Time machine errors: I get em

Here are my problems
1) I have had to scrap my backup file 3 times due to TM file corruption problems
2) regularly (once + a day) TM will spin and spin when I go to the TM preferences to observe what is going on I see the backup bar empty of activity with the words backing up ( not preparing) when I stop the program and rebackup I then get preparing it then goes to backing up and then lists at the bottom of the bar the X mb of yMB for that cycle. I just did this at 8 today and had to restart the back up at 10!!
I am up to date with 10.5.5 I have a time capsule (1TB) totally dedicated to just being a backup.
What gives Retrospect was a PITA but when it was set up it WORKED!!
Thanks for any insights

spyder2004 wrote:
Here are my problems
1) I have had to scrap my backup file 3 times due to TM file corruption problems
2) regularly (once + a day) TM will spin and spin when I go to the TM preferences to observe what is going on I see the backup bar empty of activity with the words backing up ( not preparing) when I stop the program and rebackup I then get preparing it then goes to backing up and then lists at the bottom of the bar the X mb of yMB for that cycle. I just did this at 8 today and had to restart the back up at 10!!
I am up to date with 10.5.5 I have a time capsule (1TB) totally dedicated to just being a backup.
What gives Retrospect was a PITA but when it was set up it WORKED!!
Thanks for any insights
This might not be a TM problem but a TC problem.
You might check into the TC forum here:
http://discussions.apple.com/forum.jspa?forumID=1253&start=0
Message was edited by: nerowolfe

Similar Messages

  • I'm having trouble backing up my second macbook to a new time capsule.   continue to get an error message -- "Time  Machine Error.  The backup disk image could not be created."   Is there something I need to change in my time capsule or time machine?

    I just set up a new time capsule.  it worked fine on my first macbook.  But now I cannot backup my second macbook.   Getting "Time Machine Error"  "The backup disk image could not be created."  Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?

    Try #C9 in Pondini's Time Machine Troublshooting
    http://pondini.org/TM/Troubleshooting.html

  • I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice.

    I am using a WD My Passport Studio external hard drive as a Time Machine. I get the error that a back up folder could not be created when my iMac has been asleep, any advice. The hard drive is set set not to go to sleep.

    Were you not plugged in via USB to begin with?
    I would recommend performing some resets just to be on the safe side. Unplug the external HD, and try these steps:
    http://support.apple.com/kb/HT3964
    http://support.apple.com/kb/HT1379

  • I am running 10.7.5 and getting Time Machine error The backup disk image "/Volumes/Data/Kathy P's MacBook.sparsebundle" is already in use. what do i do now?

    i am running 10.7.5 on an older MacBook and getting Time Machine error The backup disk image “/Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use. what do i do now?

    See Pondini's TM FAQs, for starters.

  • Can someone tell me where this error is generated. I have no backup set of any kind thru time machine. I get this error message in console every Friday.EBEngine[4611:b07] ditto: /System/V2: Permission denied

    Can someone tell me where this error is generated. I have no backup set of any kind thru time machine. I get this error message in console every Friday.   EBEngine[4611:b07] ditto: /System/V2: Permission denied

    Can someone tell me where this error is generated. I have no backup set of any kind thru time machine. I get this error message in console every Friday.   EBEngine[4611:b07] ditto: /System/V2: Permission denied

  • Im using a network drive with time machine and im getting error 45. Time machine will not work now. Why?

    I bought a seagate goflex home 2TB network drive. It worked with time machine for a couple of weeks than now it wont. It just says ERROR 45 now and will not back up. Why?

    Welcome to Apple Support Communities.
    According to several related Time Machine Error 45 threads in these forums, Time Machine is not well suited to backups on most non-Apple network drives.
    https://discussions.apple.com/message/10744727#10744727
    https://discussions.apple.com/message/15643759#15643759
    https://discussions.apple.com/message/11929252#11929252
    https://discussions.apple.com/message/13164522#13164522
    One of the discussions provides an off-site link to these suggestions:
    http://web.me.com/pondini/Time_Machine/Troubleshooting.html

  • HT3275 Time Machine Error: The backup disk image "Volumes/Data/My Macbook Pro.sparsebundle" is already in use. (How do I correct this issue?)

    Time Machine did not back up:
    Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
    How do I correct this issue?
    Thanks!

    You need to be careful Bob.. people might take this literally.
    Bob Timmons wrote:
    How do I correct this issue?
    Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
    https://discussions.apple.com/thread/5222487?tstart=0

  • Time Machine Error Message:  Errors while copying to this drive

    PLEASE someone help me! I've used Time Machine since it's inception, and suddenly I'm getting these error messages that are not helpful. I'm not a computer expert, I don't know much about file extensions (re: discussions about removing certain files), and really am lost about what to do. I've rebooted, I've purchased TWO new external drives (sitting here with nothing on them) -- I haven't backed up in a month -- and I'm very concerned about this. Do I need to use an online backup system? I really would like help with this. Again -- I'm attempting to backup using Time Machine and keep getting the error message: Unable to complete backup. Errors while copying files to the drive. I've been on the phone with Apple Support -- and I get started on a new backup (it will actually begin to backup) and in a few minutes I get the error message. Are there certain files to delete? I'm certainly willing to do that -- but I need specific instructions about where to find them and how to delete them. Many thanks.

    I have been having the same problem. I haven't backed up since June 4 and I tried yesterday and I got the message about errors while copying the files to the drive. I tried it again and again, but no dice. I have been using Time Machine without incident since I bought my White Macbook (late 2007).

  • Time Machine Error Unable to complete backup. An error occurred while ...

    Hi,
    I've looked all around the forums for the answer to this one and I'm still unable to get it. So I'm getting this error "Time Machine Error Unable to complete backup. An error occurred while linking files on the backup volume". This started happening after I turned off and on FileVault. I was having a problem with it and turning it on an off got rid of that problem, but created this one. I've noticed that when I shut down the computer and filevault accesses the TM hard drive, it can back up.....but then when I'm logged on, or I want it to back up I get the error. I've tried fixing the drive, removing the in progress file and resetting the PRAM (i think that's what it was called). I'm starting to run out of options and have no other drive to back all this info on to reformat it.
    I really don't want to loose all my stuff.
    Please help!
    Daria

    nautical_stars wrote:
    Hi,
    I've looked all around the forums for the answer to this one and I'm still unable to get it. So I'm getting this error "Time Machine Error Unable to complete backup. An error occurred while linking files on the backup volume". This started happening after I turned off and on FileVault.
    Usually this message happens when you replace an external disk that was being backed-up by Time Machine with another one of the same name.
    Since File Vault works by making a sparse image of your home folder, and it's treated as a volume just as a HD is, that's probably what's happening here: the new sparse image has the same name as the old one, but isn't the old one.
    First, consider whether you really need File Vault. It doesn't work well with Time Machine: you can't see or restore individual items in your home folder, and it only gets backed-up when you log out.
    If you have a lot of other things, say photos, videos, and/or music that don't need to be encrypted, perhaps there's an easier way to secure our sensitive data. You can create an encrypted disk image via Disk Utility (in your Applications/Utilities folder), then copy the sensitive documents into it. Then the rest of your home folder is backed-up normally, and individual items can be viewed and restored in the usual fashion.
    But if you do continue using FileVault, you may have to use TM to delete all backups of it, via the instructions in item #12 of the Frequently Asked Questions *User Tip* at the top of this forum. That should then allow the new version of your encrypted home folder to be backed-up by TM.

  • "Time machine error, The disk image cannot be mounted" What can I do??

    I ran the time machine. Then, "preparing backup" showed up for a long time. After that, a window pop out: "Time machine error, The disk image cannot be mounted" What is disk image? What can I do (I can't back up anything)
    P.S. I use time capsule for backup. there were no problem on connection

    I'm having the same issue. I do not have TC as my base station. It says right in the book that if you choose, you do not have to have it run as your router, just as a part of your existing wireless network. All software is up to date and I have already shortened the name of both my TC and TC disc to 6 characters and no spaces! I've already spoken with someone today about this. He really didn't know. Have tried backing up both wirelessly and directly connecting with an Ethernet cord. I had to finally call because when I attempted to register the product to get online support, apple.com didn't recognize the serial number!!! The gentleman on the phone got it registered for me. I bought the TC from an official apple store and for whatever reason when he put in the serial number his computer said that this TC was so "old" I guess that there was technically "no support." That basically means that even though my parents just purchased this for me a week before Christmas, that it was made a year ago and the warranty is not good?? I need to do more research on that. Right now I am very unhappy about this. I am a firm apple user and have been for years, but this is frustrating.
    I had read somewhere else (not sure I've been searching apple for what seems like forever now) to make sure that the TC was showing up in "devices" of the Finder. Mine doesn't show up there, but rather in the "Network" window. Is this an issue? If it is, can anyone tell me how to fix that. I have Time Machine backing up to my TC, so I do not see why it would be.
    UPDATE: I just opened up my TC on the "Shared" section of the Finder window and deleted the old "sparsebundle" (I had no clue that anything had backed up way back at 3:30pm on Dec 29) and now I get a slightly new message: Time Machine Error: The backup disc image could not be created." So now the word "mounted" is replaced with "created." This error showed up a lot sooner than the original one. Ok, no clue. I am going to try to Change the Disc again, and try again. I will post another update.
    Message was edited by: kryzma

  • Time Machine Error: The backup was not performed because an error occurred

    G'day (from Queensland, Australia)
    Not for the first time Time Machine has broken down - originally in September 08 (I just can't recall how I fixed it!!).
    Now it has failed after 14 months of faultless performance.
    There seems to be little help available, but searching for solutions finds plenty of problems.
    I get the message "The backup was not performed because an error occurred while copying to the backup disk.
    The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair you backup disk."
    (I have a Time Capsule as my backup disk)
    Disk Utility runs and finds-
    Verifying volume “Backup of xxxxxx’s iMac”
    2010-01-25 12:16:09 +1000: Starting verification tool:
    2010-01-25 12:49:21 +1000: The volume Backup of xxxxxx’s iMac appears to be OK.
    2010-01-25 12:49:21 +1000: Repair tool completed:
    So I search and find "Fix for broken Time Machine backups under Snow Leopard"
    (http://www.andrewgrant.org/2009/09/22/fix-for-broken-time-machine-backups-under- snow-leopard.html) - downgrading to 7.4.1 of the Airport Extreme / Time Capsule firmware.
    But still have the same Time Machine error!
    On to http://forums.macosxhints.com/showthread.php?t=103919&highlight=TimeMachineError
    and try-
    "... suggesting would be something like renaming the existing TimeMachine file on your backup disk - e.g. add a date to the end of it.
    And then go onto Time Machine preferences and set it up as if it were the first time you used it. (Renaming the file on the backup disk should make Time Machine think that you are starting fresh.)"
    So, using Finder, I opened my Time Capsule and renamed "xxxxxx’s iMac_00224135e6fb.sparsebundle" as "091222xxxxxx’s iMac_00224135e6fb.sparsebundle091222"
    And finally, this worked - I have my backups to 22 December and a complete backup as at today and hopefully for at least another 14 months!

    pjh42 wrote:
    G'day (from Queensland, Australia)
    Not for the first time Time Machine has broken down - originally in September 08 (I just can't recall how I fixed it!!).
    Now it has failed after 14 months of faultless performance.
    There seems to be little help available, but searching for solutions finds plenty of problems.
    On the contrary. At the top of this forum are four *User Contributed Tips,* including one on Troubleshooting that would have saved you a great deal of time.

  • Time Machine Error. Unable to complete backup. An error occurred while copy

    I purchased my iMac 24" in February.
    After I had set up the machine I configured an IceCube Firewire 300 GB (Seagate) Hard Drive as a backup volume and flicked the switch in Time Machine. All went as expected. I even restored my whole hard drive from the Time Machine volume about a month ago after I repartitioned the boot volume to set up Boot Camp. No problems.
    About a week ago I purchased a 500GB WD HDD and set it up inside the IceCube enclosure (I remembered to make it the "Master" disk too!!). I partitioned it with Disk Utility with a GUID Mac OS X (Journaled) partition for my Leopard boot partition, and as MS-DOS FAT32 for my Boot Camp external partition. I used Carbon Copy Cloner to copy all the Windows files across from Boot Camp to the new FAT32 partition and set up Time Machine to make a backup of the Leopard boot partition.
    After several hours Time Machine stopped with the error message above. ("Time Machine Error. Unable to complete backup. An error occurred while copying files to the backup").
    I have spent days formatting the new WD drive, repairing permissions on the boot drive, excluding large files and cache files from the backup in Time Machine to no avail. Every time I get the same message. I even set up another 200GB firewire drive to see if it was anything to do with the enclosure of WD HDD. Same result!!
    I have searched these forums for any ideas, and have done wide searches with Google but nothing has worked.
    I can not understand why my Mac worked perfectly with Time Machine before I installed the new Western Digital Hard Drive.
    What have I missed?

    I keep getting the Time Machine backup error too, like many others. Was fine until just the other day, now, nothing. Although my husband's backs up just fine. I assume it's the 10.5.3 bug everyone else has. I've tried reselecting the drive, running the disk utility, shutting everything on and off... help!
    Here's the console log- anyone know what this means?
    Jun 10 08:37:27 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Starting standard backup
    Jun 10 08:37:27 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Network mountpoint /Volumes/Library not owned by backupd... remounting
    Jun 10 08:37:27 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Network volume mounted at: /Volumes/Library-1
    Jun 10 08:37:43 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Disk image /Volumes/Library-1/Tiffany Danko’s Computer (2)_001b63baf698.sparsebundle mounted at: /Volumes/Backup of Tiffany Danko’s Computer (2)
    Jun 10 08:37:43 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Backing up to: /Volumes/Backup of Tiffany Danko’s Computer (2)/Backups.backupdb
    Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Failed to create progress log file at path:/Volumes/Backup of Tiffany Danko’s Computer (2)/Backups.backupdb/Tiffany Danko's computer (2)/2008-06-09-065427.inProgress/.Backup.234797868.792920.log.
    Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Event store UUIDs don't match for volume: Macintosh HD
    Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Error: (-36) Creating directory 77B4FA27-3E65-4B81-897C-610DEE7BB187
    Jun 10 08:37:48 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Failed to make snapshot.
    Jun 10 08:37:53 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Backup failed with error: 2
    Jun 10 08:37:58 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Ejected Time Machine disk image.
    Jun 10 08:37:59 Tiffany-Dankos-computer-2 /System/Library/CoreServices/backupd[1683]: Ejected Time Machine network volume.

  • Question on Time Machine error log

    I have a program (Time Machine Error Log) that keeps track of the message log entries that occurr after you do a Time Machine backup.
    I am getting two messages each time Time Machine completes a backup.
    Here are the two message from the last log:
    Jan 13 17:39:29 xxxxxx-iMac.local com.apple.backupd[36854]: Error: Error Domain=NSOSStatusErrorDomain Code=-36 "The operation couldn’t be completed. (OSStatus error -36.)" (ioErr: I/O error (bummers)) deleting backup: /Volumes/Time Machine Backups/Back
    Last Successful Backup Message:
    Jan 13 17:39:37 xxxxxx-iMac.local com.apple.backupd[36854]: Backup completed successfully.
    How can there be an error reported stating "deleting backup", then a message stating "Backup completed successfully"?
    If I didn't check the log, I wouldn't know that there was a problem, because the Time Machine preferences pane tells me the last backup time, and the next backup time, indicating all went well.
    I just need some verification that my backups are completing successfully.
    Thank
    Len

    There is a lot of rubbish messages that TM produces.. if the final message is that all is good, then I would say all is good.. it is pretty quick to decide when something isn't good.
    But I would say.. there is only one way to know a backup is good. Restore it.
    You don't need to test restore over current drive.. plug in an external drive and restore.
    You can do a verify.. hold the option key whilst clicking the TM icon in the top menu area.. and the option verify will appear.. click that. It really doesn't test more than files are readable though, AFAIK.
    Do a disk image occasionally.. Disk Utility can create an image.. but superduper even free download version can do a full disk image. Makes me feel safer knowing that I have a backup TM doesn't actually have anything to do with.

  • Is there a solution for Time Machine error?

    I got an error in Time Machine saying backup had failed, a couple of days ago. Spent the next day or two trawling the web and found thousands of postings from people with the same error, but no solution.
    (At least, some people had a solution - they were using PC-formatted hard drives.)
    I've been using Time Machine for a few weeks, and it has only now taken a dislike to my external hard drive, which is connected by FireWire.
    Is there a solution to this problem, or should I revert to using SuperDuper, which I was using successfully before?
    I haven't put in lots of information about the apps I'm running, because this is a general query rather than a specific one. If there's a solution, I'll use it; otherwise I'll wipe the drive and go back to using SuperDuper.

    OisinOg wrote:
    Pondini - Thank you for your slightly hostile reply.
    On the contrary. The statement was: +"found thousands of postings from people with the same error, but no solution."+ I don't know where you found thousands of posts -- there are many here, but certainly not thousands. If you're talking about, say, a Google search, if you actually look at them, many are duplicates, unrelated to your problem, or unrelated to Macs at all -- and there are a number of solutions that seem to have fixed many of the real ones.
    The error message was the standard one: "Time Machine Error - Unable to complete backup. An error occurred while creating the backup directory."
    There's most likely another, better message in your logs. Thus the suggestion about Time Machine Buddy. You can also use the Console app (in your Applications/Utilities folder). Click on Show Log List, then navigate in the sidebar to your system.log (or system.log.0.bz2, etc. for previous ones). You can filter for backupd to get the same TM messages as the widget, but I prefer to view the full log at the date/time in question, as messages from other concurrent processes may have a clue.
    I've gone through the suggestions in some of the helpful replies to those thousands of postings, by wiping my drive, erasing it and reformatting it, first in two partitions using the GUID method in Disk Utility, then in a single partition. But Time Machine still doesn't want to back up to it.
    Sounds a bit like a problem communicating with the drive. The logs may clarify that.
    The hard drive of my computer is 250GB; the external drive is 300GB. Both are SATA drives; the external is connected by FireWire.
    How full are they?
    Thanks for your suggestion of downloading the Time Machine Buddy widget; I'll give it a last try tonight.
    What is the difference between a SuperDuper clone and a Time Machine backup?
    The initial backup of both copies almost everything on your HD, excluding only some caches, temp files, etc., although you can exclude other things. This takes quite a while, of course. Thereafter, only the items that changed are backed-up.
    SuperDuper (and CarbonCopyCloner, which I use, and other, similar apps) are most often used to make bootable "clones" identical copies of your HD -- if your HD fails, you can boot and run from them immediately. With TM, once your HD is repaired/replaced, you restore your system to it from your TM backup.
    Score one for the clones, but TM has it's advantages, too (which is why many of us run both).
    First is, CCC and SD look at every file and folder on your HD to see what changed. This is quite time-consuming and CPU-intensive, so most of us run it once a day (or less often), usually automatically at, say, 3 am. TM, however, runs hourly, but uses an internal File System Event Log of changes, so it is far quicker and less intrusive. There are exceptions, but most users rarely even notice the backups unless they see the icon revolving. On my small system, for example, TM rarely runs over 30 seconds; CCC is at least 15 minutes.
    Second, not only does TM keep previous versions of changed files, but it manages the space and backups for you. It keeps those hourly backups for 24 hours; except the first of the day becomes a daily backup which is kept for a month; one per week becomes a weekly backup that is kept for as long as there's space (it will fill the drive/partition). But it's smart enough, as it deletes the old weeklies, that it won't delete it's copy of anything that still exists on your HD.
    There isn't room to have two 250GB sections on a 300GB drive. I suppose I could get another 250GB drive - I have an IDE enclosure somewhere - but I don't fancy the expense right now.
    Your CCC or SD partition only needs to be as large as your HD, although in a pinch it only needs to be somewhat larger than what's actually used on your HD. If you don't have room for both on the one drive, an even better solution might be to get a pair of smaller portable HDs for CCC/SD. Use one daily for, say, a week, then take it to your safe deposit box, workplace, relative's house, etc. and start with the other. Now you're also protected against fire, flood, theft, direct lightning strike on your power lines, etc.

  • What is Time Machine error code -6584, What is Time Machine error code -6584, What is Time Machine error code -6584

    My mac book pro crashed badly after latest Apple update. I have had to reinstall the the operating system to get my mac book pro working again. Thanks to Apple support team who where helpful and actually got my mac able to load up. I am now trying to restore all my documents from Time Machine but keep getting this error message error code -6584  -Help needed  

    Thanks guys but I am scr***d. All my business documents are back up on Time Machine. Tried the Verify option says back up drive is not available. Am I missing something? I have a WD NAS which has my TM backups on it. I know they are on there because I saw them before the clean reinstallation of the OS X.

Maybe you are looking for