Time Machine Restore to Different Hardware

I just replaced a crashed 20" Core Duo (first intel 20" model) with a 24" aluminum. I had full backups of the old system that I used to restore to the new system.
I didn't receive any errors, but I'm a little concerned that there may be issues with the OS X install because the original install was to a different hardware configuration. Should this be something to be concerned with or am I just worrying for no reason?
What triggered my concern is that I knew there was a firmware release for the display adapter released in Nov. for the adapter in the aluminum iMac (for the Radeon HD 2600). But when I ran software update after the restore, it says that my software was up-to-date. I tried to install the firmware manually, but it said that it wasn't required for my system. The firmware was released Nov. 15th and I picked the new iMac up yesterday (12/6). Is there a chance that the firmware was updated before I took delivery? I assumed not, since it still came with Tiger loaded and with a Leopard upgrade disk.
Does any of this make sense? Can someone tell me if this is nothing or is there a way to verify that I'm okay?
Thanks for your help,
Chris

Hi Chris,
As you are only concerned and not 100% sure that anything is wrong, and there is no concrete evidence that anything isn't working properly, I wouldn't worry about it for now. If your Mac is that new then first thing Monday I would call the Apple Support line and explain it to them. I believe the call is free during your warranty period. Make them earn their money.
pw

Similar Messages

App store and Safari not working after Time Machine restore to new hardware.

I just had to install a new hard drive to my mid 2010 imac. I restored with time machine. I cannot find the original OS disc. Upon restoring it appears there is a problem with the webkit framework as Safari, App store, and Skype all freeze upon clicking on them and after bouncing, they never open. Chrome is working. What do I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Time Machine restore to a different computer?

I blew out the power supply in my 5-6 year old iMac G5 in the course of an overseas move. I'll try to get it fixed, but it needed replacing anyway, so I have a new iMac on order. I have a full Time Machine backup on an external HD, and while I find plenty of guidance out there about doing a Time Machine restore to the same computer, what if you have a brand new computer? Presumably there will be some system stuff that I don't want to overwrite from the old computer, but I would like the data and apps. Any help?

Glenn Leishner wrote:
Thanks for the response. I haven't used Migration Assistant, but I read the instructions. So when it prompts you to plug in the other computer via FireWire, you just plug in the external HD with the TimeMachine backup on it? And it then lets you pull over the data you want?
yes. when you start Migration Assistant it gives you an option to migrate from a TM backup. just follow the instructions.

Can I use a Time Machine restore from an older OS to Mavericks?

I ask because I tried about 2 years ago and had no luck. Here's a little back-story so my situation isn't confusing...
My iMac (2010) has been having tons of issues lately. More specifically, when I attempted to upgrade to Mavericks last week, it came back with S.M.A.R.T. errors after a scan, so it wouldn't allow me to update. So, in preparation for the HDD to crap out on me, I did frequent back-ups using Time Machine. Well, the day finally came and my iMac won't "turn on" anymore. When I turn it on, it sits at the Mac loading screen for several minutes and then just goes to a blank white screen. (NOTE: This isn't part of my question but if anyone has any suggestions on fixing this, please let me know, thanks!)
So, back to my question. If I buy a new iMac or a new macbook or whatever, will it be possible to use my Time Machine back-ups to restore everything on it or will it not allow me to because the operating systems are different? As mentioned, I attempted to make a restore on my friend's macbook that I purchased as a spare but when I tried, it came back saying "Different operating systems, cannot restore" or something to that degree. Is there a way around this? Do I have to somehow downgrade the OS on my new machine?
Luckily, I use iTunes for all my movies/music & Adobe Creative cloud so I can easily restore those on any machine but my desktop personal data, photos, etc are on the Time Machine restore. Help me if you can, thanks in advance!

If you live near an Apple Store, make a Genius Bar appointment to have the computer tested. Supposedly there is no charge for testing. They can also give you an estimate.
Genius Bar Reservation US

Can't Boot After New HD + Time Machine Restore

So a couple days ago my 27" iMac running Snow Leopard started making some weird noises and stalling out. Annoyed, I talked for a couple hours with apple tech support which eventually lead me to run an Apple Hardware Test. This test returned the error
"Alert! Apple Hardware Test has detected an error.
4HDD/11/40000000 SATA(0,0)"
I scheduled an appointment at the Genius Bar, and they replaced the hard drive.
After that I got it home and did a System restore from my time machine backup. It finished fine, but when I restarted it got stuck on the grey apple screen with the spinning dial thing.
I called apple back and they had me do a couple things like repair disk, verify disk, and one person had me reboot into this command line mode and type some stuff in. Nothing worked. After that They had me try to reinstall the OS first from archive, and next by erasing the hard drive and doing it. Both times the install fails with a big yellow exclamation point saying that it couldn't install support files and the OS couldn't be installed.
Any ideas how to fix this?
I'm currently trying to restore from my time machine backup again, but I'm not hopeful.

Here's what I got - apologies for any formatting peculiarities.
The problem: 10.6.6 mac won't boot after time machine restore to disk.
Further symptoms: Booting with Command-v shows several errors: usually blued and loginwindow collapse with errors from launchd. Errors will be of the style "dyld: Symbol not found: CSSMOID_APPLE_TP_MACAPPSTORERECEIPT" and other CommerceKit / CommerceCore framework errors.
A solution: Your Framework Security library may be an older version (possible cause with Time Machine below). The easiest way to fix this is to find another, working 10.6.6 Mac, and update the Security library on the broken machine.
Identifying if you're affected:
1) Boot the broken machine into "target" mode - hold "Command-t" during boot until the [Firewire|http://itunesu.utah.edu/terms/images/Firewire_Icon.png] icon appears.
2) Connect the broken machine to the working 10.6.6 machine with a firewire cable.
3) On the working machine, the disk of the broken machine should mount.
4) Open Terminal
5) Run "ls /Volumes" - the name of disk you mounted should be there (in this example, we'll use "Macintosh HD".)
6) Typing in the path of the broken machine, run:
<pre>
nm /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security | grep random_fd | cut -d. -f2
</pre>
(this does a dump of the library, looking for the version value)
If this comes back with the value 22457 (or less?), your Mac is not booting because it does not have the updated version of the Security library, which is required in 10.6.6 since Snow Leopard added the Appstore / Commerce framework.
Fixing if you're affected:
1) First, make sure the working 10.6.6 Mac has a correct version of the framework:
<pre>
nm /System/Library/Frameworks/Security.framework/Versions/A/Security | grep random_fd | cut -d. -f2
</pre>
For 10.6.6, this should be at least "22458"
2) *Be extremely careful at this point* - Make sure on the mounted disk (not the machine you are working on!) run the following
<pre></pre>
2a) Make a backup of the broken library
<pre>
mkdir /Volumes/Macintosh HD/savedLibrary
cp /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security /Volumes/Macintosh HD/savedLibrary
</pre>
2b) Copy the working version over the non-working version:
<pre>
cp /System/Library/Frameworks/Security.framework/Versions/A/Security /Volumes/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security
</pre>
3) Eject the mounted disk from the working Mac, disconnect the firewire cable, and reboot the "broken" Mac. It should come up.
If it doesn't, you have problem(s) that are probably outside the scope of this. I'd also suggest restoring your original security library that you saved off.
Suspected cause:
It appears that Time Machine never recorded the change to the Security library after the update. If the library hadn't changed, the machine should have failed to boot like it did after restore the moment a 10.6.6 update was applied.
Inspecting the contents of my Time Machine backups before and after updating shows that Time Machine never updated the Security Framework library - why is still not 100% determined, but restoring from it is definitely broken. Combing through the backup databases on my Time Machine disk:
(I upgraded to 10.6.6 on January 6)
<pre>
for name in 2010-12-30-093337 2011*
do
echo -n "In backup on ${name}, version of Security library is: "
nm "${name}/Macintosh HD/System/Library/Frameworks/Security.framework/Versions/A/Security" | grep random_fd | cut -d. -f2
done
</pre>
In backup on 2010-12-30-093337, version of Security library is: 22457
In backup on 2011-01-04-100707, version of Security library is: 22457
In backup on 2011-01-05-082402, version of Security library is: 22457
In backup on 2011-01-06-092846, version of Security library is: 22457
In backup on 2011-01-07-094827, version of Security library is: 22457
In backup on 2011-01-10-093559, version of Security library is: 22457
In backup on 2011-01-11-110542, version of Security library is: 22457
In backup on 2011-01-12-094137, version of Security library is: 22457
In backup on 2011-01-13-103238, version of Security library is: 22457
In backup on 2011-01-14-113145, version of Security library is: 22457
In backup on 2011-01-18-112856, version of Security library is: 22457
In backup on 2011-01-20-114953, version of Security library is: 22457
In backup on 2011-01-21-103642, version of Security library is: 22457
In backup on 2011-01-24-102321, version of Security library is: 22457
In backup on 2011-01-27-002508, version of Security library is: 22457
In backup on 2011-01-27-011931, version of Security library is: 22457
In backup on 2011-01-27-104406, version of Security library is: 22457
In backup on 2011-01-27-114322, version of Security library is: 22457
In backup on 2011-01-27-123928, version of Security library is: 22457
In backup on 2011-01-27-134523, version of Security library is: 22457

Is it possible to boot or Time Machine restore from an external Thunderbolt disk drive?

(There are several questions - search for "?".)
I purchased a Seagate Backup Plus for Mac Desktop Drive 3 TByte with default USB 3.0 interface, and also acquired the Seagate Thunderbolt Adapter for Backup Plus Desktop Drives and Thunderbolt cable.
I do a redundant backup to the Seagate Drive using both Carbon Copy Cloner (nightly) and Time Machine (hourly) using its Thunderbolt adapter. BTW: One never knows when Time Machine will choke - see discussion titled, "UPDATED: Serious Time Machine bug on Mountain Lion", which I had; Rest In Peace Pondini (James Lewis Pond).
Booting from the external Seagate Backup Plus via Thunderbolt inteface from System Preferences -> Startup Disk:
I select the Time Machine OS X, 10.8.5 Startup Disk (Thunderbolt attached drive), click Restart, confirm my choice, the computer reboots, however, it reboots from the internal Macintosh HD OS X, 10.8.5, NOT the selected external Thunderbolt drive. The SSD drive was used as the Startup Drive, not the selected external Time Machine volume as indicated by the display free disk space command (df(1)) and seeing that the Macintosh HD OS X, 10.8.5 volume is mounted as root. That is very deceptive in that both the internal and external drives will appear in the same manner from a GUI point of view! OS X doesn't even inform me that it did not boot off the selected volume. This is the first half of the problem, that is, Is it possible to boot from an external Thunderbolt disk drive? In my case, the answer is deceptively No. Can anybody else boot off a Thuderbolt attached disk drive? Note that if I remove the Thunderbolt adapter, and attach the drive via its USB 3.0 cable, the MBP boots off the external Seagate Backup Plus just fine, as is expected.
Booting from the external Seagate Backup Plus via Thunderbolt inteface from boot-time "Option - Select startup disk" method:
When I restart the MBP using the startup Option key to select the startup volume, the externally connected Seagate drive ONLY SHOWS UP if it is attached with the USB 3.0 cable, not when it is attached with via the Thunderbolt interface. Can anyone else boot off a Thunderbolt drive with the startup Option key sequence? At least the MBP doesn't deceive me in this case - I know right away that the external Thunderbolt drive is not an option when connected as such.
Time Machine restore from the external Seagate Backup plus via Thunderbolt interface from the "command-R - Recovery Parition" method:
After booting from the recovery partition, I attempt to perform a Time Machine restore from the Thunderbolt connected Seagate Backup drive. When Time Machine attempts to present me with a viable backup Time Machine volume, the external Thunderbolt drive is never offered as an option. So I switch the Time Machine volume to use its USB 3.0 interface, and then Time Machine displays that drive as an option, and the MBP proceeds with the restoration as expected. The interesting thing to note is that while booted in the recovery partition via the Thuderbolt cable, the MBP Disk Utility may be selected, and the Thunderbolt attached drive may be operated on just fine. Can anybody else restore their MBP using Time Machine and the Recovery Partition via the Thunderbolt interface?
This is also a big problem for me in that I am forced to restore my MBP via Carbon Copy Cloner using the USB 3.0 interface, because I cannot even boot off that volume's Thunderbolt interface. Of course, the option may be that I could use yet another eternal USB 3.0 drive, boot from it, and then use Carbon Copy Cloner to restore the Macintosh HD via the aforementioned drive connected by a Thunderbolt cable, but that is less than ideal and not elegant, so I'm not going there.
Another side issue is that the commercially available program, TechTool Pro 7's eDrive, which I installed on the Time Machine volume, will not boot off that eDrive as advertised, but I won't got through those steps here, because that would be beyond the scope of this issue, however, I must say, It does not work either when the Time Machine volume is connected via the Thunderbolt interface, but works just fine when connected via the USB 3.0 interface.

If this helps anybody else make a decision about whether to consider Apple because of Apple's superior customer service:
Apple sells this entire line of drives right in their store, from 1TB to 4TB. I spent 1 and 1/2 hours, yesterday, confirming that the 3TB model IS NOT 100% Thunderbolt compliant. A MBP cannot boot, nor can it Time Machine restore from this drive, though EVERYTHING about the drive is normal.
Apple's South Coast Plaza store management had at least two responses to me personally about how to proceed:
1. Buy a different drive from another drive manufacturer, and to attempt to return the drive to COSTCO. A lead genius suggested going with GTech drives, for instance.
2. Wait for Seagate to fix their problem.
I told Apple management in the store that the drive is advertised as Mac Compatible (see picture) and that it is advertised as being a Thunderbolt drive (see picture). I pressed management that my purchasing decsion to get the best possible MBP Retina was based on the availablity of Inexpensive Devises (raID), and that not having this complete compatibility is a show-stopper for my needs, and that I wanted a refund. Their response? They needed to talk with "Merchendising" to see if they are on or off the hook for these kind of 3rd party assertions, and would get back to me.
I am not holding my breath.
Note: I do not hold this against the Geniuses that helped me, nor against the management I've dealt with, nor the upper level engineers that I've corresponded with through Apple Care - their problem solving skills were helpful - although I could have arrived at similar conclusions given enough $$$. (For instance, try a Lacie TB drive and see if that works - we did, and it did not work. Or, we have a different TB cable and a different TB adapter, let's try those - we did, and it did not work.) I blame myself for not doing enough homework before going with Apple's solutions.

How to backup from Time Machine of a different computer

I want to restore my emails from time machine from a different computer?

Look at the Pondini web site and it should be able to address all of your Time Machine questions.
http://pondini.org/OSX/Setup.html
Ciao.

Time machine restore help

I've recently been having issues with my early 2008 black Macbook. I ran the apple HW diagnostics and determined it is a bad hard drive. I went out and bought a new 500GB SATA HD, and attempted to restore my system using a Time Machine backup. I booted into the Leopard Disc that came with my computer, formatted the drive, and ran the Time machine restore. Everything appeared to go fine (took about 2 hours, no error messages). However, after the machine rebooted and attempted to boot into OSX an error similar to this popped up. http://img149.imageshack.us/img149/7792/pict0017lo8.jpg
Any thoughts as to why this is happening? I don't really want to start over with a clean install, that's why I have Time Machine!
Other information:
My computer originally had Leopard, and was upgraded to Snow Leopard.
I have boot camp setup on my mac for Win 7. (I know this isn't backed up or restored as part of a time machine backup, which I'm O.K. with.)
Thanks in advance for all your help.

Any number of possibilities. First, did you prep the drive properly:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Any brand new drive should be setup per the above because they usually are configured for use on PCs rather than Macs.
Second, depends on how you went about the process of restoring your system. Select Mac Help from the Finder's Help menu and search for "time machine." Look for an article specifically about performing a full system restore. Also, see User Tips for Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
What you saw was a kernel panic screen. Panics at startup may be indicative of a hardware problem. You might give this a try:
How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error
To assure the problem isn't with your backup you might consider installing OS X by itself. If all is OK, then you can complete the TM restore using Migration Assistant.

Time machine restore not complete

I had to get a new hard drive for my iMac. Time Machine restored all the files and programs, but not the settings, so my desktop, my dock, all the pointers in software like Apature, etc are wrong. Why didnèt all this come back with the restoreÉ Or how do I get it back without manually setting everything up again.
Thanks
Jeff

There is a bug for some users.. but not in Snow Leopard if you are using that as per your profile. It is Mountain Lion that is the issue.
See http://pondini.org/TM/D10.html
Did you Migrate or did you do system restore?
They are different. Settings will mostly not migrate.
See Q14 and start over to do a full system restore.
More info on migration here.
http://pondini.org/TM/14.html
http://pondini.org/OSX/MigrationProblems.html
Go back to the main directory of Pondini and read through his information..
Q14-17 here on how to restore from Time Machine is most important.
http://pondini.org/TM/FAQ.html

FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk

FCP X does not recognize projects and events on USB drive after a time machine restore of the MBP macintosh disk.
I upgraded from an i5 to an i7 15" MBP and restored my files using my time machine backup. All seemed to go ok, except I had to use the migration assistant because on the initial boot the MAC didn't recognize the backup database on the USB device. MAybe this is a hint.
Since when I start FCPX it too cannot finnd the project or event directories.
Before my upgrade, I had a choice of files either on the Macintosh disk or the 2TB USB disk.
Now only files on the Macintosh are accessible to FCPX. The USB drive is visible under events and project but it finds no projects or events.
Please help if you can.
Thanks
Barry

Thanks... alas no one has responded.
I think I have the structure that you are recommending.
I have a root level directory (Final Cut Events) with the files in them.
The puzzling thing is that it used to work before the migration!.
Anyway I'm going to move the contents to the root and see what happens.
On a slightly different note...
I also posted a question about CPU utilization. Can I ask a question or two?
While rendering a short clip, I noticed burst of disk activity when the render started (likely loading the media files into ram since I have about 4Gigs available, then almost no activity while the render is happening, then more disk activity when its done.
However the cpu activity is not as high as I would have expected since rendering requires a lot of cpu.
What is your experience? I know some render is done by the GPU, but in my older i5 the CPU was about 100%, now in my i7 its about 50%.
Please look at the attached utilization for CPU and disk activity.
Thanks for any thoughts... Barry

ALL Photos missing after Time Machine restore (help)

So, I accidently formated the wrong drive while in Windows, (big oops) which gave me the opportunity to take Time Machine for a test drive.
I put the DVD in, and was able to restore from the TIme Machine drive. Very impressed! Everything came back just as I had left it except - whats this? The default Leopard wallpaper instead of a picture of my son? Huh strange, I thought. Until I noticed I had no photos in iPhoto.
There seems to be reminents of photos in the iphoto database - the size is 1.3gb instead of the 7gb it used to be. But 0 photos in iPhoto 08.
I went into iPhoto and choose File/Browse Backups. I selected Nov 8th, which was the last day of my backup and showed all 7000+ photos, and clicked "Restore All". This brought up something odd - a 2nd iPhoto icon in the dock, which showed a progress bar for the restore. Once the restore was completed, I still had a 2nd iPhoto icon the the bar, which was iPhoto running - but no photos in iphoto! I exited the 2nd iphoto, which disappeared, and launched my normal Iphoto icon. Still no photos! (That just seems odd that it would launch iPhoto with a 2nd icon)
So, I moved my iphoto database, and launch iPhoto in order to create a fresh database - thinking maybe that was the issue. I then did File/Restore again, and went through the whole processes again, including the odd 2nd icon. Still, no photos! And another 1.3gb iphoto database!
Is it normal for a Time Machine restore to not include your photos? Surely you are not supposed to restore them separately from within Iphoto?
What do I do now? At this point, everything went very well - except no photos! Which is awful and not at all expected! 7000+ family photos! At least, if I ask iPhoto/Time Machine to restore 'all photos' you would think it would restore 'all photos' - not show a progress bar, and then show me no photos!
p.s. I just tooked at the iPhoto Library. The 1.3gb is in /Data/ which contains folders 2000-2007, my Events, and thumbnails of all the photos - but no actual photos (the 'Originals' folder is missing).
I then went back in time, and found the 8gb iPhoto Library database. I supposed I could copy it over manually via Time Machine, and not iPhoto's Restore/TM - but - i'm so far off track of how this should have went I don't know what to think!
p.s.s. So I did just that - copied the 8gb iPhoto Library manually from TM, and pasted it in place. I help down option, and launch iPhoto, selecting the 8gb library - and BOOM... no photos!
Something is #$%# up here.
Message was edited by: metzen79

This is what it says in the help file:
Reverting to a previous Mac OS X version
If you’ve used Time Machine to back up your computer, you can easily revert to a previous version of Mac OS X if you’re experiencing trouble after installing an update.
IMPORTANT: Reverting to the previous version of Mac OS X will erase any additions or changes you’ve made to the files on your computer after installing the new version of Mac OS X. To save new or revised files, copy them onto a different disk or back them up using Time Machine before you follow these instructions. Use Time Machine only if you’re reverting to a previous version of Mac OS X 10.5 (Leopard), since Time Machine is not available with Mac OS X 10.4 or earlier.
To revert to a previous version of Mac OS X:
Insert the disc you used to install the new version of Mac OS X, and double-click the Install Mac OS X icon.
In the Installer, choose Utilities > Restore System From Backup.
In the Restore Your System dialog, click Continue.
Select your Time Machine backup volume.
Select the Time Machine backup you want to restore. To restore your computer to the state it was in before you installed a new version of Mac OS X, choose the most recent backup.
Follow the onscreen instructions.
If you backed up any individual files as described under the Important message above, you can restore them now. If you backed them up using Time Machine, recover them using the Time Machine application. (You’ll find the Time Machine application in the Dock or in the Applications folder.)
Hope this helps
Denisimo

Will Time Machine restore software problems as well as data?

Hi all -
I've got a 20" aluminum (2007) iMac with Leopard (all updates installed) and Time Machine. I'm having a shutdown problem that I'm trying to resolve. Yesterday, the computer started powering itself off randomly, as if someone pulled the power plug. I ran both the quick and extended Apple Hardware Tests, and both came up clean (no errors). I'm thinking this may be a software problem.
I'd like to reload Leopard to clean up the software. However, I already tried doing a Restore via Time Machine yesterday, and the problem did not go away. I restored to the previous day - prior to when the shut downs started happening.
My question is - If I reload Leopard using the "Restore" feature of Time Machine, does that also copy any problems I had backed up in software to the reloaded system? My guess is yes, since all of my applications remain intact after the Time Machine Restore.
That said, I find Time Machine to be absolutely brilliant in its simplicity and functionality, and think it should be in every single computer user's hands.
At any rate, I'm fearing that I'm going to have to do a clean install and then reinstall all of my software manually to get a truly clean system, then restore data manually via my Time Machine backup. I hope I'm wrong.
Can anybody shed some light? Thanks,
Shelly

it really does back up almost everything, even broken files. Go back to the initial backup and restore from that. If that doesn't fix it, you've got hardware problems.
Crashes are one thing, hangs another, but actual shutdowns where the computer just goes completely off really indicate hardware problems. Software by itself won't do that, even if it's broken.
- gws

Time Machine restore stalling on brand new 15" MBP (OS 10.10.1)

Hi,
Just bought a new MBP 15" and thought the migration process would be as easy as it's been for me since the intoduction of Time Machine. However for some unkown reason the Time Machine restore in Migration Assistant is stalling about 60% through,,, (saying 26 mins remaining for hours now).
Has anybody encountered this on new computers running Yosemite? I am restoring from a Time Machine Backup via Thunderwire. Previous computer is in service with Apple, but was running the same version of Yosemite and all.
Thank you in advance for any suggestions!

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Can time machine restore in new HDD?

if i backup my mac os in an external hdd with time machine and then ill change my mac hdd, can time machine restore my os in new hdd?(for example by Recovery Disk Assistant)

Naming it the same tends to make things easier. Time Machine can backup your entire OS as long as you haven't excluded anything in System Preferences/Time Machine/Options.
Another option is to make a bootable clone. You should have more than one backup on 2 different drives since hard drives do fail.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested

Time machine Restore Issue

Hi, I recently started having some major operating system problems after installing the latest security update for OS 10.5.8 on my PowerMac G5. Im fairly certain that the download file was corrupted in some way because my substandard-expensive-archaic system that gives itself the undeserved title of "Internet Service" often loses bits of downloads and is generally very unreliable. Needless to say I decided to do a complete time machine restore. Thinking it was going to be as easy as it has been when Ive done it on other macs, I decided this was better than trying to fix the system issues (Which involved a repeated "There is no point for line" error about 45,000 times a day in the console logs, about which i could find no information). Anyway, I booted from my OS X dic and loaded time machine, selected my backup, and selected my destination drive and away we go! After about 2 and a half hours (which is to be expected with over 1,000,000 files totaling over 900GB of data) the restore finished....or so I thought. The screen said Restore Process Complete and the Progress bar cleared out but the restart button at the bottom of the window never showed up like it should. All I got was the spinning beach ball. So, thinking that the data had copied over and it should all be there anyway, I decided to force restart after waiting for about 2 hours for any progress. Upon restart I found that the newly restored drive was not bootable. Using Disk Utility on my OS X DVD I found that all the files were copied. So I tried it again, erasing the drive completely and then restoring from a backup with a slightly different time, and I got the same results. Any help would be awesome and ill be checking back to answer any questions about what info I may not have covered. Thanks!
PS: I looked around for a similar posting but all the ones I found were involving hangs during the restore process (IE: 64%) and I didn't see anything quite like this, so if this issue has already been discussed then sorry for the double post.

It sounds like something in your installation of OSX was corrupted, and got backed-up. So when you restore, you're restoring the problem.
Your best bet is probably to do an +Erase and Install+ of Leopard, then use +Setup Assistant+ when your Mac restarts to transfer all your users, data, apps, and settings from the backups. See #19 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
Then download and install the "combo" update, to get back to 10.5.8. Info and download available at: http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate Be sure to do a +Repair Permissions+ via Disk Utility (in your Applications/Utilities folder) afterwards.

Time Machine Restore to Different Hardware

Similar Messages

Maybe you are looking for