Time Machine, has it changed, if so why ?

Hi all, i have as of yesterday upgraded to Mountain Lion from Lion.
When i previously used Time Machine with Lion i used two seperate external Disc Drives at different times and not very regular either, LOL, and Time Machine seemed to cope very well, allowing me to select which disc i wanted each time.
NOW when i used Time Machine with Mountain Lion it confused me to ****, by asking which of the two Drives i wanted to use, if i wanted to use BOTH i had to use each alternately, anyway i selected to use just the one.
So has Mountain Lion completely changed the way Time Machine works, and will i, at a later date be able to use two seperate disc drives again. I didnt fully understand what TM was telling me to do !.
Tim

I would refer you to the expert here:
http://pondini.org/OSX/Home.html
Hope this helps

Similar Messages

Time Machine has stopped making backups

Time Machine has worked fine for me fore many months, the backup disk being a 1 TB external firewire drive.
But now Time Machine will not make a backup. I keep getting the same error message: "Time Machine Error. This backup is too large for the backup volume. The backup requires 88.7 GB but only 58.5 are available."
I thought Time Machine just deleted the oldest files on the drive to make the room it needs for continued backups. So why isn't it doing that now? How do I get it to go back to doing that?
Thanks for any help!
Tom

Tom Baker1 wrote:
My Time Machine backup disk is an external 1 TB firewire drive with only one partition, dedicated entirely to TM, and it backs up the two internal drives in my G5. One of these two internal drives has about 600 GB of data on it and the other about 400, so together they would be enough to fill the external Time Machine backup drive.
Yes, that's too small. Our "rule of thumb" is, TM needs 2-3 times the space of the data it's backing up. See #1 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
Now I have discovered that there is something wrong with the Time Machine backups as well. I decided to go into TM to see just how far back in time the backups go, but it will only allow me to go back as far as yesterday. It acts as though there are no backups older than yesterday afternoon.
That's probably correct; your TM disk is too small, and there's just not room for more. Here's the situation: A full backup has nearly filled the disk; something fairly large has been added or changed, and there just isn't room for it, in addition to the full backup.
The 88.7 GB it's requesting means it's trying to back up about 74 GB (it adds 20% for workspace, etc., on the TM disk).
This is getting stranger all the time. At this point should I just give up trying to fix the situation, erase the backup drive, and start all over again?
That probably won't help much, if at all. To confirm what's going on, Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the last backup attempt, then copy and post all the messages for that run here.
You need to do one of the following:
Get a larger drive, at least 2 TB.
Get an additional drive; use one for TM backups of one of your internal HDs, the other for a different app to back-up the other internal HD.
Exclude a lot of stuff from Time Machine (at least 300 GB).
Use a different app, such as CarbonCopyCloner or SuperDuper, to back up your internals to separate partitions on the 1 TB drive. These will be exact copies only; no previous copies of things you've changed or deleted.

Time Machine: Backup folder changing size when connected to different computers

Can someone please help me wrap my head around why the size of my Time Machine backup folder changes when connected to different computers? I tried to be as thorough as possible. Thanks in advance for taking the time to read this.
I made a backup of my one laptop (MacBook Pro running 10.6.8) before installing Mavericks. The backup folder size is 258.56 GB and it is on a 1TB WD external. There are no other computers backed up in this folder.
Last night, I tried to copy the backup folder to another 1TB WD external and ran into the “you can’t do that” message. After some researching, I came across articles explaining how Time Machine handles HDs and, in order for me to copy my backup folder, the drive I want to copy the folder to needs to have the “Ignore ownership on this volume” deselected.
Okay, so here is my situation: I have the “Ignore ownership on this volume” deselected and journaling is correct on the drive I want to copy the backup folder to. So I can continue working on my laptop, I want to use a different computer to copy the backup folder from one HD to the other. The problem I’m having is each computer I own is showing me a different backup folder size O.o.
(1) The computer I want to use – a Power Mac G5 Quad running 10.4.11 (non intel) – is showing a backup folder size of 592.7 MB, but the HD shows there is 258 GB being used. When I drag copy, I only get a 592.7 MB backup folder. For some reason, the backup folder is the only folder acting this way. I compared other folders from the same and different externals and all the sizes match up perfectly no matter the computer they were connected to. How is this possible?
(2) My second option - Mac Pro (early 2009) running 10.9.4 – is showing a 256.15 GB backup folder size. Very close, but not 258.56 GB.
(3) My last option is to use the computer I’m trying to stay away from, the MacBook Pro running 10.6.8. This is the computer I backed up and is showing me the correct folder size = 258.56GB. As I mentioned, I'd like to work on my laptop while copying the backup folder using one of my other computers.
I am able to drag and drop from each computer, but the folder size depends on the computer I’m using. I don’t understand why I can't do a simple drag and drop of a 258 GB folder.
Many thanks!!

The directory files that you are seeing are not real. They are links to the actual backup files that are stored in a hidden directory on the drive. If you were to look at the same drive on a pc, you would see the folders and you would a list files that are in the folders but the files would all be 0 byte files and Windows will tell you the file is empty because there is nothing there but a link which Windows does not understand.
So the point is you can't just copy the backupd files. The best solution that I know of (and maybe someone else will chime in) for copying them is to mirror the drive with something like Carbon Copy or some other program.
See this site for more information about time machine and how it works: http://pondini.org/OSX/Home.html

Time machine has stopped backing up to my Western Digital Network Drive

I have a WD 1TB World Edition drive which pretty much worked plug 'n' play when I bought it in early Jan backing up with with Time Machine instead of the bundled software. I've had a few troubles backing up, but largely due to router problems. Time machine has worked great with the drive, as promised.
Until a few days ago, when it stopped backing up altogether. The usual backup icon stopped appearing on the desktop and it came up with error message saying the backup file cannot mount or something like that. Strangely, the shared folders on the drive still show up and I can access all the mp3 files, etc I have loaded up. So, I checked the router, cabling to the drive, rebooted the drive, resetted the drive and checked the settings using MyBookWorld. This stopped the error message showing when I tried to backup and the backup icon now shows on the desktop again. But it won't backup !!! It just stalls and in Time Machine says its configuring without doing anything. I have tried hooking up to the drive directly, still no joy.
I'm now at the end of my tether. Does anyone have any ideas? I have asked WD support and they were next to useless. Thanks !

Hi, and welcome to the forums.
Time Machine does not back up reliably, if at all, to most network drives, except Time Capsules or a shared drive on another Mac running Leopard or Snow Leopard on the same local network.
Here's the criteria they must meet: Disks that can be used with Time Machine. And be careful here: just because some 3rd-party hardware claims to support Time Machine doesn't necessarily mean that Apple supports it, or that it will work in all circumstances.
We've seen a number of problems reported with that drive. Have you downloaded the firmware update that's supposed to make it work?
with error message saying the backup file cannot mount or something like that.
The exact message might help.
Time Machine says its configuring
Is the word "configuring" or is it "Calculating changes"? "Configuring" sounds more like a message from WD, or perhaps your router, than one coming from Time Machine.
Click here to download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to the backup in question, then copy and post all the messages for that run here.
You might also try to Repair the backups. I don't know exactly how you'd get to them on a NAS, but try the procedure for a Time Capsule in #A5 of the Time Machine - Troubleshooting *User Tip,* also at the top of this forum.

Time Machine has locked my external drive. HELP

Time Machine hosed me again. After several unsuccessful attempts to backup on my PowerMac G5 dual 2.33 Ghz, I was able to complete my first full backup to an external 2 gig DROBO (USB 2.0 interface). It took 20 hours to do 180 gigs.
Now I have just discovered that Time Machine has made that external drive READ-ONLY! I cannot write to the drive and neither can Time Machine.
Does anybody know what is up and how to fix this short of using root UNIX shell which terrifies me. I just want to take it off and cut my losses, but the drive also has a ton of music on it that iTunes uses.

Okay Jeffery, I think I've found the solution, especially if you are seeing the "Unknown" user in your Get Info window's Sharing & Permissions setting for your drobo.
I had written earlier about my work-around for getting my drobo to work right after getting the "read-only" error from Time Machine. But unfortunately it was a temporary and temperamental fix. There were times then I had to eject the disk and launch Disk Utility to run a repair on the disk which would take more than half an hour on my drobo. But all the while my permissions had this "Unknown" user. Well I decided to "Go UNIX" and see if I could fix this problem once and for all.
I opened up Terminal and typed "*ls -la /Volumes*". This gives me a directory listing of my mounted drive volumes. I noticed that all of my drives, internal, external, USB and FireWire, all had "root" as the user and "admin" as the group, _EXCEPT for my drobo!_ So I forced it to conform by changing it manually by typing "*sudo chown root:admin /Volumes/Drobo\ Backup\ HD/*".
sudo = temporarily enables root mode by asking for your password before executing.
chown = changes ownership to...
root:admin = "root" is the user and "admin" is the group.
*/Volumes/Drobo\ Backup\ HD/* = My drobo drive is named "*Drobo Backup HD*", but UNIX sees spaces as command separators, so you have to use the "\ " to signify spaces within a name.
After doing this over a week ago, _I have not had any other problems_ with using my drobo as a backup drive. It has never come up with the "read-only" error in Time Machine, the Sharing & Permissions setting do not have any "Unknown" users or groups, I don't even need to wait for my drobo before logging in like I did in the past. I just boot my Mac and everything with my drobo and Time Machine just works... No problems!
It seems to be permanently fixed for me, so if you are willing to try this solution, I'm sure it would work for you. If UNIX terrifies you too much, and you do not trust yourself editing the commands above, let me know the name of your drobo drive on your desktop and I will post a message with the EXACT UNIX commands customized for just for you, so all you have to do is copy and paste them into your Terminal window to do it. But like I said, I've done this over a week ago and I not had one single problem.

Time Machine has never worked

OS 10.7.5
iMac
Backing up to Toshiba 1.5 TB Trive
Time Machine has only backed up a full back up and will not backup regularly. I have searched everywhere. Apple used to make things that just work. This does not "just work". Here's the error I get:
"Unable to complete backup. An error occurred while creating the backup folder."
Any info would be appreciated!
thanks

Forget TimeMachine and consider using bootable clones.
1: New external powered drive
2: Use Disk Utility to Erase with Zero Security option (move slider one spot over) and click Erase, this will map of potential bad sectors.
3: Set Partition: 1, Option GUID, Format: OS X Ext J and give it a name like MacintoshHD
4: Download and install Carbon Copy Cloner, clone the OS X boot drive to the external drive and that's it.
5: Hold option/alt key on a wired or built in keyboard while booting and select the clone to boot from.
6: CCC will save the saved changes when you update the clone, however you can select the option to maintain a pure clone also.
Most commonly used backup methods

I use Time Machine with an external hard disc which has worked perfectly for some years. Recently Time Machine has aborted backups if the screen saver starts when back-up is in progress. I use a Maxtor OneTouch4 back-up system. Any ideas?

I use Time Machine with an external hard disc which has worked perfectly for some years. Recently Time Machine has aborted backups if the screen saver starts when back-up is in progress. I use a Maxtor OneTouch4 back-up system. Any ideas?
Has Apple recently up-dated my OS (Lion) such that every time the screen saver starts it disables Time Machine. I have to switch-off the computer and re-start in order to undertake a back-up. I have now switched of all screen savers.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Time Machine has simply stopped backing up any new files. No items set to be excluded, No error messages.

I have a Macbook with OS X 10.6.8 and a 500GB external hard drive, which still has 208.5GB available. For some reason, Time Machine has simply stopped backing up any new files (documents, music, movies--anything). No items are set to be excluded from backups in Time Machine options except for the external hard drive itself. Also, no error messages appear, Time Machine seems to run just fine, but when I enter Time Machine, or look through the files on the hard drive, new files just aren't there. I am not very tech savvy, so I was not able to understand some of the answers people gave to similar questions on here. I did go to Pondini's website and followed as many troubleshooting instructions as I could understand (for example I did manage to do a full reset of Time Machine) but nothing changed. Do I just need to erase the entire backup drive and sart all over? If so, what will prevent this from happening again later on? Please help.

Your TM drive liekly stopped backing up because it hit a series of bad sectors on the drive, to eliminate this all new drives should be Disk Utility > Zero Erased (one step below 7x in Lion) before use.
Reducing bad sectors effect on hard drives
Diversify your backups with bootable clones and archives on DVD's etc so your prepared for anything, including using a PC.
only if you have too of course, but it happens, people just can't afford a Mac anymore.
Most commonly used backup methods explained
So make other backups, then Zero Erase teh TM drive and set it back up again and your problem should be resolved.
If not, then it's data corruption on your boot drive!
You'll know if it's data corruption on your boot drive, when you go to make the clone, it will hang too.

Time Machine has lost all backups

I have a time capsule that was reset on 15th April when I moved the home folder on our iMac to an external disk. It needed to be reset as there was not enough free space to keep the existing backups and continue with the new external. Time machine has been running since and backing up our files.
Today I noticed that Time Machine was working hard doing a backup and when I check the status in the top bar it shows that time machine is backing up all or our data (approx 250Gb). I opened the time machine application and it only shows a backup from today - there is no history.
What could have happened? It looks like the time capsule was wiped and time machine has started from scratch again. One other thing, I updated to the latest AirPort utility this morning, coincidence?
Hope someone can help as I do not want this to happen again.
All the best
Andrew Wright.

Thanks for the link, but the answers there did not really help explain why a full backup was done. None of the reasons in D3 were applicable. I did look at the system log and found the info below. This appears to show a 'normal' backup just before 2pm then the full backup just after 3pm. The question is still 'why would time machine want to backup everything when most files were already backed up'?
Jun 17 13:55:24 iMac-2 com.apple.backupd[746]: Starting standard backup
Jun 17 13:55:24 iMac-2 com.apple.backupd[746]: Attempting to mount network destination using URL: afp://[email protected]/Time%20Capsule
Jun 17 13:55:33 iMac-2 com.apple.backupd[746]: Mounted network destination using URL: afp://[email protected]/Time%20Capsule
Jun 17 13:55:37 iMac-2 com.apple.backupd[746]: QUICKCHECK ONLY; FILESYSTEM CLEAN
Jun 17 13:55:40 iMac-2 com.apple.backupd[746]: Disk image /Volumes/Time Capsule/MyMac.sparsebundle mounted at: /Volumes/Time Machine Backups
Jun 17 13:55:40 iMac-2 com.apple.backupd[746]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Jun 17 13:56:02 iMac-2 com.apple.backupd[746]: No pre-backup thinning needed: 841.0 MB requested (including padding), 149.65 GB available
Jun 17 13:57:28 iMac-2 com.apple.backupd[746]: Copied 1601 files (183.8 MB) from volume Macintosh HD.
Jun 17 13:57:28 iMac-2 com.apple.backupd[746]: No pre-backup thinning needed: 592.4 MB requested (including padding), 149.65 GB available
Jun 17 13:57:31 iMac-2 com.apple.backupd[746]: Copied 7 files (93 bytes) from volume Macintosh HD.
Jun 17 13:57:32 iMac-2 com.apple.backupd[746]: Starting post-backup thinning
Jun 17 13:58:02 iMac-2 com.apple.backupd[746]: Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/MyMac/2011-05-18-162329: 149.65 GB now available
Jun 17 13:58:02 iMac-2 com.apple.backupd[746]: Post-back up thinning complete: 1 expired backups removed
Jun 17 13:58:02 iMac-2 com.apple.backupd[746]: Backup completed successfully.
Jun 17 13:58:06 iMac-2 com.apple.backupd[746]: Ejected Time Machine disk image.
Jun 17 13:58:06 iMac-2 com.apple.backupd[746]: Ejected Time Machine network volume.
Jun 17 15:16:12 iMac-2 com.apple.backupd[425]: Starting standard backup
Jun 17 15:16:12 iMac-2 com.apple.backupd[425]: Attempting to mount network destination using URL: afp://[email protected]/Time%20Capsule
Jun 17 15:16:21 iMac-2 com.apple.backupd[425]: Mounted network destination using URL: afp://[email protected]/Time%20Capsule
Jun 17 15:16:23 iMac-2 com.apple.backupd[425]: QUICKCHECK ONLY; FILESYSTEM CLEAN
Jun 17 15:16:26 iMac-2 com.apple.backupd[425]: Disk image /Volumes/Time Capsule/MyMac.sparsebundle mounted at: /Volumes/Time Machine Backups
Jun 17 15:16:26 iMac-2 com.apple.backupd[425]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Jun 17 15:16:40 iMac-2 com.apple.backupd[425]: Node requires deep traversal:/Volumes/Users reason:must scan subdirs|
Jun 17 15:17:17 iMac-2 com.apple.backupd[425]: Compacting storage: 297.87 GB requested (including padding), 149.65 GB available before compacting
Jun 17 15:17:17 iMac-2 com.apple.backupd[425]: Stopping backup.
Jun 17 15:17:18 iMac-2 com.apple.backupd[425]: Backup canceled.
Jun 17 15:17:19 iMac-2 com.apple.backupd[425]: Ejected Time Machine disk image.
Jun 17 15:17:19 iMac-2 com.apple.backupd[425]: Compacting backup disk image to recover free space
Jun 17 15:18:11 iMac-2 com.apple.backupd[425]: Completed backup disk image compaction

After upgrading to 10.7.2 Time Machine has failed

Hi everybody,
After upgrading to Lion 10.7.2 Time Machine has failed and won't mount the Time Machine drive.
I use a WD My Book Studio LX for my Time machine and also have a smaller WD My Book daisy chained through it in to the iMac with 2 partitions.
Both of the partitions on the My Book are loading fine and the Studio LX Drive is on and functioning ... the light is blinking away like a good'un ... but the drive won't mount on to the Desktop.
Has anyone else experienced this or have any possible solutions for it?
Thanks
Simon

I znever realized that you need to add firmware updates, since Apple sells this but doesn't provide any instruction or information on use. I had my WD external since about May and just looked into adding necessary firmware. This was my second drive and was not aware of this necessary upgrade. If failed to recognize my drive so I contacted Westen Digital and after a series of emails they said sorry but Lion is not supported! I was dumbfounded and in disbelief. They tried to
Get me to upgrade to another model but didn't tell me about any cost. I called the Apple store where I purchased it and talked to. Manager who brought on the phone a genius. He told me he has one and it does work with Lion! He walked me through adding the firmware and there you go Apple knew more than the Tech support at WD! I am hoping someone at Apple will read this and contact WD management and tech support to get their act together.
Regards,
Barry

HT3275 My Time Machine has stopped backing up and now it errors out everytime I make another attempt.

My Time Machine has stopped working and now errors out everytime I try to re-connect ?

What is the error.. ??
We cannot help much without details.
Look at the pondini troubleshooting.
http://pondini.org/TM/Troubleshooting.html
The vast majority of issues are C12 or C17.. especially with ML.. which rather than fixing issues left over from Lion exacerbated them.

Time Machine has left me in the past!

I recently had a mac genius re-install my OS due to poor performance and too many glitches to name them all. I was confident in my time machine back-ups since I could see the clock moving everyday on my tool bar. After my OS was re-installed, I connected to my external hard drive and can only see files from November. Nothing else. Am I just ******** or is there something I'm doing wrong? I have only had a few hiccups in my 10+ years using a mac but they have been huge ones. Does anyone out there have a solution to this or has it happened to anyone else? Time machine has left me in the past, November 07 to be exact and I need to be in May 08! Someone please help!!!!

Double-click the drive icon, then double click the "Backups.backupdb" folder. Double-click your old computer's name, and scroll down to the bottom, and look at the most recent date. That most recent date is the most recent TM has.
Good luck!
P.S. Welcome to Discussions!

My Time machine has stopped backing up saying there are some read only files.

My Time machine has stopped backing up and says that ther are some read only files preventing this. What steps do I need to take to fix it?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Post the messages timestamped from then until the end of the backup, or the end of the log if that's not clear.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into a message.
Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.

Time machine has created a new sparse bundle

I have booted my new Macbook from my time machine back up. Time machine has created a new sparse bundle and I cannot access the previous backups. Is there any way to make time machine to use the previous sparse bundle? Thanks, Karl

Use the old backups to continue backups or use them for migration etc..
If you have a new Mac then continuing to use the same backup is not recommended..
Info you can see here..
B5 and B6 http://pondini.org/TM/Troubleshooting.html
I do not think it is good idea.. however you can access the old backup to get files if you need them.
See Q17 here.
http://pondini.org/TM/FAQ.html

Time machine has deleted/hidden *all* my backups.

At the moment I'm using two 1TB external hard drives connected to my mac, one as storage and one just for time machine. Yesterday the storage drive died on me, so I replaced it with another 1TB drive.
Time machine has been backing up everything on the main computer and the storage drive for several months now so I thought it would be an easy fix, just restore what was lost from the storage drive and I'm set.
After connecting and formatting the new external hard drive I tried restoring the lost data but couldn't figure out a way to have it restore from time machine directly to the new drive. Instead, I went into the Backups.backupdb folder on the time machine drive, found the most recent backup of the files I needed from Feb 9th and just dragged and dropped it into the new drive.
It comprised of some 550GB of data, so I left it copying overnight. Checking on it this morning, it seems that a little less than half of the data has been copied across and what's worse - time machine no longer shows any backups made before this morning. Checking in the drive contents, it seems that the backup folders no longer exist either.
Now, I don't actually think the data has gone missing since the time machine drive is still showing that it has some 700GB of data still on it, it's just not viewable for some reason.
I've been through Disk Utility to see if the drive needs repairing, but I'm being told that there's no problem with it. I've also checked to see if the data has somehow found its way into the trash can, but it's not there either.
Does anyone have any suggestions as to what happened and how to recover my lost backups?

pheadlessg wrote:
Thanks for that. It's backing up again now but the old backups are still missing.
I have no idea what went wrong with the drag and drop. It should have copied your data (likely with a zillion permission problems), but shouldn't have affected the TM data. There might be something in your logs, but that probably won't help now.
Your old backups are probably hosed (pardon the technical term <grin>).
You might be able to give yourself read rights to the .Trashes folder, and see if there's anything in it, but I doubt you'll see anything.
To do so, select it, then +Get Info.+
Click the padlock at the bottom of the pane, then enter your Administrator's password.
Then click the plus sign at the bottom; you should get a selection screen for yourself. Click it.
That should give you read rights.
A very long shot, but worth a try.
Most likely, you're going to end up erasing the drive/partition and starting over.

Time Machine, has it changed, if so why ?

Similar Messages

Maybe you are looking for