Time Machine drive was attached to Mac, now to AEBS; wants to start over
I have a Time Machine disk that was connected to my Mac. I now want to connect it to my Airport Extreme Base Station (new N model). My Mac sees the drive as a Time Machine-enabled drive, but doesn't "get" that the drive already was a Time Machine backup for my computer, so it can't access any of the backups on it already (240+ GB). All Time Machine does is complain that there isn't enough room on the disk to do the backup.
How can I get Time Machine to realize that this computer of mine already has a Time Machine backup on the drive?
I don't think there is any way to do what you want. I assume you want to move the backup drive so that you can backup more than one computer to it.
My advice is to get a second backup drive if you have other computers to back up. In the meantime, you could just continue to back up your computer with the existing drive connected directly until it fills up.
Eventually, you could swap out the two drives on the AirPort Extreme Base Station, perhaps storing one of them offsite. But keep in mind that Apple doesn't officially support Time Machine backups to a shared drive connected to an AirPort Extreme Base Station.
You might be better off using separate and directly connected drives for each computer.
Similar Messages
-
My old Mac died. I had it backed up to a Time Machine external drive (fortunately). I have a new Mac. I want to get my entire iTunes library from the Time Machine drive to the new Mac. I want not only the music files but all the "library" metadata, playlists, song rankings, unique genre designations. How do I do this?
No backup is a huge mistake.
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store ... - Apple - Support -
Time Machine drive files after data recovery.....permissions problem?
Client had a hard drive crash, and then turned out her Time Machine drive was bad. We ran a data recovery on the Time Machine drive, which produced about 40GB of disk images...12 in all. There is a very promising image which shows the user folders, and we can click on hers and see her folders. BUT...when we try to open Documents, we get a message that
"Item "Documents" is in use by Mac OS X and cannot be opened"
Would there be an override of permissions or some such available to take a peek inside and hopefully pull files?
Thanks to all in advance.A general look at backup files......
-
Time Machine Drive won't mount, mounts on windows
Hi guys, I have a Seagate GoFlex Desk for Mac, it's a 2TB external Firewire 800 and USB 2.0 drive.
My machine is a 2011 iMac 27" i7 16GB RAM 2TB HD
I use the external drive for my Time Machine Backup, my mac had to be brought in to have the display replaced so i did a backup before i brought it to the service center.
After getting the mac back i noticed my time machine drive was not showing on the desktop so i tried doing a time machine backup but i got an error that there was not TM drive.
I ran Disk utility and it shows the drive with the Time machine partitioned grayed out and at the bottom "Mount Point : Not mounted", i tried mounting it from DU but nothing, i did a verify disk and right away i got a message that the disk needs to be repaired. I ran the repair but DU would get stuck trying to unmount the disk.
I tried restarting my computer, and i changed to other firewire cables i had using the firewire port and using the thunderbolt to firewire adaptor but no luck, also i tried USB.
Then i tried it on my windows partition with USB and it showed on windows, i was able to recover my data but i couldn't delete any from the drive, when i tried deleting anything i got a message that said "the files are too big" or something like that, I also tried formating the drive on windows but no luck with that.
I have no idea what's going on, the drive won't mount and it can't be ejected even though it's recognized (the time machine partition is grayed out)
Any suggestions? i really don't want to throw it away and if do i would at least like to wipe it out.
Thank you in advance for any suggestionsOther than the Disk Repair from the Disk Utility, I would suggest resetting the PRAM: http://support.apple.com/kb/PH11243.
Tha's kind of a last ditch effort though. Can you put it in another mac computer with the mac os? Does it show up there? -
Online Backup for Time Machine Drive?
I've been looking around at the major names in online backup and most of them won't let you back up external drives, but I found BackBlaze and it looked good till I found out that it specifically won't allow you to backup a Time Machine drive to its service.
Does anyone know of a good online backup service that will let you back up your time machine drive?i second Thomas' remarks.
you may want to consider Dropbox for that redundant backup.
JGG -
I have bought a Seagate Backup Plus 1TB drive, first time during plug-in, I have selected Mac Windows option which excludes Time Machine to work on it, but now I want to go back and select Only Mac option to activate my Time Machine application.
I request you to help me with the procedure of the same?IMPORTANT - This will reformat your Seagate drive and hence wipe it. If there is anything on your Seagate drive you want to keep, save it somewhere else FIRST.
Plug the drive in.
In Finder select Applications > Utilities > Disc Utilities.
Select the external drive, select Partition option, give it a name (I call mine Mac Backup), select Mac OS Extended (Journaled) as the Format and under the drop down menu "Partition Layout" select the number of partitions you want (so if you want the drive to just be for Time Machine, select 1 Partition, if you want part of the drive to be for Time Machine and the rest for something else, select 2 partitions and so on). Click apply and the Disc Utility will partition and reformat your drive ready to use.
When this is complete, open Time Machine in System Preferences. Use Select Disc to select the drive (or if you have multiple partitions, the partition of the drive) you want and you are good to go.
This may be a long way round, but it gives you the option to partition your disc which you may want. -
EMERGENCY!!!!!!!!
IS THERE ANY WAY TO RETREIVE AN ACCIDENTALLY DELETED BACK UP FROM MY TIME MACHINE DRIVE????
In other words, I emptied out a folder on my main MAC to make space and the next subsequent backup backed up the EMPTY FOLDER and then deleted the "old backup" that actually contained the contents of the very important folder.
Now only the emptied folder exists on my MAC and in the two backups on my Time machine backup drive.
This was clearly a big mistake on my part not realizing that the "old backup" being deleted by Time Machine would include backed up files that I had no intention of getting rid of....
What can I do now?
Is DATA RETREIVAL even an option?
I am sure that the Folder of files that I need are on the most recently deleted "OLD BACKUP" but how do I get to this, if even possible?????
Super desperate situation here...
Minna-help-me wrote:
Is DATA RETREIVAL even an option?
It may be possible to recover some of the data, if it hasn't been overwritten, but it won't be cheap or easy.
You've posted in the Time Capsule forum, but you mention a "backup drive." If your backups are on a Time Capsule's internal HD, instead of an external HD, it's even worse.
See Data Recovery.
Good luck. -
How do I make a hard drive "forget" that it was once a (no longer used) Time Machine drive?
I'm starting a new thread on this question in the hope that someone new will notice it.
I've started using a larger hard drive for my TM backups. I want to be able to use the previous drive for other things BUT I also want to keep the oldest TM backup, just in case. In order to do that I want to move all but one day's backup to the trash but of course get the "The operation can’t be completed because backup items can’t be modified." message. I also, of course, can't change the name of the backups.backupdb folder for the same reason. In older OSs it was possible to use a Terminal command to bypass all this but it would seem that it's no longer possible to do this in Mt. Lion.
Note that the old drive is NOT being used in Time Machine, so that's not the problem.
Does anyone know how to make Time Machine realize that the drive is now just a drive, not a Time Machine drive? Obviously I know I can just reformat it but then I'll lose ALL the files. I want to keep one day's worth, so reformatting is not the solution. I do know that I can copy everything over to another drive but I don't have another drive large enough to do that, so need to unflag the one set of files as TM backups and trash the others.
Any help gratefully accepted.I think I understand your question, but I'm puzzled at what you are trying to accomplish.
Let's say you've been using TM for a year, now you start a new backup set on a different device.
What you seem to want to do is delete all the backups in the old backup set on the old except for the very first backup - ie. the oldest.
That would mean that you would retain the oldest backup from 1 year ago, and all the new backups from the start of the new set forward. Deleting all the past year's backups except for the very first plus the new backups going forward on the new device. Is that what you want?
The only way I know of doing this would be to manually delete in TM all the undesired backups -slow and tedious for sure,
On the other hand, you want to keep the last backup of on the old device then....
Assuming that you started the new back up set shortly after the last backup on the old device, then the first backup on the new and the last on the old are almost identical for all practical purposes.
If that's what you want I'm not sure it accomplishes anything useful.
Can you clarify what you want to achieve/do, so we can help you better. -
Time Machine Linked to New Upgraded Mac Hard Drive
I recently upgraded my Mac hard drive. Unfortunately, Time Machine linked to the new hard drive. My computer hard drive icon now shows up as a Time Machine back-up drive.
I went into Time Machine preferences and changed the back-up drive to my regular external back-up hard drive. When I go into Time Machine Preferences - Select Disk my external back-up hard drive is the only drive listed.
However, my Mac hard drive icon still shows up with the blue Time Machine back-up icon. Any ideas how to unlink my Mac hard drive from Time Machine so that it shows up in the Finder window with the typical gray hard drive icon instead of the blue Time Machine icon?felicityrose wrote:
the replacement computer I wanted (and have not gotten) is a new unibody macbook, which does not have Firewire
Does your drive also have a USB connection? Many F/W drives do. If so, you can do it directly. While USB is slower than FireWire, it's a whole lot faster than wireless.
Can I just drag the whole back-up file from my hard drive onto the friend's computer and then connect via wireless?
No, that won't work.
Depending on what kind of Mac your friend has, you might be able to copy the whole drive to a USB drive via Disk Utility, then migrate from there to your new computer.
Or is this an impossible dream and I am better off taking it in to the experts?
Yes. Absolutely. Entirely. It will be well worth the wait. -
I have two external hard drives. One is my Time Machine backup drive. The other I use for external storage of files (documents, photos, movies, etc). Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?
Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/ -
i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX
Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now? -
WD World Edition 1TB as a Time Machine drive with Mac and XP?
I plan on buying a WD World Edition 1TB to use as my Time Machine drive over wireless netowrk at home for my 320GB MBP.
My wife has a Windows XP PC so I would like to partition the 1TB into maybe 600MB for me and 400MB for her.
First of all, will this type of partition work with TM and also, what format should the WD Drive be? I have installed MacFuse and NTFS-3G on my MBP.
Any info from someone who does something simalr would be greatly appreciated.
DaveThat sounds fine.
So in theory, the WD comes with no partitions so I could set the whole thing up on the XP machine and set the partition sizes, then go the Mac, connect to the partition I've set aside for myself and select it, at which point the Mac will format it to HFS and start backing up?
You say the Mac is oblivious to partitions so what would stop it formatting the entire drive to HFS?
Ideally I'd like to get the WD software to backup the XP machine to the XP partition and TM to backup the Mac to the HFS partition. Do you know if this is likely to work? Hopefuilly someone with this drive will be able to answer as well.
Thanks for your help so far -
I have been using time machine to back up my Mac Book Pro 3.1 to my Time Capsule. Now the Time machine hangs up on "calculating time remaining".
Mac Book Pro - 3.1-15-inch 2.4/2.2GHz), Processor 2.2 GHz Intel Core 2 Duo
Operating system : OS X 10.10.1
Time Machine Version 1.3, Copyright 2007-2014 Apple Inc., Modified Tuesday, September 9, 2014 at 6:03 PM
Time Capsule: 500 GB C 2007
This Time Machine software worked satisfactory until Monday Nov, 10 2014 and I have backups until that time. For several years, the software deleted the oldest back up to save the latest one. This is acceptable to me as I have off site storage that is updated every 3 months. How do I get Time machine working again?I have spent a couple of days trying to respond to Linc Davis. Finally I figured it out . The following is a copy of data from my console from the initiation of a time machine backup until it gets stuck trying to calculate the time remaining. There is no indication that anything starts saving. I copied about 3 minutes of data. This is probably way too much data, but I do not know what is relevant.
Thanks for the help,
calcool
12/22/14 3:16:54.655 PM com.apple.backupd[551]: Starting manual backup
12/22/14 3:16:55.057 PM com.apple.backupd[551]: Attempting to mount network destination URL: afp://”name”%20”lastname”@Home%20Network%20Time%20Capsule._afpovertcp._tcp.loca l./Time%20Capsule
12/22/14 3:16:57.262 PM mds[33]: (Volume.Normal:2464) volume:0x7fed5ab54000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Time Capsule
12/22/14 3:16:57.565 PM com.apple.backupd[551]: Mounted network destination at mount point: /Volumes/Time Capsule using URL: afp://”name”%20”lastname”@Home%20Network%20Time%20Capsule._afpovertcp._tcp.loca l./Time%20Capsule
12/22/14 3:17:08.000 PM kernel[0]: hfs: mounted Backup of “name” “lastname”’s MacBook Pro on device disk3s2
12/22/14 3:17:09.625 PM com.apple.backupd[551]: Disk image /Volumes/Time Capsule/”name” “lastname”’s MacBook Pro (2).sparsebundle mounted at: /Volumes/Backup of “name” “lastname”’s MacBook Pro
12/22/14 3:17:11.112 PM com.apple.backupd[551]: Backing up to /dev/disk3s2: /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb
12/22/14 3:17:24.931 PM “name”[593]: audit warning: soft /var/audit
12/22/14 3:17:24.944 PM “name”[594]: audit warning: allsoft
12/22/14 3:17:24.958 PM “name”[596]: audit warning: closefile /var/audit/20141222201654.20141222201724
12/22/14 3:17:26.544 PM com.apple.backupd[551]: Event store UUIDs don't match for volume: Macintosh HD
12/22/14 3:17:34.767 PM com.apple.backupd[551]: Deep event scan at path:/ reason:must scan subdirs|new event db|
12/22/14 3:17:34.768 PM com.apple.backupd[551]: Reading cached event database from: /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb/”name” “lastname”’s MacBook Pro (2)/2014-12-22-151726.inProgress/F85FEA51-E137-471A-84DA-A2C00E4ECB42/.1BEF88C6 -20C3-3DDC-AE30-05EAB2AFCC15.eventdb
12/22/14 3:17:38.115 PM com.apple.backupd[551]: Using cached disk scan
12/22/14 3:17:39.114 PM com.apple.backupd[551]: Saved event cache at /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb/”name” “lastname”’s MacBook Pro (2)/2014-12-22-151726.inProgress/5BC46A53-25E8-4C4A-8947-AFB221D1FA0C/.1BEF88C6 -20C3-3DDC-AE30-05EAB2AFCC15.eventdb
12/22/14 3:17:39.355 PM com.apple.backupd[551]: Not using file event preflight for Macintosh HD
12/22/14 3:19:14.782 PM CoreServicesUIAgent[294]: unexpected message <OS_xpc_error: <error: 0x7fff77befc60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff77beff70> { length = 18, contents = "Connection invalid" }
}>
12/22/14 3:20:15.207 PM locationd[182]: Location icon should now be in state 'Active'
12/22/14 3:20:17.267 PM locationd[182]: Location icon should now be in state 'Inactive'
12/22/14 3:20:17.884 PM locationd[182]: Location icon should now be in state 'Active'
12/22/14 3:20:18.483 PM sandboxd[296]: ([310]) com.apple.metada(310) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
12/22/14 3:20:21.646 PM com.apple.metadata.SpotlightNetHelper[310]: [SLSUGGESTIONS] Location managed failed with error Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
12/22/14 3:20:23.892 PM WindowServer[143]: disable_update_timeout: UI updates were forcibly disabled by application "Spotlight" for over 1.00 seconds. Server has re-enabled them.
12/22/14 3:20:26.526 PM WindowServer[143]: common_reenable_update: UI updates were finally reenabled by application "Spotlight" after 3.63 seconds (server forcibly re-enabled them after 1.00 seconds)
12/22/14 3:20:28.298 PM sandboxd[296]: ([310]) com.apple.metada(310) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
12/22/14 3:20:29.094 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[599]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
12/22/14 3:20:30.670 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:30.670 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:32.294 PM com.apple.InputMethodKit.UserDictionary[600]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](808): CoreData: Ubiquity: “name”~00000000-0000-1000-8000-001B63947FCF:UserDictionary
Using local storage: 1
12/22/14 3:20:32.317 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:32.769 PM locationd[182]: Location icon should now be in state 'Inactive'
12/22/14 3:20:34.580 PM Console[601]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
12/22/14 3:20:35.540 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/22/14 3:20:36.388 PM com.apple.xpc.launchd[1]: (com.apple.auditd[604]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
12/22/14 3:20:36.693 PM “name”[608]: audit warning: soft /var/audit
12/22/14 3:20:36.718 PM “name”[607]: audit warning: allsoft
12/22/14 3:20:37.045 PM “name”[610]: audit warning: closefile /var/audit/20141222201724.20141222202036
12/22/14 3:20:37.438 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:42.437 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.437 PM QuickLookSatellite[611]: Invalid Connection ID 0
12/22/14 3:20:42.477 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.477 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.612 PM QuickLookSatellite[611]: [QL] No sandbox token for request <QLThumbnailRequest stackshot.log>, it will probably fail
12/22/14 3:20:42.613 PM QuickLookSatellite[611]: [QL] No sandbox token for thumbnail request file:///Library/Logs/stackshot.log, it will probably fail
12/22/14 3:20:42.615 PM QuickLookSatellite[611]: [QL] No sandbox token for request <QLThumbnailRequest stackshot-syms.log>, it will probably fail
12/22/14 3:20:42.615 PM QuickLookSatellite[611]: [QL] No sandbox token for thumbnail request file:///Library/Logs/stackshot-syms.log, it will probably fail -
I have a mid2009 MacBook Pro running Mavericks for which I have been using a USB WD HD for Time Machine. I'd like to get a wireless HD and start a new Time Machine backup for this Mac and retire the 5 year old WD drive. Can I start over?
no archive/ backup is perfect, HD clones can be set to make incremental additions, same as time machine however, though they are more time involved in doing so.
See the + and - of all data backup/ archives below and "spread it around".... or the "dont put your eggs all in one basket" philosophy.
Peace
Data Storage Platforms; their Drawbacks & Advantages
#1. Time Machine / Time Capsule
Drawbacks:
1. Time Machine is not bootable, if your internal drive fails, you cannot access files or boot from TM directly from the dead computer.
2. Time machine is controlled by complex software, and while you can delve into the TM backup database for specific file(s) extraction, this is not ideal or desirable.
3. Time machine can and does have the potential for many error codes in which data corruption can occur and your important backup files may not be saved correctly, at all, or even damaged. This extra link of failure in placing software between your data and its recovery is a point of risk and failure. A HD clone is not subject to these errors.
4. Time machine mirrors your internal HD, in which cases of data corruption, this corruption can immediately spread to the backup as the two are linked. TM is perpetually connected (or often) to your computer, and corruption spread to corruption, without isolation, which TM lacks (usually), migrating errors or corruption is either automatic or extremely easy to unwittingly do.
5. Time Machine does not keep endless copies of changed or deleted data, and you are often not notified when it deletes them; likewise you may accidently delete files off your computer and this accident is mirrored on TM.
6. Restoring from TM is quite time intensive.
7. TM is a backup and not a data archive, and therefore by definition a low-level security of vital/important data.
8. TM working premise is a “black box” backup of OS, APPS, settings, and vital data that nearly 100% of users never verify until an emergency hits or their computers internal SSD or HD that is corrupt or dead and this is an extremely bad working premise on vital data.
9. Given that data created and stored is growing exponentially, the fact that TM operates as a “store-it-all” backup nexus makes TM inherently incapable to easily backup massive amounts of data, nor is doing so a good idea.
10. TM working premise is a backup of a users system and active working data, and NOT massive amounts of static data, yet most users never take this into consideration, making TM a high-risk locus of data “bloat”.
11. In the case of Time Capsule, wifi data storage is a less than ideal premise given possible wireless data corruption.
12. TM like all HD-based data is subject to ferromagnetic and mechanical failure.
13. *Level-1 security of your vital data.
Advantages:
1. TM is very easy to use either in automatic mode or in 1-click backups.
2. TM is a perfect novice level simplex backup single-layer security save against internal HD failure or corruption.
3. TM can easily provide a seamless no-gap policy of active data that is often not easily capable in HD clones or HD archives (only if the user is lazy is making data saves).
#2. HD archives
Drawbacks:
1. Like all HD-based data is subject to ferromagnetic and mechanical failure.
2. Unless the user ritually copies working active data to HD external archives, then there is a time-gap of potential missing data; as such users must be proactive in archiving data that is being worked on or recently saved or created.
Advantages:
1. Fills the gap left in a week or 2-week-old HD clone, as an example.
2. Simplex no-software data storage that is isolated and autonomous from the computer (in most cases).
3. HD archives are the best idealized storage source for storing huge and multi-terabytes of data.
4. Best-idealized 1st platform redundancy for data protection.
5. *Perfect primary tier and level-2 security of your vital data.
#3. HD clones (see below for full advantages / drawbacks)
Drawbacks:
1. HD clones can be incrementally updated to hourly or daily, however this is time consuming and HD clones are, often, a week or more old, in which case data between today and the most fresh HD clone can and would be lost (however this gap is filled by use of HD archives listed above or by a TM backup).
2. Like all HD-based data is subject to ferromagnetic and mechanical failure.
Advantages:
1. HD clones are the best, quickest way to get back to 100% full operation in mere seconds.
2. Once a HD clone is created, the creation software (Carbon Copy Cloner or SuperDuper) is no longer needed whatsoever, and unlike TM, which requires complex software for its operational transference of data, a HD clone is its own bootable entity.
3. HD clones are unconnected and isolated from recent corruption.
4. HD clones allow a “portable copy” of your computer that you can likewise connect to another same Mac and have all your APPS and data at hand, which is extremely useful.
5. Rather than, as many users do, thinking of a HD clone as a “complimentary backup” to the use of TM, a HD clone is superior to TM both in ease of returning to 100% quickly, and its autonomous nature; while each has its place, TM can and does fill the gap in, say, a 2 week old clone. As an analogy, the HD clone itself is the brick wall of protection, whereas TM can be thought of as the mortar, which will fill any cracks in data on a week, 2-week, or 1-month old HD clone.
6. Best-idealized 2nd platform redundancy for data protection, and 1st level for system restore of your computers internal HD. (Time machine being 2nd level for system restore of the computer’s internal HD).
7. *Level-2 security of your vital data.
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
#4. Online archives
Drawbacks:
1. Subject to server failure or due to non-payment of your hosting account, it can be suspended.
2. Subject, due to lack of security on your part, to being attacked and hacked/erased.
Advantages:
1. In case of house fire, etc. your data is safe.
2. In travels, and propagating files to friends and likewise, a mere link by email is all that is needed and no large media needs to be sent across the net.
3. Online archives are the perfect and best-idealized 3rd platform redundancy for data protection.
4. Supremely useful in data isolation from backups and local archives in being online and offsite for long-distance security in isolation.
5. *Level-1.5 security of your vital data.
#5. DVD professional archival media
Drawbacks:
1. DVD single-layer disks are limited to 4.7Gigabytes of data.
2. DVD media are, given rough handling, prone to scratches and light-degradation if not stored correctly.
Advantages:
1. Archival DVD professional blank media is rated for in excess of 100+ years.
2. DVD is not subject to mechanical breakdown.
3. DVD archival media is not subject to ferromagnetic degradation.
4. DVD archival media correctly sleeved and stored is currently a supreme storage method of archiving vital data.
5. DVD media is once written and therefore free of data corruption if the write is correct.
6. DVD media is the perfect ideal for “freezing” and isolating old copies of data for reference in case newer generations of data become corrupted and an older copy is needed to revert to.
7. Best-idealized 4th platform redundancy for data protection.
8. *Level-3 (highest) security of your vital data.
[*Level-4 data security under development as once-written metallic plates and synthetic sapphire and likewise ultra-long-term data storage]
#6. Cloud based storage
Drawbacks:
1. Cloud storage can only be quasi-possessed.
2. No genuine true security and privacy of data.
3. Should never be considered for vital data storage or especially long-term.
4. *Level-0 security of your vital data.
Advantages:
1. Quick, easy and cheap storage location for simplex files for transfer to keep on hand and yet off the computer.
2. Easy source for small-file data sharing. -
I am tring to installe OS X Mavericks. When I get to the select disk page it says that the HD is uesd as time machine drive. How can I remove time machine backup from my Mac.
Open up your Finder and click on Go on the top menu bar. Select Computer and then double click Macintosh HD. In here delete the backup folder. Might be called backups.backupdb.
Maybe you are looking for
-
Business address points to wrong location on map
When entered into the Apple maps app, the address of my business sends my customers 15 miles away into the boonies. I have done the report a problem and moved the pin in the app NUMEROUS times over the last 6 months. Is there any way to contact someo
-
Control access of a form from another form.
hi all, Please help me . This is a system which contains a lot of forms (more than 100) . The system administrator can specify whether a user can insert, update,delete or query for each form (this varies for each user). So, when a user logs in and ca
-
I am unable to get a connection with my ipad with my wifi router. Will I need to upgrade my router
-
J4680 was connected to wireless but had to change out routers. now it will not connect. win 7.
My J4680 worked great on my old wireless. I changed out routers and now I can't get it reconnected. I have Windows 7 so the install disk never worked for me. Is there somewhere I can get the Windows 7 install exe so I can configure the wireless th
-
Hi, I have an JSF Portal application one of the Portlets displays some fields and link . The link opens a poup window where I can do some searchers and move the results to the parent window that all works OK the problem that I'm having is if the user