Time Machine in HD Upgrade

I am planning to upgrade my 120G into Scorpio 250G for my MBP17, can TM be used to back up my entire mac and then restore it to the new HD? I have already installed Leopard on my existing drive.
Any ones knowledge and/or experience on the details and how is appreciated.

CCC worked fine with backing up a bootable image of OSX 10.5 to external drive (I used a partitioned Maxtor One Touch 2).
Restoring was also flawless.
So far I had couple of issues (after partitioning the new drive and installing boot camp and xp sp2) not related to Carbon Clone Copy; 1 is I had system crash once when I tried to get many programs going on together to see how far I can stretch it, and 2 is Google Earth not compatible with 10.5 OSX, as fixes are needed.

Similar Messages

How to restore from time machine after HDD upgrade on macbook pro?

Hi,
I have recently bought a WD 2.5 inch SATA 750GB 7200RPM 16GB HDD and plan to use it on my macbook pro 13 inch 2.4ghz early 2011. I will leave the pysical installation part to Apple Service. I have my Time Machine backup on an external hard disk. So, once I get the upgraded macbook, what are the steps I should follow for a complete Time Machine restore? (Including the formatting on the new HDD).
One more question; when I transfer my applications to the new HDD will Time Machine "remember" their activation codes and license information ?
Thanks a lot.

http://web.me.com/pondini/Time_Machine/14.html
This has all the instructions for a complete restore, including how to format the disk. Pondini's site probably has anything else you want to know too.
Good luck!

Can't access Time Machine files since upgrading to Mavericks

I have searched the community and found that people have experienced issues backing up to Time Machine since upgrading to Mavericks, but my problem appears slightly different from the ones I've found. I can see that my Time Machine is actually backing up since the upgrade as it was before the upgrade. The issue I'm having is that I can't access the backed-up files in any way.
When I try to open time machine it launches the "space view" with all of the historical tabs lined up for me to scroll through, but imediately closes that window and gives the error message: "Can't connect to a current Time Machine backup disc". It's so weird, because it says that there have been backups completed since the upgrade (most recently this morning). If it wasn't writing to the disc, it would have showed me an error of some sort.
What I am, specifically, trying to accomplish is that I need to restore some iTunes playlists that I somehow managed to delete this past weekend. I figured that I would easily be able to access the library file that contains the playlists from Saturday morning, when I KNOW that playlist was still there, and just restore it. Now that I am seeing that I can't access any of my time machine files, I'm realizing that I have an even bigger problem, and that all of my files are, essentially, going without backup at this time (assuming I can't access the files that have already been backing up).
If anyone has some insight as to how I can fix this problem, I would greatly appreciate it.

Hi John, (The above was for your attention) I'm 72 and must've hit the wrong button!!!
I followed your instructions to the letter, but sadly, no success...all my backups are showing on the TM external HD, but I cannot access them after instsalling 'Mavericks'
I spent the entire day on and off the phone with Applecare (they are very nice, and I'm sure they know most of the stuff needed; but not this problem. They are phoning back tomorrow as the senior chap was not available.
I love my apple products, and like you, have been using their gear for well over 25 years...not studying the things, but using them all the way through.
My present Mac, a 24" iMac is nearly 7 years old, bought on December 11th 2007, and this is the first time I have had a significant problem, and never a virus..got bless em!. I bet there are not many Windows users around who can say the same!
However, if I cannot access my backups, I'm a bit lost, as all my accumulated stuff is there!
I guess the worst case scenario is that I revert to OS X 10.7.5, and wait 'til the bugs are ironed out in Mavericks....Ho Hum
Message was edited by: briinoz

How can I restore my old iTunes Time Machine backup after upgrading to Mavericks?

I previously had Snow Leopard, and am wondering how I can simply restore ONLY my iTunes library from my Time Machine backup, last made only a few days ago when I had Snow Leopard. However, I seem to be unable to access anything backed up before I installed Mavericks. Any help would be great, because I'd hate to have to struggle to locate 160GB of music manually.
Many thanks!

Your choice really. Either way will work. Retaining the older backups gives you a way to restore older files. When I upgrade from 10.8 to 10.9, the backups continued without errors. Depending on what you upgraded from, in 10.8/9 you have the option to backup to 2 separate drives thus giving you some protection in case one drive fails. You can either copy the old backup to a new drive (Disk Utility/Restore seems to work best) or start a new one.

Can't reconnect to Time Machine backups after upgrade to Yosemite

I did a clean install of Yosemite and restored the user accounts from my time machine backup. I reconnected to the time machine backup on my time capsule and performed a backup. That went fine.
Now I can't access any of the backups made before I upgraded to Yosemite. They all show up in the history bar on the right in time machine but when I click on a backup nothing loads. I've run a verify on the backup and it passes. Looking at the backup file it has 400GB of data, the same as before the upgrade to Yosemite.
Any ideas why I can't access the backups?
Thanks,
Marvin

While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.
If you need to restore from a backup of the hidden user Library folder, first select a snapshot, then press shift-command-G. A Go to Folder dialog will open. In it, you'll enter the path to the folder. The dialog will help you by automatically completing the parts of the path when you start to type them.
The path begins with slash character ("/"). Enter that. The rest of the parts will be separated by slashes.
The next part is the date and time of the current snapshot. Enter a "2", and the rest of the date should be filled in automatically. Press the right-arrow key to jump to the end of the path. Enter a slash to start the next part.
Next is the name of the volume (usually "Macintosh HD" unless you gave it a different name.) Start to type that, then jump to the end and enter a slash.
The next part is "Users", followed by a slash.
Next is your (short) user name, which is also the name of your home folder.
Finally, enter "Library", then press return. You should now be in the Library folder. From there you can get around as in the Finder.

Can't restore from time machine after SSD upgrade

Macbook Pro 13" mid-2009, 10.7.5 Lion
I just swapped out my 160GB HDD with a 250GB SSD on my MBP. When I booted up, I pressed Command-R to try to get into recovery mode but all it does was showing a gray folder with a question mark on it.
I had previously backed up my HDD with time machine. My original HDD is no longer available because I tried to upgrade to Mavericks (since the command-R was not working) and upon restarting my MBP was locked with system pin code (that is another nightmare all by itself)
What are my options besides getting a 10.7 Lion CD from the apple store and try to boot it up that way? and then restore from time machine?
Any other way I can get into receovery mode?
Thanks (My MBP is now a brick sitting on my desk)

It's a bare drive so it isn't formatted and it doesn't yet have a Recovery HD installed on it.
Your computer originally came with a version of Leopard installed. You can reinstall it if you still have the original discs that came with the computer. Or, if you have a retail Snow Leopard DVD you can reinstall Snow Leopard from which you can then upgrade to Mavericks (Lion is no longer available for re-download.) It's unlikely your local Apple Store has a Lion USB flash drive or DVD although you can certainly make an appointment and ask for their help.
You should see if you can boot from the Recovery HD invisible image in your Time Machine backup drive. Connect it to the computer and use OPTION boot to get the boot manager. If you see a Recovery HD on your backup drive displayed, then boot from it.

Time machine bug after upgrading system

Hello,
I just upgraded my macbook pro from Lion to Mountain Lion.
After this upgrade, I created a new admin account and tried to install back my previous account with my entire files thanks to migration assistant with a time machine data.
Unfortunately, it seems that my 150go of personal data are in my hard drive after time machine'work but I can see my last account with my entire file. I have just the choice to loggin to my new ML admin account. Moreover, I can use some application with this new account but the fact is that I can found my important files.
Do you have any solution in order to find my previous account?
Thank you,
Regards,
Niels.

See the pink box in Problems after using Migration Assistant for an explanation. One of the workarounds in the green box (probably #4) should set things right.

Cant Recover from Time Machine after Yosemite upgrade

I have a 27" iMac (w SSD Drive) and after the initial Yosemite upgrade i had to uninstall because it hung trying to boot. After some help from Apple I lost all of the data and apps on my hard drive (thanks???). The restore utility (restart option r) restored me back to Mountain Lion. I wasn't concerned as I have a time machine. I tried to restore from Time Machine using command-r and it is said I don't have enough space? I retried the Yosemite upgrade which seems to be working fine (a couple of reboots and has been ok (cautiously optimistic. I Entered Time Machine and clicked on the last valid backup in the timeline (the time line shows many) and nothing? It should have scrolled backwards but it didn't (the bar highlighted red when I hovered over). I tried to use the little arrow to move back and it doesn't do anything? All I can do is cancel? Am I doing this wrong? Any suggestions?

Yosemite has to index the backup.. over wireless this takes days.. no kidding.. even over ethernet it takes a very long time.
Is the TM backup on a Time Capsule or on external drive??
How long are you waiting?? Please don't expect instant indexing even on fast external drive... and on wireless connection to a TC.. forever could be close to the time period.
If you had have asked before you started down this route.. I would have strongly recommended you take a bootable clone from the disk before you attempted anything.. Carbon Copy Cloner creates a reliable and easily tested backup since you simply boot from it.
Time Machine is now so hard to use, so unreliable when you change OS version.. it is seriously time to stop using Time Machine.. or at least supplement it with something more reliable.

Extremely Slow Time Machine Backup after upgrading to 10.8.3

Time machine backups are taking an extremely long time on my retina MacBook Pro 13 inch after upgrading to 10.8.3. It's taking many minutes just for a kilobyte to be backed up. I've tested transferring something to the disk and it's lightening fast so there's nothing wrong with the disk.
Is anyone having similar issues or know of a fix?

I had the same problem with slow backups. Called Apple 5 times and went through all the hoops checking plists, airport, and then erasing using my airport utility and the first backup of about 25-30 gigs went fine, but the second backup would take between 1-2 hours. By the time it was finished it was ready to do another backup.
After looking at community fixes I found that my Comcast Norton Anti Virus was the problem. Upon speaking for the 6th time to Apple I was told that should have been the first thing they asked, since antivirus programs check each file going to the time capsule. Even unchecking the scan external drives did not help.
I removed the Norton AV from my system and replaced it with the IAV from apple store (free) and my backups are back to normal. I timed a 100 meg using Ethernet/LAN and it took 9 minutes 32 seconds from clicking backup now, searching for backups, preparing backup, backingup, and cleanup. My Wifi connection on 10 megs took only 1 minute 29 seconds.
Now my backups run so fast I don't even see them working. Also the constant updates to Norton were casuing my backups to be 100 megs or more each time due to daily Norton updates. Now I get backups in the order of 10-20 megs - depending up what I have put on the machine. If I put music on it increases the size of the files installed.
I recommend anyone having this slow time capsule problem to turn off your full antivirus program no matter what you are using and watch the difference in speed. I am so happy! No more 2 hour backups and 45 minutes to 1 hour preparing backup! good luck

Time Machine Error - After Upgrade To New Hard Drive

I just upgraded from my previous 500 GB hard drive to a new 500 GB hard drive in my late 2008 unibody Macbook Pro. I have an external 500 GB hard drive that I use for my Time Machine Backups also. I used CCC to clone my original hard drive to the new internal one and everything went just fine.
I also deleted all my Time Machine backups from the external so I could just create a new one after the upgrade and cleared all the trash bins too. But now when I try and create the Time Machine backup, it gives an error that 592 GB is needed to create the initial backup, even though it is only from a 500 GB drive (of which only 440 GB) is being used. I wouldn't think this would be a possible error. Can anyone offer some help, or did I just shoot myself in the foot? Thanks.

Agreeing with Kappy, TM needs 2-3 times the size of the data it's backing-up. See #1 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
The reason this backup is failing is, TM adds 20% to the estimated size of the backup when requesting space on the backup disk, for temporary workspace and in case the estimate is low. So your 440 GB will require, temporarily, 528 GB.
Short term, you can wrangle a backup by excluding something large, at least 90 GB, (so TM will only request, say, 410 GB + 82 GB for the first backup). Then remove the exclusion and run another, and it should fit.
Longer term, you really do need a larger drive.

Why doesn't Time Machine work after upgrading OS to 10.7.5?

I have late 2007 MBP 3.1 and late 2008 iMac both of which I upgraded with the combo client software release recently. Now I cannot get Time Machine to work on either machine.
I use a Seagate 1.5 TB firewire external drive for backups - it checked out fine on testing.
Has anyone else had this problem since the upgrade to Lion was released?
J

Have a look at this thread;
https://discussions.apple.com/message/19832172#19832172
If you disable Spotlight for the time-being, Time Machine will work...

Time Machine backup after upgrading from 10.6

Hi all,
I'm planning to upgrade from 10.6.8 to 10.7 on a MacBook from 2007, and I have a question about my Time Machine set-up. I have this backing up on an external HD, and I am wondering if, when I've upgraded to 10.7, the Time Machine software will access the same set-up I had in 10.6.8? Will it just pick up from where 10.6.8 left off or will I have to start again?
Thanks,
David

Sadly, after a few successful backups, the same old folder message came roaring back.
Console says:
11/8/11 11:39:48.506 PM com.apple.backupd: Starting standard backup
11/8/11 11:39:48.632 PM com.apple.backupd: Backing up to: /Volumes/VERBATIM BU/Backups.backupdb
11/8/11 11:39:49.456 PM com.apple.backupd: 2011-11-08 23:39:49.431 FindSystemFiles[97145:f07] Looking for system packages
11/8/11 11:39:58.046 PM com.apple.backupd: 2011-11-08 23:39:58.045 FindSystemFiles[97145:f07] Using system path cache v`56'.
11/8/11 11:39:58.454 PM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/VERBATIM BU/Backups.backupdb/RonViMac3h size:37
11/8/11 11:39:58.501 PM com.apple.backupd: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/VERBATIM BU/Backups.backupdb/RonViMac3h size:37
11/8/11 11:40:08.530 PM com.apple.backupd: Backup failed with error: 2
Google says that lots of people are having this problem after upgrading to Lion. Clearly not everyone, but those of us HAVING the Lion problem must have something in common!

Imac keeps crashing in time machine backup after upgrade to mountain lion

2008 imac kept crashing (shutdown and restart) during first backup after upgraded to mountain lion. The backup size was about 10GB but time machine crashed after a while (at most 2GB) and never completed backup. So, I don't have any backup since right before I upgraded from Lion. Any suggestion?

Something strange happened. I was able to get time machine to work by going out to the login screen (the account kept logged in) and let it run the backup with the screen off (screen auto off after a few min). I tried it on two different external drives and that did the trick on both. Since the initial Mountain Lion backup was huge (155 GB), I was quite surprise that it worked at all. I assume your MBP was a Lion to ML. I also just did a 2012 MBP upgrade but that one was smoother. I did not recall having crashing issue. One thing I did find during this was that my WD passport USB drive was corrupted. Not sure it was the cause or not. I had to erase and reformat to get it back to work. Maybe do a verify disk to confirm. Good luck.

Cannot Access Earlier Time Machine Backups After Upgrade To Mountain lion

I went into Time Machine to recover some past emails. It shows that it had backed up my emails for the last year, however it will not let me recover anything before my upgrade to mountain lion. Does anyone know of a workaround for this problem. Thank you.

Christopher Sant wrote:
Once it does finally recognize (after a good while) it simply says "Error, time machine could not complete the backup"
There should be more to that message. See #C2 in Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it. If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results.

Time Machine usage after upgrade to Lion

Hi,
On one of my Macs I've still Snow Leopard running and I'm using Time Machine for backups.
Question: After upgrading to Lion on that Mac, will I be able to continue "incremental" Time Machine backups OR will I have to make a complete Time Machine backup of the entire hard drive?
Many thanks.

Because of the new OS, Time Machine will want to backup the whole new OS and all other files affected by it. It's a lengthy backup. Then it will go back to incremental backups.
Hope this helps

How to backup Time Machine itself, after upgrading to firmware 7.6.1?

I recently updated my Time Capsule to 7.6.1.
The option "Archive" that I used to backup my Time Machine disk to another disk connected via USB disappeared...
How do I do to do it now?
Thanks

I suggest that you download and install AirPort Utility 5.6 for Mac OS X Lion if you need more functionality.
You can keep both AirPort Utility 6.0 and 5.6 on your Mac and use the application that you choose.

Time Machine in HD Upgrade

Similar Messages

Maybe you are looking for