Time Machine has not worked since upgrade to Lion

Hello,
I've noticed that my Mac Mini's Time Machine will no longer perform a backup - I keep receiving a "could not create the backup folder" error message. This problem only started after I upgraded my Mac Mini (2010 Model) to Lion, Time Machine had worked perfectly when I use to use Snow Leopard. I have both formatted and partitioned my Time Machine drives (the first drive was a Seagate Barracuda 7,200 RPM 1TB drive, the 2nd drive is a 2TB Porsche Drive I bought at my local Apple Store). Both drives, when I was partitioning them, were set to use the GUID Partition Scheme. The Seagate Drive is an Internal Hard Drive that is sitting in a ThermalTake 2-Bay Drive Dock which is connected by a USB Cord, the Porsche drive is an External Drive that is connected via a USB cord. I have also tried unmounting/remounting each drive, deleting the Time Machine "plist" file from my Library folder and restarting, and finally re-installing Lion from the recovery drive I made using the instructions on support.apple.com. Unfortunately, nothing I've done so far has solved the issue.
I checked my Console log for Time Machine and this is what I found:
Initial Time Machine Backup
9/16/11 1:24:03.918 AM com.apple.backupd: Backing up to: /Volumes/Backup/Backups.backupdb
9/16/11 1:24:07.255 AM postfix/master: master exit time has arrived
9/16/11 1:24:07.277 AM postfix/master: daemon started -- version 2.8.3, configuration /etc/postfix
9/16/11 1:24:07.000 AM kernel: nstat_lookup_entry failed: 2
9/16/11 1:24:13.344 AM com.apple.backupd: 571.1 MB required (including padding), 1.70 TB available
9/16/11 1:24:19.677 AM com.apple.backupd: Copied 1601 files (10.3 MB) from volume Macintosh HD.
9/16/11 1:24:19.765 AM com.apple.backupd: 558.7 MB required (including padding), 1.70 TB available
9/16/11 1:24:20.346 AM com.apple.backupd: Copied 100 files (93 bytes) from volume Macintosh HD.
9/16/11 1:24:20.413 AM mds: (Error) Volume: Could not find requested backup type:2 for volume
9/16/11 1:24:20.427 AM com.apple.backupd: Starting post-backup thinning
9/16/11 1:24:20.427 AM com.apple.backupd: No post-back up thinning needed: no expired backups exist
9/16/11 1:24:20.442 AM com.apple.backupd: Backup completed successfully.
Second Backup (1 Hour Later)
9/16/11 2:24:05.102 AM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Backup/Backups.backupdb/Abraham size:37
9/16/11 2:24:08.685 AM postfix/master: master exit time has arrived
9/16/11 2:24:08.726 AM postfix/master: daemon started -- version 2.8.3, configuration /etc/postfix
9/16/11 2:24:09.000 AM kernel: nstat_lookup_entry failed: 2
9/16/11 2:24:15.143 AM com.apple.backupd: Backup failed with error: 2
Being a relatively new Mac User (I only knew about the above "fixes" after doing several Google Searches) I have no idea what the Console Log is trying to tell me or how to fix whatever is being referred to. I will be very grateful for any assistance that can be offerred.

I installed, and ran, the Time Machine Buddy Widgit and it displayed this message:
Starting standard backup
Backing up to: /Volumes/Backup/Backups.backupdb
Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Backup/Backups.backupdb/Abraham size:37
Backup failed with error: 2

Similar Messages

  • Please Help! Keychain has not worked since upgrading to lion

    Please help...I need Keychain access to work asap.  Here is the error message that I'm getting:
    Process:         launchd [8657]
    Path:            /Applications/Utilities/Keychain Access.app/Contents/MacOS/Keychain Access
    Identifier:      com.apple.keychainaccess
    Version:         ??? (???)
    Build Info:      KeychainAccess-55121004000000000~155
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [137]
    Date/Time:       2013-01-30 10:02:19.284 -0500
    OS Version:      Mac OS X 10.7.5 (11G63)
    Report Version:  9
    Interval Since Last Report:          3707422 sec
    Crashes Since Last Report:           65
    Per-App Crashes Since Last Report:   63
    Anonymous UUID:                      561D3F14-17F5-4940-B90F-F7C0AB826F8B
    Crashed Thread:  Unknown
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x00007fff5fc01028
    Backtrace not available
    Unknown thread crashed with X86 Thread State (64-bit):
      rax: 0x0000000000000055  rbx: 0x0000000000000000  rcx: 0x0000000000000000  rdx: 0x0000000000000000
      rdi: 0x0000000000000000  rsi: 0x0000000000000000  rbp: 0x0000000000000000  rsp: 0x0000000000000000
       r8: 0x0000000000000000   r9: 0x0000000000000000  r10: 0x0000000000000000  r11: 0x0000000000000000
      r12: 0x0000000000000000  r13: 0x0000000000000000  r14: 0x0000000000000000  r15: 0x0000000000000000
      rip: 0x00007fff5fc01028  rfl: 0x0000000000010203  cr2: 0x00007fff5fc01028
    Logical CPU: 0
    Binary images description not available
    External Modification Summary:
      Calls made by other processes targeting this process:
        task_for_pid: 1
        thread_create: 0
        thread_set_state: 0
      Calls made by this process:
        task_for_pid: 0
        thread_create: 0
        thread_set_state: 0
      Calls made by all processes on this machine:
        task_for_pid: 3863
        thread_create: 0
        thread_set_state: 0
    Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB, SMC 1.31f1
    Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz, 0xAD00000000000000, 0x48594D503131325336344350362D59352020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.15)
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 2 incoming serial ports
    Network Service: Ethernet Adaptor (en2) 6, Ethernet, en2
    Network Service: Wi-Fi 2, AirPort, en1
    Serial ATA Device: Hitachi HTS545025B9SA02, 250.06 GB
    Parallel ATA Device: HL-DT-ST DVDRW  GSA-S10N
    USB Device: iPhone, apple_vendor_id, 0x12a0, 0xfa200000 / 2
    USB Device: FreeAgent GoFlex, 0x0bc2  (Seagate LLC), 0x5031, 0xfd100000 / 3
    USB Device: Built-in iSight, apple_vendor_id, 0x8501, 0xfd400000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8205, 0x1a100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0229, 0x5d200000 / 3

    I installed, and ran, the Time Machine Buddy Widgit and it displayed this message:
    Starting standard backup
    Backing up to: /Volumes/Backup/Backups.backupdb
    Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Backup/Backups.backupdb/Abraham size:37
    Backup failed with error: 2

  • Time machine will not work after upgrade

    Since I upgraded to Mavericks on Oct. 22, Time Machine will not run properly, or at all for that matter.  It tells me that it is 'Preparing Backup', but it was said that for over 4 days now.  Suggestions?

    I had a strange issue with Time Machine and Mavericks. Time machine wouldn't recognise the external USB drive I was using for backups. There was nothing in the logs, no errors, the time for the backup would come along and then it would skip to the next hour with no backup being done. What I was doing was removing the drive from Time Machine Preferences and re-adding it, TM would then start a manual backup and from that point it would run fine.
    I ended up doing a Disc Verify on the drive (all ok, no issues) and shut the machine down. Today I booted up and staright away the TM Icon for the drive is correct and the TM is running as it used to.
    I have three macs, all with external USB drives, the other two macs have no issues with TM, only my main one. Having a look at other issues, my external drive is a Western Digital unit so maybe that has something to do with it, though it can see the drive fine from Finder.
    Anyway, if you are having similar issues, just run the Disc Verify Utility (and repair if there are errors) and hopefully it'll fix up that particular issue.

  • Time Machine backups have not worked since upgrade to Lion OS X

    I get the following error message when trying to use Time Machine - "The backup was not performed because an error occurred whilecopying files to the backup disk.  The problem may be temporary. Try again later to back up. Ifthe problem persists, use Disk Utility to repair your backup disk."

    Not one of Apple's better messages. 
    It's having a problem with a particular file, but there's no hint of that. 
    See #C3 in Time Machine - Troubleshooting.

  • Threaded Email NOT working since upgrading to Lion

    Threaded emails were working fine until I upgraded to Lion.  I have even done a fresh reinstall, enabled classic view, organize by conversation, and adjusted the view setting in the preferneces to include related messages.
    While my replies are grouped together, the other persons are group on their own and NOT bundled with mine.  I am using IMAP, NO Rules in place on the server OR on Mail.app.
    Any suggestions?
    Thanks,
    Shelby

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

  • I'm using a WD NAS as my time machine backup drive and since upgrading to Lion the time machine won't operate with the drive. How am I to retrieve my photos and documents from it?

    I realise it is the responsibility of WD to maintain the network storage interface for time machine. What is a solution for retrieving files from time machine?
    When trying to re-add the drive a message said the version of the system is not supported.

    Please follow these instructions:
    Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
    https://discussions.apple.com/thread/3258472

  • My time capsule has stopped working since installing Yosemite. It says to wait to tell me how much longer but it stays that way for hours.

    My time machine has stopped working since I upgraded to Yosemite. It gets to the point that says it will estimate the time remaining, but it never gives me that answer and it just stays on that page and never completes it's backup. This is a brand new macpro, so I wanted to capture the previous info on my computer I was able to put my external hard drive on new computer and it did the migration and all my old info returned. However, two days later I wanted to do a backup using Time Machine with my Western Digital Mac external hard drive but it won't progress past saying how much time remaining, even after several hours of sitting there.

    You do need to wait a long time.. as it takes a long while for Yosemite to index the existing backup if it is large.
    Here is Apple's List of bad things that happen to TM in Yosemite.
    OS X Yosemite: Time Machine problems
    It is clearly no where near as comprehensive as it needs to be.
    I presume your disk has your old backup.. it may be better to keep the old backup.. save that for the future.. and get a new disk and start a fresh clean backup.
    I would also recommend using Carbon Copy Cloner or similar for the time being. Make a bootable clone backup of your drive to a new external drive.. it is really superior in lots of ways to Time Machine. And does show you what it is doing.
    For TM at least you can still use the widget so you have some log access to that TM does.
    A1 here. http://pondini.org/TM/Troubleshooting.html

  • Time Machine Not Working Since Upgrade to Mountain Lion

    Hi All,
    Just upgraded a couple days ago from Lion to Mountain Lion...
    Since the uprgrade Time Machine has not been able to run a back up. When I select "Back Up Now" I get the "Looking for Backup Disk" message for several minutes after which I get the following error message:
    Time Machine couldn’t complete the backup to “The Hive”.
    The backup disk image “/Volumes/Data/Keith  Malarick’s MacBook (2).sparsebundle” could not be accessed (error 112).
    Im using a late 2008 Aluminum MacBook and a 2nd Generation Time Capsule. In addition to not being able to run back ups I am unable to access my previous backups through Time Machine .
    Sounds like others are having similar issues as well.
    Any advice would be greatly appreciated.
    Best,
    Keith

    I received the same error and experienced the same issue that you have described but after performing a Time Capsule soft reset and then toggling the TM Off and then back On I was able issue a backup now and see my previous backups.
    Here is the link to where I posted my fix; https://discussions.apple.com/message/19069543#19069543. Someone else had success using a different method. The only comment / complaint that I have since the ML OS X upgrade is that TM now takes at least 20 to 30 seconds before I can click/select a backup.
    I hope this helps.

  • I have a 2013 macpro I upgraded to yosemite.  Now I find time machine does not work, nor my old back up using a click free wireless back up.  What is the status of time machine and yosemite?

    What is the status of time machine not working with yosemite?
    I upgraded mu mac pro to yosemite and since have found time machine does not work.
    Also, my old backup via a clikfree wireless backup does not work any longer.
    Is anyone working on this issue?
    Is there anyway I can backup my information today and until time machine &
    yosemite get fixed?

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
    Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Why is Time machine backup not working after Mavericks upgrade?

    Why is Time machine backup not working after Mavericks upgrade?

    I had the same problem due to the Fire Wire port.  Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device.  I find it strange that as soon as I installed Mavericks.  The drive does work using USB.  It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

  • I cannot conect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to tipe my user name /password and nothing happens afterwards. No error messages either.

    I cannot connect to APP Store. I upgraded to IOS 8.3 and APP Store has not worked since. I am being asked to type my user name /password and nothing happens afterwards. No error messages either.

    hey the sever is down for the moment try again latter tonight... we have been attepting and i eveen went to the apple store third Street Primonade and alejadnro could not help me he said to try soon
    John

  • Time machine was not working.  I bought a new time machine and migrated time machine files to new time capsule; not recognized by yosemite

    Time machine was not working after yosemite upgrade on new and old MacBooks in my house.  I bought a new time machine and migrated time machine files to new time capsule. I changed the names of the older sparse bundles to the default values.  Yosemite still does not recognize them. 

    I presume the bought a time machine means a time capsule.
    How did you migrate the Time Machine files?
    From where? A Time Capsule or external drive?
    It is difficult to get TM working with Yosemite.. since it doesn't work after the upgrade on the old TM backup.. it will not work on the migrated files either.
    You simply start a new backup and store the old backups for a few months until you are ready to dump them.
    The instructions for inheriting old backups is B5 and B6 here.
    http://pondini.org/TM/Troubleshooting.html
    However it is just unlikely to work.. TM in Yosemite is very different. Broken even.
    I also strongly recommend people to use Carbon Copy Cloner or some other 3rd party backup until Apple get the bugs fixed. And after several months.. they are still rampant.

  • My time machine is not working and the disk utilities cant repair it and is asking me to format the drive again. How can I backup the files before formatting the drive so that I don't lose my files?

    Hi
    My time machine hard drive has stopped working after the latest update and the Disk Utilities says,:
    Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
    How can I back up my files before reformatting when I can't even open the drive's folder?
    Thanks for the help.

    I think my time machine is not working correctly and I dont know how to get it back... I really need to get back my photos!!!!!
    Exactly this was the way I USED to make restores of files and photos..
    but know I CANT!!!!
    When I am inside iPhoto y click on the Time Machine icon at the Dock and it goes to this...
    at my right side there are the backups but when i click them nothing happens they are like NOT CLICKABLE...
    PLEASEE!!! Help me!!

  • Time machine is not working. I get a message: You can't open the application "Time Machine" because it may be damaged or incomplete.

    Time machine is not working under "Applications". I get this message: You can’t open the application “Time Machine” because it may be damaged or incomplete. What do I do?
    Time machine under system preferences lets me setup time capsule. But backup fails because "Volume is in use" Help please!

    It does sound like you have a corrupted install.
    The volume in use error is something we see all the time.
    Look at C12 here. http://pondini.org/TM/Troubleshooting.html
    But I suspect you have more serious issue.
    I would run a disk verify on your local OS disk. A5 in the above reference has some info.

  • Time Machine will NOT work with Airport Disks!

    It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
    http://www.apple.com/macosx/features/timemachine.html
    It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
    Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
    I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

    Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
    1) Mount your AirDisk so it appears on your Mac
    2) Open Terminal.app
    3) change directories to the AirDisk's root folder located in "/Volumes"
    ie: cd "/Volumes/AirDisk Name"
    4) execute this command to "bless" the drive to be used with time machine:
    touch .com.apple.timemachine.supported
    5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
    This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
    Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

Maybe you are looking for

  • IPod Video and dock M9868G/A it's possible?

    I wont connect iPod Video 60GB to TV It's possible connect new iPod video to TV using the M9868G/A dock (compatible with all iPod models with color display)or is necessary use the universal dock (MA045)? Thanks a lot, for the answers

  • Opening webhelp in the default browser

    The sample code for calling Webhelp opens Webhelp in IE. Is there a way to call Webhelp from an application that opens it in the user's default browser, whatever that might be? Thanks in advance.

  • Why the process chain always run twice when triggered from R3?

    I run a program from R3 by calling the remote function 'RSSM_EVENT_RAISE' on BW to trigger an event and in turn the event on BW bring up the running of a process chain.  But whenever I run the program on R3 to bring up the running of the process chai

  • .rserv wants to connect to krymbrjasnof

    I recently had Little Snitch block ".rserv wants to connect to cuojshtbohnt.  Moments ago, I blocked another that said ".rserv wants to connect to krymbrjasnof." I searched my Launch Agent and computer for "rserv" but come up with nothing.  Since I h

  • HDMI no sound with Windows 7 upgrade

    I am unable to get sound with HDMI , but visual is working, after upgrading from Vista to Windows 7.  G70 series laptop, s/n 2CE92870KS. Under control panel/device manager/display adapters, what is listed is mobile intel (r) 4 series express chipset