Time Machine restore of File Vault encrypted user failed: Login failed due to an error.

Hello everyone,
I did regular time machine backups of a File Vault (version one) encrypted user folder. Now I needed to restore a few files that have been deleted unintentionally. Since single files can't be restored from a File Vault encrypted backup time machine told me that I must restore a complete backup from a certain time. I did that. Time machine quited to copy at about 25 percent and rebooted. Everything was looking good until I entered my password for the recovered user. Then I got the answer:
"Logging in to the account failed because an error occurred"
And now?
I tried to restore some other backups, none was working. I copied the relevant .sparsebundle file out of the backup folders and tried to mount it. Didn't work. It says "not recognized". Then changed it's owner to root and tried again, the same answer. I tried to repair it by using hdiutil but it also says "attach failed - not recognized".
Apple, I am asking you: Are my data lost?
Anyone, please provide help.
(Apple, it's more than a shame what you are providing for the safety of a user's data!)

Try Repairing the backups, per #A5 in Time Machine - Troubleshooting.
If/when you get this sorted out, strongly consider switching to File Vault 2. It works much better, especially with Time Machine.
Or, if possible, only encrypting a few sensitive items, per Protecting confidential documents in a secure disk image.
Message was edited by: Pondini

Similar Messages

Time machine restore breaks file vault

Running Lion GM for the last few weeks on 2011 MBP w/500 GB drive. Decided to upgrade my drive to 750 GB and used TimeMachine to restore.
Had to boot SL (since Lion update isn't bootable by default and the dmg isn't on my local laptop) to launch the full TM restore.
TM had no problem restoring and everything worked fine until I tried to encrypt using File Vault. This was working on my 500GB drive.
When I try to enable, I get the following error:
FileVault can’t be turned on for the disk “Macintosh HD”.
Some disk formats don’t support the recovery partition required by encryption. To use encryption, reinstall this version of Mac OS X on a reformatted disk.
The format I used when I created the disk was Mac OS Extended (Journaled)
After realizing I couldn't encrypt, I tried the command-R to boot the recovery partition and its gone.
So how do we do a TM restore for Lion to a clean disk?

This is how I fixed it on a Macbook Air 2011 (MBA). I couldn't use the MickeyPhelps procedure here, because for the the MBA there is no way to create an installer image.
The procedure assumes you have a WiFi or Ethernet connection to the internet.
1. Restore your Time Machine backup. This will invalidate recovery HD, FileVault is gone and cannot be enabled (see original post).
2. Boot to recovery mode using CMD-R. The MBA will load the recovery partition data from the network.
3. Use the Disk Utility to create an image backup of the system partition (Macintosh HD) on an external drive
4. Boot using Option-CMD-P-R to reset PRAM. Not sure if this is always required, but for me it was. Otherwise I got an error that OSX could not be installed because recovery HD could not be created by the installer.
5. Boot to recovery mode using CMD-R. The MBA will load the recovery partition data from the network.
6. Using Disk Utility, first delete the "Macintosh HD" partition, then re-create it. Not sure if this is really necessary, but I did it this way.
7. Re-Install Mac OSX Lion. (takes a couple of hours depending on your network)
8. Omit the OSX configuration and boot using CMD-R. Should be fast because recovery HD has already been recreated.
9. Use the Disk Utility to restore the subsequently created image backup to the system partition (Macintosh HD) from the external drive.
10. Boot. That's it. You can now turn on FileVault.

Time-Machine Backup of File-Vaulted Account - Problem?

This is the situation:
I have to install the last good backup from Time-Machine. I did this but my drive was encrypted using File-Vault.
Now I cannot get past the login to my account at startup!!!!
My password is CORRECT.
I am the only user.
The login will take my password but will not progress any further past the following error message:
"Unable to log into the File-Vault Account "....." at this time. An error has occurred."
Has anybody out there heard of this happening? Does anybody see a picture of what is going on - or what could be done?
Can I ever get back my old account (complete with emails/apps/keychain/doc etc?????!!)
Regards
Greg.

O.K - So I'm now up and running again with a new installation. The Factory default installation disk has been installed.
I still have my Time-machine backup on my portable drive. The applications folder is accesible. All of my old apps are still there even though it was an encrypted HD. However, everything else is missing! iPhoto's !!!! Work documents! movies! itunes downloads etc etc...nothing in my old home folder and personal libraries are there - just the encrypted files.
Any ideas from here?

Time Machine Restore individual files after reformatting

Is it possible to restore individual files to my G5 iMac after i reinstall/reformat OSX on it?......i dont want a full restore
The time machine is currently backing up this G5 iMac

Do you really need to erase and start over?
It's rarely required on OSX, and rarely accomplishes much.
If you're having performance problems, it's almost always better to address them directly. As Kiraly, a frequent poster here says, if your kitchen faucet is leaking, start by replacing the washer, not tearing out the entire kitchen!
If you reinstall OSX and don't transfer your user accounts from your backups when it first starts up, via +Setup Assistant,+ (per #19 in but instead set up a user account "from scratch", that account may not be recognized as the one on your backups, so won't have permission to view or restore much, if anything, from them.
Even if it is, see the pink box in #11 of [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for a rough outline of what you'll be looking at doing.
See #19 there for info on +Setup Assistant.+

Time machine restoring empty files

Hey guys
I'm sure i'm not the only one having this problem but i can't find any fixes for it.
After a clean install from the snow leopard cd i go to my time machine to restore just the basic folders i.e. itunes / iphoto etc but it's not working correctly, i'm getting half of the contents if any at all, it seems to be just a folder with nothing inside.
Does anyone know a fix for this or is anyone else having the same problem?
I'm thinking of going back to leopard because so far i've had nothing but problems with it, in fact they should have called it Leopard Vista

Thanks for the reply guys
I found a fix to my problem.
I copied the files from time machine to another external drive and the installed everything again from the snow leopard disk, i then just copied over the files i wanted from that drive onto my mac with no problems, everything is speedy again, it's all organised how i want it, it was a pain to do but i'm happy now.
The reason why i did not use the back up or migration assistant was because i'm sure i had a conflict somewhere slowing down the mac and it's nice to know you have a nice clean machine the way you want it.

Time Machine restore from WD my book live duo

Dear all and especially anyone out there who may be able to help me.
I have a MacBook Pro with Mountain Lion, a WD mybook live duo 3/6tb on the LAN, all wired.
It has been backing up through Time Machine fine until my MacBook crashed earlier this week so I have a fairly
recent snapshot of my MacBook before the crash.
I wanted to restore, after a Hard Disk erase which seemed necessary, from Time Machine but I couldn't make it work
as it kept asking me for user names and passwords of the NAS (which I entered of course) only
to result in error meesages saying the 'share' didn't exist. (Despite the fact that it does immediately
recognise the backup and location on the NAS.)
WD support advised me to first reinstall OSX ML and then use the regular Time Machine
functionality to restore my Mac.
- there is no option to fully restore your Mac through the wonderful TimeMachine time travel
functionality. I tried to restore my Macintosh HD back to a recent time point but that resulted in
nothing much (or nothing at all, I don't know). I don't see my old stuff, I still see a kind of vanilla
OSX ML installation.
- using the restore functionality (CMD-R during startup) and the time machine restore option,
results in the same nagging for names and passwords and error messages that the share
doesn't exist.
WD support couldn't tell me what the share name (and possibly password) would be for where it stores Time Machine backup
files (it doesn't show up in the list of shares when you look in the WD dashboard) and that makes sense to me as when you
tell Time Machine to use the NAS, it doesn't ask you for anything in terms of shares or passwords either.
So here I am: with probably a very good and recent complete backup at my disposal but no way of restoring it to my Mac.
So all I had and trusted to Time Machine is lost.
Is anyone out here who can help me? Anyone with a similar experience and hopefully solution? (That I can understand....I am a Mac user! :-) )
I would be enormously grateful!
Greetings from Amsterdam,
Eric

Hello Eric, not sure if this helps or is exactly what you are looking for as I am unfamiliar with the NAS issue you have. However, I recently restored my computer from Mavericks back to Snow Leopard using my WD mybook. At first I was unable to use the WD mybook for restore, as is was not recognized by the computer after the menu came up from pressing "command R" during start up. I attributed this to the WD software requiring a password to access the drive. This is the same password that you (anyone who owns a WD mybook) have to supply each time you want to use time machine to back up files. There is a simple remedy I found. You need to go to your applcations and select "WD SmartWare," type in your password, then select the "Settings" tab at the upper right hand conner. Then select "Set up drive." On the right side of the window there is the "Set Security Options," sign in using your password in the box displayed under "password," then select "Remove Security." The last step would be to save the security setting, and you are all set to use your WD mybook without a password for full system restoration. So when you restart your computer and hold (or as I found press many times) the "command R" to access the restore window at start up, you can select restore from time machine, and have your WD mybook now appear in the timemachine device window, as the device is not password protected anymore. Once your computer is restored you can follow the same steps outlined above to reinstate your password for your WD mybook. Best of luck,
Marc

Can't Boot After New HD + Time Machine Restore

So a couple days ago my 27" iMac running Snow Leopard started making some weird noises and stalling out. Annoyed, I talked for a couple hours with apple tech support which eventually lead me to run an Apple Hardware Test. This test returned the error
"Alert! Apple Hardware Test has detected an error.
4HDD/11/40000000 SATA(0,0)"
I scheduled an appointment at the Genius Bar, and they replaced the hard drive.
After that I got it home and did a System restore from my time machine backup. It finished fine, but when I restarted it got stuck on the grey apple screen with the spinning dial thing.
I called apple back and they had me do a couple things like repair disk, verify disk, and one person had me reboot into this command line mode and type some stuff in. Nothing worked. After that They had me try to reinstall the OS first from archive, and next by erasing the hard drive and doing it. Both times the install fails with a big yellow exclamation point saying that it couldn't install support files and the OS couldn't be installed.
Any ideas how to fix this?
I'm currently trying to restore from my time machine backup again, but I'm not hopeful.

Here's what I got - apologies for any formatting peculiarities.
The problem: 10.6.6 mac won't boot after time machine restore to disk.
Further symptoms: Booting with Command-v shows several errors: usually blued and loginwindow collapse with errors from launchd. Errors will be of the style "dyld: Symbol not found: CSSMOID_APPLE_TP_MACAPPSTORERECEIPT" and other CommerceKit / CommerceCore framework errors.
A solution: Your Framework Security library may be an older version (possible cause with Time Machine below). The easiest way to fix this is to find another, working 10.6.6 Mac, and update the Security library on the broken machine.
Identifying if you're affected:
1) Boot the broken machine into "target" mode - hold "Command-t" during boot until the [Firewire|http://itunesu.utah.edu/terms/images/Firewire_Icon.png] icon appears.
2) Connect the broken machine to the working 10.6.6 machine with a firewire cable.
3) On the working machine, the disk of the broken machine should mount.
4) Open Terminal
5) Run "ls /Volumes" - the name of disk you mounted should be there (in this example, we'll use "Macintosh HD".)
6) Typing in the path of the broken machine, run:
<pre>
nm /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security | grep random_fd | cut -d. -f2
</pre>
(this does a dump of the library, looking for the version value)
If this comes back with the value 22457 (or less?), your Mac is not booting because it does not have the updated version of the Security library, which is required in 10.6.6 since Snow Leopard added the Appstore / Commerce framework.
Fixing if you're affected:
1) First, make sure the working 10.6.6 Mac has a correct version of the framework:
<pre>
nm /System/Library/Frameworks/Security.framework/Versions/A/Security | grep random_fd | cut -d. -f2
</pre>
For 10.6.6, this should be at least "22458"
2) *Be extremely careful at this point* - Make sure on the mounted disk (not the machine you are working on!) run the following
<pre></pre>
2a) Make a backup of the broken library
<pre>
mkdir /Volumes/Macintosh HD/savedLibrary
cp /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security /Volumes/Macintosh HD/savedLibrary
</pre>
2b) Copy the working version over the non-working version:
<pre>
cp /System/Library/Frameworks/Security.framework/Versions/A/Security /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security
</pre>
3) Eject the mounted disk from the working Mac, disconnect the firewire cable, and reboot the "broken" Mac. It should come up.
If it doesn't, you have problem(s) that are probably outside the scope of this. I'd also suggest restoring your original security library that you saved off.
Suspected cause:
It appears that Time Machine never recorded the change to the Security library after the update. If the library hadn't changed, the machine should have failed to boot like it did after restore the moment a 10.6.6 update was applied.
Inspecting the contents of my Time Machine backups before and after updating shows that Time Machine never updated the Security Framework library - why is still not 100% determined, but restoring from it is definitely broken. Combing through the backup databases on my Time Machine disk:
(I upgraded to 10.6.6 on January 6)
<pre>
for name in 2010-12-30-093337 2011*
do
echo -n "In backup on ${name}, version of Security library is: "
nm "${name}/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security" | grep random_fd | cut -d. -f2
done
</pre>
In backup on 2010-12-30-093337, version of Security library is: 22457
In backup on 2011-01-04-100707, version of Security library is: 22457
In backup on 2011-01-05-082402, version of Security library is: 22457
In backup on 2011-01-06-092846, version of Security library is: 22457
In backup on 2011-01-07-094827, version of Security library is: 22457
In backup on 2011-01-10-093559, version of Security library is: 22457
In backup on 2011-01-11-110542, version of Security library is: 22457
In backup on 2011-01-12-094137, version of Security library is: 22457
In backup on 2011-01-13-103238, version of Security library is: 22457
In backup on 2011-01-14-113145, version of Security library is: 22457
In backup on 2011-01-18-112856, version of Security library is: 22457
In backup on 2011-01-20-114953, version of Security library is: 22457
In backup on 2011-01-21-103642, version of Security library is: 22457
In backup on 2011-01-24-102321, version of Security library is: 22457
In backup on 2011-01-27-002508, version of Security library is: 22457
In backup on 2011-01-27-011931, version of Security library is: 22457
In backup on 2011-01-27-104406, version of Security library is: 22457
In backup on 2011-01-27-114322, version of Security library is: 22457
In backup on 2011-01-27-123928, version of Security library is: 22457
In backup on 2011-01-27-134523, version of Security library is: 22457

Time machine restore help

I've recently been having issues with my early 2008 black Macbook. I ran the apple HW diagnostics and determined it is a bad hard drive. I went out and bought a new 500GB SATA HD, and attempted to restore my system using a Time Machine backup. I booted into the Leopard Disc that came with my computer, formatted the drive, and ran the Time machine restore. Everything appeared to go fine (took about 2 hours, no error messages). However, after the machine rebooted and attempted to boot into OSX an error similar to this popped up. http://img149.imageshack.us/img149/7792/pict0017lo8.jpg
Any thoughts as to why this is happening? I don't really want to start over with a clean install, that's why I have Time Machine!
Other information:
My computer originally had Leopard, and was upgraded to Snow Leopard.
I have boot camp setup on my mac for Win 7. (I know this isn't backed up or restored as part of a time machine backup, which I'm O.K. with.)
Thanks in advance for all your help.

Any number of possibilities. First, did you prep the drive properly:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Any brand new drive should be setup per the above because they usually are configured for use on PCs rather than Macs.
Second, depends on how you went about the process of restoring your system. Select Mac Help from the Finder's Help menu and search for "time machine." Look for an article specifically about performing a full system restore. Also, see User Tips for Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
What you saw was a kernel panic screen. Panics at startup may be indicative of a hardware problem. You might give this a try:
How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error
To assure the problem isn't with your backup you might consider installing OS X by itself. If all is OK, then you can complete the TM restore using Migration Assistant.

Are my File Vault encrypted files backed up with Time Machine still useful?

The background:
My iMac G5 crashed. It all started one and a half years ago when my screen popped and the frequent hard shutdowns pobably damaged my HDD (the one elegant solution Windows have is the Windows button: press + 'u' + return = proper shutdown). After that episode I bought an external drive and started a Time Machine backup routine. What I did not realize, was the issues surrounding the use of TM with a File Vault encrypted system. In 2007 when I bought my G5, I poked around, getting myself familiarized in Mac OS X and found this thing called File Vault. It looked like something useful and I started using it. Later I upgraded my OS and after my screen problem, decided to make use of Time Machine. The one problem with Mac OS X is the ease of use. It's so easy that Apple probably cannot foresee all the dumb things we users are going to do with it, including a warning to first time TM users who have their system already encrypted with FV. Now, after searching the forums, I see the problems and the warnings. If someone use TM and then decide to use FV, a warning pops up, but not the other way around! At least, I never saw it coming. If there is such a warning, I probably did not read it - as I say, it all happens so easy and work so well, it's easy to use a Mac without reading the instructions. Yes, I did some dumb things, but that's probably because I'm not so dumb; too relaxed, yes. At least, so it seems to me : )
My problem:
Two weeks ago, my G5 suddenly started giving problems. Out of the blue I couldn't open Adobe Bridge. At first I thought it was a software problem and tried re-installing Bridge and searched the Adobe forums for a solution. After a long struggle trying different solutions, I eventually booted with my install disk and with Disk Utility found that there is a problem with my internal HDD. Only then it dawned on me that my problem is far more serious than a software problem but by then it was too late. I couldn't repair the HDD with DU and got an instruction to restore my system with a backup. No problem! I hooked up my external HD and pressed the button. The restoration took over 12 hours to complete. That in itself showed my that I have a big problem, but I did not dare interrupt the process. In the end I got a window with a 'Restart System' button. All I got from that was a white screen with a spinning wheel and that's where I am now. Needless to say, my G5 is now getting repaired.
My solution:
I have to keep going so I used my savings to buy another Mac. I have my backups, so I'll just do a Migration and keep working. Or so I thought. When I tried it, it obviously failed because I sit with encrypted backups that would only restore to the original machine - which crashed! After reading about it on the forums, it dawned on me that it is, most probably, a futile exercise. My backups are, most probably, no backups at all, because I also did not realize that I had to 'log out' of my FV to get TM to properly backup my files! In never dawned on me that I should log out! I have one machine at home and have no particular reason to log out at all!
My question:
Am I wasting my time with the 'backups' I have? Should I wait for my G5 to get back from the shop and see if they are useful, of should I just move on and try to live the rest of my life without all the electronic data I lost?

Gorrelduik wrote:
But they missed one situation: if Time Machine is set up, but auto backups are turned OFF, there's no message. If you turn it back on, there's no message then, either.
. . . and that's exactly my MO! I still don't have auto backup turned on. If it's better to use auto backup I'll do it, but to my mind it's better not to have both my computer and my backup disk on all the time. What happens when there is a power failure or lightning strike and both are on and both get damaged? My MO is to make a manual backup once a day and then put the external HDD away.
That's one of the reasons not to rely on a single backup, no matter where it is or how it was made. All hardware fails, sooner or later, no backup app is perfect, and things like lightning, fire, flood, and theft happen, too.
With a desktop Mac (and a U.P.S. system that both the Mac and External HD are on), you can let TM do it's hourly backups (although that won't help a lot with the current incarnation of File Vault), then keep secondary backups on a separate HD, perhaps a portable one, with a different app. See #27 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum), for some suggestions.
I have thought of doing another weekly backup on a different external HD that I keep at the office, but I'm still procrastinating that one. Now that I think about it, does Time Machine cater for that: having two backup routines on two different HDD's?
You can do that, but you must tell Time Machine each time you want to "swap" drives. But each will be complete and independent.

Time Machine not backing up File Vault encrypted iMac

I recently turned on File Vault and performed backups to my Time Capsule via Time Machine. Although slow it did back up several times. However because of it being slow I followed some advice which said to restart my iMac in Safe Mode and then do a normal restart,which should then speed up the back up process. Well, I did this and it did not make any difference other than now it gets to the end of the back up and starts again, with about completing backup!
So, I'm thinking is it because of File Vault, or is there something else I can do to make sure of being able to perform a backup via Time Machine. I am currently using Lion 10.7.5.
I assume that the backup (if it ever does another one) will also be encrypted as the option in Time Machine to encrypt is greyed out. Any thoughts here?
I thought maybe I should turn File Vault off and try again, but that sort of misses the point if I want to protect my data.
Help please.
Much appreciated - Alani

Alani wrote:
I recently turned on File Vault and performed backups to my Time Capsule via Time Machine. Although slow it did back up several times. However because of it being slow I followed some advice which said to restart my iMac in Safe Mode and then do a normal restart,which should then speed up the back up process. Well, I did this and it did not make any difference other than now it gets to the end of the back up and starts again, with about completing backup!
Does it fail, with a message? If so, what message? If you don't remember, see #C2 in Time Machine - Troubleshooting.
If not, a clue may be lurking in your logs. Use the widget in #A1 of the same link to display the backup messages from your logs. Locate the backup in question, then copy and post all the messages here.
Is it any faster if you connect via an Ethernet cable, instead of wirelessly?
I assume that the backup (if it ever does another one) will also be encrypted as the option in Time Machine to encrypt is greyed out. Any thoughts here?
No. Mountain Lion can encrypt network backups, but Time Machine on Lion can only encrypt backups made to a local or directly-connected external HD.
I thought maybe I should turn File Vault off and try again, but that sort of misses the point if I want to protect my data
No, that will take a very long time and won't make any difference anyway.

Time Machine restore leads to strange file permission issues

I've had three Mac laptops over the last 8 years. It all started with an iBook. When I bought my first MBP I used the "migration assistant" to move my files over. I started using Time Machine when it was released. I then upgraded the hard drive on the MBP and used Time Machine to restore the data. Later, I bought another MBP and used Time Machine to transition all of my files.
Each Time Machine restore was flawless.
The problem comes from my most recent hard drive upgrade (details are below). After upgrading the hard drive on the second MBP I did a Time Machine restore, which appeared to complete without incident. However a couple of problems, which are probably related, have cropped up.
After clicking on Firefox.app I get "Profile Missing Your Firefox profile cannot be loaded. It may be missing or inaccessible."
The following message is printed to the console: [0x0-0x31031].org.mozilla.firefox[493]: Error: Access was denied while trying to open files in your profile directory. com.apple.launchd.peruser.501[275] ([0x0-0x31031].org.mozilla.firefox[493]): Exited with exit code: 1
I tried to delete my old profile from ~/Library/Application Support/Firefox and the problem persists. Running /Applications/Firefox.app/Contents/MacOS/firefox-bin -ProfileManager results in the same error.
The file permissions on the ~/Library/Application Support/Firefox directory are:
drwxrwxr-x 2 my_name staff 68B Feb 20 08:31 Firefox
I'm at a loss here because the permissions look correct. When I run the ProfileManager as "sudo" it starts correctly and let's me edit/create a profile for "root".
I've repaired permissions several times, and the disk utility (and Onyx) don't report any problems. A very similar problem occurs for MS Office problems. When I launch Excel (or any other office app) I get an error message saying that the MS Office Database can't be used. Also interesting is that it builds the font cache every time. If I'm not mistaken the font cache and Office database are also stored in profiles, but not under ~/Library
Short story long, after a Time Machine restore some apps can't seem to write profile information, but the file permissions look correct and Disk Utility can't find any problems with my new disk.
Any help or pointers would be great.
Here are the details on the new hard drive:
Capacity: 1 TB (1,000,204,886,016 bytes)
Model: WDC WD10TPVT-00HT5T1
Revision: 01.01A01
Native Command Queuing: Yes
Queue Depth: 32
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Rotational Rate: 5200
Medium Type: Rotational
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Verified
Volumes:
Capacity: 209.7 MB (209,715,200 bytes)
Writable: Yes
BSD Name: disk0s1
Macintosh HD:
Capacity: 999.86 GB (999,860,912,128 bytes)
Available: 668.89 GB (668,892,172,288 bytes)
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /

You might try the following to repair permissions in your Home folder. Disk Utility does not repair permissions in the Home folder.
To fix Home folder permissions
Open the Terminal application in the Utilities folder. At the command line prompt enter or paste the following command line:
sudo chown -R `id -un`:`id -gn` ~
Press RETURN. You will be prompted to enter your admin password which will not be echoed.

User Account Passwords Not Working Following Time Machine Restore

Hard Drive failed; restored using Time Machine, but the Passwords for two user account don't work. The "hints" are correct.
Help, please.
JD

Can they be altered from another admin account?
Sound like they were backed up when the drive was failing & we have some corruption.

File Vault encryption

File Vault encryption is stuck on Pause on intial start up of machine

Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
Then, from the menu bar, select
File ▹ Turn Off Encryption
Enter the password again.
You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
Mac OS Extended (Journaled)
from the Format menu.
You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

Old FileVault crashed my MacBook Pro, had to delete, reinstall and Time Machine restore failed. Trying to manually rebuild. No iPhoto pics, no iTunes music and NO DOCUMENTS found! Any thoughts?

Here's the ordeal. I'm running a 2007 MacBook Pro 17 inch with Lion OS. When I converted to Lion, I didn't have enough room on my harddrive to convert to the new FileVault, so I remained on the old system. Less than a week ago I reboot my computer because iPhoto seems to be stuck on "cataloging" my photos, though after days of letting it run, it doesn't do anything. After the reboot, my computer appears as if it had been reset to factory settings with all my programs gone, etc. I'm like, hey, I've got Time Machine, I'll restore it. After the restore is run, when I go to login, I get the dreadful error message, "You are unable to log into the FileVault user "John" at this time. Logging into the account failed because an error occurred". I searched the internet via my iPhone for suggestions and followed everyone of them, all the way down to erasing my harddrive and reinstalling Lion. So I get back into my computer and think I'm golden. I go to restore my computer via Time Machine and wham....I'm right back to that error message. I think, ok, I'll do it again. This time it messes us even more, giving me two login screens, one for the new Lion like before I restored the computer and then a second, as if it were restored, but unable to login. On top of that, I couldn't get back to the Command-R page! I thought I was really screwed! Well, I finally figured a way back, or maybe it was just that it finally decided to cooperate, I don't know, but I erased my harddrive again, and reinstalled again and thought, well, I'll rebuild manually by selecting what I want to restore from the Time Machine drive. I was able to get all my applications back and running, but to my dismay, I seemingly have lost all my iTunes music (except that which Apple has graciously setup to redownload now "thank you!) plus all my iPhoto's and even worse, all my DOCUMENTS!!!! Here I thought Time Machine from backing all this stuff up, but with over a years worth of back-ups I cannot locate any photos, music, or my documents on my drive to extract! Needless to say, I will never be using Time Machine again to back up my computer, I'll find another program or at least do it all manually. But my question is: am I looking in the wrong places for this files? Are they hidden under some unknowning folder that doesn't list it as music, photos or files? I can manage with the music, I can live with the photos because my wife has many of them on her computer and I have many uploaded to Facebook, but my files! My documents, thousands of them, many with information I won't be able to compile again, seemingly gone unless someone out there has any ideas?!!!
I even had iPhoto search the drive for photos and after hours of the barber shop pole spinning I cancelled the command for I figured it wasn't going to find anything.
If anyone has any suggestions, or if Apple, you are reading this and can provide some direction, I would greatly appreciate it.

Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

How do I safely stop a Time Machine Restore midway through?

I started a Time Machine restore from backup at about 1pm this afternoon.
After about 15 minutes of estimating the size of the files to be transferred, it gave me a 19hr estimate for transfer time. I had heard that it could take awhile, so I wasn't totally blown away by the number.
I'm backing up about 200 GB. Well, I'm about 2 hours into it, and the time remaining has been fluctuating from 19+ hours to 14 hours. I'm at about 18 hours right now.
I'm beginning to question the ethernet cable I'm using to transfer the data, and wishing I used a USB 2.0. I've also read up on a bunch of other threads about how painfully slow Time Machine can be, and there seems to be little rhyme or reason as to when it's slow vs when it's somewhat reasonable.
So, I guess there are two questions.
Question 1) Can I safely power down, swap cables, and retry? What happens to the data that's already been pulled over?
Question 2) Should I just let it run for the next 18 hrs? I've also read other horror stories where people return to their machines after the time estimated, and it's hardly budged.
Any help would be AWESOME! If i could give you a billion help points, i would!

majmanMac wrote:
Was doing a full restore from scratch - I lost a hard drive on Monday, and just got a new one put in. Turns out the estimate was about right, as I'm now writing this from my restored machine.
Yay!
I was restoring from a Time Capsule. For some reason I just assumed it had a USB port.
Ah, yes, it does, but it's for connecting a printer or USB drive, not a Mac.
My concern that i would come back to it this morning and find it still updating has been put to rest. Phew!
Glad it's sorted out, but it does seem like there may be a problem -- that's awfully slow. See #D2 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
And be forewarned: since you have a new drive, Time Machine's next backup will almost certainly be a full one, so remain connected via Ethernet. If there isn't enough free space for that, it will take an extremely long time for Time Machine to delete a lot of old backups to make room. You might consider manually deleting a lot of them, per #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

Time Machine restore of File Vault encrypted user failed: Login failed due to an error.

Similar Messages

Maybe you are looking for