Time Machine Fails when VPN is Active

Running Cisco VPN that allows local access to my 192.168 network with no problem for other applications. However, Time Machine fails to find my local NAS drive when the VPN is active. The NAS and MBP are on the same subnet. Any thoughts or reasons why this is occurring and how to resolve the issue?
Thanks.

If you're using the Cisco client built-in to OSX, be sure that "Send all traffic over VPN" is disabled. With the client from Cisco, I think the checkbox is called something like "Allow local LAN access." Be sure that that is enabled.
Note that this setting can be overridden by the VPN administrator, and often is. (Usually for security or company policy reasons.) So do not be surprised if the checkboxes have no effect for you. If that is the case, then you'll have to speak to the VPN administrator to see if they'll make an exception.

Similar Messages

  • Time Machine fails when trying to backup user folder

    When I try to backup my OSX 10.6.7 MB Pro to either an USB-attached external disk or a time capsule the backup fails shortly after the scan run, leaving me with the message "The backup was not performed because an error occured while copying files to the backup disk." The scan run is taking quite some time (more than 300'000 objects),,
    Only if I exclude my own user folder (respectively the ~) from backup the timemachine backup runs smoothly, but of course without my user data.
    The MB has an SSD with 250 GB capacity of which 188 GB are used.
    If you can assist in any way, many thanks to you!
    Kind regards
    Stefan

    Not one of Apple's best messages. 
    See #C3 in Time Machine - Troubleshooting.   It will show you how to locate the message(s) that describe the problem, then help you fix it.    If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results.

  • Time Machine Fails When Trying to Backup Certain Files

    Time Machine is having problems with some files I have copied from a Windows computer. I am a web developer and I moved my client files from a Windows PC to my iMac. Most of the files backup properly but some don't. When Time Machine tries to backup those files, it fails.
    I downloaded Time Machine Buddy and it has helped me identify files that can't be backed up. However, the only solution that works is to delete the files. *Since these are client files, that is not an acceptable solution.*
    When I look at "Get Info", there are several listings for admin, system, staff, owner, and everyone. Each list shows the permissions to be "Custom." I have changed some to "Read and Write" and I have changed all of them to "Read and Write." Neither of these have fixed the problem. Time Machine still fails on the same files.
    I really need some smart Mac person to tell me what I can do to fix this problem. Thanks.

    Csound1 wrote:
    Correct, at no time did I say that this was for everyone, it is in fact for anyone who wishes to spend his time working rather than restoring.
    For most folks, a hard drive failure is not exactly common. If they are to you, something is seriously wrong.
    Replacing a drive in a unibody MBP is a 5 minute operation! & they are cheap!
    Yes, for those who are mechanically inclined and not afraid to open up a Mac. What percentage of users do you suppose that is?
    As to your second point, I suggested specifically using a TM type backup in addition to the clone, I stated that my choice is a realtime service that stores my files (a) as files that I can access from anywhere (b) with versions (including deletions) going back as far as my storage limits allow.
    And how would you use that to roll back to a previous version of your entire system?
    I don't want to have to deal with TM permissions/user/network/extreme/forgetting to delete till it gets full blahblahblah
    Huh? Now you're adding all sorts of other things.
    Permissions? A user account is a user account, and Time Machine maintains the permissions.
    Network? Your clone is on a network? How do you boot up from that?
    Extreme? You use an Airport Extreme for your network clone?
    Forgetting to delete until it's full? Yes, that's exactly what you mentioned above: "versions (including deletions) going back as far as my storage limits allow."
    PleasePondini, do it your way and I'll do it mine
    Obviously.

  • Time Machine fails when trying to backup

    I have a macbook running 10.5.8.  I am trying to use time machine with my iomega external hard drive but I keep getting an error that the backup failed.  I have been successful with backups in the past with this same hard drive.  Any ideas what's going on

    unfortunately there is no fix for this and there never will be
    unless you sell both boxes and get a Time Capsule
    in the meantime you need to mount the drive you are backing up to
    select it as your backup drive in time machine then unmount it (drag to trash can)
    and let time machine mount it
    of course once it's mounted your next scheduled backup will also fail
    so unmount it every time or turn off time machine and do backups every once in while

  • Time Machine fails with drive connected to Airport Extreme

    First of all, I've had myriad problems with Time Machine, even when it was connected directly to my MBP. But after the recent updates, I installed them and hoped it would work wirelessly. I re-formatted my 120GB OWC drive (my MBP has 30GB available of 120GB). I have already been down the road of making sure I've formatted the drive correctly.
    I excluded my system folder, my entourage identity, downloads, and my Parallels Windows XP file from the backup. I connected the drive to my Airport Extreme (not the gigabit version) and started the backup. Basically, it gets about 5 GB into the backup, moving very slowly, and then fails, saying that it couldn't locate the drive. And that part is true--I can't seem to locate the drive on my network anymore either. And eventually, after another hour or so, my Airport Extreme drops as well, and isn't even available. Even when I unplug the AE, and plug it back in, it still doesn't show up...but after about an hour or so...it pops back up and is available, working fine. My iPhone sees the same problem with AE dropping and then coming back. When the wireless service drops, I can plug an ethernet cable into the AE and I can access the internet fine, so it's not the cable modem (Time Warner).
    Is anyone else seeing this problem? I'm no guru and appreciate that Macs just seem to work correctly. But Time Machine is making me pull my hair out. It's been an unmitigated disaster from start to finish.
    Appreciate any help!

    This is probably the most sensible post I've read on the issue. I've spent the last 2 days trying to get my 500GB LaCie Quadra hard drive to work with my Airport Extreme (the square one, yes .
    I've formatted it correctly with the Disk Utility (multiple times!).
    Airport Utility sees it just fine. I can back up to it when it is connected directly to my MacBook via USB.
    But when the drive is connected via USB to the Airport Extreme, Time Machine doesn't see it -- unless I turn on file sharing with guest access read and write. That seems less-than-secure to me even if my network is protected.
    Without guest access the drive appears in the shared section of the Finder, but I can't connect to it. I've tried all three combinations under "Secure Shared Disks" but none of them work.
    Seems like its just too flaky to use an external disk connected to the Airport Extreme.
    Happy to be pointed in the right direction... are there specific file permissions I should be setting my external drive to?
    Thanks,
    Rich

  • Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

    Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

    Arghhhhhhhhhhhhhhhhhhh!!!!!!
    After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
    Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
    Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
    The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
    I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive.  But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
    How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
    Words, almost, fail me.

  • Can't access Time Machine settings when AirPort (WiFi) is on.

    Problem:
    My iMac (2.66 MHz Inter Core Duo) with 10.5.8 needs an upgrade to Maverick...it is connected to my home network with AirPort
    I have a NAS on my home network (Verbatim MediaShare 2TB) wired connected, which I have had working as a drive for TM-backups. It stopped working with TM about 1,5 year ago, did never figure out why, backups just failed.
    Now I want to get it going again for a fresh backup prior to the OS upgrade.
    The issue I am facing now is that I cant access the settings for the backup drive in TM settings as the AirPort is on.
    I need AirPort on to be able to mount the drive of the NAS, but then I cant access TM-settings. If I switch of AirPort temporarly to access TM-settings the drive which I need to select is dismounted.
    I am kind of stuck. Why is this happening?
    BRG
    /Johan

    BDAqua wrote:
    Got me really confused, sorry...
    Can't access Time Machine settings when AirPort (WiFi) is on.
    the NAS Volume for backup "COMPUTERSBACKUP$" can be mounetd as it should when AirPort is on.
    Hi, label explains the problem pretty much...
    That is: The dialog in TM where the disk for TM to put backuped data is not accessable when the iMac has connection to my home network. The button is there, but when i press it notheing happends. If i deactivate the network interface, the dialog opens.
    I hope this claryfy my problem.
    BRG
    /Johan

  • Time machine fails on new iMac

    I upgraded to a new 21.5" iMac from a g5 iMac.  I transferred my files and have two external hard drives one with photos and one for time
    (all worked great on the g5). Main programs in use on the g5 is lightroom and iTunes for the iPhone and iPad.    I have been unable to get time machine to work with my files installed. Both the iMac and backup drive have been replaced with no results. When ihave a clean system with my files I have been able to use time machine for two days before it failed at best. 
    Every time time machine fails my system starts to act strange and I am forced to do a wipe and reinstall. Have done a complete wipe and install on the iMac and reformatted the new external drive (have left the photo drive off as I got a failure with out that drive connected).  I have not installed any of my files and so far time machine works.  I suspect some sort of corrupt file. Any suggestions on the next steps? I plan an waiting a few more days on the backups just to be sure they work without my files or programs installed. 

    Wire fox terrier wrote:
    Is there any software that can detect corrupt files? Disk utilities says all drives are fine.
    Not really. 
    Disk Utility (and other similar apps) check the File System on the disk (the various directories, catalogs, etc., for completeness and consistency, not the internal layout of each file.
    Since different kinds of files have different data layouts, and no central registry of the rules,  there's no realistic way to check all the possibilities.
    Unlike most backup apps, Time Machine does index them, however, and in the process sometimes finds problems.  If there's a serious problem, it normally sends a message naming the file, then fails, so you can exclude the file from being backed-up, fix it, or delete it.
    Considering the symptoms you're seeing, it's likely either an intermittent hardware problem, or something you dragged from your G5 was already damaged, or damaged in the process, or came from a different OS (like Windoze) and didn't get translated properly.   Since you get no messages, it's going to be very tedious to narrow it down.
    From your previous post:
    Both a capture program from apple tech and send to apple via about this Mac (system profiler) would not work.
    Do you mean they wouldn't run properly, or you sent them to Apple and they either haven't responded or said they couldn't find anything?

  • Time machine fails on iMac, MacBook Pro

    Time machine fails on macs w/local disks at 2 diff sites. Err Msg: "Unable to complete backup. An error occurred while creating the backup folder." First try after re-start wrks, 2nd fails.  Only connection via cloud- iCloud, Dropbox, Evernote.  Could problem be open files to cloud storage?

    Logs from backups on MacBook Pro.  First is succressful backup after machine restart.  Second is failure at 1 hour later. 
    Manual Backup after machine restart:
    10/2/13 9:15:40.221 PM com.apple.backupd[1835]: Starting manual backup
    10/2/13 9:15:40.312 PM com.apple.backupd[1835]: Backing up to: /Volumes/LaCie TIME MACHINE/Backups.backupdb
    10/2/13 9:15:50.315 PM Safari[1814]: CGContextClipToRect: invalid context 0x0
    10/2/13 9:15:50.803 PM com.apple.backupd[1835]: Using file event preflight for Macintosh HD
    10/2/13 9:16:02.158 PM com.apple.backupd[1835]: Will copy (2.22 GB) from Macintosh HD
    10/2/13 9:16:02.283 PM com.apple.backupd[1835]: Found 8317 files (2.28 GB) needing backup
    10/2/13 9:16:02.290 PM com.apple.backupd[1835]: 3.74 GB required (including padding), 998.3 GB available
    10/2/13 9:16:39.206 PM com.apple.launchd[1]: (com.apple.iCloudHelper[1810]) Exited: Killed: 9
    10/2/13 9:16:39.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1810 [com.apple.iCloud]
    10/2/13 9:16:39.992 PM com.apple.launchd[1]: (com.apple.hiservices-xpcservice[1189]) Exited: Killed: 9
    10/2/13 9:16:39.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1189 [com.apple.hiserv]
    10/2/13 9:16:40.255 PM com.apple.launchd.peruser.501[194]: ([0x0-0xe00e0].com.apple.inputmethod.ironwood[1188]) Exited: Killed: 9
    10/2/13 9:16:40.000 PM kernel[0]: memorystatus_thread: idle exiting pid 1188 [DictationIM]
    10/2/13 9:16:40.502 PM com.apple.launchd[1]: (com.apple.xpcd.CA000000-0000-0000-0000-000000000000[549]) Exited: Killed: 9
    10/2/13 9:16:40.000 PM kernel[0]: memorystatus_thread: idle exiting pid 549 [xpcd]
    10/2/13 9:16:40.801 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[543]) Exited: Killed: 9
    10/2/13 9:16:40.000 PM kernel[0]: memorystatus_thread: idle exiting pid 543 [XType.FontHelper]
    10/2/13 9:16:41.051 PM com.apple.launchd.peruser.501[194]: (com.apple.printtool.agent[347]) Exited: Killed: 9
    10/2/13 9:16:41.312 PM com.apple.launchd.peruser.501[194]: (com.apple.tccd[303]) Exited: Killed: 9
    10/2/13 9:16:41.000 PM kernel[0]: memorystatus_thread: idle exiting pid 347 [printtool]
    10/2/13 9:16:41.000 PM kernel[0]: memorystatus_thread: idle exiting pid 303 [tccd]
    10/2/13 9:16:41.606 PM com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[286]) Exited: Killed: 9
    10/2/13 9:16:41.000 PM kernel[0]: memorystatus_thread: idle exiting pid 286 [xpcd]
    10/2/13 9:16:41.859 PM com.apple.launchd.peruser.501[194]: (com.apple.accountsd[277]) Exited: Killed: 9
    10/2/13 9:16:42.000 PM kernel[0]: memorystatus_thread: idle exiting pid 277 [accountsd]
    10/2/13 9:16:42.187 PM com.apple.launchd.peruser.501[194]: (com.apple.coreservices.appleid.authentication[260]) Exited: Killed: 9
    10/2/13 9:16:42.000 PM kernel[0]: memorystatus_thread: idle exiting pid 260 [AppleIDAuthAgent]
    10/2/13 9:16:43.000 PM kernel[0]: memorystatus_thread: idle exiting pid 205 [cfprefsd]
    10/2/13 9:16:51.170 PM com.apple.SecurityServer[16]: Session 100028 created
    10/2/13 9:17:06.818 PM mdworker32[1856]: CGSGetDisplayBounds: Invalid display 0x00000000
    10/2/13 9:17:06.844 PM mdworker32[1856]: bootstrap_look_up2 failed with 0x44c
    10/2/13 9:17:07.000 PM kernel[0]: Sandbox: sandboxd(1857) deny mach-lookup com.apple.coresymbolicationd
    10/2/13 9:17:09.167 PM sandboxd[1857]: ([1856]) mdworker32(1856) deny mach-lookup com.apple.PowerManagement.control (import fstype:hfs fsflag:480D000 flags:200000056 diag:0 uti:org.openxmlformats.spreadsheetml.sheet plugin:/Library/Spotlight/Microsoft Office.mdimporter - find suspect file using: sudo mdutil -t 4041526)
    10/2/13 9:17:31.377 PM sandboxd[1862]: ([1861]) mdworker(1861) deny file-write-owner /Users/dwight****/Library/Containers/com.apple.Notes/Data/Library/Notes/NotesV1 .storedata-wal (import fstype:hfs fsflag:480D000 flags:200000056 diag:0 uti:com.apple.notes.externalrecord plugin:/Library/Spotlight/Notes.mdimporter - find suspect file using: sudo mdutil -t 344898)
    10/2/13 9:17:31.000 PM kernel[0]: Sandbox: sandboxd(1862) deny mach-lookup com.apple.coresymbolicationd
    10/2/13 9:17:31.383 PM sandboxd[1862]: ([1861]) mdworker(1861) deny file-write-owner /Users/dwightdavy/Library/Containers/com.apple.Notes/Data/Library/Notes/NotesV1 .storedata-shm (import fstype:hfs fsflag:480D000 flags:200000056 diag:0 uti:com.apple.notes.externalrecord plugin:/Library/Spotlight/Notes.mdimporter - find suspect file using: sudo mdutil -t 344898)
    10/2/13 9:19:09.358 PM coreaudiod[239]: Disabled automatic stack shots because audio IO is active
    10/2/13 9:20:01.145 PM com.apple.backupd[1835]: Copied 42922 files (2.28 GB) from volume Macintosh HD.
    10/2/13 9:20:01.374 PM com.apple.backupd[1835]: Using file event preflight for Macintosh HD
    10/2/13 9:20:02.053 PM com.apple.backupd[1835]: Will copy (2.4 MB) from Macintosh HD
    10/2/13 9:20:02.055 PM com.apple.backupd[1835]: Found 47 files (2.4 MB) needing backup
    10/2/13 9:20:02.056 PM com.apple.backupd[1835]: 1.04 GB required (including padding), 995.95 GB available
    10/2/13 9:20:27.587 PM com.apple.backupd[1835]: Copied 1558 files (2.4 MB) from volume Macintosh HD.
    10/2/13 9:20:28.894 PM com.apple.backupd[1835]: Created new backup: 2013-10-02-212027
    10/2/13 9:20:32.846 PM com.apple.backupd[1835]: Starting post-backup thinning
    10/2/13 9:20:46.177 PM coreaudiod[239]: Enabled automatic stack shots because audio IO is inactive
    10/2/13 9:22:56.417 PM com.apple.backupd[1835]: Deleted /Volumes/LaCie TIME MACHINE/Backups.backupdb/Macintosh/2013-07-29-063629 (1.98 GB)
    10/2/13 9:23:19.037 PM com.apple.backupd[1835]: Deleted /Volumes/LaCie TIME MACHINE/Backups.backupdb/Macintosh/2013-08-10-132056 (14 MB)
    10/2/13 9:25:12.837 PM com.apple.backupd[1835]: Deleted /Volumes/LaCie TIME MACHINE/Backups.backupdb/Macintosh/2013-08-10-120140 (159.3 MB)
    10/2/13 9:25:25.927 PM com.apple.backupd[1835]: Deleted /Volumes/LaCie TIME MACHINE/Backups.backupdb/Macintosh/2013-09-07-124051 (5.2 MB)
    10/2/13 9:26:32.288 PM com.apple.backupd[1835]: Deleted /Volumes/LaCie TIME MACHINE/Backups.backupdb/Macintosh/2013-09-07-122250 (86.1 MB)
    10/2/13 9:26:32.288 PM com.apple.backupd[1835]: Post-back up thinning complete: 5 expired backups removed
    10/2/13 9:26:32.980 PM com.apple.backupd[1835]: Backup completed successfully.
    Info from failed backup about an hour later.   I've included a lot of log over the next hour.
    10/2/13 10:14:15.315 PM com.apple.backupd[1903]: Starting automatic backup
    10/2/13 10:14:15.000 PM kernel[0]: nspace-handler-set-snapshot-time: 1380766457
    10/2/13 10:17:28.000 PM kernel[0]: disk2s2: I/O error.
    10/2/13 10:22:29.000 PM kernel[0]: disk2s1: I/O error.
    10/2/13 10:30:00.000 PM kernel[0]: disk2s2: I/O error.
    10/2/13 10:33:37.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1918[GoogleSoftwareUp] clearing CS_VALID
    10/2/13 10:34:31.000 PM kernel[0]: disk2s1: I/O error.
    10/2/13 10:41:28.953 PM AddressBookSourceSync[1925]: [CardDAVPlugin-ERROR] -[CDXAccount oauthToken]: Failed to find account for identifier: F50ABFD9-1476-4AFF-A120-D99EEA697FC5
    10/2/13 10:41:29.135 PM AddressBookSourceSync[1925]: [CardDAVPlugin-ERROR] -getPrincipalInfo:[_controller supportsRequestCompressionAtURL:https://dtd%[email protected]:443/100002105340508///dtd%[email protected]:443/100002105340508/] Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fdd1a05f160 {CoreDAVHTTPHeaders=<CFBasicHash 0x7fdd1a013be0 [0x7fff76470110]>{type = immutable dict, count = 10,
    entries =>
              0 : Case Insensitive Key: Pragma = <CFString 0x7fdd1a0c4f20 [0x7fff76470110]>{contents = "no-cache"}
              1 : Case Insensitive Key: X-FB-Rev = <CFString 0x7fdd1a012cd0 [0x7fff76470110]>{contents = "955235"}
              2 : Case Insensitive Key: Content-Type = <CFString 0x7fdd1a053590 [0x7fff76470110]>{contents = "text/plain; ; charset="utf-8""}
              3 : Case Insensitive Key: Connection = <CFString 0x7fdd1a0cf770 [0x7fff76470110]>{contents = "keep-alive"}
              6 : Case Insensitive Key: Date = <CFString 0x7fdd1a0a1a80 [0x7fff76470110]>{contents = "Thu, 03 Oct 2013 02:41:27 GMT"}
              8 : Case Insensitive Key: X-FB-Debug = <CFString 0x7fdd1a03ac40 [0x7fff76470110]>{contents = "KPKDvnlZgJGCZpzZtvurAhFe+8NZdCVJxFI28UpSlAo="}
              9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fdd19436e60 [0x7fff76470110]>{contents = "OAuth realm="Facebook WebDAV", Basic realm="Facebook WebDAV""}
              10 : Case Insensitive Key: Content-Length = <CFString 0x7fff7644a0a0 [0x7fff76470110]>{contents = "40"}
              11 : Case Insensitive Key: Cache-Control = <CFString 0x7fdd1a083d10 [0x7fff76470110]>{contents = "private, no-cache, no-store, must-revalidate"}
              12 : Case Insensitive Key: Expires = <CFString 0x7fdd1a051c50 [0x7fff76470110]>{contents = "Sat, 01 Jan 2000 00:00:00 GMT"}
    10/2/13 10:44:34.000 PM kernel[0]: disk2s2: I/O error.
    10/2/13 10:44:34.060 PM com.apple.backupd[1903]: Backing up to: /Volumes/LaCie TIME MACHINE/Backups.backupdb
    10/2/13 10:47:34.000 PM kernel[0]: disk2s1: I/O error.
    10/2/13 10:48:35.000 PM kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0xffffff8016215400, 3 -> 2) timed out after 100772 ms
    10/2/13 10:51:36.000 PM kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0xffffff8016215400, 3 -> 2) timed out after 100801 ms
    10/2/13 10:54:36.000 PM kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0xffffff8016215400, 3 -> 2) timed out after 100772 ms
    10/2/13 10:57:37.000 PM kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0xffffff8016215400, 3 -> 2) timed out after 100747 ms
    10/2/13 10:59:06.000 PM kernel[0]: disk2s2: I/O error.
    10/2/13 10:59:06.000 PM kernel[0]: jnl: disk2s2: do_jnl_io: strategy err 0x5
    10/2/13 10:59:06.000 PM kernel[0]: jnl: disk2s2: write_journal_header: error writing the journal header!
    10/2/13 10:59:36.000 PM kernel[0]: disk2s2: I/O error.
    10/2/13 11:00:38.000 PM kernel[0]: IOSCSIPeripheralDeviceType00::setPowerState(0xffffff8016215400, 3 -> 2) timed out after 100916 ms
    10/2/13 11:02:07.000 PM kernel[0]: disk2s1: I/O error.
    10/2/13 11:14:09.000 PM kernel[0]: disk2s2: I/O error.
    10/2/13 11:14:39.000 PM kernel[0]: disk2s1: I/O error.
    10/2/13 11:15:15.000 PM kernel[0]: nspace-handler-set-snapshot-time: 1380770117

  • After updating my MacBook Pro to yeosemite I want my old screen saver picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this

    After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".

    Can you browse the Time Machine drive from Finder?
    If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'

  • Hi, ive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?

    hi, ive been backing up my computer to an external hard drive (with time machine). When i buy a new macbook will that hard drive put all my info on to the new computer?

    When you boot the new machine for the first time, you'll be prompted to import your data from a Time Machine backup.

  • I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

    I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

    Maybe you might find some info to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

  • Time Machine stalls when trying to back up to Time Capsule or an external hard drive.

    TIme Machine stalls when trying to back up to Time Capsule or an external hard drive.  Time Machine shows a message such as "Backing up 4MB of 9.00GB" but nothing happens for hours.

    Are you really running 10.6.4 OS?
    What model TC and what firmware?
    Wireless or wired?
    How is the TC setup?
    If TM can work to neither a TC or external hard disk it is more likely the computer is faulty hard disk..
    Do a verify of the disk.
    See A5 here.
    http://pondini.org/TM/Troubleshooting.html

  • TS1550 Back up to time machine failed.  Error, "Files can't be copied onto the backup disk because it appears to be read-only". Back up has been working.  drive is not read only.  How do I fix this?

    Back up to time machine failed.  Error, "Files can’t be copied onto the backup disk because it appears to be read-only". Back up has been working.  drive is not read only.  How do I fix this?

    Hello,
    http://pondini.org/TM/C6.html

  • I am getting error "The disk is used for Time Machine Backup" when installing the new OSX Mountain Lion upgrade"

    I am keep getting this error "The disk is used for Time Machine Backup" when installing the new OSX Mountain Lion" when doing the upgrade to newly OS.

    The folder would be at the root of your hard drive. Double-click Macintosh HD and look there.
    If it isn’t there, I’m not sure what it is seeing.

Maybe you are looking for

  • Avoid from the error message: "FRM-41816: Attempt to create existing timer"

    Hi, I create a timer in "on-insert" trigger in data-block level, like this: timer_id := Create_Timer ('saving_inserting_timer' , 1 , NO_REPEAT); in the trigger "when-timer-expired" in form level,  I use this timer, like this:  timer_id := FIND_TIMER(

  • Opening RAW files with Bridge CS3

    When I try to open a RAW file from Bridge CS3 it defaults to Mac Preview and does not open Photoshop Elements 6 RAW converter.  If I open a RAW file outside of Bridge it work fine.  What did I do wrong??   Using a iBook G4 with OS 10.5.8 and Photosho

  • Problem in deleting a Master Table

    Hi,   Due to wrong naming convention, I created a table with correct name and would like to delete the old customizing table.   In SE11, I type the table name on Database Table, and press delete (the bin icon). But system stops me with a prompt: <b>"

  • No pdf User Manual?? (Not!)

    It seems that the A3 user manual is only accessible through the Aperture Help menu. I find this very frustrating - I commonly like to read such things in Preview, or even on my iPhone. In fact, one of the big reasons I am interested in an iPad is to

  • Is Verizon able to fix a cracked screen of an HTC Rhyme?

    Someone bumped into me today causing my phone to hit the concrete.The screen cracked in 3 places. Is there anyway Verizon can replace the screen or something? Its a little worse than shown in the picture.