Time machine restore - can't re-download purchased music

My HD on my iMAC recently failed. Installed a new HD and restored from time machine - all is well.
Except - I had purchased 3 albums after the last time machine backup. In iTunes - iTunes Store if I search for those albums they show I purchased them. However, they do not appear in the iTunes - Purchased folder. I right clicked the Purchased folder and chose "check for available downloads" - nothing is found.
I am logged in with my Apple / iTunes ID and that is the same ID that was used to purchase the albums.
Accessing those albums is normal on my iPhone6 and iPad Air, but I can't find a way to re-download them to my iMac.

Hi, Erik MN.
Thank you for visiting Apple Support Communities.
Here are the steps on how to download your missing past purchases.
Download past purchases
http://support.apple.com/kb/ht2519
Cheers,
Jason H

Similar Messages

Error code 313, can't re-download purchased music, weird noise when clicking any link in itunes

So I just transfered my music from one computer to another using a external hard drive. When I went to the store I noticed a "swiping" sound (the sound you would hear when wiping glass basically) when ever I clicked any of the buttons in the store. Music, books, purchased...and it's only in iTunes. When I try to re-download songs from the purchased section it takes forever to load then says error code 3131. I tried downloading the newest version of itunes and then restarting my computer but neither helped.
I have a toshiba satellite that runs Windows 8.
Please help me!

FWIW, my problem downloading previously purchased music from iCloud appears to be resolved. To clarify my issue, and also to differentiate it from similar issues:
My error code was not 3131; “(3131)” appears at the end of the error message that was popping up when I tried to access purchased music. An Express Lane tech verified that I was receiving error 3259 (although this didn’t appear on-screen).
I have two machines but only one Apple ID, have not yet installed Lion, and purchased all of my music by individual song (no albums).
What I did:
Boot in Safe Mode
Ran Disk Utility
Installed latest version of iTunes (10.4)
Re-booted in Safe Mode (which disables anti-virus software and other utilities such as Little Snitch)
Turned off Firewall temporarily
Launched iTunes
When I launched iTunes in Safe Mode, my Purchased items did show up and I was able to download several songs. I rebooted in normal mode, turned Firewall back on and re-enabled Sophos Anti-Virus, Little Snitch, and the adware/malware programs I usually run; I’m still able to see and download my Purchased music (as well as apps and books).
I don’t know what really “fixed” the problem, but the Express Lane tech suggested that firewalls, web accelerators, ad filters or virus protection software might be involved. Express Lane wasn’t very “Express;” it took a week and a half and several complaints to get things moving.

Can no longer download purchased music from iTunes

I keep getting this message: There was a problem downloading. You do not have enough access privileges for this operation. Please check that the connection to the network is active and try again.
My connection is fine and this just started happening out of the blue. Can someone offer some direction here?

This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

IWork free with new purchase but not available after time machine restore

Tried to find the best place to put this and this is the best I can surmise.
iWork is now supposedly free with the purchase of a new Mac. I received a new MacBook Pro 2 days ago. The problem is, I wanted to keep all my old settings/apps/features/files without spending 2 weeks resetting everything back up, so I used time machine to restore my machine to the state of my old MacBook Air. Unfortunately, it does not look like any iWork apps remained in the Applications folder (makes sense), but now I go to the App store and Pages, Numbers, and Keynote are all listed as $19.99.
I only assume that my time machine restore was the issue (I don't know if the apps were ever in the Applications folder at all), but since time machine is a feature Apple supports I would assume they support some way to make this work as well. How do I go about getting iWork without paying $60?
Thanks

There are several reasons why the updates don't show as free for those who already have iWork '09 installed.
1. You must have iWork '09 apps installed & they must be updated to the x.3 version. You can also download the standalone updater from this page.
2. If you are not using English as the primary language for your Mac, change to English & run Software Update. You can then switch back to your preferred language.
3. Go to Mac App Store (MAS) > Click on Store > Check for Unfinished Downloads. You will need to individually click into each application > Click update > enter in your Apple ID & password and then it will start updating.
4. Open App Store on your Mac & look at the buttons under Keynote, Pages & Numbers. If it does not say “Update” click Account under Quick Links, enter your password & click “View Account.” Next, click the “Reset” button to the right of “Reset all warnings for buying and downloading” at the bottom of this page, & click Done. Check your updates tab & iWork & iLife updates should now appear.
These are the ones I've seen work for others.

Can I use a Time Machine restore from an older OS to Mavericks?

I ask because I tried about 2 years ago and had no luck. Here's a little back-story so my situation isn't confusing...
My iMac (2010) has been having tons of issues lately. More specifically, when I attempted to upgrade to Mavericks last week, it came back with S.M.A.R.T. errors after a scan, so it wouldn't allow me to update. So, in preparation for the HDD to crap out on me, I did frequent back-ups using Time Machine. Well, the day finally came and my iMac won't "turn on" anymore. When I turn it on, it sits at the Mac loading screen for several minutes and then just goes to a blank white screen. (NOTE: This isn't part of my question but if anyone has any suggestions on fixing this, please let me know, thanks!)
So, back to my question. If I buy a new iMac or a new macbook or whatever, will it be possible to use my Time Machine back-ups to restore everything on it or will it not allow me to because the operating systems are different? As mentioned, I attempted to make a restore on my friend's macbook that I purchased as a spare but when I tried, it came back saying "Different operating systems, cannot restore" or something to that degree. Is there a way around this? Do I have to somehow downgrade the OS on my new machine?
Luckily, I use iTunes for all my movies/music & Adobe Creative cloud so I can easily restore those on any machine but my desktop personal data, photos, etc are on the Time Machine restore. Help me if you can, thanks in advance!

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. They can also give you an estimate.
Genius Bar Reservation US

Had to wipe my drive so I could do a clean install of snow leopard Now I look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old sett d

Had to wipe my drive so I could do a clean install of snow leopard. Now I have look every where on how to move bookmarks, address book and I cal settings. I have them back up on a external drive with Time machine but can not move, copy or restore my old settings. The instructions I have found or no help or needs more clarafication on what to do.

Use migration assistant to move your files. http://support.apple.com/kb/HT4889

If I update from 10.6.8 to Mavericks and I have a time machine backup, can I do a full restore back to 10.6.8 and resume as if I had never updated?

If I update from 10.6.8 to Mavericks and I have a time machine backup, can I do a full restore back to 10.6.8 and resume as if I had never updated if there is a problem? Probably an answer I should know but I don't. Thanks in advance! (instruction suggestions welcomed)

Upgrading the OS is a system wide thing. So all users will receive the upgrade.
It should not delete files and such. However, if you have for example files made with Pages '09. Then the new Pages that comes with Mavericks will make a copy of those files so you can continue to edit them. But those new files can not be opened in Pages '09. BUT again, some people perfer Pages '09 and they use that still. Mavericks will just hide Pages '09, it's still usable in Mavericks just hidden.
To be safe, make a back up of your system before doing any major upgrade.
KOT

Can Time Machine restore to a new internal HDD?

hi all, i've got a 1tb external drive that's exclusively used by Time Machine. the 1tb drive is connected to my 500gb mac mini. i've been running time machine for 6 months now daily, i just wanted to know if it was backing up everything on my 500gb drive or not. how can i check that it's working properly?
also, does anyone know how i'd go about restoring my mac mini in case i had to replace the 500gb hdd? can time machine restore everything if i needed it to? if i bought a new HDD tomorrow for example, how could i get my system running back to where it was running today with all of the current settings and files etc? is there any way for me to check that Time Machine will actually restore OS X, all my videos, music and my work should the HDD actually die?
is there an apple link i can read?
thanks for any help.

To answer your question about replacing a hard drive and recovering what was on your old one ...
Yes, Time Machine was designed for that. You may have one of two scenarios:
(1) Your hard drive is replaced by the Apple Store or another Apple repair shop, in which case they usually restore it with the operating system you had before and configure it so it has a new system with no users set up; the first time it starts up it runs Setup Assistant. When Setup Assistant runs, you select the option to restore from a Time Machine backup. It will then automatically restore your entire hard drive to the newly installed one. Everything will be just as it was with the old drive. Exceptions: you MAY have to enter user keys for software like MS-Office and Adobe Photoshop. and you MAY have to reinstall your printers and scanners.
(2) If the hard drive is replaced but no operating system or anything is put on it, you need to boot from your Install-OS-DVD and install a new operating system on the new drive. Then, on the first reboot, Setup Assistant runs and you can follow the instructions from (1) above.
A good informational site about Time Machine is here: http://pondini.org/TM/Home.html
How do you know that your Time Machine backup is a good one? You can peruse through all the backups by running Time Machine and manually inspect that the files in those key folders (photos, music etc.) are all there and have the right sizes. You can "test recover" selected folders to a scratch location just to check that it works. I suggest you obtain another external drive and use it to make a "clone" of your internal drive using SuperDuper or Carbon Copy Cloner. This is like a second backup, a failsafe in case, say, your Time Machine drive were to fail. This is not unheard of, since a power failure could cause both your internal drive and Time Machine drives to crash at the same time. The "clone" should be unplugged and stored separately to avoid this issue. You can update the clone, say once a week or once a month.

Time machine How can a make archive so I can restore if needed?

time machine How can a make archive so I can restore if needed?
I have had time machine disappear several times in the past
I would like to make an archive so if needed I can restore the oldest parts of the files.

They are mutually exclusive. I run my bootable clones on an occasional basis although they can be scheduled. If you put them on one external drive, partition it so each has its own space.
Barry

HT3275 I backed up by computer to an external HD and lost all my data from TC. I backed it back up FROM the external HD, but I lost the dateline on Time Machine. Can I restore the dates and timess of my backups?

I backed up by computer to an external HD and lost all my data from TC. I backed it back up FROM the external HD, but I lost the dateline on Time Machine. Can I restore the dates and timess of my backups?

Another one that Apple doesn't make obvious.
See #E3 in Time Machine - Troubleshooting.

Time Machine help - Can't find my stuff after restore

I've backed up from Time Machine but can't find of my stuff. all applications are bare, no vid/pics etc. My macintosh hd stoage is showing mainly as 'other'. Can anyone help me get my computer back please?!

Hi there, thank you.
I'm guessing not as there is no other user account. I'm at a total loss, is there a way of finding it all or would it be better/easier/quicker to wipe the computer of it's contents and restore from time machine using Migration assistant this time? I did try to use it after you suggested it but there is not enough free space on the iMac, it's being taken up by my hidden files. This is so frustrating

Can time machine restore in new HDD?

if i backup my mac os in an external hdd with time machine and then ill change my mac hdd, can time machine restore my os in new hdd?(for example by Recovery Disk Assistant)

Naming it the same tends to make things easier. Time Machine can backup your entire OS as long as you haven't excluded anything in System Preferences/Time Machine/Options.
Another option is to make a bootable clone. You should have more than one backup on 2 different drives since hard drives do fail.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested

I signed into icloud to find my iphone. icloud tried to upload my calendar, froze my desktop calendar and then erased it when I unchecked the box. I use time machine. Can I restore my desktop calendar and how to I keep everything but my phone locator off.

I signed into icloud to find my iphone. icloud tried to upload my calendar, froze my desktop calendar and then erased it when I unchecked the box. I use time machine. Can I restore my desktop calendar and how do I keep everything but my phone locator and mail off? I do not want to sync my desktop with icloud except for mail.

This the Activation Lock. Read here: http://support.apple.com/kb/HT5818
The only way is to login to iCloud with your computer browser and wipe the iPhone.
If you can't then you have a brick, Apple won't help and AL cannot be bypass.
https://www.icloud.com

Can't Boot After New HD + Time Machine Restore

So a couple days ago my 27" iMac running Snow Leopard started making some weird noises and stalling out. Annoyed, I talked for a couple hours with apple tech support which eventually lead me to run an Apple Hardware Test. This test returned the error
"Alert! Apple Hardware Test has detected an error.
4HDD/11/40000000 SATA(0,0)"
I scheduled an appointment at the Genius Bar, and they replaced the hard drive.
After that I got it home and did a System restore from my time machine backup. It finished fine, but when I restarted it got stuck on the grey apple screen with the spinning dial thing.
I called apple back and they had me do a couple things like repair disk, verify disk, and one person had me reboot into this command line mode and type some stuff in. Nothing worked. After that They had me try to reinstall the OS first from archive, and next by erasing the hard drive and doing it. Both times the install fails with a big yellow exclamation point saying that it couldn't install support files and the OS couldn't be installed.
Any ideas how to fix this?
I'm currently trying to restore from my time machine backup again, but I'm not hopeful.

Here's what I got - apologies for any formatting peculiarities.
The problem: 10.6.6 mac won't boot after time machine restore to disk.
Further symptoms: Booting with Command-v shows several errors: usually blued and loginwindow collapse with errors from launchd. Errors will be of the style "dyld: Symbol not found: CSSMOID_APPLE_TP_MACAPPSTORERECEIPT" and other CommerceKit / CommerceCore framework errors.
A solution: Your Framework Security library may be an older version (possible cause with Time Machine below). The easiest way to fix this is to find another, working 10.6.6 Mac, and update the Security library on the broken machine.
Identifying if you're affected:
1) Boot the broken machine into "target" mode - hold "Command-t" during boot until the [Firewire|http://itunesu.utah.edu/terms/images/Firewire_Icon.png] icon appears.
2) Connect the broken machine to the working 10.6.6 machine with a firewire cable.
3) On the working machine, the disk of the broken machine should mount.
4) Open Terminal
5) Run "ls /Volumes" - the name of disk you mounted should be there (in this example, we'll use "Macintosh HD".)
6) Typing in the path of the broken machine, run:
<pre>
nm /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security | grep random_fd | cut -d. -f2
</pre>
(this does a dump of the library, looking for the version value)
If this comes back with the value 22457 (or less?), your Mac is not booting because it does not have the updated version of the Security library, which is required in 10.6.6 since Snow Leopard added the Appstore / Commerce framework.
Fixing if you're affected:
1) First, make sure the working 10.6.6 Mac has a correct version of the framework:
<pre>
nm /System/Library/Frameworks/Security.framework/Versions/A/Security | grep random_fd | cut -d. -f2
</pre>
For 10.6.6, this should be at least "22458"
2) *Be extremely careful at this point* - Make sure on the mounted disk (not the machine you are working on!) run the following
<pre></pre>
2a) Make a backup of the broken library
<pre>
mkdir /Volumes/Macintosh HD/savedLibrary
cp /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security /Volumes/Macintosh HD/savedLibrary
</pre>
2b) Copy the working version over the non-working version:
<pre>
cp /System/Library/Frameworks/Security.framework/Versions/A/Security /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security
</pre>
3) Eject the mounted disk from the working Mac, disconnect the firewire cable, and reboot the "broken" Mac. It should come up.
If it doesn't, you have problem(s) that are probably outside the scope of this. I'd also suggest restoring your original security library that you saved off.
Suspected cause:
It appears that Time Machine never recorded the change to the Security library after the update. If the library hadn't changed, the machine should have failed to boot like it did after restore the moment a 10.6.6 update was applied.
Inspecting the contents of my Time Machine backups before and after updating shows that Time Machine never updated the Security Framework library - why is still not 100% determined, but restoring from it is definitely broken. Combing through the backup databases on my Time Machine disk:
(I upgraded to 10.6.6 on January 6)
<pre>
for name in 2010-12-30-093337 2011*
do
echo -n "In backup on ${name}, version of Security library is: "
nm "${name}/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security" | grep random_fd | cut -d. -f2
done
</pre>
In backup on 2010-12-30-093337, version of Security library is: 22457
In backup on 2011-01-04-100707, version of Security library is: 22457
In backup on 2011-01-05-082402, version of Security library is: 22457
In backup on 2011-01-06-092846, version of Security library is: 22457
In backup on 2011-01-07-094827, version of Security library is: 22457
In backup on 2011-01-10-093559, version of Security library is: 22457
In backup on 2011-01-11-110542, version of Security library is: 22457
In backup on 2011-01-12-094137, version of Security library is: 22457
In backup on 2011-01-13-103238, version of Security library is: 22457
In backup on 2011-01-14-113145, version of Security library is: 22457
In backup on 2011-01-18-112856, version of Security library is: 22457
In backup on 2011-01-20-114953, version of Security library is: 22457
In backup on 2011-01-21-103642, version of Security library is: 22457
In backup on 2011-01-24-102321, version of Security library is: 22457
In backup on 2011-01-27-002508, version of Security library is: 22457
In backup on 2011-01-27-011931, version of Security library is: 22457
In backup on 2011-01-27-104406, version of Security library is: 22457
In backup on 2011-01-27-114322, version of Security library is: 22457
In backup on 2011-01-27-123928, version of Security library is: 22457
In backup on 2011-01-27-134523, version of Security library is: 22457

Time Machine Restore with downloaded Lion 10.7

Hello,
I have a laundry list of questions, I hope you answer one for me, thanks.
My system disk has version 10.6.2 , and I'm pretty sure when I booted from this disk,
it presented a large icon saying it was 10.7, is this true or imagination?
Anyway, I had some sort of virus or other problem that forced the imac to keep
flashing the restore window modal panel, I couldn't resolve it by clicking on anything,
so I did a restore from a month old backup.
Questions
It restored the system to 10.7, because that's what the backup copy was. But,
booting from the disk and following through the prompts, it was asking if I wanted
to continue and instal version 10.7, (from my original system disk), how is this
possible? Or rather, this confused me, because I didn't have any idea what version
number coresponded to the latest Lion(10.7)
So I opted to do the Time Machine restore.
So, did I have to use time machine, or could I have continued with the system disk instal,
and gotten the latest version 10.7, AND not lost all my files since this last backup?
I lost some files, and I don't think I would have needed too.
So far it looks like all my software has been restored, and everything Mac seems to be working.
Parallels isn't quite working yet, but it looks close.
Thanks again for any info.
Your heart really does start to beat when the computer starts getting dodgy...

How do I restore my entire system?
Regards,
Colin R.

Time machine restore - can't re-download purchased music

Similar Messages

Maybe you are looking for