Time Machine Out of Space After Updating To iLife 09

I finally updated to iLife 09 yesterday and as soon as I did Time Machine was unable to do any more backups... It says that it needs 90+ GB of Space and only 60+ are available. Any thoughts? My Mac has 193GB and my Time Machine Disc is 250GB. I understand that it needs room to work as well but obviously something changed after I installed iLife. I'm guessing something with iPhoto? I also noticed that my actual iPhoto's take up 60GB but the iPhoto App is a bit over 100GB. I hate to have to step up and buy a bigger drive as this one is really big enough for what I'm doing...

Animal_Muppet wrote:
I finally updated to iLife 09 yesterday and as soon as I did Time Machine was unable to do any more backups... It says that it needs 90+ GB of Space and only 60+ are available. Any thoughts? My Mac has 193GB and my Time Machine Disc is 250GB. I understand that it needs room to work as well but obviously something changed after I installed iLife. I'm guessing something with iPhoto? I also noticed that my actual iPhoto's take up 60GB
The upgrade changed most of the files, I think for the "facial recognition" feature, so they all have to be backed-up again. Time Machine adds 20% to the expected size of the backup for workspace, so there must have been about another 15 GB of changes (60 + 15 = 75 + 20% = 90).
but the iPhoto App is a bit over 100GB.
The iPhoto app in your Applications folder is 100 GB? The app does not contain data. Mine is 430 MB.
And yes, your TM disk is too small. It varies greatly depending on how you use your Mac, and how long you want backups to be kept, but the rule of thumb is TM needs 2-3 times the space of the data it's backing-up. See #1 in the Frequently Asked Questions *User Tip,* also at the top of this forum.
What's most likely happened here is, Time Machine, needing to back up about 75 GB (and needing that extra 20% for 90 GB), has deleted all your old backups except the last remaining one (which it will never delete). Assuming that takes 190 GB, that leaves only 60 GB available, so there's not enough room.
Short term, your only real options are to delete the previous backups of your iPhoto library (see #12 in the FAQ Tip), or erase the TM drive and let it start fresh.
Longer term, you need a larger drive. They've gotten much less expensive in the last couple of years. Then use the old one for a "bootable clone" via CarbonCopyCloner or SuperDuper, as a secondary backup. That way, you're protected against a failure of either app or hard drive.

Similar Messages

Time Machine out of space after 10.10.3 upgrade

After upgrading from 10.10.2 to 10.10.3, Time Machine says I am out of space on my 1 TB Time Capsule. I have 122 GB of space available, but it's saying I need 423 GB to perform a backup. I suspect this is because iPhoto change to Photo and my Time Capsule is now hosting two copies of my photo library: the older one from iPhoto and the newer one from Photo.
Other than wiping out my Time Capsule and backing up from scratch, any ideas how I can get Time Machine the space it needs? Thanks!

You will have to erase the Time Capsule drive and re-backup from scratch.

Time Machine needs "work space" after reinstall of Snow Leopard

Hey all,
I had to completely nuke my hard drive and reinstall Snow Leopard after my hard drive got corrupted and my MacBook wouldn't boot up. I restored my system from my Time Machine backup, and after installing all updates, everything on the system seems all hunkey-dorey.
Except for Time Machine. Whenever TM tries to do a backup, it tells me that it needs 250GB of storage for a backup - as if it's completely ignoring all my old backups. I'd prefer not to wipe my external drive, so if there's a way to get TM to work again without a wipe, I'd love to hear it, but I suppose if I have to, I have to.
One more thing, according to the Time Machine Buddy widget, TM detects that it has a migration, but the UUID doesn't match. Here's the full log.
Starting standard backup
Backing up to: /Volumes/My Passport/Backups.backupdb
Detected system migration from: /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-08-30-220159/Macintosh HD
Event store UUIDs don't match for volume: Macintosh HD
Node requires deep traversal:/ reason:must scan subdirs|new event db|
Starting pre-backup thinning: 253.69 GB requested (including padding), 64.14 GB available
Found partially deleted backup - trying again to delete: 2010-04-20-180830
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-04-20-180830: 64.87 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-08-30-181632: 64.88 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-08-30-171626: 65.03 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-08-30-170427: 65.04 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-08-30-160235: 65.19 GB now available
Removed all 5 expired backups, more space is needed - deleting oldest backups to make room
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-04-27-174822: 71.78 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-05-04-171714: 75.79 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-05-11-094053: 77.26 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-05-18-165214: 81.98 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-05-26-173141: 82.82 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-06-02-214217: 106.60 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-06-09-100848: 114.84 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-06-16-115343: 120.15 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-07-29-112106: 123.57 GB now available
Deleted backup /Volumes/My Passport/Backups.backupdb/Brian Charous's MacBook Pro/2010-08-02-104709: 123.71 GB now available
Deleted backup /Volumes/My Passport/Backups.backup

You reinstalled OS X which causes TM to backup the drive from scratch. This is normal.
See User Tips for Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.

Time machine out of space on ext hardrive

I have been using a 1TB ext harddrive and my friend partitioned at 500g for Time Machine and 500g for storage. It is now full and Time Machine can not back up any longer.
I get the message that I have 5g of backup needed and only 1gig of space...
So I have purchased a new ext hardrive with 2TB and a firewire 800 connection and I am wondering what is the best way to use the two drives? Do I move 500g of files off of the old drive to the new one and make the old one my Time machine drive? Or do I somehow set the new drive up to become a partitioned drive with 1tb for storage and 1tb for Time Machine?

That's almost but not completely correct:
About TM "Backup Drive is Full"
Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.

Time Machine out of space

I don't want to delete files. I am willing to give up my current history of backups. I just want to start from scratch. I have run into this before and TM will backup my data, if it doesn't have to worry about the existing backup, I just can't remember how to do it. Anyone out there with this situation and the solution?

Giving up your current history of backups will delete files. If this is what you want to do then open Disk Utility, slect your Time Machine disk, and then use the Erase tab to format the drive. This will clear out the backups, and allow you to re-select the drive in the Time Machine preferences to establish your backups again.

Time Machine backups only work after restart

Hi
Getting frustrated as Time Machine backups only work after a restart. Work for a few hours and then get stuck with Backing up: XXMB of XXGB. I have left it on this for many hours ie overnight without completion
I have a Mid 2014 MBP 13 in running 10.10.2
I backup onto an external USB via a hub.
Things I have tried with review of Pondini great site which has helped with different TM backup problems.
Disk permissions and repair of SSD on MBP (were errors but did not solve issue)
Direct USB connection
Backup via Airport Extreme
Re-index spotlight
Reformat USB disk
New USB disk!
Below is log (backupd filtered) of latest backup attempts including final completed occuring after restart.
Any help gratefully received
19/03/2015 12:59:07.730 pm
com.apple.prefs.backup.remoteservice[2916]
Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.backupd.status.xpc
19/03/2015 12:59:10.238 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) Unknown key for Boolean: ForceEnableHack
19/03/2015 12:59:10.240 pm
UserEventAgent[16]
com.apple.backupd-auto launchd job enabled
19/03/2015 12:59:10.238 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 12:59:10.239 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
19/03/2015 12:59:23.162 pm
com.apple.backupd[2929]
Starting manual backup
19/03/2015 12:59:23.358 pm
com.apple.backupd[2929]
Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
19/03/2015 1:01:55.000 pm
kernel[0]
process backupd[2929] thread 893245 caught burning CPU!; EXC_RESOURCE supressed due to audio playback
19/03/2015 1:12:00.297 pm
com.apple.backupd[2929]
Will copy (Zero KB) from Macintosh HD
19/03/2015 1:12:00.350 pm
com.apple.backupd[2929]
Found 221479 files (439.9 MB) needing backup
19/03/2015 1:12:01.050 pm
com.apple.backupd[2929]
2.33 GB required (including padding), 554.92 GB available
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-helper.status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
19/03/2015 1:21:04.659 pm
com.apple.xpc.launchd[1]
(com.apple.backupd-auto) This service is defined to be constantly running and is inherently inefficient.
19/03/2015 1:21:51.062 pm
com.apple.backupd[167]
Starting manual backup
19/03/2015 1:21:51.380 pm
com.apple.backupd[167]
Backing up to /dev/disk2s1: /Volumes/TIMEMACH/Backups.backupdb
19/03/2015 1:24:40.000 pm
kernel[0]
process backupd[167] thread 7580 caught burning CPU! It used more than 50% CPU (Actual recent usage: 53%) over 180 seconds. thread lifetime cpu usage 90.616005 seconds, (29.940993 user, 60.675012 system) ledger info: balance: 90000913400 credit: 90000913400 debit: 0 limit: 90000000000 (50%) period: 180000000000 time since last refill (ns): 169146762635
19/03/2015 1:24:40.821 pm
spindump[507]
Saved cpu_resource.diag report for backupd version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2015-03-19-132440_David-Henshaw-Work-Ma cbook.cpu_resource.diag
19/03/2015 1:34:29.100 pm
com.apple.backupd[167]
Will copy (Zero KB) from Macintosh HD
19/03/2015 1:34:29.155 pm
com.apple.backupd[167]
Found 221268 files (493.5 MB) needing backup
19/03/2015 1:34:29.235 pm
com.apple.backupd[167]
2.39 GB required (including padding), 554.92 GB available
19/03/2015 1:35:57.393 pm
com.apple.backupd[167]
Copied 5145 items (486.8 MB) from volume Macintosh HD. Linked 21319.
19/03/2015 1:36:33.451 pm
com.apple.backupd[167]
Created new backup: 2015-03-19-133632
19/03/2015 1:36:39.933 pm
com.apple.backupd[167]
Starting post-backup thinning
19/03/2015 1:36:39.943 pm
com.apple.backupd[167]
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/2AC908D9-122D-4267-9652-74A9DC6C8795
19/03/2015 1:36:39.944 pm
com.apple.backupd[167]
Error: Error Domain=NSOSStatusErrorDomain Code=-50 "The operation couldn’t be completed. (OSStatus error -50.)" (paramErr: error in user parameter list) deleting backup: /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-19-132152.inProgress/A01A1A4C-F424-4F99-9466-6A5F571CE4F5
19/03/2015 1:36:53.268 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-125436 (10.4 MB)
19/03/2015 1:37:05.844 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-115428 (20.6 MB)
19/03/2015 1:37:12.476 pm
com.apple.backupd[167]
Deleted /Volumes/TIMEMACH/Backups.backupdb/David Henshaw Work Macbook/2015-03-18-102131 (1.5 MB)
19/03/2015 1:37:12.476 pm
com.apple.backupd[167]
Post-backup thinning complete: 3 expired backups removed
19/03/2015 1:37:12.495 pm
com.apple.backupd[167]
Backup completed successfully.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.7 ("Lion") and later. I don't recommend running it on older versions of OS X. It will do no harm, but it won't do much good either.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. Try to test under conditions that reproduce the problem, as far as possible. For example, if the computer is sometimes, but not always, slow, run the test during a slowdown.
You may have started up in "safe" mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(1295 ' 0.5 0.25 50 1000 15 5120 1000 25000 6 6 5 1 0 100 ' 51 25600 4 10 25 5120 102400 1000 25 1536 450 40 500 300 85 25 20480 262144 20 2000 524288 604800 5 1024 25 );k=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts Displays PCI UniversalAccess InstallHistory ConfigurationProfile AirPort 'com\.apple\.' -\\t N\\/A 'AES|atr|udit|msa|dnse|ax|ensh|fami|FileS|fing|ft[pw]|gedC|kdu|etS|is\.|alk|ODSA|otp|htt|pace|pcas|ps-lp|rexe|rlo|rsh|smb|snm|teln|upd-[aw]|uuc|vix|webf' OSBundle{Require,AllowUserLoa}d 'Mb/s:Mb/s:ms/s:KiB/s:%:total:MB:total:lifetime:sampled:per sec' 'Net in:Net out:I/O wait time:I/O requests:CPU usage:Open files:Memory:Mach ports:Energy:Energy:File opens:Forks:Failed forks:System errors' 'tsA|[ST]M[HL]' PlistBuddy{,' 2>&1'}' -c Print' 'Info\.plist' CFBundleIdentifier );f=('\n%s'{': ','\n\n'}'%s\n' '\nRAM details\n%s\n' %s{' ','\n'{"${k[22]}",}}'%s\n' '%.1f GiB: %s\n' '\n    ...and %s more line(s)\n' '\nContents of %s\n    '"${k[22]}"'mod date: %s\n    '"${k[22]}"'checksum: %s\n%s\n' );c=(879294308 4071182229 461455494 216630318 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 2636415542 3694147963 1233118628 2456546649 2806998573 2778718105 842973933 1383871077 1591517921 676087606 1445213025 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 3374894509 1051159591 892310726 1707497389 523110921 2883943871 3873345487 );s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[4]} ' s/:$//;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[9]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of|yc/!{ s/^.+is |\.//g;p;q;} ' ' BEGIN { FS="\f";if(system("A1 42 83 114")) d="^'"${k[21]}"'launch(d\.peruser\.[0-9]+|ctl\.(Aqua|Background|System))$";} { if($2~/[1-9]/) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else if(!d||$1!~d) print $1;} ' ' $1>1{$NF=$NF" x"$1} /\*/{if(!f)f="\n\t* Code injection"} {$1=""} 1;END{print f} ' ' NR==2&&$4<='${p[7]}'{print $4} ' ' BEGIN{FS=":"} ($1~"wir"&&$2>'${p[22]}') {printf("wired %.1f\n",$2/2^18)} ($1~/P.+ts/&&$2>'${p[19]}') {printf("paged %.1f\n",$2/2^18)} ' '/YLD/s/=/ /p' ' { q=$1;$1="";u=$NF;$NF="";gsub(/ +$/,"");print q"\f"$0"\f"u;} ' ' /^ {6}[^ ]/d;s/:$//;/([^ey]|[^n]e):/d;/e: Y/d;s/: Y.+//g;H;${ g;s/ \n (\n)/\1/g;s/\n +(M[^ ]+)[ -~]+/ (\1)/;s/\n$//;/( {8}[^ ].*){2,}/p;} ' 's:^:/:p;' ' !/, .+:/ { print;n++;} END{if(n<'{${p[12]},${p[13]}}')printf("^'"${k[21]}"'.+")} ' '|uniq' ' 1;END { print "/L.+/Scr.+/Templ.+\.app$";print "/L.+/Pri.+\.plugin$";if(NR<'{${p[14]},${p[21]}}') print "^/[Sp].+|'${k[21]}'";} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p;' '&&echo On' '/\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/p' '/\.dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".","");print $0"$";} END { split("'"${c[*]}"'",c);for(i in c) print "\t"c[i]"$";} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/((iTu|ok).+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' ' BEGIN{ FS="= "} $2 { gsub(/[()"]/,"",$2);print $2;} !/:/&&!$2{print "'${k[23]}'"} ' ' /^\//!d;s/^.{5}//;s/ [^/]+\//: \//p;' '>&-||echo No' '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[2]}'{$2=$2-1;print}' ' BEGIN { M1='${p[16]}';M2='${p[18]}';M3='${p[8]}';M4='${p[3]}';} !/^A/{next};/%/ { getline;if($5<M1) o["CPU"]="CPU: user "$2"%, system "$4"%";next;} $2~/^disk/&&$4>M2 { o[$2]=$2": "$3" ops/s, "$4" blocks/s";next;} $2~/^(en[0-9]|bridg)/ { if(o[$2]) { e=$3+$4+$5+$6;if(e) o[$2]=o[$2]"; errors "e"/s";next;};if($4>M3||$6>M4) o[$2]=$2": in "int($4/1024)", out "int($6/1024)" (KiB/s)";} END { for(i in o) print o[i];} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' BEGIN{FS=": "} /^ {10}O/ {exit} /^ {0,12}[^ ]/ {next} $1~"Ne"&&$2!~/^In/{print} $1~"Si" { split($2,a," ");if(a[1]-a[4]<'${p[5]}') print;};$1~"T"&&$2<'${p[20]}'{print};$1~"Se"&&$2!~"2"{print};' ' BEGIN { FS="\f";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1;} ' ' BEGIN { split("'"${p[1]}"'",m);FS="\f";} $2<=m[$1]{next} $1==9||$1==10 { "ps -c -ouid -p"$4"|sed 1d"|getline $4;} $1<11 { o[$1]=o[$1]"\n    "$3" (UID "int($4)"): "$2;} $1==11&&$5!~"^/dev" { o[$1]=o[$1]"\n    "$3" (UID "$4") => "$5" (status "$6"): "$2;} $1==12&&$5 { "ps -c -ocomm -p"$5"|sed 1d"|getline n;if(n) $5=n;o[$1]=o[$1]"\n    "$5" => "$3" (UID "$4"): "$2;} $1~/1[34]/ { o[$1]=o[$1]"\n    "$3" (UID "$4", error "$5"): "$2;} END { n=split("'"${k[27]}"'",u,":");for(i=n+1;i<n+4;i++)u[i]=u[n];split("'"${k[28]}"'",l,":");for(i=1;i<15;i++) if(o[i])print "\n"l[i]" ("u[i]")\n"o[i];} ' ' /^ {8}[^ ]/{print} ' ' BEGIN { L='${p[17]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n    "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n    [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${k[30]}"' "F|getline g) { l++;if(l<=L) f=f"\n    "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n    '"${k[22]}"'"T;printf("'"${f[8]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' 's/^.{52}(.+) <.+/\1/p' ' /id: N|te: Y/{i++} END{print i} ' ' /kext:/ { split($0,a,":");p=a[1];k[S]='${k[25]}';k[U]='${k[26]}';v[S]="Safe";v[U]="true";for(i in k) { s=system("'"${k[30]}"'\\ :"k[i]" \""p"\"/*/I*|grep -qw "v[i]);if(!s) a[1]=a[1]" "i;};if(!a[2]) a[2]="'"${k[23]}"'";printf("'"${f[4]}"'",a[1],a[2]);next;} !/^ *$/ { p="'"${k[31]}"'\\ :'"${k[33]}"' \""$0"\"/*/'${k[32]}'";p|getline b;close(p);if(b~/, .+:/||b=="") b="'"${k[23]}"'";printf("'"${f[4]}"'",$0,b);} ' '/ en/!s/\.//p' ' NR>=13 { gsub(/[^0-9]/,"",$1);print;} ' ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?'${k[32]}'$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ / [VY]/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' '/^find: /!p;' ' /^p/{ s/.//g;x;s/\nu/'$'\f''/;s/(\n)c/\1'$'\f''/;s/\n\n//;p;};H;' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */    /;p;' ' s/^.+ |\(.+$$//g;p;' '1;END{if(NR<'${p[15]}')printf("^/(S|usr/(X|li))")}' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END{ if(i>1)print n} ' s/{'\.|jnl: ','P.+:'}'//;s/ +([0-9]+)(.+)/\2'$'\t\t''\1/p' ' /^ +iP.+:$/{ s/://;b0'$'\n'' };/es: ./{ /iOS/d;s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(B2|[my]): /H;d;:0'$'\n'' x;/[my]: [AM]|m: I.+p$|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/'$'\f''(0|-(4[34])?)$/p' '|sort'{'|uniq'{,\ -c},\ -nr} ' s/^/'{5,6,7,8,9,10}$'\f''/;s/ *'$'\f'' */'$'\f''/g;p;' 's/:.+$//p' '|wc -l' /{\\.{kext,xpc,'(appex|pluginkit)'}'\/(Contents\/)?'Info,'Launch[AD].+'}'\.plist$/p' 's/([-+.?])/\\\1/g;p' 's/, /\'$'\n/g;p' ' BEGIN{FS="\f"} { printf("'"${f[6]}"'",$1/2^30,$2);} ' ' /= D/&&$1!~/'{${k[24]},${k[29]}}'/ { getline d;if(d~"t") print $1;} ' ' BEGIN{FS="\t"} NR>1&&$NF!~/0x|\.([0-9]{3,}|[-0-9A-F]{36})$/ { print $NF"\f"a[split($(NF-1),a," ")];} ' '|tail -n'{${p[6]},${p[10]}} ' s/.+bus /Bus: /;s/,.+[(]/ /;s/,.+//p;' ' { $NF=$NF" Errors: "$1;$1="";} 1 ' ' 1s/^/\'$'\n''/;/^ +(([MNPRSV]|De|Li|Tu).+|Bus): .|d: Y/d;s/:$//;$d;p;' ' BEGIN { RS=",";FS=":";} $1~"name" { gsub("\"","",$2);print $2;} ' '|grep -q e:/' '/[^ .]/p' '{ print $1}' ' /^ +N.+: [1-9]/ { i++;} END { if(i) print "system: "i;} ' ' NF { print "'{admin,user}' "$NF;exit;} ' ' /se.+ =/,/[\}]/!d;/[=\}]/!p ' ' 3,4d;/^ +D|Of|Fu| [0B]/d;s/^ |:$//g;$!H;${ x;/:/p;} ' ' BEGIN { FS=": ";} NR==1 { sub(":","");h="\n"$1"\n";} /:$/ { l=$1;next;} $1~"S"&&$2!~3 { getline;next;} /^ {6}I/ { i++;L[i]=l" "$2;if(i=='${p[24]}') exit;} END { if(i) print h;for(j=0;j<i;j++) print L[i-j];} ' ' /./H;${ x;s/\n//;s/\n/, /g;/,/p;} ' ' {if(int($6)>'${p[25]}')printf("swap used %.1f\n",$6/1024)} ' ' BEGIN{FS="\""} $3~/ t/&&$2!~/'{${k[24]},${k[29]}}'/{print $2} ' ' int($1)>13 ' p ' BEGIN{FS="DB="} { sub(/\.db.*/,".db",$2);print $2;} ' {,1d\;}'/r%/,/^$/p' ' NR==1{next} NR>11||!$0{exit} {print $NF"\f"substr($0,1,32)"\f"$(NF-7)} ' '/e:/{print $2}' ' /^[(]/{ s/....//;s/$/:/;N;/: [)]$/d;s/\n.+ ([^ ]+).$/\1/;H;};${ g;p;} ' '1;END { exit "find /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom -mtime -'${p[23]}'s"|getline;} ' ' NR<='${p[26]}' { o=o"\n"$0;next;} { o="";exit;} END{print o|"sed 1d"} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab kextfind top pkgutil "${k[30]}\\" echo cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin' env pluginkit scutil 'dtrace -q -x aggsortrev -n' security sed\ -En awk 'dscl . -read' networksetup mdutil lsof test osascript\ -e netstat mdls route cat uname powermetrics );c2=(${k[21]}loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'" 'L*/Ca*/'${k[21]}'Saf*/E* -d 2 -name '${k[32]} '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' -i '-nl -print' '-F \$Sender -k Level Nle 3 -k Facility Req "'${k[21]}'('{'bird|.*i?clou','lsu|sha'}')"' "-f'%N: %l' Desktop {/,}L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message CRne '0xdc008012|(allow|call)ing|Goog|(mplet|nabl)ed|ry HD|safe b|xpm' -k Message CReq 'bad |Can.t l|corru|dead|fail|GPU |hfs: Ru|inval|Limiti|v_c|NVDA[(]|pagin|Purg(ed|in)|error|Refus|TCON|tim(ed? ?|ing )o|trig|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o%cpu,comm,ruid' "' syscall::recvfrom:return {@a[execname,uid]=sum(arg0)} syscall::sendto:return {@b[execname,uid]=sum(arg0)} syscall::open*:entry {@c[execname,uid,copyinstr(arg0),errno]=count()} syscall::execve:return, syscall::posix_spawn:return {@d[execname,uid,ppid]=count()} syscall::fork:return, syscall::vfork:return, syscall::posix_spawn:return /arg0<0/ {@e[execname,uid,arg0]=count()} syscall:::return /errno!=0/ {@f[execname,uid,errno]=count()} io:::wait-start {self->t=timestamp} io:::wait-done /self->t/ { this->T=timestamp - self->t;@g[execname,uid]=sum(this->T);self->t=0;} io:::start {@h[execname,uid]=sum(args[0]->b_bcount)} tick-10sec { normalize(@a,2560000);normalize(@b,2560000);normalize(@c,10);normalize(@d,10);normalize(@e,10);normalize(@f,10);normalize(@g,10000000);normalize(@h,10240);printa(\"1\f%@d\f%s\f%d\n\",@a);printa(\"2\f%@d\f%s\f%d\n\",@b);printa(\"11\f%@d\f%s\f%d\f%s\f%d\n\",@c);printa(\"12\f%@d\f%s\f%d\f%d\n\",@d);printa(\"13\f%@d\f%s\f%d\f%d\n\",@e);printa(\"14\f%@d\f%s\f%d\f%d\n\",@f);printa(\"3\f%@d\f%s\f%d\n\",@g);printa(\"4\f%@d\f%s\f%d\n\",@h);exit(0);} '" '-f -pfc /var/db/r*/'${k[21]}'*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag $ -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f'$'\f''%Sc'$'\f''%N -t%F {} \;' '/S*/*/Ca*/*xpc*' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' /\ kMDItemContentTypeTree=${k[21]}{bundle,mach-o-dylib} :Label "/p*/e*/{auto*,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {/p*,/usr/local}/e*/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list '-F "" -k Sender hidd -k Level Nle 3' /Library/Preferences/${k[21]}alf\ globalstate --proxy '-n get default' vm.swapusage --dns -get{dnsservers,info} dump-trust-settings\ {-s,-d,} -n1 '-R -ce -l1 -n5 -o'{'prt -stats prt','mem -stats mem'}',command,uid' -kl -l -s\ / '--regexp --files '${k[21]}'pkg.*' '+c0 -i4TCP:0-1023' ${k[21]}dashboard\ layer-gadgets '-d /L*/Mana*/$USER' '-app Safari WebKitDNSPrefetchingEnabled' '-Fcu +c0 -l' -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' '-F \$Message -k Sender kernel -k Message CReq "'{'n Cause: -','(a und|I/O |jnl_io.+)err|disk.+abo','USBF:.+bus'}'"' -name\ kMDItem${k[33]} -T\ hfs '-n get default' -listnetworkserviceorder :${k[33]} :CFBundleDisplayName $EUID {'$TMPDIR../C ','/{S*/,}'}'L*/{,Co*/*/*/L*/}{Cache,Log}s -type f -size +'${p[11]}'M -exec stat -f%z'$'\f''%N {} \;' \ /v*/d*/*/*l*d{,.*.$UID}/* '-app Safari UserStyleSheetEnabled' 'L*/A*/Fi*/P*/*/a*.json' users/$USER\ HomeDirectory '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' ' -F "\$Time \$(Sender): \$Message" -k Sender Rne "launchd|nsurls" -k Level Nle 3 -k Facility R'{'ne "user|','eq "'}'console" -k Message CRne "[{}<>]|asser|commit - no t|deprec|done |ect pas|fmfd|Goog|ksho|ndum|obso|realp|rned f|/root|sandbox ex" ' getenv '/ "kMDItemDateAdded>=\$time.now(-'${p[23]}')&&kMDItem'${k[33]}'=*"' -m\ / '' ' -F "\$Time \$(RefProc): \$Message" -k Sender Req launchd -k Level Nle 3 -k Message Rne "asse|bug|File ex|hij|Ig|Jet|key is|lid t|Plea|ship" ' print{,-disabled}\ {system,{gui,user}/$UID} '-n1 --show-initial-usage --show-process-energy' -r ' -F "\$Message" -k Sender nsurlstoraged -k Time ge -1h -k Level Nle 4 -k Message Req "^(ER|IN)" ' '~ "kMDItemKind=Package"' );N1=${#c2[@]};for j in {0..20};do c2[N1+j]=SP${k[j]}DataType;done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel,Firefox}\ extensions System\ load boot\ args FileVault\ {2,1} {Kernel,System,Console,launchd}\ log SMC Login\ hook 'I/O per process' 'High file counts' UID {System,Login,Agent,User}' services '{load,disabl}ed {Admin,Root}\ access Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory\ pressure Listeners Widgets Parental\ Controls Prefetching Nets Volumes {Continuity,I/O,iCloud,HID,HCI}\ errors {User,System}\ caches/logs XPC\ cache Startup\ items Shutdown\ codes Heat Diagnostic\ reports Bad\ {plist,cache}s 'VM (GiB)' Bundles{,' (new)'} Trust\ settings Activity Free\ space Stylesheet Library\ paths{,' ('{shell,launchd}\)} Data\ packages );N3=${#l[@]};for i in {0..8};do l[N3+i]=${k[5+i]};done;F() { local x="${s[$1]}";[[ "$x" =~ ^([\&\|\<\>]|$) ]]&&{ printf "$x";return;};:|${c1[30]} "$x" 2>&-;printf "%s \'%s\'" "|${c1[30+$?]}" "$x";};A0() { Q=6;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo -v;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;date '+Start time: %T %D%n';printf '\n[Process started]\n\n'>&4;printf 'Revision: %s\n\n' ${p[0]};};A1() { local c="${c1[$1]} ${c2[$2]}";shift 2;c="$c ` while [[ "$1" ]];do F $1;shift;done`";((P2))&&{ c="sudo $c";P2=;};v=`eval "$c"`;[[ "$v" ]];};A2() { local c="${c1[$1]}";[[ "$c" =~ ^(awk|sed ) ]]&&c="$c '${s[$2]}'"||c="$c ${c2[$2]}";shift 2;local d=` while [[ "$1" ]];do F $1;shift;done`;((P2))&&{ c="sudo $c";P2=;};local a;v=` while read a;do eval "$c '$a' $d";done<<<"$v";`;[[ "$v" ]];};A3(){ v=$((`date +%s`-v[3]));};export -f A1 A2 F;B1() { v=No;! ((v[1]))&&{ v=;P1=1;};};eval "`type -a B1|sed '1d;s/1/2/'`";B3(){ v[$1]="$v";};B4() { local i=$1;local j=$2;shift 2;local c="cat` while [[ "$1" ]];do F $1;shift;done`";v[j]=`eval "{ $c;}"<<<"${v[i]}"`;};B5(){ v="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d$'\e' <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F$'\e' ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`egrep -v "${v[$1]}"<<<"$v"|sort`;};eval "`type -a B7|sed '1d;s/7/8/;s/-v //'`";C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { B4 0 0 63&&C1 1 $1;};C4() { echo $'\t'"Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};C5() { sudo -k;pbcopy<<<"$o";printf '\n\tThe test results are on the Clipboard.\n\n\tPlease close this window.\n';exit 2>&-;};for i in 1 2;do eval D$((i-1))'() { A'$i' $@;C0;};';for j in 2 3;do eval D$((i+2*j-3))'() { local x=$1;shift;A'$i' $@;C'$j' $x;};';done;done;trap C5 2;o=$({ A0;D0 0 N1+1 2;D0 0 $N1 1;B1;C2 31;B1&&! B2&&C2 32;D2 22 15 63;D0 0 N1+2 3;D0 0 N1+15 17;D4 3 0 N1+3 4;D4 4 0 N1+4 5;D4 N3+4 0 N1+9 59;D0 0 N1+16 99;for i in 0 1 2;do D4 N3+i 0 N1+5+i 6;done;D4 N3+3 0 N1+8 71;D4 62 1 10 7;D4 10 1 11 8;B2&&D4 18 19 53 67;D2 11 2 12 9;D2 12 3 13 10;D2 13 32 70 101 25;D2 71 6 76 13;D2 45 20 52 66;A1 7 77 14;B3 28;A1 20 31 111;B6 0 28 5;B4 0 0 110;C2 66;D4 70 8 15 38;D0 9 16 16 77 45;C4;B2&&D0 35 49 61 75 76 78 45;B2&&{ D0 28 17 45;C4;};B2&&{ A1 43 85 117;B3 29;B4 0 0 119 76 81 45;C0;B4 29 0 118 119 76 82 45;C0;    };D0 12 40 54 16 79 45;D0 12 39 54 16 80 45;D4 74 25 77 15&&{ B4 0 8 103;B4 8 0;A2 18 74;B6 8 0 3;C3 75;};B2&&D4 19 21 0;B2&&D4 40 10 42;D2 2 0 N1+19 46 84;D2 44 34 43 53;D2 59 22 20 32;D2 33 0 N1+14 51;for i in {0..2};do A1 29 35+i 104+i;B3 25+i;done;B6 25 27 5;B6 0 26 5;B4 0 0 110;C2 69;D2 34 21 28 35;D4 35 27 29 36;A1 40 59 120;B3 18;A1 33 60 121;B8 18;B4 0 19 83;A1 27 32 39&&{ B3 20;B4 19 0;A2 33 33 40;B3 21;B6 20 21 3;};C2 36;D4 50 38 5 68;B4 19 0;D5 37 33 34 42;B2&&D4 46 35 45 55;D4 38 0 N1+20 43;B2&&D4 58 4 65 76 91;D4 63 4 19 44 75 95 12;B1&&{ D4 53 5 55 75 69&&D4 51 6 58 31;D4 56 5 56 97 75 98&&D0 0 N1+7 99;D2 55 5 27 84;D4 61 5 54 75 70;D4 14 5 14 96;D4 15 5 72 96;D4 17 5 78 96;C4;};D4 16 5 73 96;A1 13 44 74 18;C4;B3 4;B4 4 0 85;A2 14 61 89;B4 0 5 19 102;A1 17 41 50;B7 5;C3 8;B4 4 0 88;A2 14 24 89;C4;B4 0 6 19 102;B4 4 0 86;A2 14 61 89;B4 0 7 19 102;B5 6 7;B4 0 11 73 102;A1 42 86 114;j=$?;for i in 0 1 2;do ((i==2&&j==1))&&break;((! j))||((i))||B2&&A1 18 $((79+i-(i+53)*j)) 107+8*j 94 74||continue;B7 11;B4 0 0 11;C3 $((23+i*(1+i+2*j)));D4 $((24+i*(1+i+2*j))) 18-4*j 82+i-16*j $((112+((3-i)*i-40*j)/2));done;D4 60 4 21 24;D4 42 14 1 62;D4 43 37 2 90 48;D4 41 10 42;D2 48 36 47 25;A1 4 3 60&&{ B3 9;A2 14 61;B4 0 10 21;B4 9 0;A2 14 62;B4 0 0 21;B6 0 10 4;C3 5;};D4 9 41 69 100;D2 72 21 68 35;D2 49 21 48 49;B4 4 22 57 102;A1 21 46 56 74;B7 22;B4 0 0 58;C3 47;D4 54 5 7 75 76 69;D4 52 5 8 75 76 69;D4 57 4 64 76 91;D2 0 4 4 84;D2 1 4 51 84;D4 21 22 9 37;D0 0 N1+17 108;D4 76 24 88;A1 23 18 28 89;B4 0 16 22 102;A1 16 25 33;B7 16;B4 0 0 34;D1 31 47;D4 64 4 71 41;D4 65 5 87 116 74;C4;B4 4 12 26 89 23 102;for i in {0..3};do A1 0 N1+10+i 72 74;B7 12;B4 0 0 52;C3 N3+5+i;((i))||C4;done;A1 24 22 29;B7 12;B3 14;A2 39 57 30;B6 14 0 4;C3 67;A1 24 75 74;B4 1 1 122||B7 12;B4 0 0 123;B3 23;A2 39 57 30;B6 23 0 4;C3 68;B4 4 13 27 89 65;A1 24 23;B7 13;C3 73;B4 4 0 87;A2 14 61 89 20;B4 0 17;A1 26 50 64;B7 17;C3 6;D0 0 N1+18 109;D4 7 11 6;A3;C2 39;C4;} 4>&2 2>/dev/null;);C5
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. If you don't know the password, or if you prefer not to enter it, just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, a series of lines will appear in the Terminal window like this:
[Process started]
        Part 1 of 8 done at … sec
        Part 8 of 8 done at … sec
        The test results are on the Clipboard.
        Please close this window.
[Process completed]
The intervals between parts won't be exactly equal, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message "Process completed" to appear. If you don't see it within about ten minutes, the test probably won't complete in a reasonable time. In that case, press the key combination control-C or command-period to stop it and go to the next step. You'll have incomplete results, but still something.
12. When the test is complete, or if you stopped it because it was taking too long, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but whatever else you're told to do may not be. For others who choose to run it, I don't recommend that you post the test results on this website unless I asked you to.
Copyright © 2014, 2015 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Time Machine takes up space on SSD

Hey guys,
First I wanna apologize if this has been addressed, I tried looking for it with no avail. Anyway, I had set up a NAS using my router, but it was formatted in NTFS so my Windows 8 laptop can use it as well.
Well after learning about the OWC SSD upgrade for the Macbook Pro Retina I decided that maybe I should purchase it, but I'll need to create a Time Machine back up so if I wanna restore it to the new SSD I can do so easily. I'm still unsure about the entire process, but I hope to learn it before I progress. I talked with both Apple and OWC and turns out this upgrade doesn't void any warranties, either from Apple care or origninal warranty as long as it's installed properly.
Anyway, after transferring everything from my external HDD to my SSD, I reformatted it to Mac Journaled then transferred everything back to the external HDD. Then I started my time machine backup.
After that completed, I unplugged it and carried on with my day. After restarting my computer I looked at my storage space and to my shock and dismay, I had over 100 GBs being taken up for 'backups' on my primary SSD and I couldn't figure out how to get rid of it.
By luck I turned off time machine and turned it back on and all that space was given back to me. I did another time machine backup several hours later and noticed 40 GBs were take up. Did the same thing (turning off and back on time machine) and the space was returned to me.
Basically why is this happening? Why is my internal SSD storing backups? Is this normal, should I ignore it and the system will remove this as needed? Or is it common practice to turn off and on the time machine to return that space back to me.
Thanks for the help and deeper understanding.
vahdyx

It's normal. Time Machine now stores local snapshots on portable Macs. The space used by backups is only used if there's space to do so - if you need the space for other file storage, they will be automatically deleted.
Matt

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

How does one get Time Machine out of a "Preparing to Backup" loop to actually doing a backup? thanks, AR

How does one get Time Machine out of a "Preparing to Backup" loop to actually doing a backup? thanks, AR

Hi..
Thanks for the reply..
My original I Phone 5 was running IOS 6.12
My I phone 5S currently runs IOS 8..When I upgraded it, it had IOS 7 on it which made the I Photo app compatible with everything below IOS 8...( which the photo app is not compatible with ) so I just connected the I Phone 5S to my computer and thinking the new phone had IOS 7 on it that these was nothing to worry about..I thought all 900 + pictures in the photo stream would transfer but somewhere in the process, I Tunes decides to just go and install IOS 8 which requires that you run a " Photo Migration App" to transfer photos from IOS 7 & below. The problem was is that I didn't want IOS 8 on my new 5S so I thought I wouldn't have to do that part..
Anyway the phone emerged with IOS 8 on it and the only photos that remained were the ones that were actually on the phone..The 900 + I had in the stream didn't transfer because the Photos that works on IOS 7 and below isn't compatible with IOS 8..I guess you have to use the photo migration app that comes with IOS 8 & I phone 6..But I didn't ask to upgrade to IOS 8...It just did it on it's own!
I still have the I Phone 5 Back up that I did just before giving it back to Verizon but if I try to restore the I Phone 5S running IOS 8 those photos in the stream will not go back on the phone because IOS 8 isn't compatible with the I Photos" that ran on IOS 7 and below..
So I have an I Pad mini that runs IOS 7..should I try and erase it...and put that I Phone 5 backup on it and pray the photos that were in the stream come back on it so I can transfer them back to my computer...then erase the I pad mini again and restore it using it's original backup that I have on the computer and the in the cloud?
I know this sounds confusing but I'm at a loss as to what to do..This is what I found ...http://support.apple.com/en-us/HT201386
but it doesn't help me..
Steve

Time Machine says Backup Delayed After Upgrading to Lion

Time Machine says Backup Delayed After Upgrading to Lion on both my Macs. It backs up fine when ever I connect to the USB drive but now seems to want to back up hourly when before weekly was OK. When it does not compleye an hourly backup it reports a delayed backup - failure on both machines. How do it revert back to it reminding me to do weekly backups?

I'm having the same issue with Time Machine on OS X Lion!
According to this webpage: http://web.me.com/pondini/AppleTips/LionChanges.html
Backups (i.e., Time Machine, SD, CCC, etc.) will only save the current "Version" of files.
The above statement sounds like the issue @iJRB and myself are having after upgrading to Lion where Time Machine shows the following error message below within "System Preferences > Time Machine"
@iJRB: Is this the error message you are seeing?

Time Machine does not start after external hard drive is connected

Time Machine does not start after external hard drive is connected

These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
Also bear in mind that:
1. restoring data over icloud takes time
2. iCloud is not designed as a replacement to Time Machine.

Time machine is non functional after last OS update

I am unable to back up my I mac. When I click on the TM button it brings up a prompt that says " You haven't selected a location for time machine backups". When i click "set up Time Machine" it brings up a new TM window that shows the TM is "off". When I click the option on the left that that says "select back up disc", it brings up a new window that has one option only "other Airport Time Capsule". If I click onto that it opens a new grey window with a globe on it and it says "no configured airport base stations have been found. Airport utility will continue searching". If I try to turn the TM to the on position it brings up the same window scenario described above. This worked fine since 2009 and with the last major OS update it went bad....
I was a pc guy before getting our macs and so this world is different, I have had NO problems with any of our macs since 2009, this is the first time and it started with the last OS update...our printer is not working either unless its hard wired to one of our 2 computers...again new issue since the last OS update. I have done a hard reboot on the Airport/TM and that didn't do anything. I wonder if it needs to be reloaded onto the IMAC, not really sure how to do that either.
Thanks for any help/consideration you could give. Peter

You need to do a full reset.. Yosemite wants to control and own everything.
1. Full factory reset.
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
2. It will now show up in Airport Utility.
Redo the setup but do not accept apple recommended names.. use short names, no spaces and pure alphanumeric.
3. Wireless should have WPA2 Personal with pure alphanumeric password.
4. Your computer share name is well advised to be short, no spaces and pure alphanumeric.. (just remember your windows days.. apple is now using windows networking by default.. they began in Mavericks. when did you problems start.. oh yeah.. in mavericks.. hmm.. connected?? I think so!!)
5. Make sure in network preferences for whatever connection you use IPv6 is set to link-local only.
6. Manually mount the TC in finder if you still cannot connect in TM. Do this using top menu, Go, Connect to server.
Type in AFP://TCname.local (TCname is your new short name.. local is default domain).
Or AFP://TCIPaddress (eg 10.0.1.1 the IP you can find by the summary on the TC in airport utility).
Type in and save the password for disk access in your keychain.. this is important.
7. If it stops the day after you set it up.. welcome to Yosemite.. reboot the TC.. make sure it is mounted in Finder and try again.
8. Use a replacement backup utility.. eg Carbon Copy Cloner to a USB drive.. much more reliable.

Time Machine and FileVault: Change after last Software Update?

Hallo there,
A lot of people seem to switch to Leopard because of Time Machine, but according to the reports, the user experience has got nothing to do with reliability. So let me describe what is going on here concerning Time Machine.
I am using the German Version of Moc OS X Leopard with all recent software updates installed. I will try my best to translate the messages in the user interface. As mentioned above, I work in a user account that is encrypted wih FileVault. For Time Machine I have a 320 GB USB Harddrive from Lacie. Since I am having a MacBookPro, the USB-drive gets connected when I am at home, which means 2 or 3 times a week.
With the first verion of Leopard, everything seemed to work like described: I had to log out of my account and Time Machine would start to write an encrypted sparsebundle to the USB-harddrive. Now, a few updaes later, the situation appears as follows:
1.) When I log out of my account, there is no message that Time Machine backs up my home directory; neither can I notice any activity from the USB drive.
2.) When I open the Time Machine configuration in System Preferences, it tells me in the line with the "Next Backup", that it will start, when "Mac is connected"; but even if the backup drive is connected, nothing seems to happen.
3.) When I click on the padlock in the bottom left corner of the preferenes panel of Time Machine, the padlock will have opened by itself the next time I log in to my account.
4.) When I open the backup drive in the Finder now, I can no longer find the encrypted sparsebundle; instead there is a new folder next to the "Macintosh HD" folder, that holds all the contents of my home directory unencrypted... but: its content is out of date!
If anyone here has an idea what all this means and if there is an option to get an automated backup that really works, I would be glad.
Thank you.

I can't comment on the history before 10.5.3, but FileVault and TimeMachine are working ok for me with 10.5.3. Not ideally, because TimeMachine backs up only after a log out, and because you can't use the snazzy galaxy interface to restore individual files. However, the problems here have been exaggerated in the blogs. It is easy (and even good practice) to get in the habit of logging out at the end of the day (or even more frequently, as at lunch). TimeMachine will then have a nice series of stored snapshots. Restoration of individual files, rather than the entire volume, requires--gasp--a bit of "manual" activity rather than "galaxy" activity. One opens TimeMachine, figures out what time slice is appropriate, and proceeds by double-clicking to get to the saved volume for that time slice. Then one double-clicks to mount it, entering the password. Then one goes into the mounted disk, finds the file or folder that had accidentally been deleted or corrupted, drags it to the desktop, and then drags it to wherever it should be. Not exactly a big deal. Compared to the non FileVaulted situation, it's clunky, but still very nice in comparison with most backups and infinitely better than depending on occasional backups.

Time machine back up failing after itunes update

I am having a massive problem with my Time Machine back up.
My set up is as follows
late 2011 Macbook Pro 13" running latest version of Yosemite
An older Airport Extreme running version 6. something (latest version)
Macbook connected via WiFi on the 5Ghz
Connected via USB to the Airport Extreme is a Western Digital 2TB hard Drive.
My last successful back was 5.40pm on 1st February 2015. The only changes to the system that have been done since that time is an updated to the latest iTunes version.
This is what is happening.
Time machine shows the disc as connected and that there is 905GB of 2TB avaialble.
When the back up starts it finds the disk, prepares the back up and than starts.
It states the back up is about 29GB in size (so more than enough room on the hard drive).
The back up begins and after about 10 minutes (or somewhere around 4 or 5 GB) the back up fails and a pop up window in top right hand corner comes up saying that the back up has failed as there is not enough room on the Time Machine Backup (that is what I have called the drive).
I have run it a number of times and always the same thing.
I have run a disk utility check on the hard drive and run a repair disk and veriofy disk and both stated that there drive was fine with no problems.
I have powered down the entire network, shut the computer down and rebooted the whole thing but still the same problem.
I can't think of anything else I can do. Any suggestions from anyone greatly appreciated.

Problem solved. Can't remember what I did though!

Time Machine no longer working after 10.5.6 update

i have a late 2008 mac book pro. the 10.5.6 update was the 1st big OS X update i did.
all went well apart from Time Machine,
1st problem Time Machine always try's to back up even when i'm not at home where my Time Capsule is.
2nd problem Time Machine cant complete a back up even thought it says its backup 10gb of 10gb is complete it never finishes the back up
any one else having the same problem. and have a fix to sort this out

I have the exact same problem since upgrading to 10.5.6. The time machine arrows start spinning, and then stop with the exclamation point. I look at the dropdown and it says "Latest Backup: Delayed"
When I open Time Machine Preferences, it tells me I have 32.2 GB of 232.7 GB available. And in latest backup, it says "Failed" with the little "i" in the circle. When I click the "i" it tells me "The backup volume could not be mounted."
When I actually look at the contents of the drive (which definitely is mounted) I see a 200GB file (the correct size) named [name of my computer]_[some serial number].sparsebundle. The stuff in brackets is replaced since I don't know if that's the sort of thing that I should post.
What seems odd (although I haven't looked at the volume enough in the past to know if it is odd), is that both the modified date and the creation date are March 27, 2008 which, I believe, is when I first started using time machine.
The only other thing on that drive is a folder, "untitled folder"
That's it. I'm not sure about whether it's trying to backup when not connected, but I think I remember that.
Do these specifics fit with what you can see about the current state of your backup?
Tom

Time Machine Out of Space After Updating To iLife 09

Similar Messages

Maybe you are looking for