Time machine migration won't work

I recently got my 1st imac. Unfortunately it never really work properly and ended up needing a new hard drive. I have a time machine back up, but every time i try to either use the migraion assistant or put it back on at the initial set up stage it stars to put everything back on... but gets to saying copying the applications support files and just freezes. Is there anything i can do to make it work?

I would guess your old TM backups are corrupted.
Try using it without migration Applications - just migrate users. If that doesn't work you can still restore individual files from it but probably not using Migration Assistant. to restore individual files use TM in the browse mode. control-click on TM in the dock and select "browse other TM disks". this will let you browse your old backups and restore what you need. If you can't use MA to migrate even users, use the following link as a guide on migrating your user data manually
http://discussions.apple.com/message.jspa?messageID=6185507

Similar Messages

  • Error "The Connection Failed" in Time Machine, Migration Assistant and Restore From DVD

    I am receiving this error when trying to connect to my Time Machine Backup in my Time capsule. I input the proper password to access my Time Capsule and It returns me to the screen with the caption "The connection failed" under the Time Capsule name in the "Select your Disk" screen. What would cause this error. I am connecting via WIFI (AirPort) and have full signal. I am using Mac OSX 10.6.8
    I recently had my 1TB hard drive replaced and I am attempting to restore using Time Machine, migration assistant or from the startup dvd (tried multiple ways, no success). The initial setup of mac OSX 10.6 would not let me connect or other attempts after erasing hard drive and reinstalling OSX from disk.
    Worked on it all weekend and don't have enough beer to drown the frustration, any help is appreciated.

    You are correct TM is not at all easy to do a full restore.
    To answer your question: Yes TM disk does show up in finder.
    After my initial startup setup I was able to start TM and access all my previous backups. I migrated some files and was able grab the data from finder. Not satisfied with that I tried to do a restore to that previous date, to no success. I then erased the HD and reinstalled OSx and tried again from the setup screen. That didn't work, sulked over some beers. I then tired with Migration assistant...same result (more beer).
    In starting TM after trying MA, only one backup was showing in the Star screen (today). None of my previous backups were showing. Since exiting TM it has been "Making Backup Disk Available" ( xGB of 6.29GB). Considering the size, I can only assume that these are my previous backups.
    I have reviewed Pondini's posts, FAQs, and tutorials. I am a little scared to try and locate the drives through Terminal as in Pondini's TS #6 guide. If I can get my previous backups to show up, I will be happy with dragging files from Finder to restore my data and slowly work at restoring my settings/applications.

  • Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.

    Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can;t see a symbol for address book.

    Where are addresses kept on MAIL?  I don;t like the new format at all. Frances
    Begin forwarded message:
    From: Frances Topping <[email protected]>
    Subject: Re: - Old computer I had is OSX Snow Leopard with Entourage. New one is OSX Mavericks. Using Mail where are my addresses and old address book. Transferred old computer backup by Time Machine and other things work? Can't see a symbol for address book.
    Date: August 25, 2014 at 9:46:01 AM EDT
    To: discussions-replies <[email protected]>
    Old Entourage is POP and new Mavericks MAIL  is IMAP I believe. I don;t know how to export in the forms you mention. Frances

  • Time machine automatic backup not working.

    I have just setup my time machine backup and it works fine when I initiate manual backups. but i have noticed that, after every hour auto backup doesn't start. i can always do a manual backup, but for some reason next backup time is increased by an hour every time for auto backups. there are no error messages. Can you please help me with this. I am on os X mavericks.
    I also checked the system logs after seeing some other topics and I only see messages about manually started backups there.

    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
    Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
    CLEAR THE WORD "Starting" FROM THE TEXT FIELD
    so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Time Machine options are not working. I am unable to schedule automatic backups.

    Time Machine options are not working. I am unable to schedule automatic backups.  The On-Off button is grayed out. I can perform a backup manually.

    Thanks for responding.  I have an external disk with plenty of room.  It is used only for backup of my computer.  I get a backup by clicking on the Time Machine icon at the top of the page and select "Back Up Now."  When I click on Time Machine Preferences, there is a box labeled "Options" which allows me to exclude items from backup and notify after old backups are deleted.  There is no option to schedule a backup.  The "OFF/ON" box is gray.  For "Next Backup:" it says "Automatic backups off."  I would like to turn it on.

  • HT201250 My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can't be copied onto the backup disk because it appears to be read-only. How do I fix it?

    My time machine back has been working perfectly well until yesterday when it failed. The error message I get is Files can’t be copied onto the backup disk because it appears to be read-only. How do I fix it?

    Hello,
    http://pondini.org/TM/C6.html

  • Had to reinstall lion and now when i try to use time machine it won't show me any dates.

    Had to reinstall lion and now when i try to use time machine it won't show me any dates. I hit the arrows but nothing happens. it says the backup is to big.

    Only download Firefox from Mozilla:
    *https://www.mozilla.com/en-US/firefox/
    *http://www.mozilla.com/en-US/firefox/all.html
    If you are having a problem getting a "good" download
    *Do not use a download manager when downloading; the download provided with IE is OK
    *Your system security settings might be set too high or your AV/AS application might be interfering. See:
    **https://support.mozilla.com/en-US/kb/unable+to+download+or+save+files
    **http://kb.mozillazine.org/Unable_to_save_or_download_files

  • Time machine still doesn't work with 10.5.2

    After loading 10.5.2 I find that Time Machine still doesn't work with a new Airport Extreme Base Station (AEBS) and USB drive although I was reassured by my local Apple retail store that the fix was in the update. I should have known better. <Edited by Moderator>

    Can you explain what archive and install is please?
    I am having the same problem. Automator as soon as it starts crashes.
    I have tried reinstalling from the OS disk, repairing permissions and none of them work.
    Many Thanks
    Dafydd

  • Yeah. Got a time machine backup, should that work? Thanks.

    Yeah. Got a time machine backup, should that work? Thanks.

    You can schedule backups in CCC for whatever you like. I run two CCC clones on separate disks - a weekly backup and a daily backup. You could have an hourly backup too, if you wish. You can choose to back up on some days and not others (e.g., you might not do any work on the weekend, so see no point in having a backup schedule run on those days. In this regard, CCC is far more flexible than TM.
    It's also more versatile in the backup options it will allow you. Once you've restored your system to the good, I would forget about only cloning your User account, and clone your entire internal disk. This is what most people do I believe, because not only will this copy everything (literally, clone your disk) unlike Time Machine (which skips certain items), it will also make your backup bootable (again unlike Time Machine).
    That menas if your internal disk ever goes kaputt, or you wreck your system with an update or upgrade, you can simply boot back into your system in minutes by connecting the clone.
    About the only advantage I see that TM has over a bootable clone is the 'star wars/versions' type interface, which makes restoring individual files much simpler and user friendly than a clone (but since it's not that hard to do it with CCC anyway, that personally doesn't bother me too much). Others on this board will argue that TM is faster (not in my experience) and causes less wear on your drive (mines happily going 3 years later, but there's no way to empirically test this claim, AFAIK).

  • My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.

    My brand new back up drive is connected but now time machine has disappeared after working perfectly for a week. - no icon, not appearing as an option to save to - have rebooted everything a few times.

    It's not clear whether you were able to do any backups to this drive at all.  If not, it's probably not formatted properly.  See #5 in Time Machine - Frequently Asked Questions for instructions.
    If you did get any successful backups, there may be a problem with the drive, or the backups may be corrupted.  Try to repair the backups, per #A5 in Time Machine - Troubleshooting.

  • Aperture won't launch after Time Machine Migration

    After a hard drive failure, I've just got my system all restored from a Time Machine backup, but when I try to launch Aperture it just fails.
    Not sure whether there's something obvious I'm not doing, or whether I need to reinstall. The library package etc all seems to be where it ought to be.
    Any ideas welcomed!
    Thanks.

    Thanks - that fixed it nicely.

  • Restore from Time Machine / Migration Assistance Utility

    Sorry if this is obvious, but just want to restore wo further user complications.
    _Back story:_ 2006 iMac running Snow Leopard won't boot. Genius Bar determines HD needs reformatting. Reformats and installs OS v10.5.7, not Snow Leopard. Explained to follow new setup and when prompted select from Time Machine (external HD) and restore. At home I do, it won't. Everything is recognized (External HD, Time Machine, File), but tells me OS on machine older than Time Machine files and to upgrade iMac (and can try again from Migration Assistant Utility).
    Continue with prompted new setup and created User Account. iMac now ready and like new. Installed Snow Leopard. Run Migration Assistant Utility and select restore from Time Machine.
    Issue: External HD recognized by iMac but not by Migration Assistant Utility. Only selection choice is internal HD. Additionally when connecting external, always get prompted (separate prompt from Migration Assistance) if I want to setup Time Machine and I've been declining. Do I have to set up Time Machine before? It didn't require that when doing new user setup.
    Thanks for any and all assistance.

    Chad Krukowski wrote:
    Than you! that is what I wanted to do, a full restore. Unfortunately was following the direction of the genius bar.
    Yup. The Geniuses (like most Apple folks) don't actually use Time Machine on their work computers, and aren't real familiar with it, so this sort of thing isn't all that unusual, unfortunately. You could even have gotten similar advice from AppleCare, depending on the expertise of whoever you happened to get. Sigh.

  • Time Machine Migration Assistant HELP!

    My MacBook Air has a whole lot of storage that is being used for who knows what.
    I am going to back up my mac, erase it, and reinstall the backup because that seems to work. But, I have no idea what the differences and similarities in Time Machine and Migration Assistant is. Can I use migration assistant to back it up and reinstall on the same computer? If not, how do I install a time machine backup on a compeletely erased mac? (I'm on OS X Mavericks)

    Before you do anything else, I strongly suggest you figure out what's taking up the space.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take a few minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • Mac air with external hard drive - not being found on Finder, Time Machine, Migration Assistant

    I have been using an external drive (Imation Apollo) to access only, old files from previous computer (PC) on a new Mac Air.  I had not transferred them across to new computer (didn't want to do that)  just accessing them from the HD.  It had been working fine until recently.  Each time the external drive had been connected Time Machine would come up and ask if i wanted to use this drive for back ups, and I always chose 'Decide later'.  So, as yetI hadn't as yet configured Time Machine to do back ups.
    Recently I noticed that the extrnal HD was no longer showing up on Finder.  Slight panic as i have 5 or 6 yrs of work saved on that HD
    Further investigations - it's also not showing up either on on Disk Utility, or on Migration Assistant.
    I've done the following: 
    Tried HD in each of different USB ports  - made no difference, HD still not showing up
    Tested different Hubs in each port with HD attached - no difference HD not showing up
    Tried USB flash drives in the USB ports - These are working fine and show up on finder
    Tried the HD on other comptuters (a PC though, don't have access to another mac to do this test)- working fine, the HD is showing up and is accessable
    Interrogated the Console logs to try to see if the act of attaching the HD creates a log entry - couldn't find anything
    Rebooted computer via shut down, power disconnect - no difference
    Reset PRAM - no difference still not showing up
    Reset SMC - no differnce still not showing up
    So I think I have established that all the USB ports are functioning correctly and able to access other external drive devices, using hubs with external powersource is not the issue, identified that the external hard drive is working OK, and it appears that the Mac itself is functioning normally.
    What would be the reason the Mac now does not allow this specific external HD to be identified and accessed.  The only possible things I can think of are
    if I had in fact pressed 'Do not use' when Time Machine asked 'do you want to use this drive for back ups'.  Would that mean that the Mac now totally rejects this HD from being a source of accessible files - I hope not!
    I also think that my husband may have disconnected the hard drive from my computer to access some stuff and he just yanked it out rather than use the safe eject method.  Could this create an issue?  The Hard drive works fine on his PC.
    Why is my Mac Air now rejecting this HD and what can I do to access my historical files now. 
    Any assistance anyone can provide would be very greatly appreciated!
    Thanks
    Anna

    I can't answer why it isn't accessing it, but I have a slightly related issue w my back up drive starting to get noisy.
    Realizing that redundancy is safety for critical data.  I talked to my brother about my situation the other day & he said he has 3 small Western Digital portable HDs that he rotates for backup. He even keeps 1 in the safe deposit box.
    I have read for some time that we should have multiple back ups & also have our critical stuff backed up off site. Amazon HD reviews had a woman telling about how she was very backed up on multiple computers & hard drives, but they were robbed or burgeled & all of them were stolen including her thesis that was on the computers.
    Hard drives aren't that expensive. I just bought a new Western Digital 1 TB drive for $89.99. I plan to use it to back up the Seagate that is getting noisy & then maybe alternate them.
    Also, when I came back to Mac, I moved practially all of my documents to Mac. I think I just dragged & dropped or something. Photos, Office, & pdfs do fine that way. & then you could back them up to a couple of different external drives & remove from your MacBookAir.
    Unfortunately I think most of us do not back up until crisis & then it may be too late.
    Also use Time Machine. For the 1st time in my computer life, my computer is well backed up--although now realizing the need for redundancy so will start backing up to at least 2 different HDs alternatly.
    So, not sure why it isn't working & hopefully you have come up w a solution by now.
    I think what I would do in a situation like this, since you can access it on the Windows machine would be to transfer the data to the Windows machine & then transfer it back to a different back up.
    I'm looking into backing up what I still have in Windows using a thumb flash drive. I think it should all fit ok now that they have the larger drives & I don't have very much left in Windows format.

  • Kext cleanup, now time machine and itunes not working

    I cleaned up all my kext files from Sep 2013 back (as suggested in an article) to address the kernel_task overload, but now itunes won't play (play button works but songs do not move forward), time machine will not restore backup and no audio comes from google chrome. Do I need to reinstall each individual program/application? Will a reinstall of Mavericks work?

    The article was written by an idiot.
    If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
    If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault startup volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main Recovery screen.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
    *The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Maybe you are looking for