Time Machine light goes dark after 20 seconds with power?

Mac can't find my own network with TM. The TM seems to be plugged in, but no lights.
I pull the electric plug, wait ten seconds and try again. Yellow light is normal for 20 seconds, or so, then goes dark.
My TM is about 4 years old. Do they just die without a whimper?

Unfortunately, most Time Capsules do not live beyond 3 years of age.
You might want to consider having the Time Capsule repaired. Apple will not do this for you, but there are some servicers who can. Check the link for Time Capsule Repairers in the document below provided by forum expert LaPastenague.
A local shop might be able to do the repair as well using the information in the link.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s

Similar Messages

6288 - screen goes dark after 15 seconds

Hi
Have just purchased a 6288. Screen goes dark after 10 - 15 seconds if you don't touch the keypad - very annoying if reading a message. Have turned Power saver and sleep mode off, but screen still goes dark. Does anyone know how to stop it from doing this?
Thanks

Yes it is quite annoying. The screen saver time out does little to remedy this. A way around it that I use is to reassign the navikeys. you can dictate what each button does :go to menu > settings > my shortcuts > navigation key. my up goes to contacts, left goes to new message, right goes to music player and down does nothing. so every time the screen goes black, I just hit the down key to turn it back on.

Time Machine does not backup after using second Mac on different volume.

Hi.
I use an airport extrem with an external usb hdd. It has 3 partitions. On the first one I made an TM-backup (MBP 2.2 Leo), all worked fine. Then I made a second TM-backup (MacBook) on the second partition. Worked fine too. But now TM on my MBP is not able to backup any more. When TM starts, it just "prepares" but never actually backs up.
What is the Problem and how do i fix it?
08.05.08 19:43:48 /System/Library/CoreServices/backupd[192] Backing up to: /Volumes/Backup of Thomas MBP/Backups.backupdb
08.05.08 19:43:51 /System/Library/CoreServices/backupd[192] Event store UUIDs don't match for volume: Mac HD
08.05.08 19:43:51 /System/Library/CoreServices/backupd[192] Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
Message was edited by: Thomas_xp

Time Machine will only back up HFS+ (Mac OS Extended) formatted drives. Reformatting will erase the drive so make sure everything on it is safely copied elsewhere and verify a few test files before erasing the drive. Getting rid of the FAT32 formatting has been problematic for quite a few people. The directions in this article are for good for getting rid of the FAT32 formatting. They are for formatting a Time Machine disk but the directions will work just as well for your purposes.

Time Machine start then stop after few seconds

Hi,
I've tried to reset Time Machine (trashed the library plist file, erased the backup HD), also installed Time Machine Buddy widget.
When I start a fresh new backup, Time Machine start indexing, then stops without backup anything.
The error log of Time Machine Buddy widget is this:
Starting standard backup
Backing up to: /Volumes/TimeMachine/Backups.backupdb
Backup content size: 156.0 GB excluded items size: 1.8 GB for volume Mastoidontico
No pre-backup thinning needed: 185.11 GB requested (including padding), 1.82 TB available
Waiting for index to be ready (101)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
LaunchServices: bad alias at 0x1041d7094, size 104, CSStore size 4391026
* process 240 exceeded 500 log message per second limit - remaining messages this second discarded *
2010-02-02 18:47:12.920 ReportCrash[271:2703] Saved crash report for backupd[240] version ??? (???) to /Library/Logs/DiagnosticReports/backupd2010-02-02-184712localhost.crash
Any help to solve my problem?
Thanks!

Process: backupd [240]
Path: /System/Library/CoreServices/backupd
Identifier: backupd
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [1]
Date/Time: 2010-02-02 18:47:12.319 +0100
OS Version: Mac OS X 10.6.2 (10C540)
Report Version: 6
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x000000014c486000
Crashed Thread: 2
Thread 0: Dispatch queue: com.apple.main-thread
0 libSystem.B.dylib 0x00007fff80044e3a machmsgtrap + 10
1 libSystem.B.dylib 0x00007fff800454ad mach_msg + 59
2 com.apple.CoreFoundation 0x00007fff868377a2 __CFRunLoopRun + 1698
3 com.apple.CoreFoundation 0x00007fff86836c2f CFRunLoopRunSpecific + 575
4 com.apple.CoreFoundation 0x00007fff868369b6 CFRunLoopRun + 70
5 backupd 0x000000010000d2f1 0x100000000 + 54001
6 backupd 0x0000000100004014 0x100000000 + 16404
Thread 1: Dispatch queue: com.apple.libdispatch-manager
0 libSystem.B.dylib 0x00007fff8005dbba kevent + 10
1 libSystem.B.dylib 0x00007fff8005fa85 dispatch_mgrinvoke + 154
2 libSystem.B.dylib 0x00007fff8005f75c dispatch_queueinvoke + 185
3 libSystem.B.dylib 0x00007fff8005f286 dispatch_workerthread2 + 244
4 libSystem.B.dylib 0x00007fff8005ebb8 pthreadwqthread + 353
5 libSystem.B.dylib 0x00007fff8005ea55 start_wqthread + 13
Thread 2 Crashed:
0 ...ple.CoreServices.CarbonCore 0x00007fff85070987 CSStoreGetUnit + 84
1 com.apple.LaunchServices 0x00007fff85df44a3 _LSBundleFindWithNode + 544
2 com.apple.LaunchServices 0x00007fff85decc79 _LSFindOrRegisterBundleNode + 219
3 com.apple.LaunchServices 0x00007fff85decb2d _LSCopyItemAttributeForRefInfoWithOptions + 201
4 com.apple.LaunchServices 0x00007fff85deea77 prepareAttributeValueForKey(__CFURL const*, __FileCache*, __CFString const*, void const**, __CFError**) + 79
5 com.apple.LaunchServices 0x00007fff85dee9dc prepareDistinctLocalizedNameValue(__CFURL const*, __FileCache*, __CFError**) + 36
6 com.apple.LaunchServices 0x00007fff85dee9b3 prepareLocalizedNameValue(__CFURL const*, __FileCache*, __CFError**) + 9
7 com.apple.LaunchServices 0x00007fff85dee7bc LSPropertyProviderPrepareValues(__CFURL const*, __FileCache*, __CFString const* const*, void const**, long, void const*, __CFError**) + 51
8 ...ple.CoreServices.CarbonCore 0x00007fff85081c90 prepareValuesForBitmap(__CFURL const*, __FileCache*, _FilePropertyBitmap*, __CFError**) + 264
9 ...ple.CoreServices.CarbonCore 0x00007fff85080779 _FSURLCopyResourcePropertiesForKeys + 980
10 com.apple.CoreFoundation 0x00007fff8683f402 CFURLCopyResourcePropertiesForKeys + 98
11 com.apple.DesktopServices 0x00007fff84b30169 TCFURLInfo::FetchProperties(bool) + 91
12 com.apple.DesktopServices 0x00007fff84b2ffbd TCFURLInfo::Initialize(__CFURL const*, bool, bool) + 183
13 com.apple.DesktopServices 0x00007fff84b8e07f TCFURLIterator::NextRaw(TCountedPtr<TCFURLInfo>&) + 79
14 com.apple.DesktopServices 0x00007fff84b8e11a TCFURLIterator::Next(TCountedPtr<TCFURLInfo>&) + 40
15 com.apple.DesktopServices 0x00007fff84b8f517 TDeepCFURLIterator::NextInternal(TCountedPtr<TCFURLInfo>&, int&, int&, bool&) + 73
16 com.apple.DesktopServices 0x00007fff84b8f651 TDeepCFURLIterator::Next(TCountedPtr<TCFURLInfo>&, int&, int&, bool&) + 49
17 com.apple.DesktopServices 0x00007fff84b95629 TCopyReader::GetNextItem() + 1039
18 com.apple.DesktopServices 0x00007fff84b95fac TCopyReader::Read(unsigned long long, TCountedPtr<TCFURLInfo> const&, TCountedPtr<TCFURLInfo> const&) + 128
19 com.apple.DesktopServices 0x00007fff84b80f27 TFSCopyOperation::CopyToTarget() + 607
20 com.apple.DesktopServices 0x00007fff84b82d9f TFSCopyOperation::DoCopy(TCountedPtr<TCFURLInfo> const&) + 595
21 com.apple.DesktopServices 0x00007fff84b78a68 _NodeOperation + 469
22 backupd 0x00000001000164af 0x100000000 + 91311
23 backupd 0x0000000100015923 0x100000000 + 88355
24 backupd 0x000000010000ffc7 0x100000000 + 65479
25 backupd 0x000000010000a7e2 0x100000000 + 42978
26 backupd 0x0000000100006927 0x100000000 + 26919
27 com.apple.Foundation 0x00007fff88a2be99 _NSThread__main_ + 1429
28 libSystem.B.dylib 0x00007fff8007df8e pthreadstart + 331
29 libSystem.B.dylib 0x00007fff8007de41 thread_start + 13

Time Capsule access goes away, after new comps with vista

Hi. I am not a computer person, but I work in a small nonprofit and our IT person has gone on vacation. our network keeps creashing and we loose access to the time capsule data. This all started happening after we installed 2 new computeres with Windows Vista and 2 new laptops with Vista were added to the network. Can somebody please help me out. I can't get any work done! Thanks =)

The question is, does the orange blinking light matter and or is it indicating that I am improperly using the machine?
The amber light is like the "Check Engine" light in your car. It blinks for a reason......the Time Capsule has a message for you.
That message might be that there is a firmware update available for the Time Capsule that needs to be installed....or....that AirPort Utility has detected that the Time Capsule is not configured correctly to work with the Xfinity router that you are now using.
To see the message.....open Finder > Applications > Utilities > AirPort Utility
Click on the amber dot
Then look for a Status setting, and click on the small amber dot there
A message will appear to tell you why the Time Capsule is whining, along with a suggested action to fix the issue.
If you are still having difficult, we for you to post back with the exact message that you see.

T41 screen goes dark after one second while powering up

T41 2379-DKU running XP Pro. I power on the machine, the screen lights up with the logo for a second and goes totally dark, but I can still very dimly see the logo on the screen with room lighting.
I replaced the motherboard a year ago for the "flex" failure. Was working fine prior to this, no pink in whites, clear, accurate color rendition. What is broken? Inverter? Backlight?, none of the above?

The inverter that powers your display backlight is failing and needs to be replaced.

HT1339 my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks

my ipod nano 7th generation....works fine as long as it's on the docking station. when off the station, the display goes dark after a few seconds. it's fully charged. please help. this is the heartbeat of my business. thanks

In the worst case, it's still under warranty (all 7th gen nanos are still under one year from purchase).
So, you disconnect it from power, and it almost immediately goes dead? You can try a Restore... but it doesn't sound like the type of problem a Restore will fix.
You should probably have it looked by Apple Tech Support. If there's an Apple Store nearby, you can take it to the store's Genius Bar. To avoid waiting, you can make a reservation at the store's web page
http://www.apple.com/retail/

My macbook 3.1 screen goes dark after a period of use; but if i readjust the screen (close it to about a 30 degree angle) the screen light is on again

my macbook 3.1 screen goes dark after a period of use; but if i readjust the screen (close it to about a 30 degree angle) the screen light is on again. i don't have an external monitor, so i just deal with it. i'm about done dealing with it and am wondering if anyone else had/has this problem, and how did you solve it?

You have a hardware problem. It needs to be fixed.
Contact Apple using www.apple.com/support/contact if you are in a country that supports it or call the appropriate phone number on this page. Alternatively carry the MacBook in to an Apple retail store or service provider to ask for an estimate.

Time Machine backups only work after restart

Hi
Getting frustrated as Time Machine backups only work after a restart. Work for a few hours and then get stuck with Backing up: XXMB of XXGB. I have left it on this for many hours ie overnight without completion
I have a Mid 2014 MBP 13 in running 10.10.2
I backup onto an external USB via a hub.
Things I have tried with review of Pondini great site which has helped with different TM backup problems.
Disk permissions and repair of SSD on MBP (were errors but did not solve issue)
Direct USB connection
Backup via Airport Extreme
Re-index spotlight
Reformat USB disk
New USB disk!
Below is log (backupd filtered) of latest backup attempts including final completed occuring after restart.
Any help gratefully received
19/03/2015 12:59:07.730 pm
com.apple.prefs.backup.remoteservice[2916]
Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
19/03/2015 12:59:10.238 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) Unknown key for Boolean: ForceEnableHack
19/03/2015 12:59:10.240 pm
UserEventAgent[16]
com.apple.backupd-auto launchd job enabled
19/03/2015 12:59:10.238 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 12:59:10.239 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
19/03/2015 12:59:23.162 pm
com.apple.backupd[2929]
Starting manual backup
19/03/2015 12:59:23.358 pm
com.apple.backupd[2929]
Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
19/03/2015 1:01:55.000 pm
kernel[0]
process backupd[2929] thread 893245 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
19/03/2015 1:12:00.297 pm
com.apple.backupd[2929]
Will copy (Zero KB) from Macintosh HD
19/03/2015 1:12:00.350 pm
com.apple.backupd[2929]
Found 221479 files (439.9 MB) needing backup
19/03/2015 1:12:01.050 pm
com.apple.backupd[2929]
2.33 GB required (including padding), 554.92 GB available
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
19/03/2015 1:21:51.062 pm
com.apple.backupd[167]
Starting manual backup
19/03/2015 1:21:51.380 pm
com.apple.backupd[167]
Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
19/03/2015 1:24:40.000 pm
kernel[0]
process backupd[167] thread 7580 caught burning CPU! It used more than 50% CPU (Actual recent usage: 53%) over 180 seconds. thread lifetime cpu usage 90.616005 seconds, (29.940993 user, 60.675012 system) ledger info: balance: 90000913400 credit: 90000913400 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 169146762635
19/03/2015 1:24:40.821 pm
spindump[507]
Saved cpu_resource.diag report for backupd version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2015-03-19-132440_David-Henshaw-Work-Ma cbook.cpu_resource.diag
19/03/2015 1:34:29.100 pm
com.apple.backupd[167]
Will copy (Zero KB) from Macintosh HD
19/03/2015 1:34:29.155 pm
com.apple.backupd[167]
Found 221268 files (493.5 MB) needing backup
19/03/2015 1:34:29.235 pm
com.apple.backupd[167]
2.39 GB required (including padding), 554.92 GB available
19/03/2015 1:35:57.393 pm
com.apple.backupd[167]
Copied 5145 items (486.8 MB) from volume Macintosh HD. Linked 21319.
19/03/2015 1:36:33.451 pm
com.apple.backupd[167]
Created new backup: 2015-03-19-133632
19/03/2015 1:36:39.933 pm
com.apple.backupd[167]
Starting post-backup thinning
19/03/2015 1:36:39.943 pm
com.apple.backupd[167]
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/2AC908D9-122D-4267-9652-74A9DC6C8795
19/03/2015 1:36:39.944 pm
com.apple.backupd[167]
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/A01A1A4C-F424-4F99-9466-6A5F571CE4F5
19/03/2015 1:36:53.268 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-125436 (10.4 MB)
19/03/2015 1:37:05.844 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-115428 (20.6 MB)
19/03/2015 1:37:12.476 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-102131 (1.5 MB)
19/03/2015 1:37:12.476 pm
com.apple.backupd[167]
Post-backup thinning complete: 3 expired backups removed
19/03/2015 1:37:12.495 pm
com.apple.backupd[167]
Backup completed successfully.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1295 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 450 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Screen goes dark after dialing

When I place a call using my contacts or my keypad, the screen goes dark after hitting the green "send" button. It stays dark until I hang up. How do I get the screen light to stay on when I place a call?

This phone has a sensor if you put the phone to your face or even put your hand over to near the top of the screen it will go dark. There is a sensor to prevent false activation of the touch screen.
I found when my phone is working on the car adabter it goes dark rather fast when I make a call. I use a Bluetooth earphone most of the time with this phone. I don't feel comfortable holding it to my ear.
If I see the screen go dark and I need access, I simply run my finger up from the bottom of the screen to bring it back to life.
I am going to look in to this part of the phones operation a little more closely to see if there is anything else I can bring up about this...
Jerry G.

Time Machine multiple password prompts after 10.5.6 upgrade

Wanted to see if anybody else has noticed this behavior change since upgrading to 10.5.6. I back my MacBook Pro to a network drive shared from my Mac Mini. With 10.5.5 and earlier, I'd mount the network drive, and then set Time Machine to use it. I'd get one password prompt, for the initial mount of the network drive.
Post-10.5.6, I mount the network drive (password prompt #1), and then tell Time Machine to use that drive, and I get another password prompt from Time Machine. I'm not sure why this is, and it seems like a behavior change. Has anybody else noticed these double password prompts after going to 10.5.6?
--Bernie

I have the exact same problem since upgrading to 10.5.6. The time machine arrows start spinning, and then stop with the exclamation point. I look at the dropdown and it says "Latest Backup: Delayed"
When I open Time Machine Preferences, it tells me I have 32.2 GB of 232.7 GB available. And in latest backup, it says "Failed" with the little "i" in the circle. When I click the "i" it tells me "The backup volume could not be mounted."
When I actually look at the contents of the drive (which definitely is mounted) I see a 200GB file (the correct size) named [name of my computer]_[some serial number].sparsebundle. The stuff in brackets is replaced since I don't know if that's the sort of thing that I should post.
What seems odd (although I haven't looked at the volume enough in the past to know if it is odd), is that both the modified date and the creation date are March 27, 2008 which, I believe, is when I first started using time machine.
The only other thing on that drive is a folder, "untitled folder"
That's it. I'm not sure about whether it's trying to backup when not connected, but I think I remember that.
Do these specifics fit with what you can see about the current state of your backup?
Tom

IPhone goes black after 5 seconds

My iPhone 4s, when I hit the round button, my screen goes black after 5 seconds. Not sure why, I dont have any timeouts in the settings set to 5 seconds that I can tell, the only one i have is the lock, but that's at 5 minutes. but its pretty consistent if the screen is black, then i hit the round button and it's sitting at the screen to swipe to unlock, if i dont do anything for 5 seconds, it goes black again.
It will also go black randomly while the phone is unlocked and in use. any ideas? Can't imagine 5 seconds is the default idle time for it to go black, that's pretty fast!!

Your iPhone has suffered damage and will need to be take or sent to Apple for replacement. If you have AppleCare+ coverage, the cost wll be $79 US. If you don't, the cost (if memory serves) will be $269.
Regards.

My phone goes off after 20 seconds of restart.

My phone goes off after 20 seconds of restart. I have remove both battery and sim serval times but it keeps going off after 20-30 seconds of normal start and display. I noticed if I plug it to charge after removing and fixing the battery, it stays on till the charger is unpluged. What can I do to stop it from going off?

I've answered your previous post here: http://supportforums.blackberry.com/t5/BlackBerry-Bold/Bold-will-not-charge-turn-on-battery-already-...
Please don't double and cross post... thanks.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

See #C12 in Time Machine - Troubleshooting

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

Time Machine light goes dark after 20 seconds with power?

Similar Messages

Maybe you are looking for