Time Machine, OS X Server, and VLANs

Hi all,
I have a Time Machine share set up on my OS X server and am successfully running Time Machine backups from several Macs that are on the same VLAN as the server.
I want to be able to bring some other Macs into the fold, but they are on a different VLAN. Bonjour does not traverse routing segments, so the machines on the other VLAN do not see the server as a valid backup point.
Ideas?

In my experience Time Machine will only work on the same VLAN, unless you have IP helpers on your routers pointing to your TM server. You could always put the sharepoint as an auto mount upon login. Either force it on the local machine, or if your using Leo server with OD, just do it via group control.

Similar Messages

I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help.

Time machine on Leopard server..

I'm considering having my clients (only 10) use Time Machine to perform backups of their User directories using Leopard Server. The current configuration has them using OD Mobile Accounts with Portable Home Directories.
My question is how Time Machine would be implemented.
Would I have to revert to Local Home Directories?
I would like each user to be able to use the Time Machine space view, allowing them to view previous versions of files and/or deleted files.
Thanks!

I'd also really like to know more about Time Machine on Leopard Server. I just purchased a copy of Server and am trying to figure out a good backup system. I haven't yet installed it, but once I do I'm interested in setting things up so that users can have their home directories on the server and log in from any machine. I've never really figured out if that will require Portable Home Directories or what.
At any rate, I'm not sure if users will have to set up their machines individually to target the server as a Time Machine destination (and then I'd just exclude those home directories from the server's Time Machine setup), or if I can just set the server to run Time Machine and then the users will be able to access all of their histories.
I really hope that it's the latter, because that would make changing things like the drive configuration on the server so much easier.
Greg

I uses Time Machine to transfer files and program from old to new MacBook Pro. Aperture doesn't work. Every time I open Aperture the computer need me to key in Serial number. How do I fix it.

Hi There,
I purchased a new MacBook Pro Retina 15". Since I am using MacBook Pro and I uses Time Machine for backup files and program. Store saleman tell me I can retore my existing program and files from old MacBook Pro to new MacBook Pro computer. After files transfer it seem to be OK. But only Aperture has a problem when every time I open Aperture to edit photos, MacBook Pro ask me to key in the Aperture Serial Number that made me so inconvinent. Did any one have meet this problem and can someone teach me how to fix it, Thanks.
Nelson

Either the license files were not transferred or it has to be relicensed.
Remove and then re-install aperture. On an rMBP this should take only a couple of minutes.

I have a Seagate Freeagent 1TB external drive that ejects it's self in the middle of the time machine backup, then disappears and can't be found unless I turn it off and back on again

I have a Seagate Freeagent 1TB external drive that ejects it's self in the middle of the time machine backup, then disappears and can't be found unless I turn it off and back on again. Any ideas?

Hmmm.. sorry to jump in but...
I Wish I had seen this before I got mine.
Mine has been doing this auto eject stuff too.
I think I just plugged it in and TM let me select it but is it possible
I should have reformatted it with DU first, like with all the WD drive problems ?
Is it too late for that ?
Or just try to return it or get rid of it ?
TIA

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

I have my Time Machine on an external drive (not connected to Airport Extreme) and I have an external HD attached to airport extreme. Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme. How?

Is it possible to have Time Machine backUp computer HD AND external HD connected to Airport Extreme.
Sorry, but no.
Time Machine will backup your Mac, but not the hard drive attached to the AirPort Extreme.
Time Machine will back up a hard drive only if it is attached directly to your Mac via USB or FireWire.

Time Machine Restore Mangles Permissions and Groups

Circumstance:
My Macbook Pro running 10.5.5 gave a gray spinner after a restart last week. The restart was to clear out a couple of system processes eating up CPU when I had left it alone for a few hours.
Action:
After Disk Utility, zapping PRAM, and the probably some other standard trouble-shooting actions didn't fix the stuck start-up problem, I decided to try a full system restore from my Time Machine backups. I had previously successfully restored individual folders and files. Time Machine backs up wireless to a USB hard drive connected to my AirPort Extreme. To speed up the restore, I ran an Ethernet cable to the MBP from the Airport. The restore completed successfully. All the folders & files are correct, looks the same, etc. I restarted using the restored boot drive.
Problem:
The MBP is like a museum now--I can look but I can't touch. I first noticed something was wrong after logging in the first time because I couldn't move a file into a folder via drag-n-drop. Then Terminal went into a spinning beach ball when I opened it. Spotlight was not running. Then I noticed that my entire boot disk was read-only. I got info on the boot disk, and the Users & Groups list was strange--everyone was read-only, "wheel" had read-write and was the owner, and staff had read-write. Basically, it's like me, the Finder, an all applications have lost all their write/execute permissions on the entire drive.
*Unsuccessful Steps Taken:*
Ran Disk Utilities' Repair Permissions from Leopard dvd. Ran fsck -fy after mount / -uw from Leopard dvd Terminal and from single-user boot mode. Time Machine restore direct from TM disk via USB. Joined my user to wheel group. Changed my user password from Leopard dvd (which repairs home folder permissions). Played with chown to make all wheel-owned items staff-owned.
*Open Theories:*
Airport Time Machine restores strips ACLs and Permissions. I have to restore over wireless, not ethernet or usb. My TM backup is screwed up somehow.
Whew. This has been going on for a while, so I'm ready to give up and do an Archive & Install and begin manual migration from the backups, but my MPB is a fine-tuned machine and I hate to lose that, especially since it taunts me by being so close to normal (I can see everything! My desktop background and apps are there!).
Any help much appreciated!

The "full restore" from Time Machine is only for OSX drives.
For data-only drives, use the Time Machine browser (the "Star Wars" display). See Time Machine - Frequently Asked Question #15.
Depending on your setup, you may also want to review Transferring Home Folders not on a Startup volume.

My Time Machine keeps backing up and won't stop.

My Time Machine keeps backing up and won't stop. The problem started when it said I was out if space. It is supposed to delete the oldest backup. Now I cannot even backup at all. It just keep going and never stops, although it really does not work at all. I have used the disk utilities and iI have Zeroed out. The TC is a 1 TB and is about 13 months old. Right now it says "79.9 MB of 104.9 MB" and "backing up 961,837 items". I do not have the check mark in "Notify after old backups are deleted." It will stay stuck like this for hours and hours. The TC is plugged into a U-verse router and the 27" MAC is plugged into the TC.

So you already wiped the old backup and started again??
If that is the case it did a fresh full backup ok?
How much free space is on the TC now?
Do you happen to have multiple network links? Meaning do you have TC bridged to the U-verse router.. with both ethernet and wireless working at the same time. I discovered this one all by my loansome.. having multiple paths does not seem to worry most things on the computer.. but it totally kills TM.
I had the same sort of thing happening in testing a TC I am fixing. So I have multiple ethernet and wireless. The incremental backups became extremely slow.. by turning off wireless and one ethernet so there is only one route to the TC.. it flys again.

I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

See #C12 in Time Machine - Troubleshooting

TimeMachine not backing up, as hard drive is full. Can the time machine clear old backups and replace them with new?

Time Macine not backing up.
As the harddrive is full, Can the time machine clear old backups, and override them with new backups. For example 5 - 6 days +++ old. Backups were proformed dayly
Any help much appreciated
Many thanks,

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

My Final Cut Projects folder were missing some files, I went to my time machine backup to restore and it said I don't have permission to access the time machine folder "Final Cut Projects". Why?

Yes, I've done all "the ususal suspects.." repaired permissions, zapped pram, "reintroduced Time Machine to the backup drive by turning it off and on... etc

Can't access Time Machine backups after erase and install

Had iMac checked by Apple Authorized Service Provider after experiencing multiple problems I couldn't fix. No hardware problem. He did an erase and install of 10.5.8. The machine accesses my Time Machine backup, but in Time Machine/ iMacHome/ Sharing & Permissions says, "You can only read." If I access a folder in Home, like Desktop or Documents, it says,"You have no access." Permissions are locked and grayed out.
I spent over two hours on the phone with tech support last evening, and he finally said he'd have to turn it over to Apple engineers, which would take a few days.
Migration assistant only allows "all or nothing" migration, and I need to select just certain folders; I do not want to restore anything that might be corrupted.
Is it possible I could have an undetected hardware problem? Has anyone else done an erase and install and been able to use Time Machine backups to pick and choose what they wanted to restore?

Thank you for your reply. The apple support tech should have known this, but he didn't. However, in the course of our two hour discussion he said "Maybe it's because the computer name is different." I hadn't reached the new-set-up stage where I had changed the name of the computer from Apple's default, so I did that. My short name home folder I had already named the same as before, iMacHome.
But changing the computer name didn't help. After reading your reply, I unlocked the preferences (which were locked and grayed out in TM) to my home folder in the finder and assigned read and write to all folders within for everyone. Back in TM, preferences were no longer grayed out, but changing privileges was. I added iMacHome to the names in addition to staff read & write and everyone read and write. But ImacHome(Me) allows read only, options gray, and even though everyone is read and write, it says "You can only read" and I still cannot access Desktop, Documents, etc...
Fortunately I have a SuperDuper user file backup that I am restoring from, so all is not lost. But it seems to me TM backups should be readily available, and I want to solve this problem. I may still want to go back to a previous month to recover something. But mostly I'd just like to know that TM is a functional backup. It certainly isn't in my case right now.
Don't want to migrate the entire home folder. Too risky. Risky enough to bring over Mail and selected Application Support folders and keychains.
Thanks again. I think your answer is right on, but there must still be something else. I know I have those names correct because I see the old computer name on the sparse bundle, and the old home name in the TM backups. (Haven't read the tips yet. Will do so.)

Using Time Machine to transfer Logic and Plugins to a new Mac

Hey there folks,
I'm about to invest in a new Mac Pro to upgrade from my Imac 2010 Quad Core Intel I7. I just have a question regarding using time machine to restore my settings that were on my Imac to the Mac Pro...
I've heard that time machine backs up everything, but i've also heard that it might not back up things like all my Logic 3rd party plugins (Waves stuff for example). And i will have to enter in all the serial no's again etc...does anyone know if this is the case? Will i have to reinstall Logic 9 and all my plugins again? Or will time machine backup the Applications and plugins so i can use them straight away?
Many thanks!
Sam

Google Pondini's Setup Assistant tips, you will find migrating your settings, data and apps is extremely simple.

HT201250 Can I do a backup using Time Machine on a server, or it needs an external drive only?

Can I do a backup using Time Machine on a server, or it needs an external drive only?

Time Machine can back up to a server. The drive or partition used still needs to be formatted Mac OS Extended (Journaled).
(65169)

HT3275 Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

I thought the backup whilst asleep was only used on Mountain Lion.. but perhaps it was also introduced with Lion.. anyway it is only enabled on later firmware.. in latest laptops.
http://reviews.cnet.com/8301-13727_7-57480490-263/mountain-lions-powernap-featur e-requires-firmware-update/
A quick google finds all sorts of info.. remember google is your friend.

Time Machine, OS X Server, and VLANs

Similar Messages

Maybe you are looking for