Time Machine Setup using Raid Enclosure

I want to use Time Machine to backup my entire system (approx 6TB) including a very large Itunes Library, movies and photo's/video's. I purchased a sans 8TB raid enclosure and intend to run it in SPAN mode. At this juncture I am using a fire wire 800 connection pending installing a RAID controller card. The configuration is running on a MacPro (2007 Model)and 10.6.4 OS.
Which format should I use: Mac OS Extended (Journaled) or Mac OS Extended?
Will the RAID Controller Card perform better than the Fire Wire 800?
Thanks, Koyangie

Use Mac OS Extended (Journaled.) Yes, it will run faster from a RAID card than Firewire.

Similar Messages

I would like to connect an external hard drive to my time machine and use it as a network drive to store itunes and iPhoto how do i do this

I have just purchased a new my book hard drive and would like to connect it to my time capsule and store my itunes and iphoto contentent there to free up space on my internal hard drive . Can this be done and what is the process?

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

I have an IMAC and I'm running OSX 10.9.2. I'd like to store my Aperture /IMovie Libraries to an external hard drive. In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the externa

I have an IMAC and I'm running OSX 10.9.2. I'd like to store my Aperture /IMovie Libraries on an external hard drive. In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives. Is this possible? Can I set up a RAID 5 format for redundancy?

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

Any way to force Time Machine to use existing backup after inheriting?

Hi,
The hard drive in my iMac failed last week, and a replacement drive as well as a new logic board were installed. I installed OS X onto the new drive and then used Setup Assistant to recover all data from my Time Machine backup. Of course, once everything was back in place, Time Machine wouldn't recognize the backup as its own (per Pondini's site, this is because the logic board replacement makes Time Machine think it's a whole new computer).
To resolve this, I issued the Terminal command to inherit a backup, but this wasn't enough so I also issued the command to associate a backup with the computer. This seemed to work, and I was able to kick off a new backup. Time Machine did a complete scan and determined that it needed to back up everything on the computer as new. Because there's not enough space on the Time Capsule, it then started deleting old backups, one after another, until I noticed what was going on and stopped it after a couple hours.
So my question is this: is there a way to get Time Machine to use the old backup data to do an incremental backup? I'm not sure why it thinks it has to save everything; I could see it saving a copy of the OS, since that was installed from scratch, but all the user account data has been restored from backup so it should match what's in Time Machine. If there's no way to do this then I guess I'll just delete the Time Machine archive and start over, but for versioning purposes it would be nice to have the old Time Machine archive data.
Thanks!
Here's some log data:
10/12/13 8:25:12.755 PM com.apple.backupd[19003]: Starting manual backup
10/12/13 8:25:12.841 PM com.apple.backupd[19003]: Attempting to mount network destination URL: afp://[email protected]/TimeMachine
10/12/13 8:25:14.645 PM com.apple.backupd[19003]: Mounted network destination at mount point: /Volumes/TimeMachine using URL: afp://[email protected]/TimeMachine
10/12/13 8:25:14.687 PM fseventsd[48]: disk logger: failed to open output file /Volumes/Time Machine Backups/.fseventsd/fc007524359f8bb3 (No such file or directory). mount point /Volumes/Time Machine Backups/.fseventsd
10/12/13 8:25:14.687 PM fseventsd[48]: disk logger: failed to open output file /Volumes/Time Machine Backups/.fseventsd/fc007524359f8bb3 (No such file or directory). mount point /Volumes/Time Machine Backups/.fseventsd
10/12/13 8:25:40.251 PM com.apple.backupd[19003]: Disk image /Volumes/TimeMachine/iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
10/12/13 8:25:40.253 PM com.apple.backupd[19003]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
10/12/13 8:25:41.831 PM com.apple.backupd[19003]: Inheritance scan required for /, associated with previous UUID: 30DCBA86-7702-31FD-B8A5-0CFBCE325E36
10/12/13 8:25:41.923 PM com.apple.backupd[19003]: Event store UUIDs don't match for volume: Macintosh HD
10/12/13 8:25:41.966 PM com.apple.backupd[19003]: Deep event scan at path:/ reason:must scan subdirs|new event db|
10/12/13 8:25:41.966 PM com.apple.backupd[19003]: First backup after disk inheritance for / - complete scan required
10/12/13 8:41:23.297 PM com.apple.backupd[19003]: Finished scan
10/12/13 8:49:06.137 PM com.apple.backupd[19003]: Found 1059692 files (565.28 GB) needing backup
10/12/13 8:49:07.658 PM com.apple.backupd[19003]: 679.85 GB required (including padding), 143.39 GB available
10/12/13 8:49:15.324 PM com.apple.backupd[19003]: Ejected Time Machine disk image: /Volumes/TimeMachine/iMac.sparsebundle
10/12/13 8:49:15.324 PM com.apple.backupd[19003]: Compacting backup disk image to recover free space
10/12/13 8:49:57.436 PM com.apple.backupd[19003]: Completed backup disk image compaction
10/12/13 8:49:57.437 PM com.apple.backupd[19003]: Starting manual backup
10/12/13 8:49:57.888 PM com.apple.backupd[19003]: Network destination already mounted at: /Volumes/TimeMachine
10/12/13 8:50:23.419 PM com.apple.backupd[19003]: Disk image /Volumes/TimeMachine/iMac.sparsebundle mounted at: /Volumes/Time Machine Backups
10/12/13 8:50:23.421 PM com.apple.backupd[19003]: Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
10/12/13 8:50:24.966 PM com.apple.backupd[19003]: Inheritance scan required for /, associated with previous UUID: 30DCBA86-7702-31FD-B8A5-0CFBCE325E36
10/12/13 8:50:25.022 PM com.apple.backupd[19003]: Event store UUIDs don't match for volume: Macintosh HD
10/12/13 8:50:25.069 PM com.apple.backupd[19003]: Deep event scan at path:/ reason:must scan subdirs|new event db|
10/12/13 8:50:25.070 PM com.apple.backupd[19003]: First backup after disk inheritance for / - complete scan required
10/12/13 9:06:03.024 PM com.apple.backupd[19003]: Finished scan
10/12/13 9:14:04.765 PM com.apple.backupd[19003]: Found 1059692 files (565.28 GB) needing backup
10/12/13 9:14:06.234 PM com.apple.backupd[19003]: 679.85 GB required (including padding), 143.39 GB available
10/12/13 9:14:06.318 PM com.apple.backupd[19003]: Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/iMac/2013-10-12-202541.inProgress/DB2AD703-283F-42A2-8 97D-194AE5F2F23B containing 4 KB; 143.39 GB now available, 679.85 GB required
10/12/13 9:16:59.047 PM com.apple.backupd[19003]: Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/iMac/2013-09-05-000218 containing 877 MB; 144.26 GB now available, 679.85 GB required
10/12/13 9:24:37.780 PM com.apple.backupd[19003]: Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/iMac/2013-09-04-002732 containing 1.33 GB; 145.6 GB now available, 679.85 GB required

Thanks Linc.
What happened is I needed to retrieve something from Time Machine prior to starting a backup (the first backup after restoring everything). However, Time Machine wouldn't connect to the Time Capsule, so that is why I used the tmutil commands. Probably if I had instead started a backup then it would have asked me if I wanted to inherit.
Well, if there's no way to avoid a full copy then I guess I'll delete the archive and start over.
Thanks again for your help.

No "OPTIONS" box in Time Machine setup window

just finished setting uo a Time Capsule as a WDS remote, for the time with a PB on its wired ethernet. added an external USB disk to the TC for trial.
TC and external disk show up correctly on PB and networked machines. external disk ca be used to stream video over the wired ethernet. too slow over 11g
slide the switch, confirm the TC drive as a backup disk, enter yr password, then after a few minutes "error - no backup volume has been selected, open system preferences" (thats where i came from)
interesting is that the "options" button has now disappeared from the Time Machine setup menu, and the slider doesn't go back anymore.
can somebody gimme some guidance pls? thks.

Apple has never fully committed support of the Time Machine/Airport Extreme combination. I have a Airport Extreme 6th gen that supposedly supports the Time Machine, (page 13 of the installation manual). After a year of experience I have concluded that it does not work - period. If you have any critical data on your system(s) I would recommend that you use a dedicated backup/recovery product like Carbon Copy Cloner.

Time Machine Setup Questions

Hey all, I am looking to upgrade my Time Machine setup and was looking for some tips. Here's my current setup:
I had two (now three - see below) external drives: a 320GB WD drive that currently houses all of my family's iTunes, iPhoto, and iMovie data as well as a few extraneous videos. We also have a second 1TB WD drive that currently has time machine backups from the iMac on it. Time Machine is also set up to back up the 320GB WD to the 1TB drive in addition to the iMac. Both drives are connected to our family iMac (Mid 2007).
The problem is that our 320GB WD that has all of our data is full. So, we bought a new 3TB (!!) Seagate USB3 drive. I am planning to have this drive be a backup drive for the iMac, our media (more on that in a moment), and two other computers (our 13-inch rMBP and my home-built mac (if you know what I mean)). This site suggested that I create partitions for each Mac that I back up. So I formatted the drive with three partitions: 2TB for the iMac and the media drive connected to it, 300GB for my MacBoook, and 700GB for the third Mac. BTW, I am planning to switch to using the 1TB WD drive that I currently use for backups as the new media drive, and retiring the 320GB WD.
I tried carrying the plan through, but I came across a few issues. First, I would like to keep the 930GB of backups that I currently have on the 1TB and move them to a new 2TB partition on my new 3TB drive. First, Finder refused to copy the backups.backupdb folder entirely, but I fixed this by reformatting the Seagate as a case-sensitive volume. Then, when I tried to do the copy it first just had the stripey progress bar for an hour at least saying "preparing to copy x number of items" and that number gradually went up. I left the computer running with Caffeine overnight, but it got stuck somewhere in the copy and I couldn't kickstart it again. Should I just abandon my old backups? 930GB is a lot of data to copy, but I don't see why it would get hung up somewhere. Maybe that was a sign that I should just start fresh with this new drive. Speaking of which, if I do start afresh, how can I get Time Machine to not format my drive as case sensitive? I've never used case sensitivity before (except when TM automatically formatted my last drive as such) and don't want it on my backups. Lastly, I still have the daunting task of copying all my data from the 320GB drive to the 1TB one. Should I just select all and copy, or should I use a tool like Carbon Copy Cloner? Additionally, would hooking both drives up to my rMBP speed up the copy? I'm just copying from USB2 to USB2. Does this sound like a good plan?
Thanks so much in advance for any answers,
Seamus

You propose to partition the 3GB this way ...
1 - iMac TM + media --> 2TB partition
2 - MB TM --> 300GB partition
3 - other Mac TM --> 700GB partition
That seems to abandon the use of any of the existing HDs. Why not do a partitioning this way?
3TB HD
1 - iMac TM --> 2TB partition (by itself rather than shared with media)
2 - other Mac TM --> 1TB partition (rather than a 700GB partition)
A - MB TM --> 320GB HD (rather than in a 300GB partition)
B - media backup --> 1TB HD (rather than in co-storage on a 2TB partition)
As to abandoning old TM backups ... To what extent do you believe that any of the prior backup files will be required in the future? To what extent can you pull those files separately from the TM backup and then archive them separately? IOW, to what extent can you look at your existing TM backup and say ... uh ... this is just old stuff that I will never need to (or have time to) see again or ... OH! ... this old file needs to be kept for the rest of eternity?
Unfortunately, I cannot speak for the process of copying an existing TM backup to a new drive, let alone partitioning with/without case sensitivity.
JJW

Time Machine Setup "Choose Backup Disk" Won't Recognize ANY Disks

I'm trying to configure Time Machine for the first time. I open Time Machine preferences and slide the slider to ON. Because no backup disk is selected, a window pops up where possible drives are to be listed. The Time Machine instructions say this...
Choose Apple menu > System Preferences, and then click Time Machine.
Open Time Machine preferences
Slide the switch to On if Time Machine is off.
Click Choose Backup Disk (or click Change Disk if you have already set up Time Machine).
Step 4 - Choose a disk where backups will be stored, and click “Use for Backup.”
You see a list of every available disk that can be used to store backups, including internal hard disks (except for your startup disk), most external disks, and any Time Capsule devices set up for use with Time Machine. If you have partitioned a disk, the partitions are listed.
I do not see a list of any available disks, not even the internal hard disk on my computer. I only have two button options--Setup Time Capsule or Cancel.
When I click Setup Time Capsule it opens my Airport Utility and takes me to the setup page for my Airport Extreme. Why? My Airport Extreme Base Station is already setup and running. How do I get drives to appear in the Time Machine setup window?

My two external drives are connected to my Airport Extreme Base Station via USB. My tower is connected to the Base Station via Ethernet. My internal drive is, of course, internal and is supposed to show and it's not. Here's their formats...
Internal Drive - Mac OS Extended (Journaled)
My two external drives don't seem to show up in Disk Utility. In Finder the format shows as...
External Drive 1 - SMB (FAT)
External Drive 2 - Has two partitions (rather, 1 partition and two volumes) both of which are listed as Apple Share.
I just re-read your note. I connected External Drive 1 directly to the tower and Time Machine spoke right up and asked if I wanted to use the drive for backing up. The format then appeared in Disk Utility as MS-DOS (FAT32).
- It would appear the drive must be directly connected to the tower to be used by Time Machine. Is this true?
- Why does my internal drive not appear as the Apple Help file says it should?
- I may have to purchase another external hard drive. If so, is there a particular format it should be in for use with Time Machine?
Thanks...

Copy Time machine backup using a different Mac

A friend has a Time Machine backup from an iMac that he sold some time ago. He's concerned that the drive might fail so wants to make a copy of the backup, but doesn't have a Mac at the moment. So he'd like to use my MacBook to copy his backup drive. The backup is about 400GB, my HD is 256GB and he'd like to copy it to a new 1TB drive.
All the answers that I can find to similar questions assume that the Time Machine backup belongs to the Mac making the copy, in this case it doesn't. So is there a way to copy a Time Machine backup using a Mac that wasn't used to create the backup?

Hi ozRob,
If you would like to copy an existing Time Machine backup from one drive to another, you may find the following article helpful:
Time Machine: How to transfer backups from the current backup drive to a new backup drive
http://support.apple.com/kb/ht5096
Regards,
- Brenden

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

Thanks. I will try going through TM. Since my Simpletech is on the way out, I'll be plugging in a new external hard drive (other than the back-up drive) and trying to restore the library to the new drive. Any advice or warning if this is NOT the right thing to do?
Meanwhile, that is a great tip to do an alternate back-up using a different means. It's been tough to figure out how to "preserve access" to digital images and files for posterity, knowing the hardware will always fail/obsolesce sooner or later, and that "clouds" are only as good as their consistent and reliable accessibility. Upping the odds with redundancy will help dull the edge of my "access anxiety", though logically, it can never relieve it. Will look into
Carbon Copy Cloner.

Can time machine be used to back up one external drive to another external drive?

I use the photography program Lightroom to organize and develop digital photos. All my photos are stored on my iMac internal drive. The internal drive is almost full so I want to move my photos to a new external drive. At present, I have an external drive devoted to backing up my iMac using time machine. I have no need to change this arrangement. I would like to use a new external drive to serve as the primary location for my pictures, which I will move from the internal drive. Then I would like to backup that drive to a third external back up drive. Can time machine be used to automatically back up the second drive to the third drive as well as for continuing to provide ongoing backups to my internal drive as it is currently doing?
Thank you in advance for your assistance.

Jeffery t wrote:
Thanks for the links, but I don't see in the pondini links, the scenario I am asking about.
Time Machine can easily back up multiple internal and/or directly-connected external drives and partitions simultaneously (but Time Machine cannotback up data that's on a network).
From the first link.
Jeffery t wrote:
... Please note that my iMac internal drive is backing up to external drive number 1 using time machine. I want my pictures on external drive two and those backed up to external drive three. So are you saying that if I have 500 GB of pictures on drive number 2, I will need a third drive that is at least 1 TB?
the confusion starts in your above statement...
There should be Only One Time Machine Drive.

Can Time Machine be used to back up iTunes?

I use Time Machine to back up my computer, and recently used it to set up my new computer. But I always exclude iTunes because my current library is at 1.41 TB, running off an external drive. I would like to make a regular back up of our iTunes library, say every week or so. That's why the DVDr route is not appealing, it's not fluid enough. Can Time Machine be used in this way? If I set up another dedicated external, and set it up with TimeMachine, but told it to exclude everything except the iTunes external, and made sure I did this every week, would it work? Thanks.

I'm not sure I understand your question, but there's no reason why you should treat the iTunes library any differently than other data for backup purposes. The first TM snapshot that includes it will take a long time and a lot of space, but once that's done, the files won't change and therefore won't need to be copied again.

I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

There has never been a reliable firewire ---> USB adapter suitable for external high speed storage. This was a major issue when the MacBooks lost the firewire port a number of years ago (Apple subsequently brought it back).
The only high speed port on the Air is the ThunderBolt port. There are external ThunderBolt drive options out there, but they're somewhat more expensive than traditional USB/FireWire options.

How to limit the amount of disk space Time Machine will use?

On Yosemite, how do you limit the amount of disk space Time Machine will use?
I'm using a Seagate Goflex Home 2tb drive connected to my router as a Time Machine backup drive. I use this for three things 1)Time Machine 2) an occasional backup of windows document subdirectory 3) backup of music and photos for long term storage. Doing something like re-partioning the drive is not an option. I'll just go buy another drive for time machine's sole use. In addition, using software from Seagate is not an option. I don't want to use their software for different reasons (mainly the GoFlex home is really designed as a "media server" which I don't use. I, of course, use iTunes. ) On the Mac, I'm only using about 250GB total but time machine is rapidly using up space.
Apparently using a terminal command like below, used to work, but no longer works under Yosemite.
For a limit of 100gb the number below would be 100 x 1024
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize 102400
To remove the limit, use the following command:
sudo defaults delete /Library/Preferences/com.apple.TimeMachine MaxSize
Now, I'm not too familiar with terminal and I'm not about ready to issue a command without knowing exactly what it is going to do.
Is there an easier "switch" someplace or an app that does this?
If I don't limit the size, at some point there will not be any space left for windows backups and additional photo and music files.

Hmm- added "sudo" and there was no error reported:
sudo defaults write /Library/Preferences/com.apple.TimeMachine MaxSize xxxxxx
I guess we'll see.

Can Time Machine be used as a normal router?

Sorry my ignorance on this type of Apple's products.
My question is simple:
Can Time Machine be used as a router? I know it backs up files, but I'm not sure about this function.
Thanks in advance!

Yes, it does function as a "normal router".
In addition to its ability to function as a "normal router" (ie a device to share a cable/DSL internet connection) the Time Capsule will also:
1. function as an a/b/g/n wireless access point
2. network attached storage device, for Time Machine backups as well as general purpose file storage
3. point of attachment of one or more USB printers, which can be shared with all computers on the network
4. point of attachment of an external USB hard drive, for storage space additional to the built in hard drive

HT4710 how to restore/import photos from Time machine while using Lion

how to restore/import photos from Time machine while using Lion

Launch Time Machine, go to the time you want to restore from and select what you want to restore and click restore - once the photos are restored improt to iPhoto - or restore the entire iPhoto librarhy and use it
LN

Time Machine Setup using Raid Enclosure

Similar Messages

Maybe you are looking for