Time machine error - the back up disk is not available. Time machine no longer backs up.

My time machine quit backing up 2 weeks ago. How can I fix it?

Did you try the simple stuff?? Reboot the TC.. next.. reboot the whole network restarting in correct order?? ie modem.. TC.. client computers.. with 2min gap.
No luck we need to know more..
What modem.. is it a router?
What TC.. what firmware.. how is it connected?
What OS on the computer?

Similar Messages

When trying to back up to a WD My Passport I get a message that says the back up disk is not available. Any ideas?

When trying to back up to a WD My Passport I get a message that says the back up disk is not available. Any ideas?

Find and run the Disk Utility program. In the list on the left side of the program window you should see two hard drives - the internal Mac drive and one labeled with Western Digital's name. (Not exactly sure how the WD drives appear.) Under each of those drives there will be another indented drive name. See picture below.
If you don't see two drives there's your problem - for some reason the Mac doesn't recognize that there's an external drive plugged in. Check cables, etc.
More than likely though you will see the two drives. See how in the picture I've selected the indented drive icon? Do the same for your WD drive. Now look at the bottom where it says Format. To use TimeMachine your format needs to be Mac OS Extended (journaled) and I'm betting it doesn't. After you've done that TM will be able to use the drive.

Error-The RFC destination EDSCLNT900 is not available in ICWC

Hi All,
I'm working on CRM Utilities 2007. In the ICWC, I'm getting the error 'The RFC destination EDSCLNT900 is not available'. Kindly help me in resolving this error.
Regards,
Archana.
Edited by: archu_sap on Jul 15, 2009 10:30 AM
Edited by: archu_sap on Jul 15, 2009 10:33 AM

Hi,
You have to maintaine RFC Destination EDSCLNT900 in the CRM system.
generally we have to maintain RFC (t-code SM59) in the sytem where Function Module is present.
Suppose you are having FM in ECC system and you want to call in CRMsystem, then you have to maintain RFC destination (EDSCLNT900) in ECC system.
Thanks & Regards.
ShreeMohan

Error:The Implementation options are either not available or invalid

Hi,
While opening projects in Project Module it give an error as below:
The Implementation options are either not available or invalid
Please guide me how to resolve it.
Thanks
Regard's
Haresh

Hi
Implementation Options are part of the set up required for implementing Oracle Projects.
You must complete this setup before continuing with PJM processes.
Dina

Lost preferences and when requesting a batch operation the error "The command "Batches" is currently not available."

For CS6 when I started to work again I had lost screen preferences and when tried to run a batch operation I got the message "The command "Batches" is currently not available." Where are these files stored and how can I restore them?

Found IT !!! For Windows - go to users appdata folder and windows has a file restore function. restored Actions Palette.psp and Adobe Photoshop X64 CS6 Prefs.psp files to previous versions. Works great.
Alvin55

Time Machine; The back up disk is not available

Hello,
I have a time machine that has failed to sync since April. I am problem solving now. I deleted the backup disk in order to begin fresh and followed some threads on how to do so. I restarted the back up, now it is telling me the disk is unavialable. Any ideas?

Best to erase the Time Capsule drive correctly and then start over. (This will wipe the drive clean, so be sure to move any other data that you might have on the Time Capsule drive to another location)
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the next box
Click the Disks icon at the top of the next window
Click Erase
Choose the Quick Erase option....will only take a minute or two
Click Erase Disk
Then, set the path again for backups as above in the previous post and give it a go

"Time machine error, The disk image cannot be mounted" What can I do??

I ran the time machine. Then, "preparing backup" showed up for a long time. After that, a window pop out: "Time machine error, The disk image cannot be mounted" What is disk image? What can I do (I can't back up anything)
P.S. I use time capsule for backup. there were no problem on connection

I'm having the same issue. I do not have TC as my base station. It says right in the book that if you choose, you do not have to have it run as your router, just as a part of your existing wireless network. All software is up to date and I have already shortened the name of both my TC and TC disc to 6 characters and no spaces! I've already spoken with someone today about this. He really didn't know. Have tried backing up both wirelessly and directly connecting with an Ethernet cord. I had to finally call because when I attempted to register the product to get online support, apple.com didn't recognize the serial number!!! The gentleman on the phone got it registered for me. I bought the TC from an official apple store and for whatever reason when he put in the serial number his computer said that this TC was so "old" I guess that there was technically "no support." That basically means that even though my parents just purchased this for me a week before Christmas, that it was made a year ago and the warranty is not good?? I need to do more research on that. Right now I am very unhappy about this. I am a firm apple user and have been for years, but this is frustrating.
I had read somewhere else (not sure I've been searching apple for what seems like forever now) to make sure that the TC was showing up in "devices" of the Finder. Mine doesn't show up there, but rather in the "Network" window. Is this an issue? If it is, can anyone tell me how to fix that. I have Time Machine backing up to my TC, so I do not see why it would be.
UPDATE: I just opened up my TC on the "Shared" section of the Finder window and deleted the old "sparsebundle" (I had no clue that anything had backed up way back at 3:30pm on Dec 29) and now I get a slightly new message: Time Machine Error: The backup disc image could not be created." So now the word "mounted" is replaced with "created." This error showed up a lot sooner than the original one. Ok, no clue. I am going to try to Change the Disc again, and try again. I will post another update.
Message was edited by: kryzma

The requested resource (/test/) is not available. Tomcat. Myfaces.

Hi, i use Myfaces and Tomcat. Sometimes there is error : The requested resource (/test/) is not available. This is regarding war file. How can i check where there is the error? Sometimes the files are allmost same, i think. But in one time it works, in other no. I use Eclipse to edit and create files. Is it possible to check the errors before creating of war file? Thanks in advance!!!!!!!!!!

Hi, i use Myfaces and Tomcat. Sometimes there is error : The requested resource (/test/) is not available. This is regarding war file. How can i check where there is the error? Sometimes the files are allmost same, i think. But in one time it works, in other no. I use Eclipse to edit and create files. Is it possible to check the errors before creating of war file? Thanks in advance!!!!!!!!!!

The Binding of Isaac is not available on your current platform.

Hello,
I'm trying to play to the The Binding of Isaac, a game on steam.
When I press on the "PLAY NOW" button I get the error "The Binding of Isaac is not available on your current platform.", although it is available on Linux (and my friends can play it on Ubuntu).
I'm running Arch 64, multilib repository is of course enabled, and everything is updated.
Anybody has any clue?

Then you should just ask your friends, because there is no Binding of Isaac for Steam for Linux, because the developer doesn't have the source code anymore and can't provide the game for Steam for Linux.
So your friends are either magicians, that can play games on a platform, that the developer itself is not able to provide support for, or they don't play it on Steam for Linux.

The current inspection stage is not available - (Sample Calculate)

Hello Gurus,
When we try to calculate Sample in QA02. We are getting this error
The current inspection stage is not available
Message no. QD704
How can i reset the inspection stage or any other solution to this?
thanks!
Khan

First of all take UD of all previuos lots.
Then go to QDL2 -->either reset the Quality level or change it to another level.
then check

The requested resource (/ciscopca) is not available

I am trying to acces the mailbox via web url and getting the error
The requested resource (/ciscopca) is not available
using cisco unity connection
System version: 8.0.3.23031-1

David,
I had it at 1024 and I bumped it up to 2048 and now it works.
Thank you very much!
Jim

The requested resource /MobileOTA14/ is not available

Hi,
I am trying to deploy the mobile 4.0 client package MobileOTA14.war file on tomcat6/Windows. I have used the following command to deploy the file. The command executes successfully. The I have restarted the web server.
wdeploy.bat tomcat6 -Dwar_dir="C:\Program Files (x86)\SAP BusinessObjects\Mobile 14\Client" -DAPP=MobileOTA14 deploy
But when I execute the url " http://hostname:8080/MobileOTA14, I get an error "The requested resource /MobileOTA14/ is not available"
I see the /MobileOTA14/ is deployed on the tomcat through Tomcat Manager webpage.
Can anybody advise what was the problem?
Thanks,
Kris

I couldn't get you
I think we need to download Mobile application (Symbian/Blackberry/Windows) using the link " http://hostname:8080/MobileOTA14" on the Mobile.
But I am getting "The requested resource /MobileOTA14/ is not available" when I executed in the browser
Thanks,
Kris

HT3275 Time Machine Error: The backup disk image "Volumes/Data/My Macbook Pro.sparsebundle" is already in use. (How do I correct this issue?)

Time Machine did not back up:
Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
How do I correct this issue?
Thanks!

You need to be careful Bob.. people might take this literally.
Bob Timmons wrote:
How do I correct this issue?
Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
https://discussions.apple.com/thread/5222487?tstart=0

HT3275 TIME MACHINE ERROR: The backup disk image "/Volumes/Data/Sean McGuire's MacBook Pro.sparsebundle" could not be created (error 1).

I can select a disk (Time Capsule) and initiate the backup. It only "waits to back up" then "making backup disk available" and remains frozen there. I tried to update the software a while back and was unsuccessful, I think that may be the issue.
Any insight would be greatly appreciated. This is the error message I receive.
TIME MACHINE ERROR: The backup disk image “/Volumes/Data/Sean McGuire’s MacBook Pro.sparsebundle” could not be created (error 1).
Thanks

See #C17 in Pondini's excellent support document Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html

HT3275 Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. Could not complete backup to media share. The network backup disk does not support the required AFP feat

Since updating OS to Mountain Lion from leopard, I get the following error message when trying to backup with time machine on external drive. "Could not complete backup to media share. The network backup disk does not support the required AFP features." What are AFP features and how do I get Time Machine to backup to my current external backup?

This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

Time machine error - the back up disk is not available. Time machine no longer backs up.

Similar Messages

Maybe you are looking for