Time Machine not opening after Snow Leopard 10.6.3 install

The install from Leopard 10.5.8 seemed to go well but I'm unable to open Time Machine now...I get this error message:
The operation can't be completed
An unexpected error occurred (error code -43)

Alls lost wrote:
I upgraded from Leopard to Snow Leopard on my existing MacBook. I'd never done any work on Time Machine on the old version outside of opening it and am obviously completely ignorant of the entire application.
I'm still not clear -- had you done any backups while you were on Leopard?
I wanted to start using it and am receiving that error message when I try to open it so I can't get into it to do any manipulation...etc. Maybe my best bet is to go to an Apple store and get some basic help with it including reloading.
I'm still not clear on what's going on, but I don't think you need to reload anything.
If you've never done any backups, then you won't see anything when you click the Time Machine icon in your Dock.
If you want to start using Time Machine, you'll need an external HD, or perhaps a Time Capsule, for Time Machine to store the backups on. You set that up via +System Preferences > Time Machine.+ Once there are some backups, you should be able to view them via the Time Machine application.
You might want to review the [Time Machine Tutorial|http://www.apple.com/findouthow/mac/#timemachinebasics] and perhaps browse [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
Then post back with any questions.

Similar Messages

Time Machine not backing after Snow Leopard

This seems one that hasn't been encountered yet.
After installing SL, Time Machine apparently works fine and doesn't report any problems. 'Last Backup' time always fine, icon revolves etc. Problem is that even going back 1 hour goes back to the day SL was installed. Backing up to the same USB disc as previous - under 10.5.x always fine.
Any ideas?

JonSeph wrote:
Hi James - I realised the error in Carolyn's file path, so it was the 'right' prefs file I deleted. Should have mentioned that.
Here's the log from last backup using +Time Machine Buddy+.
"Starting standard backup
Backing up to: /Volumes/TM Backup/Backups.backupdb
No pre-backup thinning needed: 676.2 MB requested (including padding), 640.59 GB available
Copied 135 files (109 KB) from volume Macintosh HD.
No pre-backup thinning needed: 677.1 MB requested (including padding), 640.59 GB available
Copied 10 files (93 bytes) from volume Macintosh HD.
Starting post-backup thinning
Deleted backup /Volumes/TM Backup/Backups.backupdb/JonSeph MacBook Pro/2009-09-16-113240: 640.59 GB now available
Post-back up thinning complete: 1 expired backups removed
Backup completed successfully."
All seems fine, but no backup made of any new files!
Yes, just not finding anything changed. What's in the +Do not back up+ box in TM Preferences > Options, and what's the "Estimated size of full backup? just below it?
Are you running File Vault?

AE CS4 Will not open after Snow Leopard Upgrade

Ok, i posted this earlier but I don't think I was clear enough to get an answer. I recently did a clean install of Snow Leopard and a fresh install of my Production Studio CS4. Upon getting it all installed, I realized that After Effects will NOT open at all. It just bounces on the Dock a few times and then stops. Then after that, when you click on it, it bounces once, then stops. Every other program works great, only after effects is not working. Why is this? Is there something I need to do? I reeinstalled just the AE and downloaded the newest update, still, the same thing. I would appreciate any suggestions to get it running.

I experienced this when upgrading to Snow Leopard myself.
After Effects is one of many, many applications which require Rosetta to be installed. In Snow Leopard, Rosetta is an optional install on the disk. So just make sure you install it.
Now, the thing also is that once Rosetta is installed, the OS still seems to have AE flagged as an app which requires a missing component to launch. This was fixed after a couple of restarts, in my case.

Time Machine not visible from SNow Leopard

I have a Time Capsule that has been performing sterling duty on my iMac and Macbook for the past couple of years.
Having just upgraded the Macbook to Snow Leopard I set it to backup for the first time (>60 GB) which took a day or so over Wifi - at this point the backup was visible and browsable.
After the backup the time capsule is visible in the Finder and I can see the sparsebundle, however the preferences suggest that I need a new backup and I cannot enter Time Machine.
The iMac, still running 10.5.8, can still see it's own backups.
There is approx. 250GB left on the Time Capsule.
Any help?

JonSeph wrote:
Hi James - I realised the error in Carolyn's file path, so it was the 'right' prefs file I deleted. Should have mentioned that.
Here's the log from last backup using +Time Machine Buddy+.
"Starting standard backup
Backing up to: /Volumes/TM Backup/Backups.backupdb
No pre-backup thinning needed: 676.2 MB requested (including padding), 640.59 GB available
Copied 135 files (109 KB) from volume Macintosh HD.
No pre-backup thinning needed: 677.1 MB requested (including padding), 640.59 GB available
Copied 10 files (93 bytes) from volume Macintosh HD.
Starting post-backup thinning
Deleted backup /Volumes/TM Backup/Backups.backupdb/JonSeph MacBook Pro/2009-09-16-113240: 640.59 GB now available
Post-back up thinning complete: 1 expired backups removed
Backup completed successfully."
All seems fine, but no backup made of any new files!
Yes, just not finding anything changed. What's in the +Do not back up+ box in TM Preferences > Options, and what's the "Estimated size of full backup? just below it?
Are you running File Vault?

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

Firefox will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

will not open after installation. i have tried to install several times with the same results. installation sends a list to firefox each time. need help. willard lee

Can you attach a screenshot or link to the instructions you are following?
You are on the 3.6 release and Firefox 7.0.1 is out. You can download and install the latest release from http://www.mozilla.org/en-US/firefox/new/ if you would like to update now. The 3.6 version will be maintained for a while longer, but you should update when you can.

I had to restore my 2006 MacBook Pro back to factory settings (Tiger 10.4). Can I use my Time Machine back up from Snow Leopard to put it back the way it was?

I cannot locate my Snow Leopard disks but I was able to use the Tiger disk that came with the computer to restore it. However, it completely erased it and set it back to Tiger. Can I use my Time Machine to put Snow Leopard and my data back on the computer?

You can't restore a Time Machine backup made with Snow Leopard onto a system with Tiger. You can, but you will damage Mac OS X.
In order to restore your Time Machine backup, you should have your Snow Leopard disc. Then, insert it and hold the C key while your MacBook Pro is starting. Finally, choose your language, go to Utilities menu (on the menu bar), choose the option to restore the backup and follow its steps, so you will recover Mac OS X Snow Leopard

OS will not boot after Snow Leopard Upgrade

I have a MacPro (Intel). I just upgraded to Snow Leopard and everything appeared fine. However, after restarting my computer the OS will not load. A circle with a hash through it replaces the Apple logo and the apple's spinning wheel continues but all drive activity. I have tried to run the install again by forcing the computer to open the dvd drive then booting for the OS DVD but this has not worked. Has anyone experienced this and successfully resolved?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Macbook pro will not boot after snow leopard upgrade

My GF has had a macbook pro since mid 2008. It's been running like a champ since I've known her for the past 3 years with no issues. It has/had OSX 10.5.8 installed. We tried to consolidate all our pictures from all our apple devices and realized she didn't have an icloud on the old 10.5.8 OSX. So I called apple and they told me to order and install the snow leopard OSX 10.6 first and then upgrade to lion etc after that, Well we got the disk yesterday popped it in to install and it's been a disaster.... the computer shutdown for what looked like a normal restart during the installation process and never booted back up. Attempts to manually reboot leave us locked on a grey apple logo screen with spinning gear indefinately whith the Snow Leopard disk installed during boot up. With the disk removed I get the flashing file folder with a question mark. I called apple support we tried all the PRAM and SMC resets and then decided that we should go to the Genius Bar once all those failed. After an hour and a half drive to the nearest genius bar we were told that the we suddenly had a hardware issue which just happened to coincide with the new OS installation.... I'm not buying it and am looking for some help. The macbook was running like a champ until we inserted a disk recommended by apple... Any takers?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Time Machine Not Recognized After Clean Snow Leopard Install

I've searched for this particular question.
I was unhappy with Snow Leopard dragging. I wanted a clean install. I did not have the original snow leopard installation for my computer, so I got a different snow leopard DVD. This has apparently caused problems with time machine.
The clean install in complete. I am now ready to migrate my Time Machine backup onto my iMac24". However, Time Machine is not recognized--at least not in the way I want.
When I plug my time machine HD into the USB, snow leopard asks if I want to use this for future back-ups. I decline, because I specifically want to restore what has already been backed up. The HD is visible as an external device--and I can in fact see the raw data of my time machine backup stored in folders.
However, when I enter migration assistant, time machine is invisible. On the page where I am expecting to select time machine, I instead get a perpetually spinning circle icon.
I suspect time machine is "linked" to the prior snow leopard operating system, rather than to the computer ID. Obviously, this is a bit of a mistake on my part. However, I'm already into the breech and I've got no choice but to go forward.
Please advise how to redirect my time machine to its new master (same computer, different snow leopard registration)?
Thanks so very much.

Retail disk? Yes, it was the snow leopard CD.
I used a single license snow snow leopard CD install the first time around, when snow leopard was first released. At at that time I "upgraded" my system from leopard.
This time, I used a different physical disk with snow leopard with a family license. This time I did a "clean" install in which I first erased my hard drive using disk utilities.
There were no problems with the installation.
As I say, my time machine hard drive is "recognized" by the computer as an external drive. It just is not recognized when I utilize the migration assistant. It is also "recognized" as a time machine, but only as a potential time machine for prospective use to update going forward, whereas I want it to open up as a time machine for my iMac that I just wiped clean yesterday.
Thanks for your assistance.

Time Machine will not backup after Snow Leopard.

Pertinent information:
Macbook Pro pre-aluminum body
Time Machine backing up over network to a ppc mini with 500 gb external drive.
This worked fine with Leopard for over a year. I installed Snow Leopard last week and this is the first time I got a chance to try a Time Machine backup. Doesn't see to want to backup no matter what I do.
I tried:
- Renaming the sparsebundle
- Disconnecting/reconnecting the external drive.
- Re-selecting disk in Time Machine config and nothing works.
- Even ran Verify Disk and Repair Disk on the external drive. Found a header error, but Disk Utility said it was minor and fixed it.
It seems that Time Machine isn't even trying to figure out what needs to be backed up. Here is the log. Below this snippet of the log I will post some of the other things I see...
09/12/2009 - 7:01PM Sep 12 2009 7:01:31 PM com.apple.backupd[5688] Starting standard backup
09/12/2009 - 7:01PM Sep 12 2009 7:01:31 PM com.apple.backupd[5688] Attempting to mount network destination using URL: afp://[email protected]/Backup
09/12/2009 - 7:01PM Sep 12 2009 7:01:31 PM com.apple.backupd[5688] Mounted network destination using URL: afp://[email protected]/Backup
09/12/2009 - 7:01PM Sep 12 2009 7:01:31 PM com.apple.backupd[5688] Warning: Destination /Volumes/Backup does not support TM Lock Stealing
09/12/2009 - 7:01PM Sep 12 2009 7:01:31 PM com.apple.backupd[5688] Warning: Destination /Volumes/Backup does not support Server Reply Cache
09/12/2009 - 7:01PM Sep 12 2009 7:01:33 PM com.apple.backupd[5688] Disk image /Volumes/Backup/mbphome_001ec2038641.sparsebundle mounted at: /Volumes/Backup of mbphome
09/12/2009 - 7:01PM Sep 12 2009 7:01:34 PM com.apple.backupd[5688] Backing up to: /Volumes/Backup of mbphome/Backups.backupdb
09/12/2009 - 7:01PM Sep 12 2009 7:01:36 PM com.apple.backupd[5688] Event store UUIDs don't match for volume: Macintosh HD
09/12/2009 - 7:01PM Sep 12 2009 7:01:38 PM com.apple.backupd[5688] Node requires deep traversal:/ reason:must scan subdirs|new event db|
09/12/2009 - 7:01PM Sep 12 2009 7:01:47 PM com.apple.backupd[5688] Stopping backupd to allow ejection of backup destination disk!
09/12/2009 - 7:01PM Sep 12 2009 7:01:47 PM com.apple.backupd[5688] Backup canceled.
09/12/2009 - 7:01PM Sep 12 2009 7:01:47 PM com.apple.backupd[5688] Failed to eject volume (null) (FSVolumeRefNum: -138; status: -36; dissenting pid: -1)
09/12/2009 - 7:01PM Sep 12 2009 7:01:48 PM com.apple.backupd[5688] Ejected Time Machine network volume.
Notice the:
Destination /Volumes/Backup does not support TM Lock Stealing
and:
Destination /Volumes/Backup does not support Server Reply Cache
Does anybody know what that means?
I also see this maybe every third time I try a manual backup. There are many more lines, I'll post a few for you to get the gist:
09/12/2009 - 6:49PM Sep 12 2009 6:49:36 PM com.apple.backupd[5560] Error: (6) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Backup of mbphome/Backups.backupdb/mbphome/2009-08-16-173353
09/12/2009 - 6:49PM Sep 12 2009 6:49:36 PM com.apple.backupd[5560] Error: (6) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Backup of mbphome/Backups.backupdb/mbphome/2009-08-20-192750
09/12/2009 - 6:49PM Sep 12 2009 6:49:36 PM com.apple.backupd[5560] Error: (6) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Backup of mbphome/Backups.backupdb/mbphome/2009-08-27-220252
09/12/2009 - 6:49PM Sep 12 2009 6:49:36 PM com.apple.backupd[5560] Error: (6) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Backup of mbphome/Backups.backupdb/mbphome/2009-09-09-013744
Can't really find any info on any of these errors. I search through discussions and it doesn't seem that anybody is having the same problems as I'm having, seems they are having different problems.
Thanks in advance for any kind of information you can provide on this problem.

Unfortunately a "full reset" didn't do it. The log looks almost exactly the same...
09/12/2009 - 11:26PM Sep 12 2009 11:26:47 PM com.apple.backupd[1141] Starting standard backup
09/12/2009 - 11:26PM Sep 12 2009 11:26:47 PM com.apple.backupd[1141] Attempting to mount network destination using URL: afp://[email protected]/Backup
09/12/2009 - 11:26PM Sep 12 2009 11:26:48 PM com.apple.backupd[1141] Mounted network destination using URL: afp://[email protected]/Backup
09/12/2009 - 11:26PM Sep 12 2009 11:26:48 PM com.apple.backupd[1141] Warning: Destination /Volumes/Backup-1 does not support TM Lock Stealing
09/12/2009 - 11:26PM Sep 12 2009 11:26:48 PM com.apple.backupd[1141] Warning: Destination /Volumes/Backup-1 does not support Server Reply Cache
09/12/2009 - 11:26PM Sep 12 2009 11:26:50 PM com.apple.backupd[1141] Disk image /Volumes/Backup-1/mbphome_001ec2038641.sparsebundle mounted at: /Volumes/Backup of mbphome
09/12/2009 - 11:26PM Sep 12 2009 11:26:50 PM com.apple.backupd[1141] Backing up to: /Volumes/Backup of mbphome/Backups.backupdb
09/12/2009 - 11:26PM Sep 12 2009 11:26:52 PM com.apple.backupd[1141] Event store UUIDs don't match for volume: Macintosh HD
09/12/2009 - 11:26PM Sep 12 2009 11:26:54 PM com.apple.backupd[1141] Stopping backupd to allow ejection of backup destination disk!
09/12/2009 - 11:26PM Sep 12 2009 11:26:54 PM com.apple.backupd[1141] Node requires deep traversal:/ reason:must scan subdirs|new event db|
09/12/2009 - 11:26PM Sep 12 2009 11:26:54 PM com.apple.backupd[1141] Backup canceled.
09/12/2009 - 11:26PM Sep 12 2009 11:26:55 PM com.apple.backupd[1141] Ejected Time Machine disk image.
09/12/2009 - 11:26PM Sep 12 2009 11:26:55 PM com.apple.backupd[1141] Ejected Time Machine network volume.
Still confused over the "does not support TM Lock Stealing" and "does not support Server Reply Cache"? Are those the possible causes? I'm really at a loss cause like I said in my reply before, Time Machine just always worked.

Time Machine backup disk not mounting after Snow Leopard upgrade

i recently upgraded from latest version of Leopard to Snow Leopard via retail disk 10.6.3 & then updated combo 10.6.5. Now the TM backup disc will not mount.

Exactly what happens? Do you get a message? If so, what?
Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
If that doesn't help, the backups may be corrupted. Repair them, per #A5 in Troubleshooting.

TIme Machine not working after upgrade to snow lep.

I just updated to snow lep version from lep and now my time machine can't backup. It give an error message of "The backup disk image “/Volumes/Kelly Turner's Time Capsule/Kelly Turner’s iMac.sparsebundle” could not be created (error 22)."
I try to open airport utility and it finds my time capsule, but when chosen, this error message "Make sure your AirPort wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6722)" comes up after a long search to find configurations.
When open time capsule utility, it shows the capsule, but hangs when "making backup disk available" and fails to start backup.
I have had this setup for four years and not problems with connectivity or backups. I can still get on internet using wireless with airport, but the time capsule can't see it.
HELP!

Hi, and welcome to the forums.
It sounds like you need to reset your Time Capsule; probably a "soft reset" is enough. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
You might also need to do a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
Oddly enough, the name of your Time Capsule may be part of the problem. See #C9 in Troubleshooting. Why it sometimes works for a while, then suddenly doesn't, is a mystery.

TS3479 quick time not working after snow leopard install?

Made video's on my iphone and loaded them to my imac. Video did not work in iphoto. No Quick time pop up. what happened? Snow leopard install.

You need to re-install iPhoto because it's missing bits of itself:
Library not loaded...
Reason: no suitable image found.
Looking at the missing files it's possible that it's missing from the OS. But start with re-installing iPhoto, and if that fails you'll ned to re-install the OS.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only...’
Regards
TD

IMPORTANT GUIDE FOR ANYONE WITH AN HP DEVICE NOT WORKING AFTER SNOW LEOPARD

To anyone with an HP printer/scanner device,
After being frustrated with my HP Photosmart C4580 not being able to scan for over an hour (scouring the forums, HP's website etc), I've come to realize my problem. Note that this has only been tested on a device that is plugged in DIRECTLY to your mac. I have not tried this over the network and do not plan to since my house is not set up for that.
Anyone who is having any issues with their device, UNINSTALL the HP software. The software is simply incompatible with SL and will mess up your devices! HP even says so on their website (see link below)!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01846935&cc=us&lc=en&dlc=en &product=1153481
This is easily done by going to your applications folder > Hewlett Packard > HP Uninstaller. After using the uninstaller to uninstall HP's apps from your computer unplug your scanner from your computer and power supply. Now to make sure there are NO printers registered with your computer that could possibly mess up the fresh driver install, go to System Preferences > Print & Fax. Right click anywhere in the left pane (where any printers you have/had installed will be located) and click "Reset Printing System". This will wipe out any traces of a printer so you can start a-new.
Now, restart your computer. After it is restarted, plug your printer into the power source, then when it is fully booted up you may plug it into your USB slot. Then, go to System Preferences > Print & Fax. Click on the "+" (which will give you the interface to add your printer), select your printer (which you should note will say "USB Multifunction" instead of "USB" which is what showed up with the HP software still installed), and click "add". Your mac will do the rest (installing the drivers and such) and you should be able to print & scan as usual.
Note that you will need to scan using Preview, Image Capture, or your Printer Queue due to the changes with Snow Leopard (see the HP link above to learn how to use these). Your device should now properly show up when you use these applications to try and scan now.
-Mike S

@lakewood - there is nothing specifically in Software Update if you upgrade from Leopard to Snow Leopard. For me anyway..seems like thats the case for everyone though.
@ruger - so it won't even let you hit the '+'? For me, I had to hit the '+' to get it to install which in turn automatically downloaded the proper software/drivers for my device. if i were you, i'd see if i could get that to happen and hit '+' to install it. also - make sure you don't have any of the HP software on your computer also (use the uninstaller provided!)..that was really what did the trick for my machine. HP has come out and specifically said to not use the device manager, but that didn't quite do it for me. i had to uninstall everything that came on that CD (its all located in applications > Hewlett-Packard and, like i said, can be uninstalled easily using the provided uninstaller).
if all else fails, what i've also heard helps is just to reinstall snow leopard. that'll make sure everything is fresh. i'd delete all your printers like i outlined in my first post first THEN reinstalling it if you wish to go that route. however, it really does sound like the driver is messed up if its pausing and works fine with time capsule. idk how old the printer is, but sometimes with older models, the support blows. i apologize if none of this helps whatever the reason for your troubles may be, though.
Good luck,
-Mike S
PS: printers are always terrible to upgrade on everyone's end. consumers, operating systems, and manufacturers. it stinks that nothing can be generic and run similarly anymore =/

Time Machine not opening after Snow Leopard 10.6.3 install

Similar Messages

Maybe you are looking for