Time Machine loses connection to new Time Capsule
My new 2TB time capsule (replacing my older 2tb time capsule) has been giving me some issues. Trying to backup a couple macs w/ Time Machine. Pretty straightforward stuff, nothing too crazy.
A few facts:
- Running 10.8.4 on both macs
- Most recent firmware update has been applied to TC
- Sleep mode disabled on both macs
When I reboot my computer and start the process of backing up, everything works normally. Then after a certain period of time (varies) it will lose the connection to the disk and the backup fails. This happens every time on each mac. Both machines are still connected to the router, they just lost a connection to the drive. If I navigate to the drive in finder, sometimes it will reconnect. Other times it will not.
A little more info: I isolated the problem to when the disk is being accessed by more than one device at a time. When this happens, the disk gets temporarily disconnected.
Is your new TC the latest AC model.. or Gen4?
The new TC, about a week old.
So this is a few hours or a few days?
Minutes.
Is the TC main router or bridge in the network?
Main router. No other bridges.
Have you reset to factory the TC and redo the setup.. use all short names.. no spaces and pure alphanumeric.
For everything.. TC name wireless names disk share name.
Yes to everything.
If you can test with ethernet.. does the problem still occur??
I have not tested this, might be next step.
Thanks
Similar Messages
-
Time machine not connecting with new time capsule
Will someone please help? I have just recently joined the MAC family and purchased a new Macbook along with a new time capsule. It took unbelievably long to get things running (ie wireless access with 2 other PC based desktops and a PC laptop and shared network printing with an USB connected printer to the time capsule)- I thought macs were supposed to be easy?! Anyways, the only thing that I cannot figure out is how to properly set up time machine. I follow the instructions and turn time machine on, choose my backup disc (which is the time capsule), but when I click "use for backup", I keep getting the "connection failed- server may not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again" What am I supposed to do now? What is there to check when all of the other computers are able to access the internet (including the Macbook) and wirelessly print. The stupid timecapsule router function is working but the backup portion of it is not???!!!! Please help someone who is about to give the mac and the time capsule to the first person walking down the street - it has been a frustrating 2 days.
First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
From the menu bar, select
▹ System Preferences... ▹ Network
Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click
Renew DHCP lease.
Try again to back up.
If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back. -
iMac 10.5.8 ... Time machine died. Bought new Time Capsule2TB. Ordered 10.6 ... Not recommended to install 10.6 w/o prebackup ... Current utility for airport won't do with the new Time Capsule. ... What to do?
You are in the typical catch22.. you cannot use the TC without setting it up.. you cannot set it up without Lion.. so you can install the latest utility.
Do you have any reasonably current iOS devices.. they can run the iOS version of the utility.. that will allow you to set up the TC.
Or invite a friend with a laptop running at least Lion
Or take the TC back and get a plain USB hard drive and backup to that. -
How can I get my Time Machine to recognize my new Time Capsule?
I have a new Time Capsule and in the initial setup I accidently clicked on the option for not using it with time machine. How do I set it up for time machine backup? Right now the wireless function as router works but time machine does not recognize the Time Capsule for back up.
Bob Brewer wrote:
I have a new Time Capsule and in the initial setup I accidently clicked on the option for not using it with time machine. How do I set it up for time machine backup? Right now the wireless function as router works but time machine does not recognize the Time Capsule for back up.
welcome to the discussion area, Bob !
go system preferences > time machine > change disk. re-select the TM's volume and click +use for backups+. -
Time Machine loses connectivity daily now
I'm new to Apple, and to this forum... I have a new (1 month now) iMac 27" (Mountain Lion), Time Machine, and Apple TV... typically everything works fine... but over the last week, about daily - my Time Machine looses Wi-Fi connectivity with my iMac & Apple TV. Pain in the xxx... To get it to work again, don't know if this is good protocol... but I unplug power to the Time Machine, and when it powers back on - I can find my Network.. and relog into it.
I've tried looking this up here... and honestly, if I knew really what I was doing, I might find the answer - but the threads seem to refer to other operating systems (lion, etc.), and the problems seemed a bit different than what I think I am seeing... Any help here?
Thanks!!OK... this is NOT a "sleep" issue... Time machine dropped it's WiFi connectivity today while being used... anyway, iMac is set to "never sleep".. so it's not a "wake up" issue...
No one out there can help me? -
Time machine backups wont move to time capsule
i have two mac minis, one is the mid 2010 model and the the other one is a 2006 model. i have successfuly used superduper to finally move my 500 gigs
of time machine backups to the new time capsule. but the older 2006 model has me lost. i am tempted to go to the applestore to make them copy it
if i follow the directions including resetting time machine the best i can get is a pop up box every hour that says the identity of the time capsule cannot
be verified. this does not show up on the 2010 mini
when i tell it to pick the drive theres 2 other drives that i dont even have! those are "HOME" and "NET" on "localhost" i have no idea where its getting
those drive paths. maybe its my readynas , when i go to /Volumes, there is no home or net folders
another problem i have with time machine is for some strange reason there is a range of backups in an old sparse bundle file and i would like to move all the backups for this computer into one main directory, instead of having to browse old time machines. but when i try to copy from one sprarse bundle to another i get an error saying that the backup files cannot be modifiedrigormortis wrote:
if i follow the directions including resetting time machine the best i can get is a pop up box every hour that says the identity of the time capsule cannot
be verified.
Is that the message in #C15 of Time Machine - Troubleshooting? If so, are you selecting Use This Disk? If not, exactly what does it say (or post a screenshot).
another problem i have with time machine is for some strange reason there is a range of backups in an old sparse bundle file and i would like to move all the backups for this computer into one main directory, instead of having to browse old time machines. but when i try to copy from one sprarse bundle to another i get an error saying that the backup files cannot be modified
That's correct; you cannot merge one set of backups into another. A set of TM backups has a complex structure, with things all linked together; you cannot alter it. See How Time Machine works its Magic for an explanation. -
I have connected a new Time Capsule to a DSL modem using an ethernet cable . The modem is working fine and connected fine. But the Time Capsule doesnt seem to be talking to the modem. If I click the internet Icon in Airport Utility it shows Disconnected.If I click the Time Capsule icon and go to the internet tab it shows Connect using PPPoE. Is that what it should be? In the box below there is place for an account name and password. DO I need to filll these out and if so what do I put there--information about the Time Capsule of informationabout the Modem? And where do I find the information.
Or am I completely on the wrong track.Thanks. The modem is a Speedtouch ST585 v6. How do I know whether it is in adsl bridge? Also this is a modem-***-router. Does that make a difference?
If you did not put it in bridge then it is not in bridge..
Connect a computer directly to the modem.. open the browser to either 192.168.1.254 or 10.0.0.138 (if neither of those work you will have to check the IP address your ISP has set).
BTW who is your ISP and do they allow PPPoE.. for instance most ISP in UK do not use pppoe so you have no choice but to run the 585 as a router. In which case bridge the TC
Anyway.. open the setup configuration in the Thomson and select a template that says bridge.. run through the wizard and it will then bridge the modem.
And I am using Airport Utility 6.0. How do I get the earlier version?
By reading the site link I just gave you.. downloading the utility and running it on your computer. Or simply google to 5.6 lion airport utility... that is the way I find things when I don't have the link memorised.
Finally, AIrport Utility shows a number in a red dot next to the time capsule icon, currently 2. What is that for? What does it tell us?
Firstly download the useful utility.. but the dots tell you something is wrong and preventing the TC from working.. if you open the utility it should tell you what the errors mean.. I cannot tell you what they are, but it is likely to be no internet connection and pppoe has failed. -
I have set up Time Capsule to use with Time Machine but when I open Time Machine it 'cannot find' the Time Capsule and I have to 'Select the Disk' each time. In the Next Backup tab it always says "When disk is connected" even though the disk is already connected.
Your pro doesn't matter.. I presume it is happily working.
Your imac setup has got messed up because you changed from a local (my book being USB type I presume) to network drive. Did you do a clean install of Lion?
Did you use the backup from the Pro on the imac? Otherwise I don't see how the Pro shows up in use previous disk. Where is Pondini when you need him??
You cannot download Time Machine as an App and replace the current version. It is built into the OS.. the only way to do it is a clean install. Unfortunately that might be the only way around the issue.
There is a number of issues that Pondini has covered in the setup issues of troubleshooting.
This is the most relevant I think. http://pondini.org/TM/B6.html
But look at the whole section B setup problems.
http://pondini.org/TM/Troubleshooting.html
If it was me, I would store all the info you need.. not using TM but using a straight copy of files.
Then clean install Lion. I doubt any of these issues would exist if you had not installed Lion over existing setup or used a different backup.
See if you can get Pondini to respond.. !! -
I keep getting this error on my new Macbook Pro w/ Retina.
"Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you."
Connected to a wifi network and QNAP storage system. There are 5 computers on this network, and each backs up just fine. The issue is isolated to this one machine.
This error shows up every week or so.A third-party NAS is unsuitable for use with Time Machine, especially if it's your only backup. I know this isn't the answer you want. I know Time Machine accepts the NAS as a backup destination. I know that the manufacturer says the device will work with Time Machine, and I also know that it usually seems to work. Except when you try to restore, and find that you can't.
Apple has published a specification for network devices that work with Time Machine. None of the third-party NAS vendors, as far as I know, meets that specification. They all use the incomplete, obsolete Netatalk implementation of Apple Filing Protocol.
If you want network backup, use as the destination either an Apple Time Capsule or an external storage device connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
Otherwise, don't use Time Machine at all. There are other ways to back up, though none of them is anywhere near as efficient or as well integrated with OS X. I don't have a specific recommendation.
If you're determined to keep using the NAS with Time Machine, your only recourse for any problems that result is to the manufacturer (which will blame Apple, or you, or anyone but itself.) -
I have been using time machine to back up my Mac Book Pro 3.1 to my Time Capsule. Now the Time machine hangs up on "calculating time remaining".
Mac Book Pro - 3.1-15-inch 2.4/2.2GHz), Processor 2.2 GHz Intel Core 2 Duo
Operating system : OS X 10.10.1
Time Machine Version 1.3, Copyright 2007-2014 Apple Inc., Modified Tuesday, September 9, 2014 at 6:03 PM
Time Capsule: 500 GB C 2007
This Time Machine software worked satisfactory until Monday Nov, 10 2014 and I have backups until that time. For several years, the software deleted the oldest back up to save the latest one. This is acceptable to me as I have off site storage that is updated every 3 months. How do I get Time machine working again?I have spent a couple of days trying to respond to Linc Davis. Finally I figured it out . The following is a copy of data from my console from the initiation of a time machine backup until it gets stuck trying to calculate the time remaining. There is no indication that anything starts saving. I copied about 3 minutes of data. This is probably way too much data, but I do not know what is relevant.
Thanks for the help,
calcool
12/22/14 3:16:54.655 PM com.apple.backupd[551]: Starting manual backup
12/22/14 3:16:55.057 PM com.apple.backupd[551]: Attempting to mount network destination URL: afp://”name”%20”lastname”@Home%20Network%20Time%20Capsule._afpovertcp._tcp.loca l./Time%20Capsule
12/22/14 3:16:57.262 PM mds[33]: (Volume.Normal:2464) volume:0x7fed5ab54000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Time Capsule
12/22/14 3:16:57.565 PM com.apple.backupd[551]: Mounted network destination at mount point: /Volumes/Time Capsule using URL: afp://”name”%20”lastname”@Home%20Network%20Time%20Capsule._afpovertcp._tcp.loca l./Time%20Capsule
12/22/14 3:17:08.000 PM kernel[0]: hfs: mounted Backup of “name” “lastname”’s MacBook Pro on device disk3s2
12/22/14 3:17:09.625 PM com.apple.backupd[551]: Disk image /Volumes/Time Capsule/”name” “lastname”’s MacBook Pro (2).sparsebundle mounted at: /Volumes/Backup of “name” “lastname”’s MacBook Pro
12/22/14 3:17:11.112 PM com.apple.backupd[551]: Backing up to /dev/disk3s2: /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb
12/22/14 3:17:24.931 PM “name”[593]: audit warning: soft /var/audit
12/22/14 3:17:24.944 PM “name”[594]: audit warning: allsoft
12/22/14 3:17:24.958 PM “name”[596]: audit warning: closefile /var/audit/20141222201654.20141222201724
12/22/14 3:17:26.544 PM com.apple.backupd[551]: Event store UUIDs don't match for volume: Macintosh HD
12/22/14 3:17:34.767 PM com.apple.backupd[551]: Deep event scan at path:/ reason:must scan subdirs|new event db|
12/22/14 3:17:34.768 PM com.apple.backupd[551]: Reading cached event database from: /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb/”name” “lastname”’s MacBook Pro (2)/2014-12-22-151726.inProgress/F85FEA51-E137-471A-84DA-A2C00E4ECB42/.1BEF88C6 -20C3-3DDC-AE30-05EAB2AFCC15.eventdb
12/22/14 3:17:38.115 PM com.apple.backupd[551]: Using cached disk scan
12/22/14 3:17:39.114 PM com.apple.backupd[551]: Saved event cache at /Volumes/Backup of “name” “lastname”’s MacBook Pro/Backups.backupdb/”name” “lastname”’s MacBook Pro (2)/2014-12-22-151726.inProgress/5BC46A53-25E8-4C4A-8947-AFB221D1FA0C/.1BEF88C6 -20C3-3DDC-AE30-05EAB2AFCC15.eventdb
12/22/14 3:17:39.355 PM com.apple.backupd[551]: Not using file event preflight for Macintosh HD
12/22/14 3:19:14.782 PM CoreServicesUIAgent[294]: unexpected message <OS_xpc_error: <error: 0x7fff77befc60> { count = 1, contents =
"XPCErrorDescription" => <string: 0x7fff77beff70> { length = 18, contents = "Connection invalid" }
}>
12/22/14 3:20:15.207 PM locationd[182]: Location icon should now be in state 'Active'
12/22/14 3:20:17.267 PM locationd[182]: Location icon should now be in state 'Inactive'
12/22/14 3:20:17.884 PM locationd[182]: Location icon should now be in state 'Active'
12/22/14 3:20:18.483 PM sandboxd[296]: ([310]) com.apple.metada(310) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
12/22/14 3:20:21.646 PM com.apple.metadata.SpotlightNetHelper[310]: [SLSUGGESTIONS] Location managed failed with error Error Domain=kCLErrorDomain Code=0 "The operation couldn’t be completed. (kCLErrorDomain error 0.)"
12/22/14 3:20:23.892 PM WindowServer[143]: disable_update_timeout: UI updates were forcibly disabled by application "Spotlight" for over 1.00 seconds. Server has re-enabled them.
12/22/14 3:20:26.526 PM WindowServer[143]: common_reenable_update: UI updates were finally reenabled by application "Spotlight" after 3.63 seconds (server forcibly re-enabled them after 1.00 seconds)
12/22/14 3:20:28.298 PM sandboxd[296]: ([310]) com.apple.metada(310) deny mach-lookup com.apple.cfnetwork.cfnetworkagent
12/22/14 3:20:29.094 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[599]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
12/22/14 3:20:30.670 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:30.670 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:32.294 PM com.apple.InputMethodKit.UserDictionary[600]: -[PFUbiquitySwitchboardEntryMetadata setUseLocalStorage:](808): CoreData: Ubiquity: “name”~00000000-0000-1000-8000-001B63947FCF:UserDictionary
Using local storage: 1
12/22/14 3:20:32.317 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:32.769 PM locationd[182]: Location icon should now be in state 'Inactive'
12/22/14 3:20:34.580 PM Console[601]: Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable
12/22/14 3:20:35.540 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
12/22/14 3:20:36.388 PM com.apple.xpc.launchd[1]: (com.apple.auditd[604]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.auditd
12/22/14 3:20:36.693 PM “name”[608]: audit warning: soft /var/audit
12/22/14 3:20:36.718 PM “name”[607]: audit warning: allsoft
12/22/14 3:20:37.045 PM “name”[610]: audit warning: closefile /var/audit/20141222201724.20141222202036
12/22/14 3:20:37.438 PM bird[263]: Assertion failed: ![_xpcClients containsObject:client]
12/22/14 3:20:42.437 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.437 PM QuickLookSatellite[611]: Invalid Connection ID 0
12/22/14 3:20:42.477 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.477 PM QuickLookSatellite[611]: CGSConnectionByID: 0 is not a valid connection ID.
12/22/14 3:20:42.612 PM QuickLookSatellite[611]: [QL] No sandbox token for request <QLThumbnailRequest stackshot.log>, it will probably fail
12/22/14 3:20:42.613 PM QuickLookSatellite[611]: [QL] No sandbox token for thumbnail request file:///Library/Logs/stackshot.log, it will probably fail
12/22/14 3:20:42.615 PM QuickLookSatellite[611]: [QL] No sandbox token for request <QLThumbnailRequest stackshot-syms.log>, it will probably fail
12/22/14 3:20:42.615 PM QuickLookSatellite[611]: [QL] No sandbox token for thumbnail request file:///Library/Logs/stackshot-syms.log, it will probably fail -
Time Machine would create a NEW backup
Hello,
sorry for my bad english, I'm not a native speaker.
I'm useing Mac OSX 10.7.3
Since a few days, I've some trouble with Time Machine. When TM would create a new backup in the normal hourly loop it creates the following message:
Time machine has completed the review of its backups. To improve the reliability time machine must create a new backup. (i hope it's the correct translation in englich)
Now I've to options:
1. I can create a new backup later
2. create a new backup
Does anyone knows what is wrong? I don't want to create a new backup, I want to use the old one.
I still have enough space on my backup volume. I'm using the Airport Extreme and a WD hard drive.
Thank you for your assist.
DavidUnfortunately, the issue is that the wireless connection isn't fast enough. The error is saying that basically its going to take too long to do the work.
Not sure how apple makes the time capsule faster,but apparently it works.
Apple suggested configuration is either by a direct USB or FireWire connection, or use a time capsule.
Linc is correct in his last post. You can actually plug in your USB drive at random intervals and time machine will see it and do its thing. This will probably work better in the long run, even though you haven't had any issues up until now. -
Going on using existing time machine backup in a new network
Hello community,
I just set up a wireless network with my new time capsule. As I used to do my time machine backups on an external USB hard drive (Intenso), I connected it to the TC for extending my network space and going on using this volume as my backup-volume.
Unfortunately Time Machine doesn't recognize the Intenso drive as my old backup volume although I did nothing else than plugging it into the TC instead of my Macbook. My Macbook is the same, the OS is the same, the backup drive is the same. Only the port is a different one. I cant understand that Time Machine doesn't recognize my backup only because its now in the wireless network instead of plugged to the USB port.
Is there anything I can do to make time machine going on using my old backup in the network?
Thanks a lot.
FabianUnfortunately Time Machine doesn't recognize the Intenso drive as my old backup volume although I did nothing else than plugging it into the TC instead of my Macbook.
Nothing is the same. There is a huge difference here depending on whether a hard drive is connected directly to a Mac......in which case it is a "local" drive.....or if a drive is connected to a device like the Time Capsule.....which is a "network" device.
In other words, if you connect a drive to the USB port on the Time Capsule, the drive becomes a "network" drive.
Time Machine stores backups differently depending on whether the drive is attached as a "local" drive or whether the drive will be connected as a "network" drive. On a "network" drive, Time Machine backups are stored in a special type of container called a sparsebundle.
You can set up Time Machine to back up to the drive connected to the Time Capsule.......but Time Machine will not continue to back up to the same file that was being used when the drive was connected directly to your Mac. Instead, Time Machine will make a new, complete backup and then continue to back up incrementally once the first "master" back up is done.
Obviously, this will require quite a bit more space on the hard drive, since you will have two sets of backups on the drive.
If you want to "see" the backups that were made when the drive was connected directly to your Mac, you will need to connect the drive directly to your Mac and access them that way. -
Time Machine unable to auto-detect Time Capsule as Backup Disk
Hey all!
I just got my new 500GB Time Capsule today. I'm able to connect to my wireless network via TC but am unable to back up any of my computers (2 MacBooks, 1 iMac) through Time Machine onto TC. In fact, Time Machine doesn't even auto-detect my TC. I've just updated all my software. I haven't checked if my MacBooks are able to print wirelessly via TC yet.
Anyone able to help?
Picture of what I see when I open my Time Machine preferences:
http://i99.photobucket.com/albums/l319/chuyun-/Picture1.pngFile Sharing was already enabled when I went to AirPort Utility to check, and the Time Capsule disk wasn't visible under Shared. Thanks so much anyway skorpien, your help was much appreciated (:
I called up Apple Support and it's all fixed now, including the printer (:
So just in case anyone ever encounters the same problem as me, here's what the friendly guy said over the phone:
1. Go to System Preferences (Apple Logo/System Preferences)
2. Click on Time Machine and switch it on, a window prompting you to choose a Backup disk should appear.
3. If your Time Capsule isn't listed, click on "Set Up Time Capsule". (If that option isn't available, update your software before trying again)
4. The AirPort Utility window should appear with your Time Capsule listed on the left. Click on your Time Capsule, and then on "Continue".
5. Enter your Time Capsule Password, verify it, and then click on Continue" again.
6. If you already have a wireless network (like me), click on the first option, then continue.
7. If your wireless network requires your router to be connected to the phone line, choose Option 3 "I want to connect Time Capsule to my network using Ethernet to extend my current network or create a second network".
8. A list of previously used networks will appear. Choose the one you would like to extend (i.e. the wireless network you use at home if your Time Capsule is for home use).
9. (Because I'm currently backing-up my data, I'm unable to give exact instructions from that step onwards as it'll disconnect my back-up. Sorry!)
Finish up the last few steps (they're quite self-explanatory), and go back to your Time Machine preferences (Apple logo/System Preferences/Time Machine)
10. Switch the Time Machine on again, the window should appear again with your Time Capsule listed.
11. Click on your Time Capsule and then on "Use for Backup"
12. Your Backup starts (:
As for printing, once you've done the above steps...
1. Go to Airport Utility (Applications/Utilities/Airport Utility)
2. Double click on your Time Capsule, then click on Printers.
3. If your printer is switched on and connected to your Time Capsule, it should be detected automatically.
4. Click Update and you're done! (Do the same for all other computers you want to print wirelessly with) -
Using Time Machine Backup Drive with NEW Macbook Pro
I just got a new Macbook Pro. I migrated from my old MacBook Pro. Now I want to use my Time Machine Disk with this new machine.
When I connect the external drive, and select back up now, it says there is not enough space (due to the fact this is a new machine and it wants to backup the entire thing)
Also, when I go into the TimeMachine, it doesn't show me anything past today. . . all of my backups are not displayed over the past year. . .
How do I make it so that the external drive displays all my old backups. . . ??
Thank you for your help.Turn off TM or set the backup drive to null. Rename your computer in Sharing preferences to the same computer name of your old computer. Turn TM back on and reselect the backup drive. TM will behave as you expect. Of course if the file dates on the new machine are all changed since the migration, then TM will correctly assume that they require backing up. You will then find that there will not be sufficient space on the drive for the new backups. If this occurs then you should simply erase the backup drive and start your TM backup anew.
-
Time Machine Not Compacting SparseBundle on Time Capsule
Hi
I am running Snow Leopard 10.6.4 and have a time capsule to hold my iTunes Library and act as my Time Machine repository.
I'm experiencing the problem where Time Machine has filled up my 1TB Time Capsule, and will not back up any more.
I can see that Time Machine has tried to delete some old backups in order to create space - in fact it's deleted ALL my old back ups bar one, probably due to the fact that in deleting each old back up has not released any more space on the Time Capsule as the Sparse Bundle is still massive.
I have done some research and can see that other people were having this issue back in 2008 - so I thought it would have been resolved by now! I thought Time Machine was supposed to compact the sparse bundle image once it had deleted an image these days - but it doesn't seem to have happened.
Can someone tell me if there is some setting I need to select?
I might as well delete the current sparsebundle and just start again - so I don't want to find myself in the same situation in X months time!
Many thanks
DarrenOk here is the log from last night :
Last message before I read the forums looking for answers:
Starting standard backup
Network destination already mounted at: /Volumes/Data-1
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Data-1/Darren MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Node requires deep traversal:/ reason:must scan subdirs|new event db|
Starting pre-backup thinning: 72.04 GB requested (including padding), 41.95 GB available
No expired backups exist - deleting oldest backups to make room
Error: backup disk is full - all 0 possible backups were removed, but space is still needed.
Backup Failed: unable to free 72.04 GB needed space
Backup failed with error: Not enough available disk space on the target volume.
Ejected Time Machine disk image.
Ejected Time Machine network volume.
Rebooted machine and started Time Machine :
Starting standard backup
Attempting to mount network destination using URL: afp://Darren%[email protected]/Data
Mounted network destination using URL: afp://Darren%[email protected]/Data
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Data-1/Darren MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Node requires deep traversal:/ reason:must scan subdirs|new event db|
Compacting storage: 72.04 GB requested (including padding), 41.95 GB available before compacting
Stopping backup.
Backup canceled.
Ejected Time Machine disk image.
Compacting backup disk image to recover free space
Network destination already mounted at: /Volumes/Data-1
The next back up was sucessful!!! :
Starting standard backup
Attempting to mount network destination using URL: afp://Darren%[email protected]/Data
Mounted network destination using URL: afp://Darren%[email protected]/Data
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Data/Darren MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Waiting for index to be ready (101)
Node requires deep traversal:/ reason:must scan subdirs|new event db|
No pre-backup thinning needed: 72.05 GB requested (including padding), 300.83 GB available
Waiting for index to be ready (100)
Copied 27.5 GB of 57.9 GB, 4205 of 4205 items
Copied 57.0 GB of 57.9 GB, 7796 of 7796 items
Bulk setting Spotlight attributes failed.
Copied 8157 files (57.9 GB) from volume Macintosh HD.
No pre-backup thinning needed: 2.85 GB requested (including padding), 244.19 GB available
Copied 598 files (7 KB) from volume Macintosh HD.
Starting post-backup thinning
No post-back up thinning needed: no expired backups exist
Backup completed successfully.
Ejected Time Machine disk image.
Ejected Time Machine network volume.
I can't get back to some of the earlier logs as the widget crashes and takes down the whole dashboard with it! However I think I remember seeing some messages that stated that it couldn't compact the drive as it was already mounted.
I do use the drive to store my iTunes library as well - so perhaps I had mounted the drive when it ran out of space, and hence it's decision to try and remove all the previous backups.
Perhaps this is a good time to think about creating a disk image on the TC for TM to use so I can keep the backups separate from the other data.
Should I create a disk image and store all the iTunes data in it and let TM use the standard TC or vice versa and create an image for TM to use and then use the native TC for data - or does it not make any difference at all?
Cheers for your help
Darren
Maybe you are looking for
-
I've tried EVERYTHING suggested in this link (http://blog.timolthof.com/outlook-no-default-mail-client-error/) and everything google and bing and still this message keeps popping up. Now when I do a windows search for email, I'm not able to view the
-
for example...i will go to a restaurant website that has a menu. to view the menu i first have to click on the downloadable menu pdf file...after i click on it, a window appears showing i have downloaded the file...but, when i go to open the pdf, i g
-
How do you determine weblogic.system.executeThreadCount
we r doing load testing a web based application with the following setup. Two 1 Gb Ram servers, one hosting Database(oracle 8i) server and the other hosting Weblogic5.1 + Apache server. The system is stable upto 90 concurrent users. with response tim
-
Hello, during my message mapping i need to call a Database in Order to select dynamically a value for the destination field. I need to know whether Is this possible with message mapping at all, and if so, what are the basic stepts to this <i><b>withi
-
LOSING IT: "Image Loading" from a DVD is NOT!!
I don't know what's the deal. Aren't we supposed to have our photos anywhere? That's how Aperture is being marketed right? How come I can't edit my referenced photos from a DVD? I import them fine and during the import it seems I can edit the photos.