"Time Machine" vs. "Time Capsule"?

Thinking about buying my first apple computer. Just wondering what the difference is between "Time Machine" and "Time Capsule"?

Time Machine is backup software bundled with Mac OS X 10.5 or newer which can back up to an external drive or Time Capsule. The Time Capsule is a wired and wireless router with an internal hard drive.
(60988)

Similar Messages

Time Machine and Time Capsule don't seem to work well together?

Reposted.
I get the feeling there are some serious problems with the combination of Time Machine and Time Capsule.
This is extremely disappointing, as the idea of a centralized backup device on the network (instead of disks attached to each and every computer we have running Leopard) seemed like such a good idea and a good way to supplement our tape-based backup that takes place with Retrospect.
In reality, it's a disaster on both Intel and PowerPC systems. All systems and the Time Capsule are fully up to date with software updates from Apple. I have two 1TB Time Capsule units. It goes something like this:
1. I have a few systems (mainly Intel) that work perfectly with the Time Capsule. There are no complaints and no issues at all. These systems just quietly run their backups as they should. They are the definite minority--maybe one or two have worked properly.
2. I have some systems that complain from time to time (mainly PowerPC) but will back up with a little encouragement. These too are the minority.
3. And finally, I have systems that are nothing but pain. These are both Intel and PowerPC systems. They are also the majority of the systems I have. The most common problem is sudden loss of the credentials needed to access the Time Capsule hardware--a user will be going along about their business when the Mac OS asks for the Time Capsule user name and password--after it's already been supplied and backups have been running. This should simply never ever happen.
Another charming behavior I've seen is corruption of the sparse disk image file that each computer creates on the Time Capsule. Time Machine will complain that it can't perform the backup, and examining the disk image file with Disk Utility shows it to be severely damaged. Turning off Time Machine, deleting the corrupted sparse image file, and starting over fixes it. For a while.
Finally, there are the machines (again, both Intel and PowerPC) that just can't seem to actually get through the first backup run. They either go so far and can't continue, or never actually manage to get started. I've checked the disks in these computers and found no problem with the hardware or file system. The installations are fresh and fully up to date.
Meanwhile, I have computers running Leopard with directly attached disks configured for use with Time Machine. One is a QuickSilver that isn't even officially supported by Leopard, with a Firewire attached disk. It doesn't skip a beat. The other is an Intel Mac mini being used with Mac OS X Server 10.5.4 and a USB external hard drive. These machines just do their thing, and I never have to babysit them.
These problems with the Time Capsule have been so severe that I've just given up on most of the computers and shut off Time Machine entirely. We have tape backups that run over the week, so it's not a huge loss. But that's not what really made me throw up my hands and say "enough"...no, that was the speed. Even with just one computer backing up to it, the Time Capsule seemed terribly slow. Watching the progress indicator was just painful.
I put in a word about all of this to my independent Apple dealer, and they say I'm definitely not the first to complain about some or all of these problems. In fact, they told me they were going to set up a test lab in their shop to see if they could duplicate these findings. I have no doubt that they can.
There are a total of seven computers backing up to one Time Capsule. They all store maybe ~40GB worth of data including the OS. There are about six computers on the other. Because of the way the network is laid out, the Time Capsule is connected to a Gigabit switch (and that is the only thing it's connected to). It cannot be used as the router, although I know Apple suggests this. The Airport section is disabled--I have no need or desire to use it. Some computers link up at 100 megabits, others at 1 gigabit. There are no network problems--we have no problems moving large amounts of data across the same network to our tape backup machine.
Is anyone else seeing these kinds of problems? Am I doing something wrong or expecting too much from Time Capsule?

I may be on to something. The Time Capsules I have live in a telephone equipment room that is indoors but not directly air conditioned or heated. It doesn't ever get too hot to be comfortable in there--the highest I've ever seen the temperature was 80 degrees (F). Most of the time the temperature is between 60-78 degrees.
I happened to touch one of them the other day while it was in use, and I noticed that the casing was hot to the touch...not dangerously so I suppose, but much hotter than I would have expected.
So I turned a small fan on both Time Capsules and have left it running. And I've noticed that not only do backups seem to complete more quickly, the reliability is also better. I am going to try some of my most troublesome computers once again just to see what happens.
I know there is a fan pointed at the hard drive in the Time Capsule, but I can't see how it does much in the way of cooling things down. In my opinion, it's just surrounded by too many heat producing devices to do much good...after all, not only is there a 7200 RPM hard disk in there, but also a 500MHz Marvell processor and radio set.

Time Machine says Time Capsule Disk unavailable

     I have the exclamation point in the menubar icon and Time Machine says Time Capsule Disk unavailable even though I have backed up to it many times before. I tried unpluging/plugging in the TC, but this did not solve the problem. Any ideas?

      However, I did have a problem periodically with computers not recognizing the TC disk before I had unclicked the "Enable file sharing" box, so I might still end up using your advice if this happens in the future.
There is a bug or several of them.. losing the disk is one thing the new 7.6.4 firmware is supposed to fix.. my deeply held suspicion is that Apple are using all of us as beta testers.. as lots of people are having trouble. But who knows it may finally fix this bug.. we are awaiting confirmation. ie people saying it is now fixed.. rather than since loading 7.6.4 my TC is now dead.. or disappeared .. or broken.. or no longer has wireless output.
Lets say maybe they fixed a bug.. and added some more.
     The reason I had unchecked the "Enable file sharing" box is because I have Mountain Lion Server and wanted to use port mapping on the TC to point to my computer as a File Server. To do this I went into Airport Utility and in Network pane tried to add File Sharing to the Port Settings. However, this conflicted with the "Enable file sharing" box from the Disks pane. Do you know of a way to have time machine backups to TC but also run a File Server from a computer networked with the TC using port mapping? Thank you for any guidance.
You only need the ports forwarded to the server to get outside access.. ie remote wan access.. Did you have wan access to the TC checked.. that will cause a conflict with AFP .. since it cannot be forwarded to multiple destinations at once.
If you do not have WAN access checked then you should be able to check "enable file sharing" since that is local lan..
Try it and tell me what happens.. I have never tried the combo you are using.
I would try simply using a different method to access if that doesn't work.. eg BTMM should work fine to the Server without needing ports forwarded in the TC.. as long as the TC is the main router.. and this whole issue is only because the TC is the main router.
You can also do it with vpn.. which is more robust and more business/pro method to access a server remotely than AFP.

Time machine and time capsule

I recently upgraded to Snow Leopard and installed Time Capsule. I connected a Maxtor external drive to Time Capsule to enable me to access my photography library wirelessly. I have a 2nd external drive that direct connects to my Mac Book Pro. I have found the following problems:
1. Time machine shows backup files for the external drive that connects to my mac, however they are old files no longer on the drive. It does not backup the current drive but does indicate backup was successful. I would also like time machine to backup the external drive connected to time capsule.
2. I tried to delete the folder containing the old files and received a message saying I did not have permission.
3. I am experiencing problems entering Time Machine. It takes a long time to connect (including when I am connected via an ethernet cable) and after a few minutes I receive a message asking if I still want to enter time machine. Once I do have access, I typically only see mail and am not able to access folders.
Help is appreciated! Thank you.

rgoodman wrote:
1. Time machine shows backup files for the external drive that connects to my mac, however they are old files no longer on the drive.
Where does it show the old files, on recent backups in the "Star Wars" display?
It does not backup the current drive but does indicate backup was successful.
Are you sure it's not backing-up the new drive? Try the procedure in item #E3 of the Time Machine - Troubleshooting *User Tip.* It's for a slightly-different situation, but should confirm which disks were backed-up on each backup.
If you're sure the new external is not being backed-up, and is not on the +Do not back up+ list, do a "full reset" of Time Machine per item #B3 of the Troubleshooting Tip.
I would also like time machine to backup the external drive connected to time capsule.
Sorry, it won't. TM will only back-up internal or directly-attached FireWire or USB drives.
You might want to review these:
Time Machine Tutorial
Time Machine 101
How to back up and restore your files
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine
and perhaps browse the Frequently Asked Questions *User Tip.*

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt cmd esc. Ideas?

When I enter time machine (on Time Capsule) i see the stack of screen shots and the time line. However, when I roll over the mouse pointer, the time line does not activate. The cancel button does not get me out of the app: have to alt+cmd+esc. Ideas?

I have never seen it but then I run SL which is much more reliable than Lion..
See
http://pondini.org/TM/E4.html
Check the master guru of all TM problems.

Macbook backs up with time machine to time capsule, imac won't

I'm going nuts, and have spent hours trying to fix this. My family moved from PCs to macs a couple of years ago- we've got three Macs having varying success backing up with time capsule. 1. Our macbook backs up with time machine to time capsule- it even backed up today. 2. Recently attempted to back up the imac for the first time- it starts backing up (maybe 3%) but stops and I end up getting an error message-it has never backed up- 3. The macbook pro has backed up many times but recently has not backed up. It gets the same error message as the imac when time machine is used to back up to time capsule. As an added treat, i attempted to backup the imac with time machine to an external hard drive, it began backing up, stopped and I got the same error message: "time machine error unable to complete backup an error occurred while copying files." Little help!

dilagan wrote:
i attempted to backup the imac with time machine to an external hard drive, it began backing up, stopped and I got the same error message: "time machine error unable to complete backup an error occurred while copying files." Little help!
Yes, that message is not some of Apple's best work.
Most likely, there's a damaged/corrupted file that Time Machine is choking on. See #C3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
If you're getting a different message from the Pro, see #C2.

HT3275 Using time machine first time and the estimated time says 25 days. Wow! Am I able to use my Mac when Machine is doing its first backup?

Using time machine first time and the estimated backup time says 25 days. Wow!
Am I able to use my MacBook Pro when Machine is doing its first backup?
I can't be without my computer that long. I would have withdrawal symptoms (very painful).

Something WAS radically wrong, but I don't know what it was. However, using Apple's disk utility, I decided to totally erase the Seagate, which was "pre-formatted" for Mac and PC.
I first saved the Seagate software to my hard drive just in case I needed it later (which I don't),
By the way, the first time I tried Time Machine it stalled after about 3 GB. The second time I got the message saying 25 days backup time. I stopped that backup after receiving your response.
After reformatting (extended - journaled) I made my third attempt. Success!!! It took about 8 hours, but went through without a hitch..
I bought the SeagateI because a momentary power failure messed up my 1 TB LaCie external, which was divided into 2 partitions. The power glitch completely fouled one partiton and it will not reformat no matter what I try. I did not do a full reformat because I did not want to lose the backup on the good partition. Now that I have a good backup I plan to do a full 1 TB reformat (without partitions) on the LaCie.
Thank you for your response, which really did help me.

Time Machine and Time Capsule - Failing with Network Problem

My problems with TM/TC have been ongoing for a couple of months now and I am going round in circles - need help.
This is the second post I have made, the first got lost in people suggesting the obvious - so I will try to be a little more specific if I can.
I will detail the current state first - i.e. where I am now - after I will list what I have done so far to get to this point.
Currently, my iMac (intel) is directly connected by Ethernet 1GB to the Time Capsule. The TC is then connected to a Netgear router which in turn is connected to Internet.
I have no network problems at all - internet connection is fine. the Netgear Router has the latest firmware version and is working fine. The porblems i have are nothing to do with this.
The time Capsule is in Bridge mode and getting a reserved dhcp IP address from the Netgear router.
The Time Capsule has been fully reset - i.e. power cable out, hold the reset button, plug in power cable (spark, spark), hold reset button, fast blink for 20 seconds or so, light goes out, release button.
I have re-applied the latest Time Capsule firmware.
I have renamed the disk on the Time Capsule.
I have renamed my iMac and deleted all the time capsule entries from Keychain.
I have re-installed Mac OSX and re-updated to the latest 10.5.6 release.
At the moment I have kicked off a backup with a lot of large files - like music folder, video folder etc excluded. I also have parallels and have excluded the disk image. I have 1 other 50GB disk image which is also excluded.
I am expecting the first initial backup will complete successfully.
I will then remove music and video from exclusions and allow them to backup. I am expecting this will complete no problem. (I do this because the upcoming problem will happen if I move away from the machine - and I dont want to sit there for 2 days).
So up to this point TM and TC have performed flawlessly. The issue that follows started happening before the 10.5.6 update after backing up with no issues for months. At this point I will be able to use TM to browse the backup and restore files. I will be able to mount the sparse bundle and browse files. Spotlight reports no issues and indexes quickly.
If I leave my machine after a successful backup and the hourly update kicks in it will fail with 'A Network problem' basically saying the backup has filed because of a network problem, but is not any more specific, logs show far too much to put the whole thing here, but the following is an excerpt
Dec 23 05:19:49 MickMac /System/Library/CoreServices/backupd[1499]: Backup destination mounted at path: /Volumes/Backup
Dec 23 05:19:50 MickMac hdiejectd[1519]: running
Dec 23 05:19:51 MickMac kernel[0]: jnl: disk1s2: replay_journal: from: 28864512 to: 30084096 (joffset 0x1d0f000)
Dec 23 05:21:49 MickMac kernel[0]: jnl: disk1s2: journal replay done.
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Disk image /Volumes/Backup/MickMac_001ec215ce76.sparsebundle mounted at: /Volumes/Backup of MickMac
Dec 23 05:21:49 MickMac /System/Library/CoreServices/backupd[1499]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 05:21:49 MickMac com.apple.launchd[1] (com.apple.netauth.sysagent[1500]): Stray process with PGID equal to this dead job: PID 1503 PPID 1 check_afp
Dec 23 05:21:55 MickMac fseventsd[38]: event logs in /Volumes/Backup of MickMac/.fseventsd out of sync with volume. destroying old logs. (3627 125 5482)
Dec 23 05:27:33 MickMac /usr/sbin/ocspd[1539]: starting
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 5 reqID 5400 flags 0x9 afpCmd 34 so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x7e78cc0
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 05:30:27 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot -1 error 89 reqID 1 flags 0x9 afpCmd 0 so 0x7e78cc0
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 05:31:26 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d00000a', dead
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Open Session failed 57 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: max reconnect time reached 60 > 30 /Volumes/Backup
Dec 23 05:31:26 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: posting to KEAType IO] [ErrNo 5] [IOType Read] [PBlkNum 1248] [LBlkNum 155] [FSLogMsgID 501572642] [FSLogMsgOrder First]
Dec 23 05:31:26 MickMac kernel[0]:
Dec 23 05:31:26 MickMac fseventsd[38]: failed to unlink old log file /Volumes/Backup of MickMac/.fseventsd/0000000000ccb02b (Input/output error)
Dec 23 05:31:26 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED)."
It goes on and on and is repeated every hour. For each one I get an error message on screen saying backup failed due to a network error. However I have tried a manual download over the same period set at an extremely slow rate so that it was downloading during this time and it showed no errors. I.e. the network connection from imac, through TC to netgear and out to internet - and monitored this while time machine showed these errors (i.e. at the same time) and this showed no connection problems at all and completed succesfully.
I know TM uses an internal address to do backups, but uses the same cable and network card to get the job done. I am simply removing the cable as a source of issue although I have also replaced this making no difference.
Applecare are involved and have so far been sent 2 sets of logs and so far have not been able to find the cause. New TC is on its way to try that, although they think it is something on the imac that is causing this.
Sleep mode is turned off although screen sleep is on. The tick is not in the box for putting hard drives to sleep whenever possible.
Now, after this has happened, and back at the machine. I restart both imac and TC. Try running a backup, spotlight starts to re-index - i.e. will mount the backup volume and start the index process, gets to about 90% then fails - again excerpts from log
"Dec 23 09:18:50 MickMac /System/Library/CoreServices/backupd[161]: Backing up to: /Volumes/Backup of MickMac/Backups.backupdb
Dec 23 09:18:50 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexCI in ContentIndexOpenBulk:Unclean shutdown of /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/li ve.0.; needs recovery
Dec 23 09:18:57 MickMac com.apple.launchd[67] (com.apple.netauth.useragent[147]): Stray process with PGID equal to this dead job: PID 152 PPID 1 check_afp
Dec 23 09:19:48 MickMac mds[32]: (Error) Server: machmsgdispatch: (ipc/send) invalid destination port [msgh_id 14016]
Dec 23 09:29:35 MickMac /usr/sbin/ocspd[197]: starting
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 11 reqID 3204 flags 0x9 afpCmd 60 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP HoldPendingReqs: holding slot 12 reqID 3205 flags 0x9 afpCmd 34 so 0x8051b28
Dec 23 09:42:48 MickMac kernel[0]: ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect started /Volumes/Backup prevTrigger 0 currTrigger 1
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: doing reconnect on /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: soft mounted and hidden volume so do not notify KEA for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: connect to the server /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Logging in with uam 10 /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: AFP_VFS afpfs_DoReconnect: Restoring session /Volumes/Backup
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 11 error 35 reqID 3204 flags 0x19 afpCmd 60 so 0x8051b28
Dec 23 09:42:49 MickMac kernel[0]: ASP_TCP CancelOneRequest: cancelling slot 12 error 35 reqID 3205 flags 0x19 afpCmd 34 so 0x8051b28"
And later....
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 received VQ_DEAD event (32)
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: hfs_clonefile: cluster_read failed - 5
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 type 'afpfs', mounted on '/Volumes/Backup', from 'afp_0V1fqC1mgalO00mE1H0Pyetl-1.2d000005', dead
Dec 23 09:45:49 MickMac kernel[0]: HFS resolvelink: can't find iNode791959
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x39 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]: ore-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431/store.db] [FSLogMsgID 1580919258] [FSLogMsgOrder Last]
Dec 23 09:45:49 MickMac KernelEventAgent[34]: tid 00000000 found 1 filesystem(s) with problem(s)
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: dojnlio: strategy err 0x5
Dec 23 09:45:49 MickMac kernel[0]: jnl: disk1s2: end_transaction: only wrote 0 of 49664 bytes to the journal!
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexSDB in dbcheckdatastore:store.db : dbgetdatastore: ERR: could not read 4096 bytes
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoSync:write err: 5
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431)(E rror) IndexCI in CIMetaInfoCreate:Tried to create index when index already existed /Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/6CC2B046-5E28-4179-96B7-9DFF9F7EE431
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in adddirtychunk:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : ERR: Can't write DST header (Input/output error)
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac kernel[0]: disk1s2: 0x14 (UNDEFINED).
Dec 23 09:45:49 MickMac kernel[0]:
Dec 23 09:45:49: --- last message repeated 1 time ---
Dec 23 09:45:49 MickMac mds[32]: (/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE)(E rror) IndexSDB in dbflushdatastore:/Volumes/Backup of MickMac/.Spotlight-V100/Store-V1/Stores/266E0E5F-E002-4EB5-A049-9B50582510FE/st ore.db : dbsyncdatastore: write-errors flushing cache/writing map.
Am I the only one having these problems? any help from anybody please...

Got the same problem with a 3 months old TC.
The replacement TC, does it work now flawless?

How do I set up multiple computers to use time machine on time capsule

I have tried to set my other macs on time capsule using time machine as the backup device. All I get is the error message "there is a problem connecting ot the server.... Check the server name and ip address. This is supposed to be easy, so how do I set the other computers up?

Whether or not this is possible will depend on the type of modem that you are using with the Time Capsule.
If you have a simple modem (with only one Ethernet port), you can likely set up the Guest Network feature. If you have a modem/router (it will have multiple Ethernet ports), unfortunately, it is not possible to set up the Guest feature and have the Time Capsule operate correctly.
Can you provide the make and model number of the device that you call your "modem"?

Trying to backup two computers via Time Machine on Time Capsule

Hi, everyone.
I have read about a similar problem that I am having, but the forums were all from 2009, so I don't know if anything has been updated or figured out since then.
I bought a Time Capsule yesterday, and I set-up a network as well as the Time Machine configurations. My iMac running 10.6.8 did just fine backing up; however, my Macbook running 10.5.8 did not.
When I try and run a backup with Time Machine, I get this error:
"The network backup volume could not be mounted because there was a problem with the network username or password."
After that error, I get this error:
"Keychain error -25299 occured while creating a System Keychain entry for the username "XXX" and URL "afp://[email protected]//XX".
I have searched different forums for hours, and so far, based on what I have been reading, I have done this:
1. Deleted anything having to do with the TC in the keychain and trying to restart the backup. This made me have the same errors again.
2. Reset the PRAM.
3. Repaired disk permissions.
4. Repaired keychain permissions.
Finally, I found on a forum that I could set up guest access on the network and backup my Macbook as a guest. This is what I am doing, now. However, I saw that starting with OS X 10.6, there was some kind of update for Time Capsule and Time Machine in regards to using Time Capsule for multiple computers.
My question is, since 2009, has there been a fix for this? I know some people suggested updating firmware, and if this is the fix, what do I need and where do I get it? Also, would it be possible to purchase OS X 10.6.8 for my Macbook and update it to potentially solve the problem? Is updating the Operating System hard? I'm not completely computer illiterate, but I am not great, either. If I update the Operating System, will all of my files and applications remain on my Macbook?
Thanks in advance for any help you can provide!

Well, there is a way to reinstall without erasing the drive. But it may not fix the problem. You may need to start from scratch. In any event you should make a backup of your system then you do not risk losing anything but some time.
But the real problem I see is that it is the computer that is the problem not the TC which seems to work fine with your iMac.
Since you are using Leopard you can do the following. In my opinion I would not opt to preserve user accounts and network preferences since your problem may well be in your user account.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Time Machine to Time Capsule locking my Macbook - help?

I'm close to returning my new 1tb Time Capsule and buying a cheap router. Much frustration
My network consists of 3 Macs - 1 G5 iMac and 2 first gen Macbooks (10.6). One Timecapsule, with an Airport Express as an extender. A few other devices (couple of Tivo's, couple of iPhones, printer etc) too. They all work flawlessly.
The iMac has no Time Machine (10.4) - Wireless backups using "Backup" take forever, but do eventually work.
The Macbooks do - one is a lesser used machine with only 50gb or so on the drive - we did the first backup via ethernet and the rest is fine, and as expected. It gets affected when the AE drops internet (more below).
My Macbook is a different story - the initial backup is close to 200gb, and seems to lockup even over ethernet (everything freezes, system clock stops at a set time).
I did get one initial backup, but the incremental backups are still incredibly slow - I'm a photographer, so one photo shoot could be 2gb of files to backup over the WAN. It never seems to complete - usually Firefox or iTunes will crash (Not Responding), sometimes my local airport express may fail and drop internet connection (a soft reset from the Airport Util brings it back, assuming my Macbook is still up).
I'm getting very frustrated - my Macbook needs to be wireless, and Time Machine needs to just work. Local drives work fine, I've not had a problem with a local USB drive in the past few years - but I didn't drop $400 on a Time Capsule to keep a local drive just for the most used Macbook.
Everything is 802.11G (core duo Macbooks didn't have 802.11N). All non Mac devices work, even with the AE in a hung state.
If I don't use Time Machine on my machine, or if I do my backups to USB drives, everything on the other machines is fine. Why can't it handle the large backups (even if it's slow)? Why does it crash my local machine, and sometimes the AE?
If I can't get this working, I'll just stick with my local USB drive, exchange the Time Capsule for a regular router and save myself close to $300, and be very unhappy

Time Capsule cannot handle large (100gb_ updates over wifi (G), regardless of time left alone. Have had to buy a second external drive for my Macbook, and pushing everything else over the wire.

Is there a way to recover hard drive data after backing up via Time Machine (from Time Capsule)?

iMac 27", Mid 2011
2.7GHz Intel Core i5
Mac OS X Lion 10.7.5 (11G63b)
Apple Time Capsule (May 2012)
Greetings,
Is there a way to recover the most recent version of your hard drive, after you installed an earlier version. I accidentally restored to an earlier version of my Mac Book lap top and installed it on my iMac desk top. I installed the earlier version using an Apple Time Machine and Apple Time Capsule.
I see some recovery software online, but I'm not sure if I should buy one or if there's another way to approach this problem.
The restored version has some of my files, but it's 2 full years old!
Am I dead in the water?
I appreciate any advice you can offer on alternative recovery techniques or recovery software recommendations.
Sincerely,
Chuck "dying over here" B.

Hey R,
Thanks for the quick reply.
Unfortunately the whole time I thought the TM/TC was backing up correctly as the thing was starting and stopping as if everything was fine. I guess I was blinded by the little green light that was always on. So actually it does not have a recent version of my iMac, - it only lists old 2011 and 2012 versions of my Macbook. I suppose I screwed something up at setup, and as it was hard lined (via a T5 cable) into my iMac, and the Macbook was shut down in a drawer, I never realized the error.
The restored version is less than a Gig, so there's plenty of room left on the iMac (1TB HD). As such, I'm hoping that most of the files have not really been overwritten.
I'm willing to pay to have it professionally recovered, but is that even possible?
C

Can I backup an External Hard Drive using Time Machine and Time Capsule?

I have a Powerbook G4 with Mac OS X 10.5.2 and use an external hard drive *all the time*. I'd like to use Time Machine and my new 500GB Time Capsule to back it up along with the internal hard drive. Can I do this? Thanks for your help.

I believe so; this thread indicates how. Hope this helps.

Time Machine and Time Capsule Problems

I have a Time Capsule and my Time Machine no longer seems to work on my MBA.
It had been working fine for the past 2 months. It would do quick backups (between 1-3 MB normally) after my first long backup.
Now whenever I look at my MBA it will show Time Machine spinning but always says "Preparing Backup." It will stay in this state for days. If I try to stop the backup it will then be stuck in "Stopping Backup." The only way to get out of this is to turn off the computer. Then it will say "Last Backup Failed" and the next time it tries to sync the process will start over again.
In the past I would have some problems if the MBA went to sleep in the middle of a backup where the backup would fail, but it would work the next time it tried to backup. I don't know why it isn't working anymore.
Any advice would be appreciated. Thanks.

See this KB article. It may apply to your situation.
Mac OS X 10.5: Time Machine preferences may display "Preparing" for a longer time
http://support.apple.com/kb/TS1516
One observation it has is that anti-virus software can interfere with the backup process.

Do you have to use Time Machine with Time Capsule? Time Capsule &Fire Wire?

Does Time Capsule have to be used with Time Machine, or can a user use Time Capsule as a straight foward external hard drive for which to copy files?
Can Time Capsule be linked via USB or Firewire for important data transfers to, and from, a MAC computer?
Thank you in advance for any input.

1. your first question is answered by this paragraph Apple has posted at http://www.apple.com/timecapsule/wireless.html which says:
"Time Capsule with Time Machine in Leopard is the ideal backup solution. But that doesn’t mean Tiger, Windows XP, and Windows Vista users can’t enjoy the benefits of Time Capsule, too. Because it mounts as a wireless hard drive, Tiger and Windows users simply access Time Capsule directly from the wireless network for exchanging and storing files quickly and easily."
2. Time Capsule can not be connected directly to a Mac via USB to transfer files. Time Capsule does not have a Firewire port. All file transfer occurs over a network connection between the Mac and this device. If you have a Mac with a gigabit ethernet port, and you cable it directly to one of the ethernet ports on the Time Capsule, the data transfer will be "pretty fast".
Keep in mind that Time Capsule is a network device designed to share an internet connection, create a wireless network, and provide shared file storage and printing on the network. It is not at all similar to a basic external hard drive.

Will Time Machine backup Time Capsule files to an attached usb drive?

Hi Everyone,
I want to put shared media files on my Time Capsule and then have Time Machine backup my imac and all the files on the TC to a usb drive attached to the Capsule. Possible? That way I have a shared media server that is being backup up regularly.
Thanks for the help!

No. Time Machine cannot backup any network attached storage device such as TC. TM can only backup a Mac's internal HDD plus and ATTACHED/LOCAL HDD to the external HDD connect to the TC USB port.

"Time Machine" vs. "Time Capsule"?

Similar Messages

Maybe you are looking for