may not appear in the back-up dated 11:00.

Time Machine does not see my external HD

I would like to setup TM but it does not see my external HD, but I can see it on desktop in and finder. I can browse it. But time machine does not see it and forces me to use airport time capsule but I don't have it. Help please.

What format is the external drive in?
If it's formatted for Windows (either using the MBR partition table or using FAT/NTFS volumes) then Time Machine cannot back up to this disk.
The disk needs to be formatted as Mac OS X Extended using either the APM or GPT partition tables.
Life is complicated somewhat by the fact that the OS, in general, can read MBR/FAT drives, but they're not suitable for Time Machine (limitations in the disk formats prevent some of Time Machine's features from working).
You can check the current partition map/disk format in Disk Utility.app - just select the disk on the left and the information will be displayed below. If the disk is using MBR and/or FAT then you'd need to reformat the drive in order to use it with Time Machine.

Time Machine does not restore Aperture library properly

Similar Messages

Maybe you are looking for