Time machine - where are my applications?

I'm fairly new to the Mac and I just got a Time Capsule, setup my backup (excluded the 2nd partition of my harddisk, the 2nd partition contains Mountain Lion while the first one has Mavericks) and now I'm not able to find my applications anywhere in time machine.
I tried to follow those instructions: Select Applications in Finder, then enter Time Machine. After it loads  go to the backup you want to restore from.  Select the applications you want to restore.
I see my applications only in TODAY, no matter to what I go back in time, the applications folder is not shown. I did not exclude it from the backup, so why doesn't it show? It's grey on the left side (under favorites) and when I go to Macintosh HD it doesn't show at all.

Thank you for the link Eric. In 15 hours (estimated backup time) I'll know more and let you know.
@etresoft: Sorry, I was not very precise (I'm not a native speaker), I have the TC now for about 3 weeks and there are multimple backups (my computer is running 12-13 hours per day and TC backup is always on).

Similar Messages

  • Time Machine: Where are my documents?

    Why does Time machine not back up my documents. I used for the first time yesterday but the documents don't appear on my backup drive.
    John Newell

    I think I found them. In Time machine > Backups.backupdb > John Newell's iMac > 2012-10-28-124523 > Macintosh HD > Users folder! There are all my documents, downloads, etc.
    Right?

  • How can I tell if my Time Machine backups are encrypted?

    Hi - I would really appreciate it if someone could help me find out if my Time Machine backps are actually encrypted.
    I know that there is an 'encryption' option when choosing a disc for Time Machine to backup to, but the problem is I cannot remember whether or not I actually ticked it (as it was a couple of years ago).
    Other info that might be helpful:
    - The disk I use Time Machine to backup to is actually a Apple Time Capsule
    - I do have FileVault2 enabled on my mac
    - I have never encrypted the Time Capsule disc itself (via Disk Utility or anything similar)
    - One possible clue might be: When I go into Time Machine preferences, and click on 'Select Disk...' (as if to choose another disk to back up to), and select the disc that Time Machine currently backs up to (i.e. the Time Capsule disc), it does show an 'Encrypt backups' checkbox at the bottom of the window... however this checkbox is unchecked and also greyed out.
    Thanks in advance
    a_quinn

    a_quinn wrote:
    - Because I originally created this Time Machine Backup (to the Time Capsule) back in my 'OS X Lion' days,
    I wondered; you posted in the Mountain Lion forum, but your profile still says Lion.
    that means that my backups now (and moving forward) will continue to be un-encrypted
    Correct (as of now, anyway).  You cannot encrypt existing network backups.  I doubt that will be available in the future, and would take forever. 
    - The only way to encyrpt my backups now, moving forward, is to remove this Time Capsule disc (from Time Machine Preferences), and start all over again ensuring that I check the checkbox next to 'Encrypt Backup' when selecting the Time Capsule's disc to backup to.
    Well, in theory it's possible, but would take forever, squared. 
    You could archive the TC's contents to a USB drive connected to it, per #Q6 in Using Time Machine with a Time Capsule). 
    Then delete the original, start a backup with encryption, and as soon as the encrypted sparse bundle is created, cancel the backup.
    Mount the sparse bundle, open the disk image, and delete the Backups.backupdb folder inside it.
    Connect the USB drive to your Mac, mount that sparse bundle, open its disk image, and copy the Backups.backupdb folder to the one on the TC.
    Depending on how large the sparse bundle is, that could easily take a couple of days, at least, even connected via Ethernet.
    Just for testing one day, I encrypted a very small set of existing test backups on a F/W 800 drive - 6 dated backups using a whole 12 GB.  Took an hour.
    An alternative would be, just do the "archive" and keep the USB drive "on the shelf" for a while.  You can always connect it to your Mac and access those backups via the Browse Other Backup Disks option. 
    Trying to keep a couple of years worth of backups usually isn't a good idea.  It's a very complex structure, so the odds of damage increase, it takes much longer to populate the TM browser, and it works slower and slower, and if you didn't need something for 6 months, are you really going to need it in 2 years?

  • How best to save photos?  I want to protect my photos (15,000 of them) by putting them on a portable drive and storing it in my safety deposit box.  Is it better to export them all, drag the Photo file, use Time Machine – or are there better alternatives?

    I am a 'newby' to the discussion world.  Hope I am doing this right.  How best to save photos?  I want to protect my photos (15,000 of them) by putting themon a portable drive and storing it in my safety deposit box.  Is it better to export them all, dragthe Photo file, use Time Machine – or are there better alternatives?

    Welcome to the discussions! You can use Time Machine and I would also recommend for you to manually copy your iPhoto Library (on your Pictures folder) to an external drive/thumb drive so you can restore it from there should you loose your TM backup. Exporting them from iPhoto would not preserve the libraries' integrity neither your originals, should you choose to edit them in iPhoto.
    Regards.

  • Time Machine options are not working. I am unable to schedule automatic backups.

    Time Machine options are not working. I am unable to schedule automatic backups.  The On-Off button is grayed out. I can perform a backup manually.

    Thanks for responding.  I have an external disk with plenty of room.  It is used only for backup of my computer.  I get a backup by clicking on the Time Machine icon at the top of the page and select "Back Up Now."  When I click on Time Machine Preferences, there is a box labeled "Options" which allows me to exclude items from backup and notify after old backups are deleted.  There is no option to schedule a backup.  The "OFF/ON" box is gray.  For "Next Backup:" it says "Automatic backups off."  I would like to turn it on.

  • Does time machine back up my applications

    does time machine back up my applications and passwords?

    Time Machine makes a backup of everything stored on the OS X partition, so the applications and passwords will be backed up unless you have them in another partition. If you want more information about Time Machine, see > http://support.apple.com/kb/HT1427

  • Since upgrading to Lion, my time machine backups are failing - error message: The backup disk image "/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska's MacBook.sparsebundle" could not be accessed (error -1). Any ideas?

    Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)."  I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time.  Any suggestions?  Thanks

    Any new info on this? 
    I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro.  Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
    Grrr...

  • When I try to set up Time Machine, there are no back up disks displayed.  Therefore, I cannot turn on Time Machine.  How can I fix this?

    When I try to set up Time Machine, there are no back up disks displayed.  Therefore, I cannot turn on Time Machine.  How can I fix this?

    Thanks - let it finish, but zero out data is unnecessary. That option is intended to thoroughly erase previously recorded data so that it cannot be recovered without sophisticated data recovery techniques.
    Case sensitive is OK but I suggest you simply select Mac OS X Extended since "case sensitive" may complicate things for you in the future, should it be necessary to restore files to a case-ignorant volume.
    Once it finishes, make sure it appears as a selectable option in Time Machine. If it does your problems are solved, but consider using Disk Utility and reformatting it. This time don't worry about zeroing unused space, and select Mac OS X Extended (Journaled). It will only take a few seconds this time.
    For a more thorough description read Apple Support Communites contributor Pondini's FAQ: http://pondini.org/TM/5.html Read the pink box regarding the subject of case sensitivity.
    Also: Mac Basics: Time Machine

  • Can i go back with time machine but without the applications(to keep it the same)?

    can i go back with time machine but without the applications(to keep it the same)?
    i want to make my mac "younger" but i've got applications that i want to keep and i have them not so long ago...

    Clone your system them.
    Keep your OS and apps on separate hard drives.
    Install the OS if you must for now on another hard drive.
    Use Setup Assistant when done.
    = = =
    Using Cloning as a Backup Strategy
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner 
    http://www.bombich.com/software/updates/ccc-3.5.html
    OS X Lion Install to Different Drive
    How to create an OS X Lion installation disc MacFixIt
    Migration Assistant Update for Mac OS X Snow Leopard
    http://www.apple.com/support/lion/installrecovery/
    Create an OS X Lion Install disc
    http://reviews.cnet.com/8301-13727_7-20080989-263/how-to-create-an-os-x-lion-ins tallation-disc
    How to clone your system:
    http://macperformanceguide.com/Mac-HowToClone-backup.html
    http://macperformanceguide.com/Mac-HowToClone.html
    http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
    http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html

  • HT1391 I purchased 3 new tv episodes on iTunes and downloaded them on my iPad, from iCloud.  They don't appear on my iPad Videos app and I've tried downloading them several times.  Where are they?

    I purchased 3 new tv episodes on iTunes and downloaded them on my iPad, from iCloud.  They don't appear on my iPad Videos app and I've tried downloading them several times.  Where are they?

    The question is not only how to to hide them, but also how to mark them as watched!

  • Time machine backup, now all applications are gone and cant reinstall anything

    My computer froze earlier today and I rebooted and I kept getting the grey loading circle.  Nothing seemed to work so I loaded in safe mode and reinstalled from an earlier version of a backup i had on time machine.  When the computer booted back up, all the applications on the computer were gone, replaced by little grey question marks.  I had no access to the internet and none of my other time machine backups seem to have applications either.
    I have tired command R to reinstall, and that doesnt work either.  I have a copy of 10.6.3 Snow Leopard on disc but that doesnt work either because when I try to launch it, i get a message saying the application needed to launch snow leopard is not available. 
    I am at a loss as to what to do.  I cant install any applications that i know of to let me install snow leopard so I am left with a brick.
    I was running Lion at the time, but i have no backup copy of that, and no way to put it on here.  I would like to do a clean install with snow leopard, any tips you could give me to help would be great.

    What happens when you try to start holding Command and R keys?
    From what I see, it looks like you restored a Snow Leopard backup onto Lion, which damages OS X.
    Now, what I recommend you to do is to insert the Snow Leopard DVD you have and hold the C key while your computer is starting. Then, choose your language, go to Utilities menu (on the menu bar), choose the option to restore a backup and follow the steps.
    After restoring the backup, open  > Software Update, and install the latest version. Finally, upgrade to OS X Lion by downloading it from the Mac App Store

  • Time capsule sparse bundle reading "temporarily unavailable" and Time Machine files are not in order; what can I do to check on my backup systems?

    I have my time machine set-up with my time capsule/airport.  I cannot open my backups in the time capsule as it reads "spars bundle temporarily unavailable."  Also, my time machine backup files are missing some files and not in oder by name as designed.  It seems something is is not working.  I have don a disk repair on the time capsule.  I have closed and reopened my computer.  Still unable to open time capsule.  Does anyone know where else I need to check for errors?

    There are two key but related bugs in Yosemite..
    The big one IMHO at least is the network one.. and the secondary one is TM which is itself unreliable.
    To fix the Network ones we have a long list of things to do.. but you do apparently have access to the TC so for now that is not the major one.
    However some of your statements mean I am a bit lost on what you have done.
    I cannot open my backups in the time capsule as it reads "spars bundle temporarily unavailable."
    If you cannot open your backups how can you find that the backup files are missing. The files are missing from the sparsebundle which you cannot open??
    my time machine backup files are missing some files
    You cannot repair the disk of the Time Capsule.. only the Sparsebundle can be checked.. that means that you have accessed it and mounted it for disk utility to check it.
    I have don a disk repair on the time capsule.
    So I am confused about the comments.
    What I would recommend is the standard set of fixes to Yosemite.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    ie Start from a factory reset. No files are lost on the hard disk doing this.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 and TCwifi for basestation and wireless respectively.
    Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
    2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    This user has had success and a few others as well.
    RáNdÓm GéÉzÁ
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
    That is all to cover the network side of things.
    Time Machine issue is a harder one because there is no simple work around I can give you.
    My recommendations are to stop using a TC and test TM to an external hard disk plugged into the computer.. Do a whole new backup and see if that is fully working and accessible.
    Or change over to third party program for backup.. I do recommend Carbon Copy Cloner as I use it personally but SuperDuper has a good reputation and there are others. It is far easier and quicker to test a bootable clone made with CCC as you simply boot from the backup.

  • My old backups on the Time Machine disk are not accessible.

    Hi everyone,
    I installed a fresh OS X Mountain Lion yesterday. I tried to use Migration Assistant (in the Utilities folder) for the first time, to migrate my old data from the Time Machine back-up disk.
    After almost 6 hours, my data was completely in place from the backup disk. In fact, the data was gotten from the latest version of backups as I expected. But now, when I go to Time Machine to browse my old backups, it seems that all backups are still there, detected by the Time Machine itself, but it is not possible to access any of them.
    In fact, selecting one of the past backups from the Time-Line on the right edge of the screen, has no effect. All the windows behind the current finder window in the Time Machine are also dimmed, seems that no backups are there. But the Time-Line on the right edge of the screen displays several items from the first backup on my disk to the latest which was for the day before yesterday.
    This is not what I expected from the Time Machine. I was so glad when the Migration Assistant read all my data from the backup disk and put them in place. But I did not expect to lose my old backups which are still there on the disk, but Time Machine behaviour is like the times where there are no backups.
    It is important to note that before migrating data using Migration Assistant, I was able to browse all my backups in the Time Machine. This was also one the great features of Time Machine, since I had a fresh OS installation, and all my data from the past were accessible in the Time Machine.
    I could also get my data one by one and restore them in-place using Time Machine but it was some how cumbersome.
    Now is there any one to let me know why this has happened? I Appreciate your time to write.
    Mani Hamedani

    Troubleshooting information:
    Time Machine Troubleshooting
    Time Machine Troubleshooting Problems 

  • My Time Machine backups are significantly larger, and slower, over WiFi than Ethernet

    My regular hourly backups from my Time Capsule began acting up a month ago. They were abnormally large (25-100 MBs) and took a long time--once, six hours.
    I connected my Time Capsule to my MacBook Air through ethernet to repair the disk through Disk Utility, (I turned Airport off on the Air, but not the Time Capsule), and then to rebuild the Spotlight index for the Time Capsule.
    Backups over ethernet work just fine now. The backup will happen in two parts, of around 200 KB each, and take two or two and a half minutes. But when I turn Airport on the Air back on, reconnect to the WiFi network, unplug the ethernet cable, and immediately start a new backup over WiFi, the two parts balloon to around 20 MB each, and the backup takes hours.
    This is a backup over ethernet, which took 2 minutes, 21 seconds:
    Starting standard backup
    Attempting to mount network destination using URL: afp://Martin%[email protected]/External%20HD
    Mounted network destination using URL: afp://Martin%[email protected]/External%20HD
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/External HD/Martin Fox’s MacBook Air.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    No pre-backup thinning needed: 1.70 GB requested (including padding), 733.41 GB available
    Copied 1082 files (104 KB) from volume Macintosh HD.
    No pre-backup thinning needed: 1.70 GB requested (including padding), 733.41 GB available
    Copied 429 files (153 bytes) from volume Macintosh HD.
    Starting post-backup thinning
    Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/Martin Fox’s MacBook Air/2012-05-11-225349: 733.41 GB now available
    Deleted backup /Volumes/Time Machine Backups/Backups.backupdb/Martin Fox’s MacBook Air/2012-05-11-200538: 733.41 GB now available
    Post-back up thinning complete: 2 expired backups removed
    Backup completed successfully.
    Ejected Time Machine disk image.
    Ejected Time Machine network volume.
    This is the second backup after that one, done over WiFi. (The first was incompletely recorded by Time Machine Buddy, but took around half an hour.) It took 1 hour, 54 minutes, 50 seconds:
    Starting standard backup
    Attempting to mount network destination using URL: afp://Martin%[email protected]/External%20HD
    Mounted network destination using URL: afp://Martin%[email protected]/External%20HD
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/External HD/Martin Fox’s MacBook Air.sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    No pre-backup thinning needed: 100.0 MB requested (including padding), 733.41 GB available
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Waiting for index to be ready (101)
    Copied 26 KB of 20.6 MB, 98 of 98 items
    Copied 1485 files (22.0 MB) from volume Macintosh HD.
    No pre-backup thinning needed: 1.72 GB requested (including padding), 733.41 GB available
    Error: (-8084) SrcErr:YES Copying /Users/foxmarti/Library/Application Support/Firefox/Profiles/ehjqi949.default/places.sqlite-wal to (null)
    Copied 1941 files (27.5 MB) from volume Macintosh HD.
    Starting post-backup thinning
    No post-back up thinning needed: no expired backups exist
    Backup completed successfully.
    Eject

    slyfox1908 wrote:
    I live in an apartment building so there are a number of WiFi networks around.
    Not to mention cordless phones, microwaves, etc., any of which can interfere. 
    On iStumbler, my network shows up twice--once on channel 149, with signal strength of 50-65% and noise of 15%--and again on channel 10, with signal strength of that wildly varies from 20% to 90% and noise of 20%. Other networks in the building are on channels 1, 2, 6, and 11. The graph of channel 149 is very smooth, while the graph of channel 10 is choppy.
    It's probably using 149, as those numbers are pretty good.   Press Alt/Option before clicking the Airport icon in your menubar to see which band it's using.
    Watch the band it's using while running a backup.  Try other channels in the area of 149.  Unfortunately, it's a bit of a "hit and miss" thing. 
    Why are there two networks? Is that part of the problem? My Time Capsule is located about three feet right and a foot below my desk, so I can't think of a reason why it wouldn't be 100% for both channels.
    It's a dual-band router.  As I understand it, OSX will pick the best signal.
    I really want to know I have a clean, safe, accessible back-up before I replace it though. Right now I don't trust the Time Capsule.
    Do at least your last backup via Ethernet.

  • Where are my applications?!

    A week or two ago I purchased a new iMac for the office. When I set it up, I migrated all my files and applications from the old computer to the new one. The new one has had a few bugs since then (which is a different, longer story), so I decided to reinstall the system software and start from scratch. Rather than migrating all my old files and applications from a Time Machine backup, I went ahead and set everything up manually.
    However, my Applications folder seems to be missing a lot of very important applications. Namely, the entire iLife '08 suite with the sole exception of iWeb. That's right. No Garage Band. No iDVD or iMovie. Not even iPhoto. What the ****?
    Lucky for me I have everything backed up so I know I can recover all of these apps. But I'm wondering why the system install disk that came with the computer won't reinstall these applications? It makes no sense. Any thoughts?

    dr.scott wrote:
    What's Pacifist?
    One related note, will using the Migration Assistant utility re-install just my user account settings and files from Time Machine or it will also re-install the Application folder in its entirety?
    Pacifist is a tool that is used to extract apps from the Apple DVDs.
    It is available here:
    http://www.charlessoft.com/
    If the iLife is on the install CD or DVD, it might be under extras or in some obscure place.
    You might insert the disk and use Finder to browse through it, although some apps are hidden, which is why Pacifist is often useful.
    I have never migrated from TM so I don't know the answer to your second question, but when I migrated from my other computer to this one with Tiger, all the apps came along.
    If you find iLife on the TM backup, you should be able to simply restore it directly without using any migration tool. Just use TM itself, click on iLife or whatever app is missing and restore it.
    Message was edited by: nerowolfe

Maybe you are looking for

  • How to create multiple instance on same database

    Hi , I would like to know how to create multiple instance on same database . I know that some people use database configuration assistant to do this but i could not figure out how they did it. Any how if some one can help me with this and can give me

  • Error while creating the Flash Chart

    Hi , While creating the Flash Chart i got the following error.. Error Item ID (4789301958029267) is not an item defined on the current page. What does it mean???? My Chart Series is: SELECT NULL LINK, DISTRIBUTOR, CLGASSETS, FOLIOS FROM ( select NULL

  • Importing CHM files

    I inherited a user manual, originally in the form of a monolithic MS Word document from which PDFs could be created in any number of ways - and an outsourced RH *.chm help file. We have moved to the Tech Comm Suite (patched.to latest level). I have s

  • Group 2 monitors together in a 3 monitor display

    I am running 3 monitors (2x 1600x900 and 1x 1280x1024). I am using Windows 7 Enterprise. The PC I RDP into is a windows XP virtual PC with only 1 display. What I want is to setup the RDP to span the 2x 1600x900s - I can do so only by entering in a cu

  • Print Booklet 2 of 16 spreads only show

    I'm trying to print a 32 page (1/2 letter) recipe booklet and when I choose the option to print booklet, it only shows me pages 1&32 and 12&14. I'm pretty familiar with print to booklet and this has never happened to me before. I've searched around t