Time Machine or Disk Utlilty to back up Mac and Boot Camp partition

Since I am experiencing slow speeds I'm planning to format my HD and restore it. I wanted to know if it would be better to restore it from a TM back up or a disk utility image of the HD?
Also, which one will work better with the XP Boot camp partition? a TM backup restore or a disk utility image and restore?
Neerav

AceNeerav wrote:
I'm performing a restore now. lets see if this fixes the issue. the method i'm using is restoring the entire HD from a time machine backup.
Please keep us informed on the outcome.
i still dont understand the difference between the three methods i learnt...
time machine restore
Full restore of your whole OSX volume (operating system; applications and user files) at the time of the last Time Machine backup (or an earlier one if you want to)
disk utility back up and restore
Prior to OSX 10.5 Leopard there was no Time Machine and that was the prefered way for a full backup
Still useful in some situations
reinstall SL and restore from TM
Clean fresh install of the operating system and restore from Time Machine backup of third-party apps and user files
Stefan
Message was edited by: Fortuny

Similar Messages

I recovered my back up via a wired connection. now Time Machine does not recognise older back ups wirelessly and wants to do a first back up

I recovered a back up from my time machine via a wired connection after getting the 'white screen of death'. Now Time Machine does not recognise any back ups on the time machine when connected wirelessly and wants to do a first back up of the whole machine. How do I get my mac to recognise these older back ups? It connects to the wifi network the time machine creates fine, with the same name and password.

I recommend the following.
1. Reset the TC to factory.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Rename the TC to SMB standard.
That means short names.. 2-20 characters but less than 10 is excellent. eg TCGenx (use number for x that is actual generation of the TC)
No spaces.
Pure alphanumeric. No apostrophe.
3. Ensure IPv6 is set to link-local..
Do the same thing for ethernet if that is used.
4. Manually mount the TC disk in Finder.
Use Go in the top menu.. connect to server.
Type in
AFP://TCname.local (where TCname is your new short name for the TC and local is default domain .. it helps using the domain I found).
You will then find the computer either can or cannot find the network resource.. if it fails something else is wrong with the actual network and you will need to fix that.
It will request the password if it is found.. password is public by default unless you changed it.. type in the password and check to keep it in your keychain.
5. Delete current TM setup and redo it with the newly named TC.
See A4 here. http://pondini.org/TM/Troubleshooting.html
If your backups cannot be found, try B6 again, now that you actually know that the disk has been properly discovered.

Why is Winclone Needed? Can't Disk Utility Restore a Boot Camp Partition?

Hi. Could we just use Disk Utility to create a backup the Boot Camp Partition running Windows 7 64-bit for example and then just use Disk Utility to restore it if you need to replace your Boot Camp partition?
Why is Winclone the tool use to create an image of Boot Camp partition as well as to restore a Boot Camp partition? Thank you in advance.
Gbu.

Thanks for the reply. How about if you opt for the non compressed image, the DVD/CD Master option (Image Format) when you do the New Image in Disk Utility? Would choosing the DVD/CD Master option be cloning it instead of archiving it? If the images created by Disk Utility are not the exact copy or clone then, it won't be bootable I believe but how come when you create an image of a DVD (to back it up for example) and burn that image, it is bootable which mean it copies it exactly (clone it in effect)?
What does WinClone do or copy exactly that Disk Utility can't?

After upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?

after upgrade to mavericks: time machine keeps asking for my back up disk and won't open unless i plug in the disk. any solutions?
before the upgrade, i could open time machine without the need for having the back up disk plugged in.

Ok. I got it to work, sort of....
As I mentioned before I tried the "disk password" and the "Time capsule Password" options to see if I can start the back up again or start a new backup. Neither worked. So I tried the firmware down grade, but like you said that did not work. I then decided to try the "Account password" option and I have never used this option before becasue it states that if there is data on the drive it would not be acessable after creating an account. Since I wiped out the disk that was nno problem. When I created the new account and choose the drive it asked for the user name and password. I entered the info for the new account I just created(FYI this has nothing to do with your login username and password), bingo! It worked!
Now I have two partitions on the TC disk. The old one and now the new account. I am guessing this is to be used if I have multiple computers, which I don't.
I any case, I am going to wipe out everything again and try again to do a backup the way I had it before.

How do I get back iphone app information from a DELETED Time Machine Backup disk

Hi People,
here is what happened:
I have been using an iPhone App (Audio Memos Free - The Voice Recorder) to record song ideas (I am a songwriter). I have been using it for years.
I backed up my iphone to itunes, and backed up my mac on Time Machine. After a month or so I did a fresh OSX install on my mac, copied all of my files back from Time Machine into my mac, and tried to set up Time Machine. I was not able to do so, so I had to format the Time Machine Backup disk and doing a "fresh" mac Time Machine Backup.
After a week or so, my iphone asks me something like "you do not possess the rights for one or more applications". do not know what i did, but after 1 minute my iPhone was wiped out of all my apps and app contents. I had also the icloud app sync, so i did not worry, recovered from icloud notes, contacts, and all other things. so i did another backup to itunes.
Now i discover icloud did not recover or save the "Audio Memos Free" app content. I know the data are hidden into the Time machine Backup HD, but i do not know where to search for the itunes backup in it.
I know it is in library, but library won't show up.
Any help would be much appreciated.
PS there is a chance that, even without a data recovery, my latest itunes backup was containing these songs, but i do not know how to fish that out of the Time machine drive.
Thank you in advance.

I would email iTunes Customer Service:
http://www.apple.com/support/itunes/store/browser/
CG

HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up. The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?

See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html

My Time Machine keeps repeating the error message "Time Machine could not complete the back- The back-up disk image "/Volumes/Data/User's iMac.sparsebundle" could not be accessed (error -1). How can I fix this?s/

My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?

Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html

Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30. I did a utility scan of the hard drive disk and it is fine.

Time Machine appears to be doing back-ups, but they do not appear on the external hard drive. The last one I can find is June 30. I did a utility scan of the hard drive disk and it is fine. What do I do?

Click the Time Machine icon in the menu bar. The time of the last backup is shown in the drop down.

HT3275 I recently bought a new Time Capsule and the following message is shown:- "Time Machine could not complete the back up. The backup disk image "/Volumes/Data-1/Brian's iMac.sparsebundle" is already in use." Can anyone help?

I recently bought a new Time Capsule and the following message has started to show:-
"Time Machine could not complete the back up. The backup disk image “/Volumes/Data-1/Brian’s iMac.sparsebundle” is already in use."
Can anyone help?

Pondini is the resident Time Machine expert on the forums, and he has all the answers.
Check is excellent Time Machine - Troubleshooting support document
http://pondini.org/TM/Troubleshooting.html
See # C17 in particular

HT201250 Time Machine cannot find my external back-up drive when I click on the "select disk" button. No drive is found. I have run a Time Machine back-up to this external drive in the past. I'm on the latest version of Snow Leopard. Thank you!

Time Machine cannot find my external back-up drive when I click on the "select disk" button. No drive is listed. I have run a Time Machine back-up to this external drive in the past. Any suggestions

Does the disk appear in Disk Utility?

HT3275 Time Machine doesn't see the back-up disk

Time Machine doesn't see the back-up disk after I've logged off and then back on, even though the disk is available to the iMac 24/7. Turning the disk off and then on in the current session works, but this seems to defeat the purpose of an unattended back-up disk. I can't find a setting that ensures the back-up disk is recognized after log-in or restart. Is there a solution?

Is this Mountain Lion??
It seems to have made some changes that make the disk drop out.. it does this even if you are continually connected to the TC and we don't have a solution yet.
For your login issue, is the TC using a disk password.. or are you setting it to default? Could you try just turning on the guest account in the TC to read and write access and see if this helps. Tell us how it goes.
There is another fix.. but it involves using disconnect all users from v5 airport utility.. Apple removed the function in v6.
If you are on Lion or Mountain Lion even you can install the v5 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

Replaced HD yesterday Was able to restore from Time Machine Now, it won't back up to Time Machine. I removed the TM and tried to add it- the error is "The disk image for "computername.sparsebundle" is in use. Try ejecting the disk image - How do I do?

Replaced HD yesterday Was able to restore from Time Machine Now, it won't back up to Time Machine. I removed the TM and tried to add it- the error is "The disk image for "computername.sparsebundle" is in use. Try ejecting the disk image - How do I do?

Hello jfilbey,
Thanks for using Apple Support Communities.
Power cycle the disk Time Machine is backing up to.
For more information on this, take a look at:
Time Machine: Troubleshooting backup issues
http://support.apple.com/kb/HT3275?viewlocale=en_US&locale=en_US
Best of luck,
Mario

Time Machine won't let me back up an external hard drive

Hello,
I am running time machine to backup onto a 500GB USB drive and keep my iTunes library on a firewire 250gb drive. When I looked in time machine options in system preferences I found that my firewire disk is already listed as 'do not back up'. I want it backed up and don't seem to be able to remove it from that list. Anyone have an ideas why?
Cheers
Steve
PS First ever post!

Are you referring to the drive used for backups, or the drive I want to back up? When I first used Time Machine, my external drive (used to house my itunes library) was on the exclude list. I easily removed it and the TM window reflected the additional contents (indicating a backup of about 75G (27 on internal drive, remainder on external). But backups are being done only on the contents of the internal drive.
I too have re-included the external drive on the exclude list, then removed it. No help. Do I have to reformat my external drive and lose all of my itunes music?
thanks

I upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

Thank you. I followed the faq#14 (using setup wizard from the osx install disk). Everything went just as planned until I woke up this morning and noticed there was no progress on the "transferring documents" meter. It stopped about 1/4 of the way. I can hear the computer working and the bar is somewhat animated like it is advancing but it's not.
Should I cancel and restart or should I wait it out? It already been about 13 hours since I started the process. Do you think it is my time machine or my iMac? Maybe the time machine file is corrupt or something.
Anyway, any help is appreciated. Thanks.

TS1963 Migrating from Time Machine onExternal Disk, Why won't Migration Assistant see my USB Connected external disk drive?

I had to format my internal disk drive on my MacBook Pro, and reload Mountain Lion 10.8.3. The startup assistant could not see my external disk drive with the Time Machine backup files. After many tries I told it to skip restoring the files and let it boot up. I was able to see my 1 TByte external drive and could see the Time Machine files using Finder.
I started the Migration Assistant and told it to migrate from Time Machine Files on an external drive. It also did not see the backup drive. The only drive icon it showed was the Macintosh HD (my internal drive).
Isn't it supposed to show you the drive you are moving the files from? I tried starting it and it looked like it was going to try to migrate the files from the internal drive (to where I don't know, back to itselfl?) Or do I just not understand. Is it seeing the external drive, without identifying it (in the Migration Asst,)?
Really looks like it is going to back up the internal HD with files that are on the internal HD and not from Time Machine.
I need to restore my files and have been told I need to do so using Migration Assistant and not Time Machine.
Help pleae and soon, need to get my taxes finished!
Thanks!

I'm surprised that no one replied to this. But I learned a few things that may be helpful to some of you with this same question.
When you restore data from an external disk drive with Time Machine files on it. As you move through the dialog (in either System Startup or in the Migration Assistant) it will ask if you want to restore from an external disk with Time Machine files. If you select this option, it will show you only one Icon. You will expect to see your external disk drive listed as the source of the restore. The icon that is shown will look like your ilnternal drive and will be labeled something like Macintosh HD. That is not your internal drive, but is your backup drive. It is labeled the same as your internal disk drive and it is telling you that you have found the backup for your internal disk drive.
Would be nice if Apple would put a note of explanation about this as part of that dialog. I wasted several hours trying to make it work Finally I took a chance and selected the drive shown and it did restore my system. I ended up with two users since I did it from Migration Assistant. Had I done it from the System Startup, there would only be the one user.

Time Machine or Disk Utlilty to back up Mac and Boot Camp partition

Similar Messages

Maybe you are looking for