Time Machine Full HDD Restore not recognizing Login Password

Hi, my old G5 had Leopard running on it, the Logic Board failed so I got another, I decided to upgrade the HDD, Installed Leopard, connected my Lacie Firewire 800 External Drive to install the previous files/settings from Time Machine, All went fine until the Login password shook around saying it was incorrect. Its without a doubt the right password, no question about it. Tried another keyboard incase it was faulty, it wasn't. Had to put old HDD back in, works fine but I'm concerned, if this HDD fails, are my hourly backups rendered useless as I cant access them on a new install??
Please help, Im still a little out of my comfort zone as fairly new to Mac.

richeyf wrote:
Hi, thanks for your post, so I can assume from this that, if my current HDD failed, if I followed the instructions in item #14 of the Frequently Asked Questions, all would be well.
Yes, it should, unless you'd excluded important things from TM, and as long as your backups aren't corrupted.
Also, since I started backing up using TM on my new machine, my external drive now has 2 sets of back ups, one from the old machine and one from my current one.
TM started a whole new "sequence" of backups, since it thinks you got a new Mac. It uses the +Ethernet Address+ of your Mac, not it's name or serial number, to distinguish one from another. Unfortunately, that address is embedded in the hardware of the logic board. (Small consolation: in Snow Leopard, you get a prompt allowing TM to continue using the old set of backups.)
Should I just delete the old one to create more space as Im rapidly running out, or will it mess things up?
If you're going to try a full restore, obviously not until it's complete and everything checks out. So, as mentioned in #14, immediately turn TM off until you're sure. Then erase the TM disk with Disk Utility.
If you're not going to do the full restore, then you have two unattractive choices:
Manually delete backups from the old set, but *+not via the Finder+*. Use the +*Browse . . .+* option (see #17 of the FAQ Tip), then delete them one at a time via #12 there.
Erase the drive with Disk Utility and let TM start fresh.

Similar Messages

Unable to boot after Time Machine full system restore!!

I was having some serious slowdowns with my computer. I did multiple RAM and HD hardware tests, everything seemed to be working fine. I had recently deleted a bunch of files in order to free up some HD space, so I thought that may be the culprit. So I did a Time Machine backup and restored the Powerbook to it's original 10.3 software. All was fine. Then I upgraded back to 10.5 and all was fine. Then I did a Time Machine full system restore overnight and got the message "Your restore was successful, you must now restart your computer" (or something to that effect). Now I get the start-up chime and startup screen (apple logo) but then the computer shuts itself down. I have reset the PMU and PRAM to no effect. I have tried booting up in safe made, also no dice. I have tried starting it up with the time machine HD attached - doesn't help. I guess I'll need to hit the genius bar but wanted to ask the friendly discussion forum folks first. thanks in advance.

Hi coldengray
Did you try to start from your System-CD? Hold down C-key during startup, start DiskUtility from the menu and verify/repair disk and permissions there.
If the CD is not available you can also connect your TimeMachine-Disk, select it as startup volume in System Preferences/StartupDisk, restart and then run DiskUtility from folder Applications/Utilities
Good luck P

Time Machine: Full System Restore On New iMac...

I currently use Time Machine on my 24" iMac with a 500GB external hardrive. If something were to happen to my current iMac (i.e. My kid knocks it off the desk and it breaks), and I was forced to buy a new one, would I be able to use Time Machine to restore the new iMac to the last Back-Up of the old iMac? If so, would it automati ally transfer all of my pictures, movies, music, etc. to the new iMac as well? Thanks for any help y'all can give me on this subject.

J Double DuBB wrote:
I currently use Time Machine on my 24" iMac with a 500GB external hardrive. If something were to happen to my current iMac (i.e. My kid knocks it off the desk and it breaks), and I was forced to buy a new one, would I be able to use Time Machine to restore the new iMac to the last Back-Up of the old iMac?
not using full system restore utility on the leopard install DVD. your current system lacks hardware drivers that would be needed for a newer computer and if you do a full system restore of your current computer onto a newer computer using the restore utility on the leopard DVD it will most likely not even boot.
however, during the original computer setup you'll be given an option to transfer user data, settings and applications from a TM backup of your old computer. that option does not transfer system files but it does transfer everything else including your pictures, movies, music etc.
You can also do the same thing later using Migration Assistant (it's in /Applications/Utilities).

Time Machine External HDD is not visible.

The drive is a WD 500 GB. It is plugged in through the USB port in the back of the computer. I have tried switching the USB ports. The HDD has its on power supply and does not depend on computer for power. Drive worked fine at first but now it does not show up on the desktop. It used to show up as a time machine drive. When I open Disk Utility it sees the drive in the box on the left side. I can not select any options under the first aid tab except for the check box. Under erase, I can select Volume Format and Name. When I tired to format the disk to Mac OS Extended (Journaled), it says, "Disk Erase failed witht he error: Operation timed out." I'm not sure what else to do.

Hi, and welcome to the forums.
You may need to go disk shopping.
Have you had this disk for long? Were you using it on a Mac, or a PC? What is/was on it?
What does DU show for *Partition Map Scheme* when you click the top line (with the make and size)?
What does it show for Format when you click the second line (and any others, if there are any more)?

Time Machine external hard drive not recognized

I connected an Iomega Ultramax 500GB Hard Drive to my imac to set up time machine. It has worked well for years but now has disappeared and time machine no longer backs up to the hard drive. The drive is recognized in the system profiler and I have tried Repair Disk with the Disk Utility but get the message:
Invalid record count
Volume check failed
Error: Filesystem verify or repair failed.
Can someone give me some guidance? Thanks!

If you don't have backups, and the drive doesn't work, you may have lost all the data. There are ways to try to recover data from a failed drive, but I have no experience with that and can't help. If the data is valuable to you, your best chance is to send the drive to a data-recovery service such as DriveSavers, but that will be very expensive.

Time machine full after restore

Hi all
I recently suffered the 'pleasure' of a HD failure in my 2008 24". An apple engineer replaced the drive and reinstated my data from time machine - all good so far. However, my mac doesnt want to relink with my existing backups and continue the save/delete old entries like before. I can still access my old backups, but It seems to want to create a new time machine on the very little space i have left on the drive for new backups.
Is there a way of relinking to the previous backup or is it a case of wipe/restart, which i'd like to avoid.
Ta.
Dezza.

Hllo:
Time machine will try to make a complete new backup as a result of the new drive.
I would (I am not you) erase and format the external drive and let Time Machine make the new backup.
Barry

Time Machine on FireWire drive not recognized

Got an iMac with a FireWire drive set up as a TimeMachine volume.
In addition, I have a MBP, connected to the network via Wifi (Airport Extreme).
Under Snow Leopard, both Macs were able to do TimeMachine updates to the FireWire drive connected to the iMac.
Now, under Lion, the TimeMachine volume is still recognized and functional (i.e. successful backup) for the iMac, but not visible anymore for the MBP.
The MBP can't see the TimeMachine volume, let alone back up to it.
What gives ?
Is this perhaps a network or access authorization issue ?
Thanks.

Ok, so here some more information.
iMac (Lion) with connected FW HD, thus hosts the TimeMachine volumes, connected via Ethernet to AirportExtreme
MBP (Lion), connected via WLAN to AirportExtreme
Connecting FROM iMac to MBP:
Sidebar - Shared computers: OK
Terminal SSH: OK
Finder - Go - Connect to Server: OK
Connecting FROM MBP to iMac:
Sidebar - Shared computers: Error "Connection failed"
Terminal SSH: OK
Finder - Go - Connect to Server: Error "There was a problem connecting to the server"
I'm really beginning to think my MBP Lion install is borked.

How to access root apps folder again in Time Machine after a restore?

I just did a Time Machine full system restore which worked, but now it doesn't look like Time Machine is backing up my root level apps folder. All of my root apps were indeed restored, but if I try to go into Time Machine with my (root) Apps folder open, it switches the folder contents to my user apps instead so I don't have access to the root apps in TM. It doesn't appear to be backing them up at the root level anymore either (nothing in the exclusions that would cause this). Any ideas on what happened here? I have just one admin level account on this machine.

cubytus wrote:
Hi everyone,
I just reformated the MacBook hard drive using Extended HFS+, journaled partition to get rid of the case-sensitiveness, which is incompatible with just ONE of my softwares. As such, TM partition is formatted as Extended HFS+, journaled and case-sensitive.
This mis-match is likely to cause trouble in the future. If you have, for example, two files named "FileA" and "filea" in the same folder on the TM drive, and try to restore them to your case-ignorant HD, TM is going to have a problem. I've never tried it, so I can't tell you whether it will overlay the first one it restores with the second, or crash, or what, but it can't be done.
And you may have some of these without realizing it -- if you ever changed a capital to lower-case, or vice-versa, after a file's initial backup, it's a possibility.
Indeed, I checked directly in the Time Machine tree on the external hard drive with Apple+I keys, and 'cubytus' was not listed in the permissions.
No, TM automatically denies everything to everybody, among other things, in it's backups, to keep us mere mortals from messing with them. The original file permissions are kept separately, and TM should restore them along with the files, as they were.
What you're probably seeing is, the user that you're signed-on as won't have those permissions, once TM restores the files. I'd suggest trying the same procedure as your other, or original user -- see if you get the same message.

Mac enters a deep sleep during Time Machine full restore

I have the problem listed in the subject. Here is my configuration:
Mac Pro (early 2008), dual quad-core Xenon 2.8 GHz, 10 GBs of RAM, hard disks as follows:
Bay 1: 1 TB HD System, running OS X 10.6.2, ~500 gigs used, ~400 gigs free, small Bootcamp partition
Bay 2: 1.5 TB hard disk, used exclusively for backing up the drive in Bay 1
Bay 3: 1 TB spare drive, currently contains only OS X 10.6.2 plus some utilities. This drive is not backed up.
Bay 4: empty
OK, so now for what happened. Recently, I had an issue with my main drive (bay 1); rather than attempt to fix it, I decided to reformat the drive and restore from a Time Machine backup. I booted off the Snow Leopard DVD, chose the Restore option from the Utilities menu, and started the restore.
When I returned to the Mac after a couple of hours to see how things were going, the Mac was asleep and could not be woken up by moving the mouse, clicking its buttons, or hitting any key on the keyboard. The (wired) keyboard was totally inactive (no caps lock light, etc.). Pressing the Power button on the Mac Pro didn't do anything, nor could I connect to it from my MacBook Pro by means of screen or file sharing. The only thing I could do was to hold the power button in until the machine turned off completely. Restarting from the DVD worked fine.
I looked for answers on the web, and I found a couple of posts here. One of them suggested setting the sleep parameter to "Never" (if one still had a boot partition); I did that by booting from the disk in bay 3, not quite believing it would work since I was booting from the DVD to do the restore.
Once booted from the DVD, I tried the other answer I had found, and that is executing the command "pmset sleep 0" in the terminal before launching the restore. I got an error to the effect that the write operation failed (duh!), but I thought that maybe the parameter would be held in memory. I started the restore operation again and went to sleep.
Needless to say, the same thing happened again. The only way I was finally able to perform the restore was by sitting next to the machine and moving the mouse every few minutes to keep the system awake. This process took a little over two and a half hours (which is not bad considering the amount of data involved). The operation was successful, and I was able to boot from the restored drive. Everything is now back to normal. However, I am puzzled by the apparent necessity to babysit the Mac while it is restoring from a Time Machine backup.
This clearly did NOT happen with the Leopard (10.5) DVD. I suspect (but don't know for sure) that the 10.5 DVD's system included a never sleep setting that Apple forgot to include on the 10.6 DVD.
Is anybody able to perform lengthy restores by booting from the Snow Leopard DVD? If so, how do they get around the sleep issue? Or doesn't it happen in the first place? I would also like to know what state my Mac is in when it stops in the middle of a restore operation; it is clearly not a normal sleep mode since I haven't actually found any way of waking it up.
Finally, I would love to be able to boot from my Bay 3 drive and launch a system restore operation from there since both the Time Machine drive and the target drive would be available. Is there any way at all that this can be done? Has anyone succeeded in using the Time Machine full restore from any location other than the OS DVD? This would obviously be interesting since one could continue to use the Mac while the restore operation is ongoing.
Thanks for any info anyone can provide.
Daniel

something is wrong with your system. changing energy saver settings while booted normally from an external should have taken care of this issue. I suggest you reset SMC
http://support.apple.com/kb/HT3964
and you are right, using "pmset sleep 0" from terminal while booted from the DVD does not work. I think it was me who recommended that. that was very dumb of me. thanks for pointing that out. but it should not be necessary as i mentioned.
all that said, in response to your last question yes it is perfectly possible to run the installer and the restore utility while booted normally from another drive. beeing quite impatient (and having a mac pro with several internal bays ) this is the only way I ever install or restore. also, I don't use the DVD itself. I made a small partition on one of my internals and cloned the SL install DVD to that. it works much quicker from there.
anyway, to start the installer while booted normally from another drive run the following terminal command
sudo /Volumes/Mac OS X Install DVD/System/Installation/CDIS/Mac OS X Installer.app/Contents/MacOS/Mac OS X Installer
this will let you use the mac and do other things while the restore is going on.

How do I Restore my iPhoto library from my time machine if it does not give me the restore option?

How do I Restore my iPhoto library from my time machine if it does not give me the restore option?
When I go into my backups and click on the iPhoto library it does not come up with an option to restore it just says open and of course then won't let me open it because it is a back up in time machine? I need these photo very important.

Mac Basics: Time Machine backs up your Mac - Apple Support
For detailes TM support post in the forum for your OS rather than the iphoto forum
LN

Time Machine won't restore a critical backup - disk space not sufficient error

Using Time Machine Restore Backup says my Macintosh HD has 55 GB available. I need to restore a 50GB Time Machine Backup from an external disk to the Macintosh HD device as the transfer destination of the restore copy it it gives me a message 'This Disk does not have enough space to restore your system'. In fact trying to restore all my many time backups over the past months give the same error even though the backup size is less then my Macintosh HD destination.
So I used the Time Machine software to delete many of my documents in the backup that I want to restore, now it is 30 GB through the Time machine finder, but restoring still gives me the same error. However, time machine made a new backup of my system today of 30 GB but when I go through the backup process using this, there is no error about there not being enough space.
It seems although the finder in Time Machine recognises that file is just 30 GB, in the restore process it doesn't recognise that file has been reduced to 30GB

If you're trying to add a large amount of data all at once, and you get an alert of insufficient space, then from the menu bar, select
 ▹ System Preferences... ▹ Time Machine
If the padlock icon is closed, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON and close the preference pane. Restart the computer. Test.

TS3423 Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not s

Mac book pro stops responding after Maverick OS restart. Currently have a circle with a line through it after 20+ hours. Tried to shut it down and use the Time Machine to restore but no response. How can I restore with Time Machine if it will not start?

sonjadg,
you can purchase a replacement pair of grey installation DVDs for your MacBook Pro from either Apple or iFixit. If Startup Manager is only showing an OS X Installer volume, then it sounds like the Mavericks installer had a problem midway through its installation process. To fix this, you’re going to need to erase your internal disk and reïnstall your original version of OS X from the grey Mac OS X Install DVD, use Software Update to get it back to 10.6.8 (presuming that your MacBook Pro originally came with Snow Leopard), and then restore from Time Machine.

I need to restore my music via time machine but it will not as my mac mini says I don't have permission access iTunes. Any help would be great. Thanks

I need to restore my music via time machine but it will not as my mac mini says I don't have permission access iTunes. Any help would be great. Thanks

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Difference in Time Machine full restore instructions

My daughter had to replace a hard drive. She called Apple for help in a Time Machine full restore and was told to first install OSX from her DVD on the new hard drive and then do a Time Machine restore from the latest backup. It seems to me the last time we did a full restore with a new hard drive, we just formatted the new drive and then booted from the Time Machine option on the OSX disk and them did a full restore from the latest Time Machine backup. That restore restored OSX and everything that was backed up. Since these two methods are different, do you still get to the same restore point with either method?

There are two approaches depending upon what you backup. If you do a full backup of all system files then boot from the OS X installer disc, use Disk Utility to erase the drive, then opt to do a full restore from a TM backup drive. If you don't backup all system files then follow the procedure recommended by AppleCare.
For more please read the three User Contributed Tips you will find at the top of this forum's topic list. Also select Mac Help from the Finder's Help menu and search for "time machine." This will bring up numerous help articles on using TM.
Message was edited by: Kappy

Just did a system restore from my time machine and I can not find any of my files from my desktop. How can I find them?

I am a new apple user...sorry it took so long. I did a recovery from my time machine but I can not find any of the filesI was saving on my desktop. Are they gone for good or is there some way I can get them back? I am desperate...should I save my regular used files somewhere else other than my desktop?
Can I get the old desktop files back????

When you open TM you should see all of the desktop items right away. If they are not there, go back a day before you made your last retrieval. (Look for the dates on the time line on the right hand side of the display)
Ciao.

Time Machine Full HDD Restore not recognizing Login Password

Similar Messages

Maybe you are looking for