Time Machine will not back up next day.!!!

I have been having huge problems with Time Machine backups.
I have a G-TECH, G-DRIVE external HD. 500GB. I got it to replace a LaCie d2 Quadra which started malfunctioning.
I have formatted it using disc utility ( GUID partitioning and erasing etc. Mac OS Extended (journaled). Made 2 partitions, erased them, then back to one, erased that etc. I have done a repair on the disc and it says there is nothing wrong with the disc. So I have basically got Time Machine up and running. It behaves fine, backing up every hour. I can put the iMac to sleep when needed during the day, and on waking it up Time Machine still does what it is supposed to do. THEN, if I put it to sleep when I go to bed (11pm), when I wake it up in the morning......The first backup it tries to do, fails. Then the G-DRIVE will not unmount ( it says it is still in use, try quitting applications and try again. There are no applications running). When I eventually get it to unmount by diconnecting the drive and going through the reformatting process all over again, and creating another complete backup, which takes about three hours or so. Same thing happens, it behaves normally until I wake it up the next morning and the first backup fails again. I have reindexed spotlight.( at least I think I did it correctly) I followed some instructions found on another forum).. When I look in console...All Messages....it says
21/01/2008 04:26:33 kernel disk1s2: I/O error.
21/01/2008 04:26:33 mds[22] (/Volumes/Gdrive/.Spotlight-V100/Store-V1/Stores/C81D9AD9-C97C-4560-8D40-2FB0DF F595E6)(Error) IndexCI in CIMetaInfoSync:sync err: 22
21/01/2008 04:26:33 mds[22] (/Volumes/Gdrive/.Spotlight-V100/Store-V1/Stores/C81D9AD9-C97C-4560-8D40-2FB0DF F595E6)(Error) IndexCI in indexShadowFiles:open err: 22, 0.shadowIndexHead
21/01/2008 04:26:33 mds[22] (/Volumes/Gdrive/.Spotlight-V100/Store-V1/Stores/C81D9AD9-C97C-4560-8D40-2FB0DF F595E6)(Error) IndexGeneral in notify_lowspace:low space for device 234881029 (/Volumes/Gdrive/.Spotlight-V100/Store-V1/Stores/C81D9AD9-C97C-4560-8D40-2FB0DF F595E6)
21/01/2008 04:26:33 mds[22] (Error) Volume: LOW DISK SPACE device:234881029
21/01/2008 04:26:33 /System/Library/CoreServices/backupd[560] MDBackupBegin() returned result (915) > 0, waiting
21/01/2008 04:26:33 mds[22] (/Volumes/Gdrive/.Spotlight-V100/Store-V1/Stores/6DAC2E7C-FB74-48DC-B604-5DF832 275975)(Error) IndexCI in ci_ftruncate:ftruncate(75 /Volumes/Gdrive/.Spotlight-V100/Store-V1/Stores/6DAC2E7C-FB74-48DC-B604-5DF8322 75975/live.0.indexPostings, 4096) error:22
and so on.
I don't undestand why it is possible to put it all to sleep during the day for an hour or so then it still works fine...But not on waking it up the following day ???
Any help would be gratefully received as I am slowly going mad here.
Thank you.

I had a problem where it would not backup any more. Some of the diagnostics that they had me do were:
1. Repair Disk on the TM drive
2. Try backing up by clicking/holding the TM Icon and choose Backup Now
If failed:
3. Reboot Leopard
4. Try step 2 again
If Failed:
5. Disk Utility repair permissions
6. Try step 2 again
If Failed:
7. Log out and login as administrator
8. Launch Console from the Utilities Folder
9. In the System Log Search for "Time Machine"
10. Use that to help figure out problems and call Apple Care

Similar Messages

  • Time machine will not back up to time capsule

    Time machine will not back up to my Time Capsule on my MacPro running SnowLeopard. Error message says it cannot access the backup file. I have reset the TC, and erased the drive and I get the same error on initial backup. I can see the volume and drag files to it, so the disk appears OK. What's going on here?

    Depending on exactly what message you get, you might need #C17 in Time Machine - Troubleshooting
    If not, please post the message (a screenshot would be fine).

  • Time Machine will not back up external photo drive

    Time Machine will not back up external photo drive, slightly different format, one case sensitive the other not. How do I resolve. Bought new external drive same format as TM in the hope  that I could copy the files from photo drive but that will not copy all files  as it is saying file already there. Again the case sensitive issue...
    Paranoid about losing  1Tb of photos all cataloged in LR5
    Possible solutions I have looked at but not yet tried.
    Use the new 2Tb drive to make a new TM backup then reformat the old 4Tb drive the same as Photo drive.
    Then do a complete backup of all files and photodrive to TM.
    A lot of work, USB 2, so if any one has a simpler answer I would love to hear.
    Roger

    crash888 wrote:
    I reinstalled Snow Leopard on my Mac Mini after having some issues. After reinstallation, Time Machine would no longer backup to my External HD because it will not allow me to change permissions.
    What message did you get? You should never change permissions (or anything else) on a Time Machine drive -- TM does that for you.
    Start with #C2 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.
    It will show you how to locate the message(s) that describe the problem, then help you fix it.
    If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.

  • My time machine will not back up and i get this message: /Volumes/Data/Kathy P's MacBook.sparsebundle" is already in use

    my time machine will not back up and i get this message: /Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use....i have tried multiple fixes but still unable to back up

    If  you have tried the fixes in Pondini's Time Machine Troublshooting, specifically #C12 and nothing helps, then it is time to let one of the genius types at an Apple Store take a look.
    http://pondini.org/TM/Troubleshooting.html
    If you cannot take the Time Capsule to an Apple Store, contact Apple Support directly.
    http://www.apple.com/support/contact/

  • My time machine will not back up. It says backup failed each time i try to back up. I tried switching it off but still nothing. It says "already in use" Please help!

    My time machine will not back up. It says backup failed each time i try to back up. I tried switching it off but still nothing. It says "already in use" Please help!

    The late James Pond left us these wonderful illustrated guides, including this one:
    Time Machine - Troubleshooting
    C12. "The Backup disk image ... sparsebundle ... is already in use."

  • Time Machine will not back up to My Passport Edge for Mac. How do I delete the aliases to make room?

    Time Machine after running for a few weeks says 'Time Machine couldn't back up 'My Passport Edge for Mac', also new. It needs 365.05 GB only 49.94 are available.
    When I click on the My Passport Edge for Mac, I see that it has alias for each file. How do I delete the alias in order to backup my Time Machine???

    You do not ever delete anything on the Time Machine drive using the Finder.
    Those Alias files are essential to the internal operation of Time machine, and is what allows it to keep only one copy of a file that appears, unmodified, in multiple Backup Sets. If you modify them in  any way, you risk Time Machine losing ALL your data.
    I expect your backup drive is simply not large enough to do what you are trying to do.
    To learn about Time machine, start on this page and keep clicking on the ( next page ) links for additional pages in the linked articles:
    How Time machine works its magic
    Your best short term solution may be to start a new backup, which will be smaller that the multiple backups on your existing drive. In the long run a Drive 2.5 to 3 times the size of what you want to backup is recommended.

  • TIme Machine will not back up to External Hard Drive

    I reinstalled Snow Leopard on my Mac Mini after having some issues. After reinstallation, Time Machine would no longer backup to my External HD because it will not allow me to change permissions. I right click on my "Backup" drive and change the permissions to Read + Write but it just sets it back to "Custom". I'm guessing that the reinstallation changed my account information but I'm not sure how to fix this. My External HD shows in Disk Utility that it is still almost full of Time Machine backups but I have no way to access them or to continue to use Time Machine for future backups. Any help would be much appreciated. Thanks!

    crash888 wrote:
    I reinstalled Snow Leopard on my Mac Mini after having some issues. After reinstallation, Time Machine would no longer backup to my External HD because it will not allow me to change permissions.
    What message did you get? You should never change permissions (or anything else) on a Time Machine drive -- TM does that for you.
    Start with #C2 in the Time Machine - Troubleshooting *User Tip* at the top of this forum.
    It will show you how to locate the message(s) that describe the problem, then help you fix it.
    If that doesn't help, post back with details, including all the messages, your setup (especially the destination for the backups), what you've done, and the results.

  • Time Machine will not back up after updating from 10.2 to 10.3

    This just started yesterday so it has to be due to the update.
    The following error message is given in the Time Machine settings:
    The backup disk needs 257.55 GB for the backup but only 234.84 GB are available. Select a larger backup disk or make the backup smaller by excluding files.
    250 free gigs on my backup disk but it can't make the backup? What? I currently have 900GB filled on my regular hard drive but I don't back up all of it. I exclude about 150GB from backup, so the machine estimates the total backup size to be 759GB. The backup drive already has 764GB filled, so I'm not sure where all this extra info is coming from. Haven't downloaded anything besides the new update.
    Any ideas on what to do?

    This procedure is a diagnostic test. It makes no changes to your data.
    Please triple-click anywhere in the line below on this page to select it:
    tmutil compare | open -ef
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    The command may take several minutes to run. Wait for a new line ending in a dollar sign ($) to appear below what you entered.
    A TextEdit window will open with the output of the command. Don't post all the output; just read it yourself. Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
    Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
    Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
    Files that you’ve excluded from backup, or that are excluded automatically, are ignored.
    At the end of the output, you’ll get some lines like the following:
    Added:
    Removed:
    Changed:
    These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.
    Caution: Under some conditions, tmutil may falsely flag files as not having been backed up when in fact they have been. It can be confused by multi-linked files, or by files with a modification date earlier than the one in the snapshot. This will not be an issue for most users. If the results of the above procedure surprise you, inspect your snapshots directly.

  • Time machine will not back up home folder

    I have been using time machine and an external HD to back up my Macbook Pro for about two years, and yesterday I needed to recover an older version of a file in my Documents folder. I went into TM to find that it hasn't backed up my home folder in over a year. I have read other threads with similar problems and tried those fixes. Specifically:
    1) There is nothing on the exclusion list in TM options
    2) I have reset TM (by deleting the plist file in the library and restarting) several times, with no success
    3) I created a test account and verified that its home folder is being backed up normally
    4) I reformatted the TM external hard drive
    5) My home folder is not called "home"
    All other folders are being backed up normally as far as I can tell. Any ideas for how to fix this would be much appreciated.

    Also, I am not using FileVault.

  • My time machine will not back up.  It says the backup disk image "/Volume/Data/Eunice.sparsebundle" is already in use

    What does that mean and how do I correct it so it will back up?

    Restart your MacBook and your Time Capsule (or disconnect your Time Machine external drive). Finally, you will be able to make backups of your files again.
    If you have got a Time Capsule, Apple released a firmware update that fixes this issue. Open AirPort Utility (in /Applications/Utilities) and follow the steps. See > http://pondini.org/TM/C12.html

  • Time capsule/Time machine will not back up.

    I have just installed a new 1TB 'Time Capsule' for wireless backup. I've managed to set it up with a new Airport Express 802.11 The green light is always on and I can open the 'Time Machine' setup box. When I try to backup for the first time I get a 'Time Machine Error' message 'The backup disk image could not be created'
    Does anybody have an answer for this as I've already wasted a day trying to get it to work.
    Many Thanks.

    This seems to be a common error, see if this thread helps:
    http://discussions.apple.com/thread.jspa?threadID=1427969&tstart=0

  • My Time Machine will not back up.

    I think because the Hard Drive is full but isn't Time Machine supposed to delete the oldest backup to make room? Should I delete the oldest back up?
    I have just upgraded to a new iMac and want to upload some old files from the old back up.

    OSX 10.9.2. It is a 27 inch Imac with a 4.3GHZ Intel Core i5

  • My time machine will not back up disk image

    I suddenly two days ago got this back up message.  I just retryed and got the same message.
    The backup dis image"volumes/Time Capsule/my computers name.sparsse bundle" is already in
    use. 
    Now what? I am pretty computer illiterate Do I need to go to the store?
    Maggie

    msmag wrote:
    I suddenly two days ago got this back up message.  I just retryed and got the same message.
    The backup dis image"volumes/Time Capsule/my computers name.sparsse bundle" is already in
    use. 
    Now what? I am pretty computer illiterate Do I need to go to the store?
    Maggie
    This is the most common issue with Lion and especially ML..
    Although your equipment still show Snow L, I am sure you upgraded.. as SL is far more stable than that.
    It is a bug.. reboot the TC and everything will work again generally.
    Read C12 and C17 here http://pondini.org/TM/Troubleshooting.html

  • TS1550 My time capsule will not back up. There is a time machine error message that states "The backup disk image "/volumes/Backup/Jane's MacBook Pro.sparsebundle" is already in use. How do I correct this problem?

    My time machine will not back up. I get a Time Machine Error message that reads: "The backup disk image "/Volumes/Backup/(myname)'sMacBook Pro.sparsebundle" is already in use.
    I have not been able to back up for two weeks, I think this occurred after an update to the operating system, but I am unsure.
    How do I correct this problem?

    Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

  • I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I also had problem accessing my WD MyBookLive after upgrading to Maverick.
    To resolve the problem, I used  Connect To Server (Cmd K) to specify the IP address.
    Then I enter a user id and password I created in the MyBookLive.
    You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
    Just enter the MyBookLive IP address as the URL.

Maybe you are looking for

  • Is there a way to decipher what chords are being used in an audio track?

    I use logic pro x software and I was looking at this piece of audio. It's a synth lead and I wanted to create a bass to go with it however it's hard to work out the chords used so I was wondering if there are any add ons or something that can tell me

  • More Guru Winners for February 2015 in the FIM category and many others!

    It's been a busy week that also saw the TECHNET WIKI SUMMIT 2015 Then we had the results for February's TechNet Guru competition ALSO posted! http://blogs.technet.com/b/wikininjas/archive/2015/03/19/technet-guru-february-2015.aspx Below is a summary

  • WebDAV not working over SSL on CSS11503

    SOME HISTORY As you may recall we had an issue with interoperability between our WebCT Vista application and the Cisco CSS11503 Load Balancer. In a nutshell the Load Balancer would inject custom HTTP headers into HTTP packets, but only into the first

  • Hard Drive won't mount in Yosemite

    I just updated to OS X Yosemite... as soon as I plugged in my external hard drive, I noticed it wouldn't mount (Toshiba Canvio 3.0, formatted mac os extended journaled). It will show up in disk utility but won't mount, and isn't solved running first

  • Problem calling PL/SQL procedures from Function Activity Issue

    Hi, I am working with Oracle Workflow and I have found some problems adding a function activity in the process diagram. This function only updates some registers on the data base, or at least it should do that. I have been looking through the items i