Time Machine doesn't recognize old backup after logic board replacement

I recently had my logic board on my MacBook Pro replaced and when I tried to backup, Time Machine did not recognize the old backup on the drive and tries to create a new one. The drive is mounted fine.
Is there a way to continue using my old backup, or do I need to delete it and create a new one?

lissy-loo wrote:
Hi there I've just had this problem on my computer too but is there a possibly easier way to explain what is on this site...
http://www.macosxhints.com/article.php?story=20080128003716101
I read through but got lost about half way down when it says:
"The last bit of information needed is the old MAC address. Open Terminal and change directory to the root of the Time Machine backup database, then get the old MAC address:...."
I was in terminal but couldn't work it out. Is this not a good idea to stumble around in if i have no idea what I'm doing? Seems difficult but I really wanna work it out because my Time Machine hard drive is full so I can't just get to back up everything from scratch and don't wanna delete what is already on there. Any help would be much appreciated!!
Hi, and welcome to the forums.
If you're not comfortable with the procedure, I'd advise against it. Mucking about with Terminal can cause all manner of problems.
But you can find your Mac's Ethernet Address via the *System Profiler* app. Click the Apple logo in your menubar, then +About This Mac,+ then +More Info+ to start it.
Select Network in the sidebar, then Ethernet in the upper panel. Near the bottom of the lower panel, under Ethernet, you should see *Mac Address.* It's 6 hex numbers (12 characters), separated by colons. Omit the colons when you type it into Terminal.
As noted in the Troubleshooting Tip, it's easy to do this wrong, get no error message, and have it not work (been there, done that!).
If it doesn't work, your only choices are to erase the drive and start over, or get a larger one and transfer your backups to it (see item #18 in the Frequently Asked Questions *User Tip* at the top of this forum).
How big is your TM drive, vs. how much it's backing up? TM usually needs 2-3 times the space of what it's backing-up (see item #1 of the FAQ Tip).
Are you so concerned about not losing your backups because you've been deleting things from your internal HD, relying on TM to keep it's copies? If so, post back -- that's a terrible idea.

Similar Messages

  • Time Machine doesn't recognize old sparsebundle after new logic board

    Installed new logic board in pre-Isight 20" iMac due to capacitor swelling and kernel panic. I had also erased the internal HD. I was able to restore all my files to internal HD from Time Machine backup on the 1TB Time Capsule. Now I'm trying to back up my restored iMac to Time Capsule, but there is insufficient space. Time Capsule has three sparsebundle files: one for the 20"iMac prior to new logic board, one for a Powerbook, and one for a newer 24"iMac. Time Machine wants to create a new sparsebundle for the restored iMac, but there is not enough room and I would like it use the residing sparsebundle so that I will have backups prior to the point the new logic board was installed. I tried just changing the name of the old IMac Time Capsule sparsebundle file to the new sparsebundle filename that Time Machine creates when attempting backup, but that did not work. Any suggestions?

    1. I thought of just deleting the old sparsebundle in order to make room, but it was a less elegant solution because: a) I'd have to do a complete (i.e. lengthy) backup when really only a few things have changed (mostly software updates) since the restore. b)if something should go wrong with that process, then I've lost my backup file to restore the computer. True, I could archive the old sparsebundle to another drive, and then delete it from the time capsule, but somehow I think there should be a quicker, less labor intensive way that doesn't involve bringing in another hard drive.
    2. I believe you can restore any Mac with any time machine backup. If you boot from the system disk, go to utilities, and select restore from time machine backup, it then allows you to pick any of the files on the disk that time machine has backed up to. After all, even though Time Machine thinks this is a new computer, the restore that I just did makes it essentially the same computer that I had before the failure of the logic board--the desktop looks exactly the same. BTW, the Apple authorized service center that did the logic board replacement had put a clean version of 10.6 on the internal hard drive, and I was unable to use that system to do the restore--it just hung up. I had to do the restore using my system disk CD (and basically downgrading to system 10.5.8)

  • Time Machine Doesn't Recognize Old Backups

    1) Had a mid-2010 27" iMac with Snow Leopard on it.
    2) Upgraded Snow Leopard to Lion. Lion recognized time machine disk like it should and backed up like it should. I was able to retain my backups I've had since 2008.
    3) This iMac had a hardware issue that prompted the purchase of a new iMac. Plugged time machine into this new iMac today and recovered system like I expected it to.
    4) Problem: I can't access my old backup sets. Time machine wants to start from scratch.
    Is there a work-around? Do I WANT a work around. In other words, if I can fix this so that Time machine "picks up" where I left off, will it cause problems later?

    I'll refer you to Pondini's site. See section B 5 & 6.
    http://pondini.org/TM/Troubleshooting.html

  • Time machine doesn't recognize old time machine backups after new drive

    After getting my original hard drive replaced on apple care. Time machine refuses to recognize time machine backups dating back to October when I first installed Leopard. The Records are there on an "off-board" Lacie drive. Any fixes for this? I have had so many problems with Time Machine I am afraid to turn it back on. Last time it took over 40 hours to do an initial back-up.

    Yes I had been having multiple problems and once saved the entire system in archive and install and also time machine had been active since October when I first installed it. all of this was saved to an off-board Lacie drive I can find the old time machine files easily enough but time machine since the new drive, does not recognize them. Since I got the drive back with tiger installed, I first had to re-install Leopard so I don't know if that caused Time machine to start over . I did do an archive and install at that time but there was nothing really to archive since they had not recovered my old files. If this wasn't bad enough The Technician replaced my administrator password with his own and the was off for a few days and I couldn't do anything for awhile. You have been very helpful thank you for your time on my behalf.
    Respectfully,
    Thomas Carlisle

  • Time Machine doesn't recognize past backups anymore

    My Macbook pro just came back from being repaired (issue with the video display).
    I think they had to replace the logic board or graphics card or both - but I'm not sure.
    Everything works fine now... except for Time Machine.
    Before the Macbook Pro was shipped off I would backup regularly to an external hard drive.
    While my Macbook was gone I had to use some of the backup files from within the Backups.backupdb file system. So on my Powerbook G4 with Tiger I had to go in manually and copy files over. No big deal... or so I thought.
    Now Time Machine does not recognize the past backups from before I shipped the MacbookPro.
    It just wants to start an entirely new backup again.
    Is there a way I can get Time Machine to recognize my old backup again?
    I'd hate to have to go in manually from now on. It's not exactly convenient.
    Any help would be greatly appreciated.

    OK, I didn't explain that well...
    So here is what I'm typing in and what I'm getting back (the name of my computer being "Jason Argo's Computer":
    Last login: Thu Jul 17 22:22:16 on ttys000
    Macintosh:~ Jason$ cd /Volumes/Chubs/Backups.backupdb
    Macintosh:Backups.backupdb Jason$ xattr -p com.apple.backupd.BackupMachineAddress Jason Taylor's Computer
    I don't know why but I'm getting nothing back now. Before I was getting errors saying no such directory exists. I've typed in ls as well and get nothing.
    Any ideas?

  • Time machine doesn't delete old backups when disk is full

    TM disk is 750GB. It tells me there is not enough room for backup…then I look into TM and find there ARE NO BACKUPS anymore. (There were a few days ago.) All backups are gone, except for one two days ago, which was when I began getting the "no room" error.
    I assume I've lost everything, as the TM disk shows only the backup from 2 days ago. True?
    Do I just format and start again?
    Is there a fix for this "no room" message? (It says oldest backups are deleted when disk becomes full. But it doesn't do it.)
    Do people rely on this?

    How much data is TM backing-up? (What's shown for +Estimated size of full backup+ under the exclusions box in TM Preferences > Options?)
    Note that your Time Machine disk should, in most cases, be at least twice the size of the data it's backing-up. See #1 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
    It appears that Time Machine needed to do a large backup, perhaps a full one, for some reason, and deleted as many old backups as it could (but it won't ever delete the last remaining one, as that would leave you with no backup at all), trying to make room.
    If in doubt, Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the backup in question, then copy and post all the messages for that run here, along with the amount of data that TM is backing-up.

  • Had to reset TC, Time Machine won't recognize old backups

    Two problems really. Firmware "update" was a disaster, forcing several resets of TC and creation, eventually, of a new name. First problem is that when I start up Time Machine, it won't recognize the backups that were already made of the drive on the TC. Second problem is that it says I only have about 1/2 of the capacity left in the TC drive. It seems that it is treating the old backup files as a large unrecognizable file that it will not delete. Optimum solution would be for TM to continue backing up my hard drive on the backups already created by TM on my newly named TC. If that can't be done, can I at least erase those old backups so that the TC has the maximum capacity to start backing up again from this point forward. Thanks for any help.

    To Reformat the TC Hard Disk:
    Go to Airport Utility --> Manual Setup --> Disks --> Highlight "Time Capsule Disk" on the left --> Select "Erase" on the right.

  • Time Machine does not recognize older backups after restore

    Leopard Server OSX.5.8, Mac Mini Intel
    After a severe failure I had to restore the server (I used a fresh, spare Mini to restore to) from a Time Machine backup.
    Everything went fine so far.
    I tried to continue the backup on the same external harddrive, but the backup history is no more recognized by Time Machine, it want to backup the whole drive from the beginning.
    The disk is full which is normally not a problem, as Time Machine deletes the oldest backups to deallocate space.
    I don't want to lose the old history. What can be done to make Time Machine using this backup set again?

    Hi Pondini,
    I got it fixed today, thank you everyone for your help. The thing that ended up fixing it was deleting the hidden files ".com.apple.timemachine.supported" and ".002332b4a7fc" on the root directory of the time machine disk. Now my months worth of backups are viewable again!
    I didn't find this on your website (maybe I didn't look hard enough). If it's not there, perhaps it would be a good thing to add to your site? Hopefully it will save a few people some frustration! Thanks for making the site - it looks like a great resource.
    --Hayden

  • Time Machine doesn't recognize my backups now that I restored from it.

    After installing Lion 7.1 from the app store overy my Snow Leopard, my mid-2009 2.8 GHz MBP (15") started acting wonky . . . Would freeze up randomly, need to be hard-reset, would open up windows on boot-up that I DID NOT have open before (even if I unchecked the option to "re-open windows when logging back in"), would not remember certain preferences, etc.
    Called Apple tech, all he could suggest was format/reinstall using the fun, new recovery feature in Lion, if the 7.2 update didn't somehow magically fix my problems. It didn't, so I made sure my time machine back-up was complete, booted into recovery, wiped the Macintosh HD, and re-installed Lion from the web. Took forever, but no problems, so I get to the part where I want to recover from Time Machine, and say to restore everything expcept my settings (in case something from settings before was causing the issues). It does all of this, no problem, and I log into my Mac and everything looks the same as before.
    NOW, Time Machine wants to back-up, as usual, and I think it will look at the system and say, "Oh, yeah, I've got all this . . . I mean, you just restored from me, so I'll just take a few snapshots or whatever and back up every hour (or whatever I do)." But Time Machine ain't saying that. Time Machine says," Oh, you have a bunch of crap on this hard drive already, but I need more room to back up your computer." And I'm saying, "No buddy, that's not a bunch of crap, that IS the back-up of this computer. Just reference that!"
    Except, see, I'm SAYING that to my computer . . . But it can't hear me, obviously. How do I get my computer to understand that I don't need a new back-up from scracth, that the hard-drive I restored from IS the TM backup?
    Sorry for not being able to explain this problem more efficiently. Thanks in advance.

    Oh yeah, and the other thing is, now I CAN'T go back in time using my Time Machine back-up . . . It says I've never backed up now (I guess because this is a fresh install that's TECHNICALLY correct), but I restored from this Time Machine file . . . Surely I've done something wrong that can be fixed. Help, please?

  • Time Machine won't show old backups after reformat

    Hi there -
    So I have a time machine backup that I made about 1 year ago. I have let it do its thing, backing up files automatically every hour. I decided to reformat my computer to start fresh before downloading Lion, so I unhooked my external drive and went to work. The install went fine, but now my old time machine backups are gone!
    For example, I will go into my Pictures folder, then enter time machine, I can only go back to July 18th, 2011. Previous to me reformatting my computer, I had no problem going as far back as I wanted. Now all of a sudden, I can't do that any more!
    I have NO idea what's going on, and NO idea how to fix this. I've exhausted myself reading through the communities trying to get support, but to no avail.
    Hopefully someone can help!

    Many, many weeks ago there were articles (MacWorld and others) that described how to check and see if you had any PowerPC apps.  It was stated that these apps would not work with Lion because Rosetta, which they require, will no longer be supported.  Here is how you check.  Hold down Option and click the Apple in the upper left.   While holding Option click System Profiler.  Under Software, click Applications and wait for the list to load.  Toward the right side of the window click the column header called "Kind" to sort the column.  Scroll the column to see if you have any Power PC apps.  If  you do, they won't work in Lion.
    Regarding  your Office 2004...... I do know that the new version of Office will work.
    Hope this is helpful.

  • Time Machine doesn't delete old backups

    Hi,
    I keep getting errors from the TM backup that the disk for backup is full. It appears that TM doesn't delete the old backups that are on the disk. Any idea why it is not deleting the backups to make space? I also checked the button to notify me when deleting....useless....I am using Lion/Mountain Lion
    Thanks

    When you have issues of this sort.. Pondini is your man..
    See http://pondini.org/TM/Troubleshooting.html
    There is no need for admin / Root / SU login to TM.. that will not achieve anything.
    You can delete the current set of TM preferences and start over.. See A4.
    You have to delete the whole existing backup to start over. Or archive it off as I said if you want historical record, and erase the disk. 
    You erase the TC by using Airport Utility, under disk is erase option.. that is the fastest way. A quick erase via AU takes about 1min. Do use any other erase option, as they will take several hours.
    You can also delete a sparsebundle.. but it is a long and time consuming process. That is important though if you have multiple backups on the TC you do not wish to lose.
    See Q12 here http://pondini.org/TM/FAQ.html
    There are many many posts about how to speed up deletion of large backups.
    eg https://discussions.apple.com/thread/2224110?tstart=0

  • Time Machine won't recognize old backups

    I have an external hard drive with about a dozen backups on it. I tried to backup today, and instead of looking at the last back up, from a few weeks ago, and updating from there, it insists on creating a new folder for my computer (My Computer 2) and doing a back-up of the entire thing.
    I looked at the Troubleshooting guide, and tried a few things: turned TM off, trashed the prefs, and reselected the drive, but to no avail.
    It still lists "Latest Backup -- " in the menu bar.
    How can I get it to see my old backups and then backup from the last one?

    hrishikesh wrote:
    instead of looking at the last back up, from a few weeks ago, and updating from there, it insists on creating a new folder for my computer (My Computer 2) and doing a back-up of the entire
    This is likely the cause of the problem. If you go several days (at least 10) without a backup, TM may do a new, full backup instead of an incremental one. Exactly how many days is not clear; some folks say it happened after two weeks, others say they've gone about a month without it happening. Some of us suspect it's a combination of being over about 10 days and the volume of changes, but none of us mere mortals really knows exactly.
    So, once you've followed one of V.K.'s suggestions and have TM working again, try not to go so long without a backup. Not only does that mean you can lose many days of additions and changes when your internal HD dies (yes, when not if), but TM may do this again.

  • Time machine doesn't recognize my old backups after clean install

    Time machine doesn't recognize my old backups after clean install of OSX Lion
    I also tried using migration assistant with no success.
    I just want to use TM to restore files and folders SELECTIVELY.
    Does anyone also know how to fully restore my iTunes data? (purchaces, music, iphone backups, etc)
    Thank you in advance

    Oh yeah, and the other thing is, now I CAN'T go back in time using my Time Machine back-up . . . It says I've never backed up now (I guess because this is a fresh install that's TECHNICALLY correct), but I restored from this Time Machine file . . . Surely I've done something wrong that can be fixed. Help, please?

  • Replaced internal hard drive, time machine doesn't recognize as same volume

    Howdy,
    The hard drive (call it drive "X") on my iMac (one of the 2005 models) was dying so I had it replaced. I rebuilt the new drive (drive "Y") from my most recent time machine backup (from external drive "A"). I am now having problems with one of my backup devices, in that time machine doesn't recognize that the new disk is conceptually the same thing that had been backed up before (same volume name).
    More details... I rotate my backups monthly through three external drives (I store the most recent offsite). After the disk replacement and restore process, I continued to use that backup drive (drive "A") without noticing any problem. Then it came time to rotate my external drives, and time machine doesn't find enough space on the next backup drive (drive "B"). Presumably this is because it doesn't realize that the drive I am backing up ("Y") is a copy of the drive that had previously been backed up on "B" ("X").
    Is there any way to convince it they are the same? Or am I in the same boat as this poster:
    http://discussions.apple.com/thread.jspa?threadID=2770362&tstart=0
    Basically I just want to verify that I am in that same boat before I remove old backup files on "B". If I do decide I need to remove those, are the instructions linked in thread 2770362 correct, or are there better ones?
    Thanks for any help,
    Bob H

    Actually, the backup I deleted above was the backup for the new internal drive. Apparently TM had created the (incomplete) backup during the failed attempt that ran out of space on the backup device. Since the new internal drive had the same name as the old internal drive, I didn't initially realize that's what I was deleting. Not that deleting it causes any harm, but it didn't address the original problem of freeing up space on the backup device.
    Not to worry though. I've figured out how to get at the backups for the old internal drive, and am in the process of deleting those. I was about to follow the instructions in your troubleshooting items E3 and E2, but upon attempting to enter time machine I stumbled into the right place. Since I had previously told TM to do no backups (because there was still not enough disk space), and since I'd left the backup device connected, when I pulled up the TM menu from the menu bar, the usual "Enter Time Machine" menu was replaced by "Browse Other Time Machine Disks" (or perhaps "Disks" was "Backups"). This then gave me a list of the machines that I'd backed up on this backup device (in my case machine names and internal drive names are the same). Of course one of those was for the old internal drive, and after choosing it I roughly followed the same course of action as I did a few days ago, to initiate deletion.
    I also saw how I could delete each of those old backups individually, but decided against that as I did not expect it would free up enough space. My expectation is that nearly all the space is shared among all the backups for the same source drive, since relatively very little changes between backups.
    Bob H

  • HT203177 Time machine doesn't recognize my hard drive archive

    I have time machine archive on a hard drive (not time capsule). It recently stopped backing up. On checking, time machine recognizes the hard drive (in preferences it is listed as the back up drive.) The files appear to be present on looking into the drive, but Time Machine doesn't recognize that there are backup files there, it wants to complete another full backup. Meaning - it says for latest backup: "none".
    I am afraid if I do another full backup, I will lose the ability to access the older backups.
    When I try to access older files through time machine, it predictably cannot find them.
    How do I tell Time Machine that the files on that hard drive are the backup files?

    Update:
    1) Right click on TM icon - Menu choice "Browse other TM disks" allows me to see the data - i.e. it is a valid TM archive, not corrupted.
    2) Looking at TM preferences immediately after showed the proper disk was targeted, but still Latest backup: None.
    3) Shut down, anomalous shut down -required power button hit. (AHH - the problem??)
    4) restart using command  - R  works - i.e recognizes the disk and emergency recovery system software
    5) Restart - Still shows latest backup: None
    6) trying to access data through standard TM startup shows data now.
    7) go back to preferences - still no backup shown.
    Aside - I can't recall what the purple vs white dates on right side of the screen signify, and can't find it in the documentation right now. Anybody know?

Maybe you are looking for

  • App Store not letting me download free games or even let me update apps I already have!

    Ok, so I tried purchasing a item in a game I have (not knowing how much I have in my bank account). App Store denied it so I'm like ok whatever I don't care. Well now whenever I try to download free apps or eve. Update apps I already have the store m

  • Sending Attachments

    Whenever I send an attachment - using Apple Mail System - the attachment gets embedded as part of the actual Email. This makes the Email very difficult to read as the picture usually shows up as a very very large image. How do I get Mail not to embed

  • Best Scenarios when to use IDOC Adapter, RFC Adapter and Proxy

    Please provide me links/weblogs which demonstrate the full scenario that when to use IDOC Adapter, RFC Adapter and Proxy when working with sender R/3 system. Regards Rachit

  • Best place for Windows 7?

    i know i missed the boat, but is Windows 7 still available anywhere? i want to grab the new desktop images for my mac. thanks.

  • Can't get Godaddy outgoing server to work in Mail - OK in Outlook

    No matter what I try, I just cannot get the Godaddy outgoing server to work in Mail, but it works OK in Outlook for Mac which I don't really want to use if I can avoid it. I've tried all my 3 accounts and none of them work with sending.  All Ok recei