Time machine setup - how to change 'wireless network name' and settings?

I have moved laptop to Mountain Lion.
This is the first time to backup to Timecapsule.
I went to Settings then Select Disk and selected existing Time Machine.
It took more than 30 minutes and seemed stuck on 'Preparing ....".
I cancelled and tried to 'Setup Time Capsule not listed"...
The system recognised the Time Capsule but I see that the network settings is my old 'wireless network' name.
How do I change this to the correct network name and ensure that the settings are correct?
I think if this is corrected, the backup will work.
Thanks in advance.

On the Home screen of the product control panel, touch the right arrow ( ) to view more options.
Touch Setup ( ).
Touch Network .
Touch Wi-Fi Protected Setup .
Touch PIN .
Touch Start . The product displays a PIN.
NOTE:The product begins a timer for approximately two minutes to allow you time to enter the PIN on the networking device.
Enter the PIN on the WPS-enabled router or other networking device.
I work for HP, IPGHT specialist in Officejet and Photosmart printers.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" .....

Similar Messages

How to change the network name and line name on iPad 4?

Could anybody help me how to fix this problem?
Previously I used qb (a mobile network in Cambodia) for my iPad 4 (iOS 7.0.4 non-jailbreak) the network name is qb.
The problem is that after I changed to use SMART (another mobile network in Cambodia) for this iPad the network name is still in QB and the Line name changed to SMART.
I don't know how to fix it now.
I have tried many methods as in restore through iTunes, reset network setting, reset all setting... but I still could not get the solutions.
I do hope to get it fix through all your experience.
Regards,
Panharith

Hi Anikesh
using SU01..u can change the password but can't see the old password..
Hope this helps, reward with points if it does...;-)
Regards,
Tejas

Can time machine back up on a wireless network

I would like to find a way to back up my Mac other than on an external drive. Besdides Time Capsule, can Time Machine back up onto other wireless networks? Also, is there a preferred, Mac-friendly online backup available (that may or may not use Time Machine)? I was considering using Carbonite.

Time Machine can backup to any device that has Time Machine Extensions.. eg some NAS have this.. or another Mac. Maybe some routers with USB drives.. I have heard of Netgear Mac compatible models.. but never forget.. apple change things around with every OS release and these companies will always be playing catchup.
You may also find it not easy at all to setup Time Machine.. I use a Zyxel NAS single disk model that does support Time Machine.. it has been fine.. but the setup is far more complicated than any TC.
Very few other devices will have TM available .. but if you use a third party software, then they will generally backup to any shared partition or drive in the network.
Buy a second hand TC and modify the power supply.. put in a big hard disk.. you can simply plug it into the existing network.. you will find it hard to get anything cheaper that works as well.. and none that will be as easy to setup.
Fine if you give up on TM.. then whatever external drive the software uses.. no issues.. but TM is designed to only work on HFS+ partition.

HT201250 I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

I run time machine on my iMac using an external hard drive. I just bought a MacBook Pro and want to know if i can run time machine on it using my wireless network on to the iMac external hard drive

How do I set up Time Machine to a shared drive on another Mac?

How to change data source name and context root during deployment

Hi,
Env:
WLS 10.1.3
JDev 11.1.1.6
Hudson
I need to deploy two instances of my ADF application on the same development enviroment. We are using Hudson to deploy. My question is how to change data source name and application context root before second deployment.
Kuba

I don't believe there is an inbuilt facility to do this.
Previously how I've done this is when checking files out using Hudson jovs, before the build I then use an Ant extension called XmlTask (http://www.oopsconsultancy.com/software/xmltask/) to modify the required XML files.
Can I ask why you're doing this in the first place please? Multi-tenancy? 2 versions of the same app?
CM.

How to change computer network name?

We're swapping 2 computers in our office. How would I change their network names to represent their new user/location? As well as changing the computer's user account?
The way our current setup is that each room has a name, and the room name is the computer network name as well as the user account name.

you mean the computer name is like "iMac-24inch-at-room-1.local" when you browse the networks ?
If so, Just change it in System Preferences->Sharing.
or the wireless SSID, eg. Airport connected to "Room 1" ?
if this is the case, just select the new room BS and set that in Airport Pref network.

Changing Wireless network name on Photosmart 5520

I cannot print documents from my network and I think it it because of network confusion. The test page prints fine so I know I have connection to the printer. I have two wireless networks in my home and the printer display shows network#2. I want it to use network #1. How do I change the network name on my printer display panel?

Hi,
Please follow steps in document below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03250793&tmp_task=solveCategory&cc=us&dlc=en&lc...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Arris CM820 - Change Wireless Network Name for Arris CM820

Hi-How do I change the wireless network name for Arris CM820? The support page lists many other kinds of modems but not this one. Thanks. Hardware: Mac OSX 10.9.95

The AirPort Express is exactly what you need, but when you attach it to a cable modem, you need to power cycle the modem to pickup the MAC address of the new device.
I suggest you do a full reset of the AirPort by pressing the reset button on it for over 30 seconds, power down the modem, connect the modem to the AirPort, then power up everything, then use the AirPort utility to configure the AirPort and your wi-fi settings from scratch. If everything's good, then the LED on the AirPort will be green and you will have connectivity.
One warning, if you have 105 service from Comcast, the Express will limit your speeds to 90 or so as it has a 10/100 WAN / LAN ports. For 105 speeds and higher you would need a AirPort Extreme.

Time machine won't find my wireless network for backup

Time machine won't connect to my external hard drive. It still exists in timemachine set up, but airport utility can't find it - says it doesn't exist. The option to set up airport utility manually is greyed out and not available. The problem happened when i changed my wireless router. The hard drive is a WD MyBookLive and the router is a Belkin. I'd really appreciate your help - this is driving me nuts! :-)

Well, the set up is this:
Motorola modem connects to
Belkin N300 by Cat 5 cable which then connects to
D-Link gigabit switch which connects to
Macbook pro by ethernet cable.
The Belkin also creates the wireless network, which is used by various devices in the house, including the printer.
Error messages I have received are:
From Time Machine (which lists the MyBook as one of its choices, but then can't find it): "
The server "MyBookLive.local" may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
From the MyBook (which was previously working fine):
Hoping this may assist!
Many thanks,
Bruce

How to change the OS name and pass of database server.

Hi,
I have a problem with OEM of oracle10g is not running after changing the OS's (windowsXP and Linux 4.5 ) Name and IP-Address, What should I do? OR
Can anyone give me the metalink document ID to resolve my problem?
My Database Version is below:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
CORE 10.2.0.4.0 Production
TNS for 32-bit Windows: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Thanks,
Faziarain

[email protected] wrote:
But, How to re-create it?Use the following commands. 1st would drop the repository, 2nd would create it.
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos createPlease note that these commands must run from the terminal/command prompt and not from the sql prompt.
HTH
Aman....

Setup for extending Sky wireless network using Airport Express or Time Cap

Hi,
Hi,
I have three Mac computers/laptops (iMac, MacBook Air and G4 PowerBook), all currently functioning via airport on a sky wireless network (Sky HD Sagem router) all backing up wirelessly to a Time Capsule 1TB which is also connected to the same wireless Sky network. At the top of my house signal strength is weak as you would expect. I would like to be able to extend the range of the sky routers signal which is on the ground floor (3 storey house). My original idea had been to setup a AirPort Express on the 2nd floor to extend the network, but I am unsure what steps I have to follow and whether I need to create a WDS network or not? I've seen some comments that say Sky & Apple hardware are not compatible and it's not possible to extend a Sky router/wireless network using a Apple Airport Express or Time Capsule. Can someone provide me with a step by step set of instructions on what I need to do to set this up? If a work around is required, again any advice would be very much appreciated!
Many thanks,
Eugene

Welcome to the discussions!
Sky and Apple products are not compatible for the purpose of extending your network using wireless only.
If you could connect an ethernet cable from your Sky router to the AirPort Express, or if it's not possible to run an ethernet cable...take a look at a pair of ethernet powerline adapters to accomplish the same task by using the AC wiring in your home to transmit the ethernet signal.
If you configure the AirPort Express to "create a wireless network", this would in effect, extend your network by adding an AirPort Express that would be configured with the exactly the same wireless network name, security settings and password as your Sky router. The AirPort Express would also need to be configured as a "bridge".
Post back if you need more details about something like this.

MFP 1217nfw How to Change Network Name and Password When You Buy a New Routers

I have an MFP 1217nfw. It was working fine wirelessly. Then my router stopped working properly. I bought a new router and easily set up my computers, iPad and iPhones to work with it. But I don't know how to change the printer set up so that it will see and connect to the new router (i.e., change the network name and password that the printer uses to connect). Anyone know how to do this without having to uninstall and reinstall the printer as if it were fresh out of the box? Thanks for your help.
This question was solved.
View Solution.

Replacing your wireless router try here.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Airport Time Capsule cannot see my existing wireless network

Just bought iMac and an ATC, and have the iMac connected to my wireless network (Linksys WRT1900AC, 802.11ac) and trying to get the ATC to see it and extend it. The ATC light is blinking amber and while I can see it in the airport utility, when I try to get it to join my wireless network--it doesn't see it, only sees one (my iMac sees 6) and it's my neighbor's (who has a Mac, not sure if Apple wireless)
What to do?
Thanks!

The Time Capsule cannot wirelessly "extend" the signal from the Linksys wireless router.
Instead, the Time Capsule needs to connect to the Linksys router using a permanent, wired Ethernet cable connection.
If you want the Time Capsule to provide additional wireless coverage, it can do so. Simply use the same wireless network name and password as the Linksys network.
Here, I am assuming that the Time Capsule will be located a few rooms away from the Linksys router....and not in close proximity to the Linksys router.

Using exisiting wireless network SSID name and settings

I want to use an existing wireless network SSID and settings as i setup my new airport time capsule. I plan to turn off the wireless network at the Westell modem/router that now establsihes the network. what setting do i pick in airport utility? : extend a wirless network or steup a new wireless network?
When should i turn off the wirelss at the Westell router? Before or after running airport utility?

Establish a permanent Ethernet cable connection from one of the LAN <-> ports on the Westell router to the WAN "O" port on the Time Capsule.
Configure the Time Capsule to "create a wireless network" using the same settings for the Time Capsule network as the Westell.
Make sure that the Time Capsule has been configured to operate in Bridge Mode to work correctly with the Westell router.
Once you have the Time Capsule set up and working, you can turn off the wireless function on the Westell router.

I changed my Airport Extreme network name and password, now I can't access my Airport Express speakers. Help please.

I changed the network name and password associated with my Airport Extreme and now my system is not recognizing my Airport Express speakers.
Can someone help me get my speakers and sound system back online?
Thanks in advance for any assistance.

You will need to think in reverse here.
Change the network name and password back to where it was on the AirPort Extreme and get things working that way.
Then, change the name and password on one AirPort Express, then the second. Both Expresses will be blinking amber at this time. Power them off.
Now, change the name and password on the AirPort Extreme.
Power up both Expresses and they will now join the AirPort Extreme network correctly since you have programmed them with the new network name and password.

Time machine setup - how to change 'wireless network name' and settings?

Similar Messages

Maybe you are looking for