Time Machine "on the cheap."

I'm using the secondary drive in a PowerMac 2.0 (10.5.4 Server) as a 'Time Capsule.' To maximize throughput, I'd like to back up via Ethernet (GigE vs. 802.11g).
I've configured correctly; I can 'see' the designated drive, mount it and even begin a backup. On the server, I can see the .sparsebundle file created and increasing in size until failure... the size immediate reduces to roughly 8MB and Time Machine generates the following error:
Time Machine Error
The backup disk image could not be created.
What am I missing/messing up here?
thanks!
Phoop out.

Probably a silly question, but what format is the Hard Drive on the server (the one that is being backed up to?)
Michele

Similar Messages

  • I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

    I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

    Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
    If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

  • HT201250 Can I restore photo files from Time Machine without the use of an external drive?  I'm trying to restore lost photo files and I see them listed in Time Machine (without use of an external drive), but when I try to restore I get a error code 36.

    Can I restore photo files from Time Machine without the use of an external drive?  While I was transferring photos back and forth from a thumb drive something went haywire and my IPhoto was wiped clean!  When I click on Time Machine I see all the dated pages (without an external storage drive connected), go back to a date where all my photo files are there, click "restore", and I get the message:  "The Finder can't complete the operation because some data in file cant be read or written (error code - 36)"

    Thanks so much Terence.  I tried some of the fixes from that page, but then discovered the suggestion to compress the Time Machine Back up of the original library and transfer it as a zip back to my computer as detailed here:
    http://pondini.org/TM/E9.html
    That worked like a charm.  I really appreciate it. 

  • How do I retrieve iphoto library from Time Machine when the Mac doesn't have enough memory

    Is there a way to retrieve (or view) specific photos from iphoto library when it resides in Time Machine? The iphoto library file is much bigger than the free space available on the Mac; erasing unneeded files may not free up enough space if the library must be restored as one entire transfer. It would be easier if I could restore only pieces of it. Is there a way to do this?

    Not from Time Machine which is backing up only a file, not its individual contents. Either you restore iPhoto Library or not.
    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Get an external hard drive on which to store some of your files after which you can
          erase the data from your internal drive to free up space.
      5. Also see Freeing space on your Mac OS X startup disk.
      6. See Where did my Disk Space go?.
      7. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.

  • Can both an intel and a PPC mac use time machine on the same TC?

    I just got a TC and have successfully used time machine with a MBP. I was about to install Leopard on my PPC eMac in order to use time machine on the TC but I wondered if they could both use the TC hard drive as it is currently formatted.
    As I recall, intel macs use journaled GUID and PPC machines use another format.
    Am I deluded?

    I don't think there is a problem, and I believe others have reported in these forums that they're doing it.
    There is a lot of confusion in this area compounded by a number of people who say that some of the Apple KB articles are wrong/misleading.
    But in this case it's more a case of it doesn't matter - here is why.....
    The Time Capsule disk comes formatted, you can erase the disk via the Airport Utility. That's the closest you can come to formatting and you don't have options - so it does whatever it needs to do to get it right.
    The machines being backed up don't access the Time Capsule's disk(s) directly as they do on a locally attached disk. They do it via AFP network disk protocol and the Time Capsule disk is in effect insulated from the machine being backed up.
    (As an aside, it's because of this - the differences in what can be done over AFP - that the Time Capsule stores the backups in a different file format)
    If you add a USB attached drive to the Time Capsule you can also erase it with the Airport Utility as above. In my case, I've attached a USB drive to my Time Capsule. I never had the Time Capsule erase it, but before attaching it I attached it locally and formatted it GUID and HFSJ and it work just fine when attached to the Time Capsule. Does it have to be formatted that way - I don't know - all I know is in this one case what I did works which doesn't prove it has to be that way.
    Message was edited by: Steve Holton

  • I have three computers backing up onto the same Time Machine.  The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers.  How can I do this?

    I have three computers backing up onto the same Time Machine.  The Hard drive of one has now failed, and I'd like to restore certain items (principally photographs) to one of the other two computers.  How can I do this?

    "You can also browse the original backup disk for past backups by using "Browse other Time Machine Disks"--to see this choice, hold the Option key then click the Time Machine menu in the Finder (to see the menu, "Show Time Machine status in the menu bar" must be selected in Time Machine preferences."
    Mac 101: Time Machine

  • I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS  without formatting it so that I can use it for Time Machine and the like?

    I have a 1TB external hard drive (NTFS) that has all my files from my old PC, how do I create a partition on it for HFS  without formatting it so that I can use it for Time Machine and the like?

    There aren't any 3rd party apps or anything. I use PC's and Mac's at school and the only computer connected to a printer at my house is a PC so i need access to both

  • I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    I have just upgraded to Mavericks and have been using Time Machine on an external disk with Snow Leopard.  Can I continue to backup with Time Machine on the same external disk or do I need a new disk since the operating system has changed?

    Hi there,
    I found that Time Machine in Mavericks will sort it all out for you. You shouldn't need to buy another backup drive, unless you have insufficient space left and can't afford to delete whats on there. It should just work fine.

  • I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

    I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • Time Machine over the Network: Terribly Slow

    Hello,
    I've been using Time Machine for over 3 years now with no issues over the network; the destination being a 2TB external Seagate connected to another iMac connected through gigabit ethernet. Everything has been working flawlessly: Every hour Time Machine would MOUNT the sparseimage it created on the disk, BACKUP the data and UNMOUNT the disk image when finished.
    Until I upgraded to Lion. The above process is still working per se, however it is PAINFULLY slow! A 50MB backup can take up to AN HOUR! Searching around on the net, advised that there could be an issue with Spotlight as well, however this is not the case for me, since Spotlight finished a new index in under 30 mins. Followed every tutorial I could find on the issue, to no avail..
    I then upgraded to Mountain Lion with the hope that the issue will clear itself. Cleared my old backups, resetted Time Machine by erasing its .plist file, restarted my iMac just to make sure and connected Time Machine to the network share anew, creating a "sharing only" account on the host iMac, i.e. the one that has the external HD connected through USB. Still no luck.
    I painfully realize that I still have the same issue. While backing up, network traffic is under 100KB, and activity monitor does not show any backupd or mds or any similar processes taking anything over 3% of CPU time.
    What could be wrong?

    Hello again,
    Tries on the other iMac (also running 10.8.2) and things are exactly the same: Image creation takes almost half an hour, and copying crawls at under 1MB/min. While time machine image is mounted and Time Machine is "backing up", accessing ANY disk on the host Mac is VERY slow. Seems like something hogs up appleshare when Time Machine is in use. Mind you, there is insignificant network traffic as seen by Activity Monitor, as well as insignificant CPU usage while backing up.
    Stopping backup and using tmutil to set the Time Machine destination to the mounted image as mounted by Finder, solves the issue again, revving up Time Machine throughput to over 20MB/sec! There is also no issues acessing the other Mac as well, under this scenario.
    Up to this point, the only way I have managed to use Time Machine over a networked external HD is through the NAS server. Both configurations where I am using a Mac running 10.8.2 as a server of the external disk have failed with very low throughput while backing up. Something must be wrong in 10.8.2's afp when Time Machine is mounting the image by itself.
    I may need to remind you that I have been successfully backing up to the external HD for 4 years now; something broke a few months after the client iMac was upgraded to Lion and at the time when the host iMac was upgraded to Mountain Lion. Will try to locate a Mac running some later OS X version to do some more testing.
    Also reminding that I have used two distinctive iMacs and two external HD drives for my tests so far. The client iMac has remained the same, however 10.8.2 has been reinstalled on it a couple of times. Have also used an afp-enabled NAS server which worked fine with Time Machine.

  • HT3275 Time Machine Error: The backup disk image "Volumes/Data/My Macbook Pro.sparsebundle" is already in use. (How do I correct this issue?)

    Time Machine did not back up:
    Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
    How do I correct this issue?
    Thanks!

    You need to be careful Bob.. people might take this literally.
    Bob Timmons wrote:
    How do I correct this issue?
    Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
    https://discussions.apple.com/thread/5222487?tstart=0

  • I am using 10.9.1 on a 21.5" iMac. I am backing up using Time Machine. The hourly backups are over kill. How do get TM to backup daily?

    I am using 10.9.1 on a 21.5" iMac. I am backing up using Time Machine. The hourly backups are over kill. How do get TM to backup daily, only?

    See Pondini's TM FAQs, for details.

  • IMac 20-inch on OSX 10.7.4 running iphoto 11, my photos from my iphoto library have been deleted. I have time machine but the iphoto library file is missing when I access time machine, help please.

    I have an imac 20-inch Late 2006 model on OSX 10.7.4 running iphoto 11, somehow the application ccleaner has deleted my photos from my iphoto library. I have time machine but the iphoto library file is missing when I access time machine.
    To restore photos I have followed the steps below
    Quit iPhoto.
    Connect your Time Machine drive.
    In the Finder, open the folder containing your iPhoto Library. Unless you've moved your iPhoto Library, it can be found in Home/Pictures/iPhoto Library.
    Enter Time Machine.  (Time Machine can be found in the Dock or in the /Applications folder.)
    Choose your desired backup. The timeline on the right side of the screen displays a purple tick mark for each of the backups stored on your Time Machine drive.
    Select the iPhoto library you would like to restore, and click the Restore button.
    I dont get the option in step 6 as I dont have an iphoto library file to choose? Does anyone know why?

    Hi Barry
    Thanks but as mentioned all is intact, even at step 3 I can see the current library in Home/Pictures/iPhoto Library which has no photos, but when I access time machine any point before the NOW option the iphoto library in Home/Pictures/iPhoto Library is missing from the finder window. 
    As you can see here it is
    and now its gone. I have no explanantion.
    How do I go about moving this question as you suggested.

  • I need to configure a new hard disk as backup disk for time machine. The set up program is running and it says it will take 9 days to backup about 56 GB. Is it normal ?

    I need to configure a new hard disk as backup disk for time machine.
    The set up program is running since two hours and it says it will take 9 days to backup about 56 GB.
    Is it normal ?

    Roberto 17 wrote:
    I started this morning at 12 and after 5 hours now the backup is about 6 GB up on 56 GB.
    The new HD is a WD My Passport Edge 500 GB capacity
    5 hours to do 6 GB of transfer is NOT normal, even for USB 2.0 so there's something wrong here. I'd say cancel it, wipe the drive and then test the integrity of the drive. Do some file transfers over to and see if it's behaving normally. It could be a bad USB cable, it could be a bad drive or bad enclosure. As it's new, I suspect you haven't really put it through its paces yet and it's important to do that first before commissioning it to serve as your "reliable backup."

  • "Time machine error, The disk image cannot be mounted" What can I do??

    I ran the time machine. Then, "preparing backup" showed up for a long time. After that, a window pop out: "Time machine error, The disk image cannot be mounted" What is disk image? What can I do (I can't back up anything)
    P.S. I use time capsule for backup. there were no problem on connection

    I'm having the same issue. I do not have TC as my base station. It says right in the book that if you choose, you do not have to have it run as your router, just as a part of your existing wireless network. All software is up to date and I have already shortened the name of both my TC and TC disc to 6 characters and no spaces! I've already spoken with someone today about this. He really didn't know. Have tried backing up both wirelessly and directly connecting with an Ethernet cord. I had to finally call because when I attempted to register the product to get online support, apple.com didn't recognize the serial number!!! The gentleman on the phone got it registered for me. I bought the TC from an official apple store and for whatever reason when he put in the serial number his computer said that this TC was so "old" I guess that there was technically "no support." That basically means that even though my parents just purchased this for me a week before Christmas, that it was made a year ago and the warranty is not good?? I need to do more research on that. Right now I am very unhappy about this. I am a firm apple user and have been for years, but this is frustrating.
    I had read somewhere else (not sure I've been searching apple for what seems like forever now) to make sure that the TC was showing up in "devices" of the Finder. Mine doesn't show up there, but rather in the "Network" window. Is this an issue? If it is, can anyone tell me how to fix that. I have Time Machine backing up to my TC, so I do not see why it would be.
    UPDATE: I just opened up my TC on the "Shared" section of the Finder window and deleted the old "sparsebundle" (I had no clue that anything had backed up way back at 3:30pm on Dec 29) and now I get a slightly new message: Time Machine Error: The backup disc image could not be created." So now the word "mounted" is replaced with "created." This error showed up a lot sooner than the original one. Ok, no clue. I am going to try to Change the Disc again, and try again. I will post another update.
    Message was edited by: kryzma

Maybe you are looking for