Time Machine over network: can't see hard drive

I've connected an external firewire 800 drive to our server and then chosen it in Server Preference as a drive that users can backup to, however when I try to select it in the user's Time Machine prefs I can't see the drive. Any ideas?

Is no one else having this problem?

Similar Messages

  • I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine

    I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine
    and if it yes i want to know if i have 1TB hard disk to use the 500gb for time machine and the other 500gb for normal use

    thank you very much because i am considering to buy the porsche design hard disk 1TB and i want to have it for normal use and for time machine is a pitty to give 1TB for back up only again thanks and i know seperate the back and the working jobs are better but the i have to have 2 hardisks and i want only 1

  • Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion again?

    Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion on that new hard drive?

    Yes - I just did it the other night. Took five hours, but it finally finished and is working great.
    I sort of followed the instructions found here -->> http://pondini.org/TM/18.html.
    Also, if you want to have dual backups, see -->>
    http://pondini.org/TM/27.html.
    I say 'sort of' because I used Carbon Copy Cloner to do a block-level transfer. I just didn't want to get hung up with a Finder copy.
    Give CCC a try - you have to enable the block copy in Preferences before using this method, but I was quite happy with it. I used it to move over 1TB of TM backups from a FireWire 800 drive to a 2TB Thunderbolt drive. 5 seconds short of taking 5 hours.
    It should work well for you.
    Clinton

  • How Can I Migrate My Time Machine Backups To A New External Hard Drive?

    I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

    ivan wrote:
    How Can I Migrate My Time Machine Backups To A New External Hard Drive?
    I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
    Hi iVain
    Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
    Hope this answers your question. See:
    http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

  • My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

    My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
    The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
    I've run out of ideas. Help would be very much appreciated. Thanks.

    have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy....   google...." fcpx time machine problem"  Frist page link 
    http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
           You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
    booya!

  • HT201250 I have two external hard drives. One is my Time Machine backup drive.  The other I use for external storage of files (documents, photos, movies, etc).  Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

    I have two external hard drives. One is my Time Machine backup drive.  The other I use for external storage of files (documents, photos, movies, etc).  Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

    Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
    http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/

  • How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
    Click Time Machine
    Click Options
    Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
    The drive will be backed up on the next Time Machine pass
    Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

  • Can I use time machine to back up via a hard drive connected by USB to a HomeHub router?

    Can I use time machine to back up via a hard drive connected by USB to a BT HomeHub router? Is there a better way to back up and store files than via the USB port on my new MacBook Pro? I'd like storage to be accessible from my earlier version MacBook too.

    I think you want to make backups without connecting a hard disk via USB. In other words, you want to have the data storage be shared in your home wirelessly.
    If this is the case, I recommend using a Time Capsule.
    Time Capsule works great with Time Machine. You can set up all your devices to automatically make backups on the Time Capsule wirelessly and effortlessly.

  • Can Time Machine back up a second external hard drive that is attached via usb to a Time Capsule?

    Can Time Machine back up a second external hard drive that is attached via usb to a Time Capsule?
    I have a iMac with 10.7.4

    I want to back up the data on the external Hard Drive that is attached to the Time Capsule to the Tim Capsule using Time Machine.
    Thanks for the clarification.  Unfortunately, that will not work.  You will need to connect the drive directly to your Mac if you want Time Machine to backup the drive to the Time Capsule.

  • How can I delete time machine back up from my computer hard drive

    How can I delete time machine back up from my computer hard drive?

    How to Delete a Time Machine Backup - YouTube
    If you want to remove an entire Time Machine backup on a backup drive, then the easiest way to do that is to erase the backup drive using Disk Utility. However, this will delete everything on the disk:
    Drive Erase Snow Leopard and Earlier
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
    2. After DU loads select the volume you wish to format from the left side list. Click on the Erase tab in the DU main window.
    3. Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.

  • How do I set up Time Machine to backup to an external hard drive on my wireless router?

    I have just set up an external hard drive to my wireless router and am now wanting to set up Time Machine to back up to the hard drive.  I can see the hard drive in Finder and can even send files to it manually.  I just don't see in setting up Time Machine any option to backup to that hard drive.  Is it even possible?

    Well, I figured out a way around it that works for me but may not be suitable for everyone.  Instead of connecting the external hard drive to the router I tried connecting it directly to my computer.  I then right-clicked the hard drive's folder on my desktop, clicked "Get Info" and checked the box that says "Shared Folder".  I then went to the bottom of that window and under "Sharing & Permissions" and next to "Everyone" checked that they could all "Read and Write".
    The hard drive is now shared over my network, so when I got on one of my other Mac's that I was wanting to set up Time Machine with, the Time Machine Application had no problem finding the hard drive and backing up to it.
    I have all computer's setup for file sharing too, so that may need to be checked as well.
    This was a simple enough fix but the reason I said that it may not be suitable for everyone is that the other computer's backing up to this hard drive via Time Machine is now reliant on my computer being turned on.  I'm okay with that though.

  • I have a time machine backup file on a USB hard drive.  I bought a time capsule / airport extreme, flat 3TB.  I wish to transfer the backup file from the usb hard drive to the time capsule hard drive.  10.6.8

    I have a time machine backup file on a USB hard drive.  I bought a time capsule / airport extreme, flat 3TB.  I wish to transfer the backup file from the usb hard drive to the time capsule hard drive.  10.6.8

    Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
    Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
    It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
    http://pondini.org/TM/18.html
    Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
    Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
    My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason.  At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups.  At that point, you can erase the USB drive and use it for another purpose.

  • Time Machine says both of my external hard drives require reformatting to case insensitive. What do I do?

    I have been successfuly using Time Machine to back my iMac  to an external hard drive (via usb) and everything has been fine for the last year. I have been using TM to back up to a HD called Terra LaCie via usb.
    A week ago, my iMac hard drive was full--so I spulrged and bought a 6 TB external hard drive (Western Digital My Book-Thunderbolt). I set up the new Thunderbold HD to use RAID 1 (mirror) and copied most of my iMac hard drive over to the Thunderbolt HD.
    I kept my working photographs (most recent) on my iMac and felt good to know my older photographs are on my new Thunderbolt hard drive.
    For a few days, Time Machine seemed to work fine (backing up my iMac to Terra LaCie HD. I haven't been concerned with backing up the Thunderbolt drive (as I feel that mirroring is same as backing up).
    Yesterday, Time Machine indicated the lastest back-up failed (for the HD called Terra LaCie). Now, when I go into Time Machine, the dialog box indicates the following message:
    "Are you sure you want to erase the backup disk “Terra Lacie”? Erasing will destroy all information on the disk and can’t be undone.
    The disk must be erased before it can be used for Time Machine backups because a disk you are backing up is case sensitive, but the backup disk is not."
    When I open Time Machine to look at my external hard drives (I also have a third usb portable drive); two of the three drives indicate the following:
    "reformat required; case insensitive disk".
    The small, portable hard drive (that I'm also using) doesn't say it needs to be reformated (but my new Thunderbolt and my old usb HD both indicate the same message (above).
    What should I do? I just spent days transferring my photographs from my iMac to my new Thunderbolt. Should I just not use Time Machine any longer and work from my Thunderbolt drive?
    Am I to understand that my iMac suddenly become case sensitive? Sorry if this was too much information about my hard-ware set-up.
    Any help someone can provide me would be greatly appreciated. I suppose I need to understand Time Machine and perhaps my Thunderbolt better.

    Hi BDAqua,
    Bravo, you helped me solve my problem.
    The Case Sensitive Disk was the small portable hard drive that I was using termporarily.
    I just disconnected it and I started TM machine and everything seems to be working just fine.
    Thank you very much!!!!

  • Time Machine not backing up other external hard drive

    Hi,
    I recently upgraded to Leopard and am trying to use Time Machine. I have one external hard drive that is used specifically for the Time Machine Backup, it's called "Backup Drive". The other hard drive is called "Captured Memories" and is used to store my graphic design files. Time Machine seems to backup my iMac because there is a folder called iMac and it contains the files, but the folder for Captured Memories is blank. I was getting errors saying that the backup failed but when I clicked the "Back Up Now" option on Time Machine, it doesn't list the error - but the Captured Memories folder is still blank so it didn't back up that external drive. I also changed the Spotlight preferences so that it does not search the Backup Drive.
    Both the Backup Drive and the Captured Memories drives are the same, they're both Seagate Free Agent Pro drives, 1TB each.
    The Free Agent Pro drives both have a sleep timer that I cannot adjust, does that have anything to do with why Time Machine won't backup the Captured Memories drive? If that is the case, what other software can I use to backup the Captured Memories external drive? I want it to sync to the Backup Drive because I am constantly saving and moving files around on the Captured Memories drive.
    I was using a Memeo backup software that came with the Free Agent Pro drives but the problem I was having is it would make copies of files rather than move them. For example, I have a folder on the Captured Memories drive that is called, In Progress and one that is called In Proofing. So once a project is complete, I move the file to the In Proofing folder. The Memeo software would copy the file to the In Proofing folder rather than move it. So I'd end up with 2 copies of the file, one in the In Progress folder and one in the In Proofing folder.
    Does anyone know how I can simply have the drive backed up like that?
    What do I do?
    Please help! I really need to make sure that the Captured Memories external drive is being backed up!

    I am having a similar problem. I initially set it up 3 days ago and had it back up just the iMac to Time Capsule (about 120 GB) which it did no problem (I initially had my LaCie drive excluded). I then un-excluded my other drive, where all my photos and music reside (about 130 GB). Since then, it keeps trying to back up about 102 GB each time. Looking at the list of backups it does not appear that it has ever successfully backed up the LaCie. I am not aware of any error messages, but I have not been home much. I normally shut down the computer at night but I have been leaving it on trying to let Time Machine do its thing. All I can say is that every time I am at the computer TM is running and it always looks like it is in the middle of backing up 102 GB (usually seems to be near the beginning, never seem to see it more than halfway done). Looking at the TM panel it says the latest backup was 2 days ago. I'd appreciate any advice!

  • I am having trouble installing.  downloaded Mavericks but it will not let me install to hard drive, says that is reserved for Time Machine.  I have an external hard drive, but disconnected that before download.

    I downloaded Mavericks but can't get past the install; it thinks my hard drive is reserved for Time Machine.  I have an external hard drive but dis-connected that before download.
    I have Time Machine turned off.

    Check to see if you have a file name Backups.backupdb on the disk drive.
    If the installer sees such a file it assumes that the disk drive is being used by Time Machine.
    Allan

Maybe you are looking for

  • How to download youtube videos?

    internet downloader for Firefox

  • How to disable trackpad when mouse attached?

    I used to be able to disable the trackpad when i was using a mouse by going into trackpad system prefs. With the new version of trackpad, I can't seem to do that. Is there a way to disable the trackpad when my mouse is attached?

  • How to start the ServiceRegistery and AccessManager

    I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) I used a Configure Now installation on my WindowsXP. Everything went fine and after installation I was able to go to http://localhost:6480/soar/index.jsp a

  • Problem with anonymous caller id in spa8000

    Hi, We have started to migrate our customer from pap2t to spa8000. Now we got an issue that we need help with. If we activating CID block (*67) the sip server will deny the INVITE I think it has to do with from and contact field. All parts is now ano

  • Dataguard server relocation downtime

    Hi Guys, We are using 2 Node Oracle 11g R2 RAC Cluster on windows 2008 as a primary site and the similar cluster congirations on the secondary site. we are relocating our Secondary Standby Database server to a different site. There will be a atleast