Time Machine doesn't back up anymore due to a failure during copying. Get this message for several weeks. And all my back ups are lost!

Can anybody help me, because suddenly all my back ups on the the time capsule are gone, and time machine cannot make any back up due to a failure during copying. I already installed the latest firmware on the time capsule, but nothing seems to help. I also changed the back up disk to the HDD in my Mac (programs and mavericks are running on an SSD. Hope someone can help me out.

Check the TC disk with finder. The sparsebundle should still be there.. simply open it from Finder and mount the backups.
Follow Pondini's instructions to see if your files are there.
Q15 here http://pondini.org/TM/FAQ.html
You don't have to restore the files.. you are just checking the backup is accessible and intact.
http://pondini.org/TM/Troubleshooting.html
I would also recommend you do a verify.. A5 in the reference above.
TM is problematic on Mavericks.. some of the problems are due to its poor networking.
Exactly how is the TC setup?? By that I mean is it wired to the main modem and doing either router or bridge?
Is the computer using wireless to the TC? If not please make sure the wireless connection is via the TC and not via modem router or extender.
I strongly recommend you reset the TC to factory. No files are deleted.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Redo the setup of the TC.. please use all short names, no spaces and pure alphanumeric. Do not use the names the airport utility setup wizard will recommend to you. eg TCgenx (base station name.. x can be a number which is your gen TC). Wireless name.. TCwifi.
Wireless Security will be WPA2 personal and use 10-20 character pure alphanumeric password with mix of case and numbers.
Reset TM as per A4 in the Pondini reference above.
If you still have issues.. manually mount the TC in the computer.. in Finder use Go, Connect to server.
AFP://TCgenx or AFP://10.0.1.1 (where you replace my example name with your actual name.. or replace the IP which is default with your actual IP).
The computer should find the network resource and request a password. Type that in (your disk access password) and save it in the keychain.
Then try again with TM.
Strongly also recommend even if you get TM to work.. it is problematic on Mavericks.. buy CCC or one of the other 3rd party backups.. With CCC you can do a bootable clone to a USB drive.. easily the best way to get a dead Mac going again.

Similar Messages

  • I ereased my external drive now time machine doesn't back up. What should I do?

    I ereased my external drive now time machine doesn't back up. What should I do?  the reason I ereased was because backups wouldn't finsh because of disk error. I did disk repair. Still wouldn't back up so ereased the back up drive. Now nothing appears on it. On the internal drive of my imac in Appllications Timemachine is still there. When I click on it it goes to a screen that looks like a night sky and nothing more happens. Do I need to download some software?

    Time Machine doesn't work on 10.4.7.    It didn't become available until 10.5.   Use a different backup software if you are going to use 10.4.7*:
    http://www.macmaps.com/backup.html

  • TS4036 I haven't used my ipad for several weeks and now it is locked and displaying 'This ipad hasn't been backed up in 2 weeks.  Backups happen when this ipad is plugged in, locked, and connected to Wi-Fi'.  I cannot do anything at all.

    I haven't used my ipad for several weeks and now I can't do anything on it, it seems to be locked and I cannot unlock it.  The screen just seems to be frozen with the following message 'This ipad hasn't been backed up in 2 weeks.  Backups happen when this ipad is plugged in, locked, and connected to WiFi'.  Help please!

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My time capsule worked for several weeks and is now telling me backup disk not available? What to do?

    My time capsule worked for several weeks and now is not backing up. Tells me backup disk not available? Any suggestions?

    This is a lion bug..
    Generally just rebooting the TC will get it back. Otherwise you need to reset the TC and redo its setup.
    Tell us a bit more.. but there is as yet no work around or fix for lion.
    Certain things help.. but wireless is also a weak link. It will generally work better by ethernet.
    Try and get back if it is still bugging you.. I can suggest some other things.. but I do not know of or read a bullet yet.
    (Snow and TC firmware 7.5.2 which I run do not have this issue.. so the bug was introduced with Lion and 7.6 firmware)

  • Time machine doesn't back everything up anymore B-) Part 2

    In an earlier post, now archived so I can't add to it, I was having trouble with TimeMachine on 10.5.8 not backing everything sometimes, notably the contents of my home folder.
    http://discussions.apple.com/message.jspa?messageID=11247368#11247368
    I said it had started working again after a reboot, since then it's done the same thing several times and a reboot always gets it working properly again.
    So I thought that fseventsd must be involved somewhere as it records the changes for TimeMachine to use to create the backups.
    Sure enough, before things start to go awry, fseventsd logs "interesting" things, like last night:
    Jun 30 18:55:32 falstaff fseventsd[38]: callback_client: ERROR: d2fcallbackrpc() => (ipc/send) invalid destination port (268435459) for pid 1802
    then later on after a sleep and wake:
    Jun 30 21:43:15 dhcp102 fseventsd[38]: callback_client: ERROR: d2fcallbackrpc() => (ipc/send) timed out (268435460) for pid 491
    Jun 30 21:43:15 dhcp102 fseventsd[38]: client: 0x810800 : USER DROPPED EVENTS!
    Still later on, the backup worked OK (well it backed lots up!).
    Jul 1 00:04:39 dhcp102 /System/Library/CoreServices/backupd[2987]: Backup requested due to disk attach
    Jul 1 00:04:39 dhcp102 /System/Library/CoreServices/backupd[2987]: Starting standard backup
    Jul 1 00:04:40 dhcp102 /System/Library/CoreServices/backupd[2987]: Backing up to: /Volumes/LaCie/Backups.backupdb
    Jul 1 00:05:37 dhcp102 /System/Library/CoreServices/backupd[2987]: No pre-backup thinning needed: 780.0 MB requested (including padding), 4.08 GB available
    Jul 1 00:08:45 dhcp102 /System/Library/CoreServices/backupd[2987]: Copied 10231 files (608.3 MB) from volume Macintosh HD.
    Jul 1 00:08:47 dhcp102 /System/Library/CoreServices/backupd[2987]: Starting post-backup thinning
    Jul 1 00:10:01 dhcp102 /System/Library/CoreServices/backupd[2987]: Deleted backup /Volumes/LaCie/Backups.backupdb/falstaff/2010-06-01-190823: 3.55 GB now available
    Jul 1 00:10:01 dhcp102 /System/Library/CoreServices/backupd[2987]: Post-back up thinning complete: 1 expired backups removed
    Jul 1 00:10:02 dhcp102 /System/Library/CoreServices/backupd[2987]: Backup completed successfully.
    But tonight when I got home from a day's use of the system at work, I got this:
    Jul 1 20:13:19 dhcp102 /System/Library/CoreServices/backupd[4848]: Backup requested due to disk attach
    Jul 1 20:13:19 dhcp102 /System/Library/CoreServices/backupd[4848]: Starting standard backup
    Jul 1 20:13:20 dhcp102 /System/Library/CoreServices/backupd[4848]: Backing up to: /Volumes/LaCie/Backups.backupdb
    Jul 1 20:13:29 dhcp102 /System/Library/CoreServices/backupd[4848]: No pre-backup thinning needed: 100.0 MB requested (including padding), 3.55 GB available
    Jul 1 20:13:29 dhcp102 /System/Library/CoreServices/backupd[4848]: Waiting for index to be ready (906 > 0)
    Jul 1 20:13:55 dhcp102 /System/Library/CoreServices/backupd[4848]: Copied 393 files (398 KB) from volume Macintosh HD.
    Jul 1 20:13:55 dhcp102 /System/Library/CoreServices/backupd[4848]: No pre-backup thinning needed: 100.0 MB requested (including padding), 3.55 GB available
    Jul 1 20:13:56 dhcp102 /System/Library/CoreServices/backupd[4848]: Copied 8 files (93 bytes) from volume Macintosh HD.
    Jul 1 20:13:56 dhcp102 /System/Library/CoreServices/backupd[4848]: Starting post-backup thinning
    Jul 1 20:13:56 dhcp102 /System/Library/CoreServices/backupd[4848]: No post-back up thinning needed: no expired backups exist
    Jul 1 20:13:56 dhcp102 /System/Library/CoreServices/backupd[4848]: Backup completed successfully.
    Jul 1 20:14:17 dhcp102 fseventsd[38]: expected to read 65536 bytes but only got 0 from /.fseventsd/00000000eb6cafa8
    and none of my home folder got backed up. So I rebooted and immediately re-did the backup:
    Jul 1 20:15:45 falstaff fseventsd[38]: bumping event counter to: 0xeb6dc3a6 (current 0x0) from log file '00000000eb6cafa8'
    Jul 1 20:19:20 dhcp102 /System/Library/CoreServices/backupd[210]: Backup requested by user
    Jul 1 20:19:20 dhcp102 /System/Library/CoreServices/backupd[210]: Starting standard backup
    Jul 1 20:19:20 dhcp102 /System/Library/CoreServices/backupd[210]: Backing up to: /Volumes/LaCie/Backups.backupdb
    Jul 1 20:19:54 dhcp102 /System/Library/CoreServices/backupd[210]: No pre-backup thinning needed: 100.0 MB requested (including padding), 3.55 GB available
    Jul 1 20:21:10 dhcp102 /System/Library/CoreServices/backupd[210]: Copied 4606 files (14.4 MB) from volume Macintosh HD.
    Jul 1 20:21:11 dhcp102 /System/Library/CoreServices/backupd[210]: Starting post-backup thinning
    Jul 1 20:21:11 dhcp102 /System/Library/CoreServices/backupd[210]: No post-back up thinning needed: no expired backups exist
    Jul 1 20:21:11 dhcp102 /System/Library/CoreServices/backupd[210]: Backup completed successfully.
    And my home folder was backed up.
    Ideas?
    Dave

    DaveHill wrote:
    So I thought that fseventsd must be involved somewhere as it records the changes for TimeMachine to use to create the backups.
    Correct, most of the time.
    Jun 30 21:43:15 dhcp102 fseventsd[38]: client: 0x810800 : USER DROPPED EVENTS!
    I don't think the earlier messages indicate much, if any, of a problem, but this one likely does.
    Jul 1 20:15:45 falstaff fseventsd[38]: bumping event counter to: 0xeb6dc3a6 (current 0x0) from log file '00000000eb6cafa8'
    Yes, something wrong with the event log still/again.
    Ideas?
    It does look like something going wrong with the event log. Just what isn't so clear.
    I'd start by booting from your Leopard Install disc and repairing the internal HD, per #A5 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).
    While you're at it, you might do the same on your backups, just to be sure they're ok, too.
    When you reboot and run the next backup, Time Machine should log a UUID message about your internal HD, and do a "deep traversal." That will ignore the event log, instead comparing everything on your system to your backups, to be sure they match. That should "catch up" anything missed earlier.
    Subsequent backups should revert to using the event log. Keep an eye on the messages (see #A1 in Troubleshooting for a handy widget); if the event log errors continue, something else is clearly wrong.

  • Time machine doesn't back everything up anymore B-)

    I have two computers, a Macbook Pro and a Mac Mini, both running 10.5.8. Both have external firewire drives (a LaCie on the Macbook Pro and an Iomega on the Mac Mini) and in both cases Time Machine has stopped backing everything up - it does all the right things but the number of files backed up is small.
    I'll ask separately at this point, as the fixes may be different for each one and it will get confusing (to me and everyone else!).
    The MacBook Pro backs up to a LaCie 250Gb external firewire drive. It used to work happily (since 2008) until last month (approx), now when I connect it it backs up normally but quite often nothing in the /Users/ directories gets backed up. Maybe about the time I upgraded from Aperture 2 to Aperture 3.
    Here's an example from this morning from the system log:
    Mar 20 10:00:53 dhcp102 /System/Library/CoreServices/backupd[19205]: Backup requested by user
    Mar 20 10:00:53 dhcp102 /System/Library/CoreServices/backupd[19205]: Starting standard backup
    Mar 20 10:00:54 dhcp102 /System/Library/CoreServices/backupd[19205]: Backing up to: /Volumes/LaCie/Backups.backupdb
    Mar 20 10:01:11 dhcp102 /System/Library/CoreServices/backupd[19205]: No pre-backup thinning needed: 102.9 MB requested (including padding), 8.36 GB available
    Mar 20 10:01:43 dhcp102 /System/Library/CoreServices/backupd[19205]: Copied 465 files (10.6 MB) from volume Macintosh HD.
    Mar 20 10:01:43 dhcp102 /System/Library/CoreServices/backupd[19205]: No pre-backup thinning needed: 100.0 MB requested (including padding), 8.35 GB available
    Mar 20 10:01:44 dhcp102 /System/Library/CoreServices/backupd[19205]: Copied 62 files (93 bytes) from volume Macintosh HD.
    Mar 20 10:01:46 dhcp102 /System/Library/CoreServices/backupd[19205]: Starting post-backup thinning
    Mar 20 10:01:48 dhcp102 /System/Library/CoreServices/backupd[19205]: Deleted backup /Volumes/LaCie/Backups.backupdb/falstaff/2010-03-13-113744: 8.35 GB now available
    Mar 20 10:01:50 dhcp102 /System/Library/CoreServices/backupd[19205]: Deleted backup /Volumes/LaCie/Backups.backupdb/falstaff/2010-03-13-113622: 8.35 GB now available
    Mar 20 10:01:51 dhcp102 /System/Library/CoreServices/backupd[19205]: Deleted backup /Volumes/LaCie/Backups.backupdb/falstaff/2010-03-13-113500: 8.35 GB now available
    Mar 20 10:01:52 dhcp102 /System/Library/CoreServices/backupd[19205]: Deleted backup /Volumes/LaCie/Backups.backupdb/falstaff/2010-03-13-101432: 8.35 GB now available
    Mar 20 10:01:52 dhcp102 /System/Library/CoreServices/backupd[19205]: Post-back up thinning complete: 4 expired backups removed
    Mar 20 10:01:52 dhcp102 /System/Library/CoreServices/backupd[19205]: Backup completed successfully.
    Mar 20 10:02:11 dhcp102 /System/Library/CoreServices/backupd[19205]: Stopping backupd to allow ejection of backup destination disk!
    (the previous backup was 18th March at 20:30, since then I used the machine all day at work, reading mail, rss feeds etc).
    But if I look at the backup using TimeTracker nothing got backed up in the /Users/ directories, especially in the "Pictures" directory where my Aperture 3 library and vaults live.
    Interestingly, just now, I rebooted after installing the latest version of "little snitch" and when I re-attached the LaCie disk it backed up a lot more, but still not the Aperture Library and vaults.
    Mar 20 12:07:18 dhcp102 /System/Library/CoreServices/backupd[437]: Backup requested due to disk attach
    Mar 20 12:07:18 dhcp102 /System/Library/CoreServices/backupd[437]: Starting standard backup
    Mar 20 12:07:20 dhcp102 /System/Library/CoreServices/backupd[437]: Backing up to: /Volumes/LaCie/Backups.backupdb
    Mar 20 12:07:43 dhcp102 /System/Library/CoreServices/backupd[437]: No pre-backup thinning needed: 151.0 MB requested (including padding), 8.35 GB available
    Mar 20 12:11:29 dhcp102 /System/Library/CoreServices/backupd[437]: Copied 3452 files (660.6 MB) from volume Macintosh HD.
    Mar 20 12:11:37 dhcp102 /System/Library/CoreServices/backupd[437]: No pre-backup thinning needed: 100.0 MB requested (including padding), 7.68 GB available
    Mar 20 12:11:43 dhcp102 /System/Library/CoreServices/backupd[437]: Copied 588 files (14 KB) from volume Macintosh HD.
    Mar 20 12:11:46 dhcp102 /System/Library/CoreServices/backupd[437]: Starting post-backup thinning
    Mar 20 12:11:46 dhcp102 /System/Library/CoreServices/backupd[437]: No post-back up thinning needed: no expired backups exist
    Mar 20 12:11:46 dhcp102 /System/Library/CoreServices/backupd[437]: Backup completed successfully.
    It estimated 151Mb but actually backed up 660Mb!
    If I look at TM restore, my Aperture Library hasn't been backed up since 1st March, even though I added some photos Thursday night.
    I have just copied two jpeg files into the Pictures folder, that seems to have triggered it into
    backing up 4.6Gb worth of Aperture Library, but not the Aperture Vault.
    Mar 20 12:26:09 dhcp102 /System/Library/CoreServices/backupd[494]: Backup requested by user
    Mar 20 12:26:09 dhcp102 /System/Library/CoreServices/backupd[494]: Starting standard backup
    Mar 20 12:26:09 dhcp102 /System/Library/CoreServices/backupd[494]: Backing up to: /Volumes/LaCie/Backups.backupdb
    Mar 20 12:26:16 dhcp102 /System/Library/CoreServices/backupd[494]: No pre-backup thinning needed: 100.0 MB requested (including padding), 7.68 GB available
    Mar 20 12:31:08 dhcp102 /System/Library/CoreServices/backupd[494]: Copied 628 files (4.6 GB) from volume Macintosh HD.
    Mar 20 12:31:09 dhcp102 /System/Library/CoreServices/backupd[494]: No pre-backup thinning needed: 100.0 MB requested (including padding), 3.04 GB available
    Mar 20 12:31:09 dhcp102 /System/Library/CoreServices/backupd[494]: Copied 498 files (54 KB) from volume Macintosh HD.
    Mar 20 12:31:10 dhcp102 /System/Library/CoreServices/backupd[494]: Starting post-backup thinning
    Mar 20 12:31:10 dhcp102 /System/Library/CoreServices/backupd[494]: No post-back up thinning needed: no expired backups exist
    Mar 20 12:31:10 dhcp102 /System/Library/CoreServices/backupd[494]: Backup completed successfully.
    I have run disk verify and permissions verify on the startup disk, and disk verify on the LaCie disk, I have also tried a time machine reset (several times) and a spotlight re-index (several times). I have nothing excluded in TM or Spotlight.
    Confused,
    Dave

    Hi. Sorry for the delay, work always gets in the way!
    See #D5....
    Already checked the exclude list, have also tried a full reset.
    That said, I mentioned above that TM seemed to have started working again, it has continued to work since. I had done a verify on the disk(s) and not restarted afterwards, I wonder if the SL bug also applies to Leopard - it did seem to start working after the reboot.
    I'll keep an eye on it and see if it happens again.

  • Time Machine doesn't back up newest items

    I have done the first round of time machine where it backs up everything on my mac- now when it backs up, it tells me it is backing up, but I don't see my newest files, photos, music, anywhere on the backup disc. what is happening? doing it manually just puts my entire photo library back onto the external HD again which would take forever. someone please HELP! thanks for your time

    Having the same problem. Initial Time Machine backup goes fine. After that, no new files are backed up. I've reformated the external/Time Machine drive twice now.
    Can someone suggest something. I've tried everything. No nothing is excluded, Time Machine does automatic/scheduled and manual backups just fine, but it doesn't actually appear to be backing up any new information.

  • Time machine doesn't back up Win OS installed in Parallels.

    My mac has just been restored from Mac OS 10.9.5 crash. Well i have a time machine backup by which i got my data restored but time machine failed to restore Windows 8 originally installed on parallels before OS crash. Is there any other settings to be marked that i recover WIN OS from time machine back up.
    Regards
    Yash Panchal

    You need to backup virtual machines manually, outside of Time Machine. The way those things work, if you used them with Time Machine you would have a 40GB backup every hour. That would get old fast and fill up your Time Machine with useless junk.

  • What is in Time Machine's older back ups?

    Okay, so Time Machine keeps a weekly version after a few weeks, rather than a daily or hourly version.
    Which files is it keeping? Is it the last version of document that week? If a file was trashed and deleted early in the week, does it show up in that week's backup?
    Is there a document somewhere that says how Time Machine makes these calls?
    Thanks

    Time Machine progressively deletes the hourly backups it makes, keeping the first backup (if any) of any day for about 30 days and then the first backup of each week thereafter until the disk is full.
    Knowing which backup will be held as the 'daily' is easy enough but, in my experience, if Time Machine doesn't make a backup on the day that would otherwise represent the 'weekly' backup, the following 'weekly' backups become a little unpredictable for a week or to as to which 'daily' will be retained.

  • Time Machine doesn't back everything up

    Having a quirky issue with Time Machine - it's only backing up the 'Users' folder from the OS hard drive, not the 'Applications', 'Library' or 'System' folders. Therefore, if I ever needed it to reinstall it wouldn't have enough of the data.
    Any ideas how to tell Time Machine to back up all folders on the OS drive? Nothing I can see in Time Machine settings/preferences with such an option...
    For info, the OS is on a 250GB inernal SSD and Time Machine is backing up to a 2TB external drive.
    Thanks!

    Just as an update, I tried deleting the com.apple.TimeMachine.plist preferences file and effectively 'resetting' Time Machine but it made no difference. I ran the diagnostic and reported it as a Bug to Apple. For your info, details of report are below.
    Thanks
    Andy
    20-Aug-2013 10:42 AM Andy Worby:
    Summary:
    Time Machine is failing to back up all top-level folders present on the main OS hard disc, even though they do not appear in the 'Exclusions' list within Time Machine preferences. As a result, 'System', 'Library' and 'Applications' top-level folders are not backed up. The only folder being backed up is 'Users'.
    Upon investigation, the com.apple.TimeMachine.plist preferences file contains exclusions for above mentioned top-level folders (see screenshot 1), although they have 'not' been purposefully added to the 'Exclusions' list via the Time Machine preferences window.
    Deleting the com.apple.TimeMachine.plist preferences file and then setting up Time Machine once again via the preferences window does not change the result - the three affected folders still fail to back up.
    Steps to Reproduce:
    1. Delete com.apple.TimeMachine.plist preferences file to perform a full reset of Time Machine.
    2. Enter Time Machine preferences window.
    3. Select backup hard disc ( in this case, I am using an external 2TB hard disc via Firewire 800 connection).
    4. Click options
    5. Ensure that only the backup hard disc is selected in 'Exclusions' list.
    6. Click Save
    7. Commence a Time Machine backup.
    8. Allow backup process to complete.
    9. Go directly into the backup hard disc.
    10. View top-level folders that have been backed up from the OS hard disc.
    Expected Results:
    All top-level folders from the OS hard disc should have been backed up.
    Actual Results:
    Only the 'Users' top-level folder from the OS hard disc has been backed up.
    Regression:
    Problem is continuous, and has occurred for some time, although I do not know from which exact date.
    Notes:
    I have included the following attachments:
    1. Study iMac.tmdiagnostic.zip
    2.Screen shot 1 - this is a screenshot of the Time Machine preferences file
    3. Screen shot 2 - this is a screenshot of the top level folders within my OS hard disc

  • Time Machine doesn't back up system disk but does complete second disk

    I have set up Time Machine to back up my system disk and one additional internal drive. Two other internal drives are excluded. The backup disk is external. On the initial backup Time Machine gets only one file from the system drive even though it has recognized that there are 121.5 GB included on that drive, but it backs up all 133 GB from the second drive. BTW, I haven't excluded anything but the two other drives. Here's the log from TM Buddy:
    Starting standard backup
    Backing up to: /Volumes/Backup/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Event store UUIDs don't match for volume: Aeronomy1
    Backup content size: 121.5 GB excluded items size: 3.5 MB for volume Macintosh HD
    Backup content size: 133.6 GB excluded items size: 0 bytes for volume Aeronomy1
    No pre-backup thinning needed: 311.66 GB requested (including padding), 792.03 GB available
    Copied 1 files (0 bytes) from volume Macintosh HD.
    Copied 2411 files (133.4 GB) from volume Aeronomy1.
    Starting post-backup thinning
    No post-back up thinning needed: no expired backups exist
    Backup completed successfully.
    I've double-checked that the drive and partition are properly formatted with a GUID partition table. The only thing I can't do is turn off the antivirus for the backup drive--the system administrator has eliminated the ability to modify the Symantec Antivirus app. But since it is working in general, it wouldn't seem that is an issue.
    Any help is appreciated for getting my main drive backed up!

    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • Time machine doesn't back up all the estimated files

    Ran Time machine for the first time today. The back up is on a seperate harddrive. It estimated about 93 gigs (I had room for 125 gigs on the partitioned drive), but suddenly stopped when it got to about 63 gigs. It acted like everything is just fine.  I had no exclusions except for a few hard drives plugged in, everything else is fine for back up. I use Lion and my computer is about two years old. Please help

    Just a suggestion, but try entering Time Machine using the application and see if you can find any of the missing data. If so, see if you can restore it.
    If you have 1.5 TB of data, you really need a bigger backup drive. The rule of thumb is 2 to 4 times your data. You should also have more than one backup. Either another Time Machine drive or a clone.
    Clone  - Carbon Copy Cloner          (Often recommended as it has more features than some others)
    Clone – Data Backup
    Clone – Deja Vu
    Clone  - SuperDuper
    Clone - Synk
    Clone Software – 6 Applications Tested
    Commonly Used Backup Methods

  • Time Machine short term back  ups?

    HI
    I've had some Time Machine problems for a while now - I have a 2 TB drive I use and I back up to this using TM. The problem is when I enter Time machine it only shows back ups up to about 2 or 3 weeks ago...? Why would it do that - where are my back ups from a month or two ago???
    Any help is much appreciate.
    thanks
    Rob
    iMac 24 running Lion.
    2.4ghz intel core 2
    4gb ram

    I've got to say figuring out what hardware to purchase for original archiving AND Time Machine backups—for that and one laptop have been a nightmare. First we went the NAS Synology route as recommended by an Apple Store employee. Then last week found out that this would corrupt our huge 150 gigs iPhoto library (if not now at some point). So, have been reading boards, calling apple and spent another two hours in the Apple store today. Two hours (with my family)! Far too many hours wasted on what should be a simple user experience to explain/help users with.
    Unfortunately this is what I learned...
    Every Apple employee has a different take. I've spoken in person with four Apple Store employees on two different occassions, read the board "experts" here and phoned  Apple but get different insight/answers each and every time.
    We were prepared to walk out with a Time Capsule (for Time Machine) and one HD for our need—but two employees today said we didn't need a Time Capsule. Instead they both suggested two HDs (with one acting as a dedicated Time Machine) because we had an Airport Extreme. And we could do wifi backups no problem—and the HD would be accessible via wifi (when plugged into the Airport Extreme). So, we walked out with the a 2T and 3T Seagate HDs—and have spent hours on reorganizing yet again.
    And now I am reading that not only does Mountain Lion not support this usage—and I must manually plug in both HDs (the Time Machine and original archive) for backups on a laptop. Or rather to ensure Time Machine backups (that contain the external HD content) are not deleted. 
    THIS RATHER MANUAL SCENARIO DEFEATS THE PURPOSE OF A LAPTOP (free of teathering and wires—it's stored on a coffee table not desk). I don't get it?!? So-so annoyed.
    There should be a way to "lock" the external HD data so this doesn't happen. 

  • Retrieve Time Machine old deleted back-ups

    Hi,
    My disk was running out of space as time machine was backing up but it also 'deleted old back ups' Is there any way to retrive these ?
    Thanks
    Ken

    I've got to say figuring out what hardware to purchase for original archiving AND Time Machine backups—for that and one laptop have been a nightmare. First we went the NAS Synology route as recommended by an Apple Store employee. Then last week found out that this would corrupt our huge 150 gigs iPhoto library (if not now at some point). So, have been reading boards, calling apple and spent another two hours in the Apple store today. Two hours (with my family)! Far too many hours wasted on what should be a simple user experience to explain/help users with.
    Unfortunately this is what I learned...
    Every Apple employee has a different take. I've spoken in person with four Apple Store employees on two different occassions, read the board "experts" here and phoned  Apple but get different insight/answers each and every time.
    We were prepared to walk out with a Time Capsule (for Time Machine) and one HD for our need—but two employees today said we didn't need a Time Capsule. Instead they both suggested two HDs (with one acting as a dedicated Time Machine) because we had an Airport Extreme. And we could do wifi backups no problem—and the HD would be accessible via wifi (when plugged into the Airport Extreme). So, we walked out with the a 2T and 3T Seagate HDs—and have spent hours on reorganizing yet again.
    And now I am reading that not only does Mountain Lion not support this usage—and I must manually plug in both HDs (the Time Machine and original archive) for backups on a laptop. Or rather to ensure Time Machine backups (that contain the external HD content) are not deleted. 
    THIS RATHER MANUAL SCENARIO DEFEATS THE PURPOSE OF A LAPTOP (free of teathering and wires—it's stored on a coffee table not desk). I don't get it?!? So-so annoyed.
    There should be a way to "lock" the external HD data so this doesn't happen. 

  • HT3275 I am getting a message that the backup failed because the "sparsebundle is already in use."  My husband and I both have MacBooks that back up to one time machine.  It is also our wifi router.  I do not understand this message

    I am getting the message that "the backup disk image '/volumes//data/ ---'s MacBook pro.sparsebundle" is already in use.  ---"s is my administrator designation.  I don't know what this means or what I should do.  My husband and I both use the same time machine with our MacBooks.  It is our router for our home network although for the most part our computers are separate.  We share an email site, and some files.  I am concerned that we are not backed up securely

    Most common message in history of the TC.. something has failed to unmount.. Lion and esp. Mountain Lion are affected.
    Simple way.. reboot the TC to lose the connections..
    Might take a network reboot.
    That means restart the whole network from off.. start in order, modem.. router/TC.. clients. 2min gap between them.
    But from 5.6 utility you can disconnnect all users.
    Read C12 here. http://pondini.org/TM/Troubleshooting.html

Maybe you are looking for

  • How to separate Apple IDs

    Hi, I originally created my apple ID a few years ago, let's call this [email protected] I've purchased quite a number of apps etc on this account. I've now created an apple ID (example@icloud) and I think they're both linked together. I've been tryin

  • Re installing Xcelsius 4.5 on a new computer

    Hi, I've been trying to re install the program for a couple of weeks in vain.  I sent an email to the bosap help team, and they kindly sent me a link where I can attempt to download - but when I try to run it it just does not work. I actually see the

  • Can we draw a RECTANGLE of  1.5 (fractional ) height ??

    hi , I am designing an GUI for scollbar for list elements ( may vary from 1- 2000 elements ) .For a better designing option , i want to draw a rectangle of fractional hieght ( say 1.5 ). can anyone tell me, is it possible to draw such a rectangle .

  • Forms 6i post query

    dear people I have form with button for print the current , and i want this button to be enabled for some records and not enabled for some other records i do it in post query, but when i try to make back and return to previous records, the button not

  • IMovie to handle multiple video tracks?

    Would iMovie also be able to handle multiple video track? (like in a split screen format, but not in the form of the template)