Time MAchine issue or had WD HDD died?

For the last two years I have had My Book Premium 500gb External HDD partitioned (using Disk Utility) into two equal volumes that I have named MyBook 1 and 2 respectively. I use My Book 1 for for my Time Machine backup drive and My Book 2 for odds and ends and my iTunes library. My Book 2 get
Recently my iMac has been slow booting up. I checked all my volumes (including my iMacs internal HDD) over for errors and found a number of serious errors in Mybook 1. I was prepared to reformat this volume and start over with the Time Machine backups because this volume had corrupted before about a year ago. Anyway Disk Warrior got my MyBook working again for about a week. However I recall that it mentioned DW reporting that it had made 'Volume Wrapper repairs where necessary" or something similar.
Anyway the other day both volumes disappeared from my desktop. I fired up Disc Utility, then Disk Warrior but neither programme could see the MyBook Drive. Then my iMac refused to boot up. I got the 'white screen of death'. The MyBook began making a faint clicking noise about once every second or so. The only way to get my iMac to boot up was to disconnect my MyBook Premium HDD from the Firewire connection. I couldn't even boot from my Disk Warrior DVD unless the MyBook disconnected.
So I am thinking my My Book has died. and wondering whether there any way to recover it even though my iMac won't start up with it connected?
Anyway, next day I got the external HDD working again.
The iMac was off but I noticed that the MyBook was still spinning after several hours so I pulled the power cable out of the drive. The spinning stopped but for some reason the round blue display on the front remained lit up. In fact it only went out when I removed the Firewire cable from the MyBook leaving the iMac end in situ . The MyBook was quite warm but not hot.
I decided to leave it alone overnight and went away. Came home from work this evening. Pondering about the problem I turn off Time Machine in the System Preferences pane and wrote the above account.
An hour later I plugged the MyBook back in with the iMac running. Nothing happened but I didn't expect it too. So, on a hunch, I restarted my iMac. Lo, it fired up immediately. Not very very slowly or stuck at the grey screen. Both volumes appear on the desktop. The only difference is both have the yellow and white Firewire icon, presumably because I have turned off Time Machine.
So my hunch is that Time Machine has an issue - not necessarily with Snow Leopard.

I got it working again by removing and then replacing the cable firstly at the HDD end, without success and then at the Mac end. This time all booted up and both volumes appeared on the desk top.
The Hdd then spent over an hour transferring about 140 gigs (MyBook2) to my internal Hdd. No problems that I could discern. The external HDD spun down but a short while later it was spun up continuosly again. By way of an experiment I went to the Desktop and ejected both volumes. The external HDD spun down.
Now however I'm back to nothing on the desktop and a continuously spun-up External HDD.
I'm looking through the WD Support pages now with a view of interrogating them about this. Hopefully it is only a matter of updating the firmware as was mentioned earlier I think.
Thanks

Similar Messages

Time Machine issues with OS 10.6.8

Hi all,
after updating to 10.6.8 I noticed a Time Machine issue.
Backup takes very long but only a few MB were backed up.
And after it was finished, Finder crashed and I had to do a hard reset.
There´s also a "in progress" file on my USB Backup HDD after finishing.
Checking my HDD´s and repairing it wasn´t the problem.
Today I tried a new USB HDD to make a fresh Backup via Time Machine.
After a few hours it was finished, but only 7,8MB were backed up and still there is an "in progress" file on my new Backup HDD.
Here´s a troubleshoot:
Starting standard backup
Backing up to: /Volumes/My Book/Backups.backupdb
Ownership is disabled on the backup destination volume. Enabling.
Backup content size: 368.5 GB excluded items size: 75.7 GB for volume Macintosh HD
No pre-backup thinning needed: 351.34 GB requested (including padding), 930.54 GB available
Waiting for index to be ready (101)
CarbonCore.framework: coreservicesd process died; attempting to reconnect but future use may result in erroneous behavior.
Copied 7.2 MB of 292.8 GB, 5 of 1058420 items
Copied 11 files (27.1 MB) from volume Macintosh HD.
No pre-backup thinning needed: 100.0 MB requested (including padding), 930.52 GB available
Copied 165 bytes of 0 bytes, 4 of 0 items
Error: (-36) SrcErr:YES Copying / to (null)
Copied 7 files (236 bytes) from volume Macintosh HD.
Error -50 deleting backup: /Volumes/My Book/Backups.backupdb/Computer/2011-07-19-180247.inProgress
Starting post-backup thinning
No post-back up thinning needed: no expired backups exist
Backup completed successfully.
Can anyone help me?

A whole lot about Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
There are two important errors noted in the backup:
I-O error -36 « fuzzybrain|daisychain|blogdrain
The following comes from the LaCie web site but is applicable to any other external drives whether home brew or commercial.
Getting error -50 when copying data in OS X.
Some LaCie drives ship out formatted FAT32 so they will be ready to use on either a Mac or a PC. If you are getting error -50 when copying to a LaCie drive, or any drive formatted for PC, it is because of the following:
Certain characters that can be used in a Mac OS X filename are not allowed in MS-DOS filenames. This can prevent the file from being copied, and can occur when a filename contains non-printing ASCII characters, or any of these characters: ? / \ < > " | > *.
Either copy the data off of the drive and use Apple's Disk Utility to erase the drive in Mac OS Extended format, or change the filenames of the documents that cannot be copied.

Time machine issue after Yosemite install

After performing a clean install of Yosemite and migration from my TimeMachine backup I experienced the following:
I opened iTunes and selected some music to play, then got a dialog box saying the files could not be found. Spotlight couldn't find them either... they were just gone. Naturally I went to my Time Machine backups and was surprised the music was gone from the backups, all the way back to the first backup. Very wierd. During the migration I went through the "Cleaning up old backups" process, not sure exactly what this process is.
I was pretty bummed that I had permanently lost a lot of music, some was recordings of friends playing live that could never be replaced. I then remembered that some time ago, just for the **** of it, I copied my sparsebundle backups to an external drive and stashed it in a drawer. I browsed it, and lo and behold there were the missing files. So I narrowly escaped a big problem, but wy did this happen? What are they doing over at Apple?

Hatrabbit wrote:
Naturally I went to my Time Machine backups and was surprised the music was gone from the backups, all the way back to the first backup. Very wierd.
This is really bad luck. And what can be seen here, it is not related to Yosemite but Mavericks, since I asume your backups were made with Mavericks. Though, it is possible that this bug still persists with Yosemite.
I have a similar problem. I am still on Mavericks. I see missing files in ~/Library/Preferences on a regular basis. When I come aware of it, I fix it manually by excluding Preferences folder from backup, run backup, include folder Preferences and finally backup again. But this fix does not last for long. Suddenly after some weeks I see a again missing files in that folder, when browsing the "Latest" backup.
I have found some related discussion:
Time machine missing files
http://forums.macnn.com/90/mac-os-x/509489/potential-time-machine-issue-maverick s-leaving/
http://apple.stackexchange.com/questions/130955/some-files-are-gone-after-recove ry-from-time-machine-backup-why/150230
http://apple.stackexchange.com/questions/136453/time-machine-not-detecting-chang es-in-certain-folders
https://twitter.com/ThatDJJP/status/526429152153714690
missing mail after installation
No solution until today. Very frustrating.
My feeling is, that many users do not recognize, that they are victim of this horrible bug, cause in most cases only few folders are hit by this bug.
And now since Yosemite is out, people are actually using there backups for the first time since Mavericks and run into a disaster.
Atm I am trying to test, if maybe fsevent daemon is the problem, in the past there have been issues like http://openradar.appspot.com/10207999
I did a check on my drive, and I found issues with realpath()/readdir(). Though, those issues may just be old and have not been detected by me for a very long time. My MBP is 5 years old and I upgraded all the way from 10.5 to 10.6 to 10.9.
With 10.6 I never had such an issue.
But more likely, the issue is related to the "Cleaning up old backups" process. Cause I also have the feeling, that when my backup drive gets full and the shrink process took place, then the result are missing files in younger backups then the ones cleaned. If that is true, then maybe the hard-link-approach of Time Machine is somehow involved.

Time Machine Issue -- Error not found anywhere

I am having a Time Machine issue in which the error displayed cannot be found anywhere: Google, Bing, Apple, etc.
The error message is: "Time Machine couldn't find some of its settings on the backup disk "BACKUP". Make sure the backup disk is connected, and that other connected disks don't use the same name as the backup disk. Last success backup: 6/21/10 at 2:52 PM"
The other odd thing is that my Time Machine folders are empty. The directory structure is: BACKUP > Backups.backupdb > TIGERMASTER > {empty}. (TIGERMASTER is my MacBook Pro's name.)
When I do a Get Info on the directories, it reports Zero kb on disk with 0 items. When I do a Get Info on BACKUP, it reports 833GB used, with about 140GB free (it's a 1TB external HDD).
Disk Utility sees folders and files, however: "Number of Folders:583,061 / Number of Files:3,725,350"
Um, help?!
My Mac's Info:
*Model Name: MacBook Pro*
*Model Identifier: MacBookPro3,1*
*Processor Name: Intel Core 2 Duo*
*Processor Speed: 2.4 GHz*
*Number Of Processors: 1*
*Total Number Of Cores: 2*
*L2 Cache: 4 MB*
*Memory: 4 GB*
*OS: 10.6.4*
*Ext. HDD: LaCie 1TB*

Here are the last few lines of the error output. The entire output was laden with red text, which indicates errors:
+Invalid node structure+
+Invalid record count+
+Rechecking volume.+
+Checking Journaled HFS Plus volume.+
+Invalid node structure+
+The volume could not be verified completely.+
+Volume repair complete.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.+
The most common output error (there must have been over a hundred) looked like these:
+Overlapped extent allocation (id = 10715055, /.HFS+ Private Directory Data+
+/dir_10712993/Mobile Backups/8884195JY7H/Structured/4eea38a1ac5f110bcb3d0a10ce4d571300ab85aa.mddata) +
+Overlapped extent allocation (id = 10715056, /.HFS+ Private Directory Data+
+/dir_10712993/Mobile Backups/8884195JY7H/Structured/4eea38a1ac5f110bcb3d0a10ce4d571300ab85aa.mdinfo) +
+Overlapped extent allocation (id = 10715057, /.HFS+ Private Directory Data+
+/dir_10712993/Mobile Backups/8884195JY7H/Structured/4f01e5e3411040bbec70277a704bfeb5b735d336.mddata) +
+Overlapped extent allocation (id = 10715058, /.HFS+ Private Directory Data+
+/dir_10712993/Mobile Backups/8884195JY7H/Structured/4f01e5e3411040bbec70277a704bfeb5b735d336.mdinfo) +
I tried to mount the disk, but it gives me the error: "The disk BACKUP could not be mounted. Try First Aid on the disk and then retry mounting." Of course, I can't back up any of the files because I can't mount the disk.

I've mistakenly deleted Time Machine backups from my external HDD. How do I fix this?!

I manually deleted several Time Machine backups from my external HDD. Whenever I attempt to empty trash, it states (error code -22) has occurred. How do I fix my predicament?
I understand (now) that I should never do this and ONLY delete from the Time Machine app itself but I did not assume this would be so complex by taking a blind stab at it. How do I either a) place the Time Machine backups where the originated (Put Back is not an option when right-clicked) or b) successfully delete these so I can clear my bin.
I am running Mac OS 10.10 on a 13" MacBook Air (mid-2013) w/ 4GB of RAM and 128GB SSD. My external drive is a 5400 RPM WD USB 2.0 External Hard Drive.

Try Trash won't empty deleted time machine backups

Time Machine issues (16030) sparsebundle" is already in use for Time Capsule backup

Time Machine issues (16030) sparsebundle” is already in use for Time Capsule backup process. Just started happeing been using it for over two years.

First, restart the computer and the Time Capsule. In most of the cases, this solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html

Access the local Mac's Time Machine without its external USB HDD?

Hello.
Is it possible to access the local Mac's Time Machine without its external USB HDD? Or is the external backup HDD required? This is assuming Mac OS X 10.8.5. I am not sure if the newer versions can do it.
Thank you in advance.

Eric Root wrote:
Those are local snapshots. The best thing to due is backup Time Machine and then access it.
Local Snapshots on Portable Macs
How do I access these local (one/1)s without the external HDD connected? I do not get the TM icon option in my top menu bar.

Good evening, after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searc

Good evening,
after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and not by being obliged to open my hard drive.
Would you please tell me what I should do. Thank you.
Best regards,
Robert

Huh?
As it did not work out,for fear of losing all my pictures I loaded Iphoto 9.4.3 with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
Do you have two version of iPhoto on your Machine?
And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
So, whatever set up you have is confusing.

Time Machine Issues

Time Machine Issues
Receiving "Can't connect to a current Time Machine backup disk" error when entering Time Machine
Hello, there! Austin here. I started receiving this error after I completed my first Time Machine backup. It happens every time I try to enter time machine. Any solutions would be greatly appreciated.

Time Machine Issues
Receiving "Can't connect to a current Time Machine backup disk" error when entering Time Machine
Anyone?

Western Digital External HD and Time Machine issues

I have been using my 500 Gb Western Digital Passport drive for the past few months, though I purchased it almost a year ago. I had been using it as a back up drive using Time Machine, though I also put other files on it at times. Recently it had been having issues backing up, and now it hasn't been recognized by my Mac. It hasn't had this problem before and when I tried to repair it, I received this message:
Verify and Repair volume “disk1s2”
Checking Journaled HFS Plus volume.
Invalid B-tree node size
Volume check failed.
Error: Filesystem verify or repair failed.
I'm worried that I won't be able to retrieve the data. I also don't want to reformat the drive if I have any other options. Please let me know what I can do, thank you.
(I'm also pretty sure that my drive is pretty much a goner and that I won't be able to retrieve my data).

ReiNocturna wrote:
Thank you, I'd seen some things about Disk Warrior and wasn't sure. I'll have to scrape money together I suppose.
Here is an image of the issue I encountered: Problem.
Yes, +*Invalid B-tree node size+* is one Disk Utility usually can't fix, but Disk Warrior often can.
Disk Utility can detect it, but not Finder, so I guess I've got no hope unless I use Disk Warrior, and even then it's only a possibility.
And so if I end up having to reformat the drive, I should probably use a different external for back-ups?
Depends. If these are your only backups, that's safest. If you have secondary backups (see below), I'd be inclined to give it another chance.
Any brands you recommend? (I'm getting tired of all these externals dying out on me, but then, technology does that sometimes. ;))
A lot of folks say WD's are junk (including those at CarbonCopyCloner), and we do see a lot of reports here, but they also sell a lot of them, so it's hard to tell whether they really fail more often than other makes. But other folks say they've used them for years without undue problems.
I've got a Seagate about 18 months old, and a LaCie Rugged (portable) about 6 months old; OWC and Iomega also seem to get good reviews.
|
I've learned over the years (mostly the hard way, of course ), never to trust my backups to a single app or piece of hardware: no app is perfect, and all hardware fails, sooner or later.
Like many here, I keep both full Time Machine backups, plus a "bootable clone" on a separate external HD. I use CarbonCopyCloner, many use the similar SuperDuper. That gives me the best of both types of backups, plus of course a completely separate, independent backup.
CCC is donationware; SD has a free version, but you need the paid one (about $30) to do updates instead of full replacements, or scheduling. Either is easily found via Google.
And/or, see Kappy's post on Basic Backup, complete with links to the web sites of each product.

Does Time Machine only work with external HDD's and Networks?

I have a Mac Mini that I just replaced the optical drive with a hard drive. This second HDD is formated into two partitions, with one of them being for my Time Machine backups, the other a media scratch drive.
When I try to choose this volume in setting up Time Machine, I get an error message that says, +"Are you sure you want to back up to the same disk your original data is on?"+ The message goes on to explain that +"the volume you have chosen for storing backups is on the same disk as the volume containing your data... you should back up to a volume on a different disk."+
The volume that I have selected IS on a different disk than my start-up system drive and the data to be backed up IS NOT on the same disk as the disk storing the backups. System Profiler defines my startup HDD as "BSD Name: disk0" and my second HDD as "disk1," with the two partitions "disk1s2" and "disk1s3." Mount Point for the start-up HDD is "/" and the two partitions on the second HDD are "/Volumes/Scratch Disk" and /Volumes/Time Machine." These two volumes show up as options when I "Choose Backup Disk" in Time Machine, but not the Mini's startup HDD.
Does Time Machine allow the use of second internal HDD? I have an external HDD, but it has a clone of my start-up drive on it. Thanks for any help.

Chris, excluding the other volume could certainly be the issue since the two options that I'm given for a backup volume are both on the same hard disk. The start-up system HDD is not listed. Maybe the message is referring to this, rather than to the start-up disk.
Not until after I selected "use this volume anyway," did I get to the "Option" screen to exclude items from the backup. When I selected "+" I was surprised to find the other volume, Scratch Disk, listed along with the start-up HDD as being included in the backup routine. So I selected Scratch Disk as one of the items to exclude.
As V.K. mentions, the cautionary message is rather vague as to what exactly it is referring to. Thanks.

Time Machine issues, restoring from iPhoto '09

I have a mid 2010 15" MBP which has been a trusty steed up until October 2014, where the logic board failed. I did the depot repair, and I mistakenly reset my Time Machine as well since I somehow forgot the password and started, I think, a new network and data.
I just started to look at ways to restore my old files that I had backed up with my Time Machine pre-October 2014. I browsed and browsed websites and forums, but no matter what, I was stuck with the new backup starting from October 2014.
Last night, I used Migration Assistant (I know, why didn't I use that first?) and success, I was able to access my files I had backed up to Time Machine before my logic board failed. But here's the issue. Somehow, my photos cannot be found. I did update the iPhoto to the newest version, but I cannot find the old iPhoto library pre-October 2014. I even went into Time Machine, but for some reason, it goes back to the post-October 2014 backup, even though I migrated everything from the pre-October 2014 backup. I know it sounds confusing, but I should have everything from the pre-October 2014 backup if I did Migration Assistant and every files seems accounted for.
I guess if anyone could help me find the iPhoto library, that'll be great. Under Pictures, there is an iPhoto library icon, but it is grayed out. Hope this is helpful. Any assistance would be greatly appreciated!

If this helps, if I manually type in the file name of the images in Finder, I can only access the thumbnails. Is this a good thing?

Third external drive that won't show up! OS or time machine issues?

Hi,
This is driving me crazy...
This is my third seagate drive manifesting similar issues which leads me to believe maybe there is an issue not with the drive, but with my operating system (maybe Time Machine)??
My original extenral drive (set up to be backed up using time machine) one day would no longer show up in finder. (My macbook pro still under warranty; I went to Apple genuises. Drive at first took a while to power up, then next try didn't. It wouldn't "mount," they showed me in Disk Utility. They said problem was the drive. I returned drive and got a "new" refurbished replacement as I was still under seagate warranty also.
Then same thing with next one, showed up at first to do back-ups then intermittently--and then, it, too wouldn't even power up. Returned that one.
NOW I HAVE A REFURBISHED REPLACEMENT THAT DID ONE SUCCESSFUL BACKUP AND TODAY, PLUGGED IN AS USUAL, WILL NEITHER POWER UP NOR SHOW UP IN FINDER. (I have tried numerous outlets, btw).
I won't go into the whole story, but in case it's relevant: I have had major issues for over a year with Time Machine (since updating to Mountain Lion and changing my internal HD). Time Machine can't find my time capsule disk. There were other system failure problems with my computer which after my HD was wiped out TWICE have not recurred; nor were they ever clearly diagnosed.
Could the above string of issues be a software problem with Time Machine (or my operating system) causing all the rest of the issues???
I was about to box up the second Seagate and return it! Now the identical problem showing itself with the new one!!! What to do?? (Because TC not being found and this disk not showing, I have no backups I can rely on at the moment... Makes me very nervous. (I am going to look into clones etc. but want option for successful TM backup as well.
Thanks!

just want to add, that these are Seagate drives for MAC: Free Agent GoFlex 2 TB.
I have disconnected. Rebooted computer, reconnected. To no avail.
Have checked with firewire and power cords from second and new drive in varying combinations. No powering up. no showing up in Finder. (I did install the software that came with the new drive.
Also, when I just tried to back up via TM it looked for the seagate that I have just erased with a 3-pass security, preparing it to return to Seagate. I wanted to delete it from list of back up disks in TM and it does not give me option to do that.
So now, I have two big check marks, one next to Time Capsule and one next to the second seagate in TM preferences telling me that disks are not available. (Btw--after not finding Time Capsule for months, one day, TM was able to findTC and did a back up two weeks ago, then couldn't find it anymore after that.
Just wanted to give full picture.

Time Machine Issue with new system board.

OK MAC Fans here is an issue that I discovered with Time Machine (TM).
First I have a 17” MacBookPro that has two 1TB external HDs and a 30” monitor attached to it.
Something happened to my system and the system board had to be replaced.
The Mac was sent to TX and a new system board was put in it and the very latest OS (10.5.2) was installed on the hard drive.
The Apple store added my profile so you think everything would be good?
Wrong!
None of my applications made it through.
But I was thinking let just use Time Machine to restore them. WRONG in a way.
The first thing I did when I got home was set up TM. I pointed TM to the external HD that has all of the previous backup files and TM wanted to backup the system. During the backup I notice that TM created a new directory for the backup files.
The name of the directory was the name of my MAC. The old directory was also the name of my MAC but with the new OS software release it was stated that you could not use any special characters when naming your MAC or TM may not recognize your backup files (there is a note on this under support).
The new name is FirstnameLastnameMacBookPro17 the old name was Firstname Lastname’s MacBookPro 17”. TM created a new directory named FirstnameLastnameMacBookPro17 and this was the only files that are visible in TM.
I deleted the new directory and renamed my MAC back to the old name and TM created a NEW directory with the old name. Now there were 2 directories with the same “old” name. I can not get TM to use the old directory and display the old backup files.
I was able to drag and drop the files and applications I needed from the previous backup folders back to where I needed them to be so all is not lost but I can not restore files from TM.
Also I renamed my MAC back to FirstnameLastnameMacBookPro17 and TM automatically changed the name of the new directory to the new name.
I tried to drag old backup folders from the old TM directory to the new TM directory but received an error that the files can not be modified.
The only thing that I can think is that when the system board was replaced TM got confused and did not recognize it as the same system. So now I am starting my backup history all over again. The old backup files are good, the only thing is that I have to drag and drop items I want from those folders to the location I want. I can not use the old backup files in TM.
Dose any one have a magic pill (red or blue) I can take to make the old files visible in TM?

I decided not to worry about the syncing my TM. I was just at the Apple store and they have decided to replace my MacBookPro. I am going to start my backups on the new system all over again. I know I can drag and drop files that I want from the old files to the new system if I want and that will be go enough.

TS1550 Time Machine issue with Mountain Lion. Can you help?

I have an Iomega Mac Companion used as an external backup drive for my Imac running Mountain Lion. After launching Time Machine, I got an error message that said the backup couldn't' be completed because an error occurred while creating the backup folder. I rebooted and everything was fine for 24 hours. Since then, I get the same error message even after another reboot. In Time Machine preferences it says "oldest backup none" and "latest backup none."
Any suggestions?
GR

Finally have it solved!! Sort of... I spoke with Mac support on two occasions and they were extremely helpful. Thought the issue was with the firewire 800 connection. Switched to a USB connection and everything worked great...for about 24 hours. Then had the same error messages. Chatted with Iomega tech support and they finally admitted that there are known issues with Mountain Lion, there is no work around and they have no intention of making it compatible with 10.8.
I'm returning the drive today. Thanks for your help and suggestions. Suggestions for a decent back up hard drive that will work with Mountain Lion?

Time MAchine issue or had WD HDD died?

Similar Messages

Maybe you are looking for