Time machine not working says MacBook Pro.sparsebundle in use
TIme machine has'nt backed up for over a year. Don't know why it was brougt to my attention by my laptop today. I've tried to restart it ,but it says that the "disk is already in use" or "Heidi’s MacBook Pro.sparsebundle" in use or" try to eject disk image" which I have no clue how to do. Any suggestions?
Did you try to restart the Time Capsule?
Pull the power cord from the back ot the Time Capsule
Wait a few seconds
Plug the power cord back into the back of the Time Capsule
Wait a few minutes and try a backup. If that does not do it, then look here for more information:
The Backup disk image ... sparsebundle ... is already in use.
Similar Messages
-
Time machine not working on macbook pro 10.6.8
My time machine is not working, I want to upgrade to Lion do I need time machine?
Not to upgrade, but you may want to use Time Machine for your regular backup.
How to Install Lion/Mountain Lion Successfully - You must have Snow Leopard 10.6.8 Installed
A. Repair the Hard Drive and Permissions:
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.3.) if DW cannot fix the drive, then you will need to reformat the drive and reinstall Snow Leopard.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to
the Destination entry field.
6. Select the source volume from the left side list and drag it to the
Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the backup volume. Source means the internal startup volume.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before
installing the update unless you will boot from this drive and install the
update on it. Reconnect it and turn it back on after installation is
complete and you've restarted.
2. You may experience unexpected results if you have installed third-
party system software modifications, or if you have modified the
operating system through other means. (This does not apply to
normal application software installation.)
3. The installation process should not be interrupted. If a power outage or
other interruption occurs during installation, use the standalone
installer (see below) from Apple Downloads to update. While the
installation is in progress do not use the computer.
D. To upgrade to Lion/Mountain Lion:
1. Purchase the Lion/Mountain Lion Installer from the Mac App Store.
The download should start quickly. Lion is nearly 4 GBs so a fast
internet connection is essential. Download time could run upwards of 4
hours depending upon network conditions and server demands at the
time.
2. The installer will run automatically after the download is completed.
Click on the Install button to begin the upgrade.
3. Follow instructions for installation.
You may also wish to consider this:
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
the copy into your Downloads folder. Now you can click on the Install button. You
must do this because the installer deletes itself automatically when it finishes
installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
a. Open Disk Utility in your Utilities folder.
b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
side list. Click on the Partition tab in the DU main window.
c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
the process has completed.
d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
list. Click on the Erase tab in the DU main window.
e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
button for Zero Data and click on OK to return to the Erase window.
f. Click on the Erase button. The format process can take up to an hour depending upon the flash
drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
a. Double-click on the InstallESD.dmg file to mount it on your Desktop.
b. Open Disk Utility.
c. Select the USB flash drive from the left side list.
d. Click on the Restore tab in the DU main window.
e. Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
f. Drag the mounted disc icon from the Desktop into the Source entry field.
g. Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
As an alternative to the above (you still have to do your own download of Lion/Mountain Lion) you can try using Lion DiskMaker 2.0 that automates the process of Steps 2 through 4. -
My Time machine won't back up. Recently updated to OS x 10.7.5. Error message is as follows: "The backup disk image “/Volumes/Time Machine Backup/Scott’s MacBook Pro.sparsebundle” is already in use." What is wrong and how do I fix it? Thanks.
Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.
-
How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!
Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format. -
My time machine won't back up....The message reads : The backup disc image"/volumes/(my name)'s time capsule/(my name)'s macbook pro. sparsebundle" is already in use........I'm not using anything else that I know of.....?.......Help!
ATXMacMan wrote:
I use OS X server for maintaing Time Machine backups for several macs
Ah, that's a new wrinkle to me. I haven't tested the Server product, but there are a number of differences. As far as I can tell, the firmware update solved this for most, but not all, users of standard OSX.
Are you still on Snow Leopard server? It's quite different from later versions, I understand.
Have you tried selecting the base station, then Base Station > Restart via Aiport Utility's menubar? That still disconnects everyone, but might work by itself.
Otherwise, sorry, but I'm out of my comfort zone.
Hopefully one of the networking gurus will have an idea or two. -
Youtube videos not working on macbook pro
youtube videos not working on macbook pro?
I just purchased a 13" Mid 2012 MB Pro, first time on YouTube, the videos would not play, google "Adobe Flash", download and install the player and you should be good.
-
imported old computer via time machine into new 2012 macbook pro, but its still running ilife 09 instead of 11?
I am assuming you had iLife 09 on the old computer - when you moved everything over, that came along with it.
I also have older versions of iLife (on install disks) and just recently got a new 2012 Macbook Pro. I noticed that iMovie 11, iPhoto and Garageband (I think) are listed in my Mac App Store Purchases with a notation to "accept". So you might want to check MAS to see if the apps are sitting there.
Now, I have chosen not to accept them for now for two reasons: I have iLife 11 on a disk and prefer that rather than having it tied to MAS/Apple ID and as long as I have my disk version installed, I also still have iDVD which I use a lot. I'm not sure if "accepting" those three from MAS would wipe out my iLife 11 installs including iDVD (which would be unacceptable for me). So, since I already have the latest version, I've opted to ignore the "accept" and, in fact, will leave it like that - if I ever sell this machine, the buyer can then accept them if they want with their own Apple ID. So before accepting the apps (if they are listed in MAS), you might want to check to make sure that your iLife install isn't wiped out - that is, if you have iDVD and want to keep it. -
The backup disk image “/Volumes/Felix Pereira's Time Capsul/Felix Pereira’s MacBook Pro.sparsebundle” is already in use.
Please look over to the right of this page under the heading of More Like This for multiple answers and solutions.
Or, see #C12 in Time Machine - Troubleshooting
http://pondini.org/TM/Troubleshooting.html -
/Volumes/Margaret Cameron's Time Ca/Margaret Cameron’s MacBook Pro.sparsebundle
I got this message today. How do I resolve this?Was it an error message that showed up when your machine was trying to backup to your Time Capsule?
If so, see -> http://pondini.org/TM/Time_Capsule.html.
Good luck,
Clinton -
I recently did a full reinstall from my time machine and now my MacBook pro won't back up to the time machine. It starts a full backup ignoring the original back up, can anyone help?
Did you follow the instructions on the page linked below?
OS X Yosemite: Recover your entire system -
Synchronise time machine from HardDrive to macbook pro
how do i synchronise time machine from HardDrive to macbook pro?
Check this out by Pondini, the resident TM guru here, read thru, and you will most likely find your answer:
http://pondini.org/OSX/Home.html -
Thunderbolt display not working on Macbook Pro - previously the display did work
Thunderbolt display not working on Macbook Pro - previously the display did work
I have upgraded ML but when the MBP tries to restart with the upgrade the MBP does not restart so I susapect the ML upgrade is not complete ? When you refer to 10.8.5 supplemental is this a separate upgrade ? When I connect the Thunderbolt to the MBP the Thunderbolt charges my MBP & I can play music from iTunes via the Thunderbolt. It is only the display that is not working on the Thunderbolt
-
Lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??
lightroom (CC) 2015 is not working with Macbook pro 2015 model ! any clues about it ??
Ahmed
Generally signing out and signing in (signing out and back into the Creative Cloud application ) will fix this. If it isn't resolving the issue for you, let us know what you see and we can try something else.
Pattie -
I have a question. Can I use TM to reset my System Preferences. In hope it would put back what changed back in Nov.
I cannot accesses any files in TM and no error message from TM. Please read Time machine not working posted 19 April. Many thanks.You need to explain just what you mean "not working".
Also, what are you backing-up to?
Check out some of the threads under More Like This at the right of this page. -
I recently bought a new MacBook Pro, and wanted to transfer all the data from my old MacBook Pro, but I get the message saying I need to update time machine on my old one in order to use time machine. However, my old one is too old to update. So I decided to use the cable to transfer, because I heard I can do it that way even though it could take time. But I have no idea what to do...
Can someone help me?A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC System Preference add-ons
All Unsanity Haxies Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5 Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior, TechTool Pro , SuperDuper , and Drive Genius work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
OS X Lion: How to use Migration Assistant to transfer files from another Mac
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
Repair the hard drive and permissions using Disk Utility.
Backup your data. This is vitally important in case you make a mistake or there's some other problem.
Connect a Firewire cable between your old Mac and your new Intel Mac.
Startup your old Mac in Transferring files between two computers using FireWire.
Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder) /Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder) /Home/Library/Mail (copy the whole folder) /Home/Library/Preferences/ (copy the whole folder) /Home /Library/Calendars (copy the whole folder) /Home /Library/iTunes (copy the whole folder) /Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist /Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data Also in /Home/Library/Preferences/Microsoft.
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.Revised 5/21/2011
Maybe you are looking for
-
Screen Fading on Macbook Pro just over a year old
My screen is fading around the edges and a line across the middle of the screen as if the coating is wearing off. I have done nothing but take car of my mac. NO Chemicals no rubbing just a light dusting every now and again with micro fibre cloth I ac
-
A total beginner with Blackberry Playbook
Hello Someone got me a Blackberry Playbook, I certainly accepted the gift even though I wasn't sure what one of these was! However since i got it, I am struggling to connect to wifi?> How can i fix this problem?. I have phoned up the support line whi
-
Passing value to jsp page by clicking a hyperlink
I have a hyperlink in a jsp page1. The hyperlink is for another jsp page2. I have a string value in JSP page1, which I want to pass to jsp page2 when user clicks the hyperlink. Can anyone tell me what will be the suitable way to do this? Thanks.
-
Sometimes I cannot bring up iTunes when I click on the icon. Have even gone to the START Menu and clicked on that icon but it still wont work. The only way I can fix it.....sometimes.....is if I reboot. Please help me 8-) Thanks
-
SQL MAX QUERY / SQL COUNT QUERY
Hi all, i would like to get the value of the number of rows i have, but i dun seem to work it out with the getRow statements. i think the syntax of my statement is ok, but maybe i am doing the wrong way to get the value out. I tried with COUNT, and i