Time machine will not find my nas

I have a macbook running OS X Mountain Lion-  I would like to set up time machine to back up this macbook to my NAS hd - It is a Netgear Stora unit that works great.  It has 2 4tb hd's that mirror each other

benfromminneapolis wrote:
I have a macbook running OS X Mountain Lion-  I would like to set up time machine to back up this macbook to my NAS hd - It is a Netgear Stora unit that works great.  It has 2 4tb hd's that mirror each other
What router are you using between your macbook and the Stora? Do you have the latest firmware update?
Netgear has acknowledged they are aware of a problem and still have not released the functional fix.
Here is a link to the Netgear forums with a possible work-around that may help you.

Similar Messages

  • Time Machine will not find any hard drives

    I originally posted plugged in an external drive and use TM and back up on there but then i unplugged the external Mass storage device (it was a WD drive). Then I tried to use TM and it didn't work. I want to have TM run on my computer with out having an external drive attached. How can I do this? Also if at all possible could I run time machine on my computers internal drives and also have it on a back up external drive just incase of a computer failure.

    Hi! You can designate any internal or external drive for Time Machine to use for backup. You can also use the external as a bootable clone if it is a firewire device and is bootable itself. You do this by cloning the drive which can be done using the disk utility, SuperDuper or CarbonCopyCloner. Tom

  • Time machine will not work after upgrade

    Since I upgraded to Mavericks on Oct. 22, Time Machine will not run properly, or at all for that matter.  It tells me that it is 'Preparing Backup', but it was said that for over 4 days now.  Suggestions?

    I had a strange issue with Time Machine and Mavericks. Time machine wouldn't recognise the external USB drive I was using for backups. There was nothing in the logs, no errors, the time for the backup would come along and then it would skip to the next hour with no backup being done. What I was doing was removing the drive from Time Machine Preferences and re-adding it, TM would then start a manual backup and from that point it would run fine.
    I ended up doing a Disc Verify on the drive (all ok, no issues) and shut the machine down. Today I booted up and staright away the TM Icon for the drive is correct and the TM is running as it used to.
    I have three macs, all with external USB drives, the other two macs have no issues with TM, only my main one. Having a look at other issues, my external drive is a Western Digital unit so maybe that has something to do with it, though it can see the drive fine from Finder.
    Anyway, if you are having similar issues, just run the Disc Verify Utility (and repair if there are errors) and hopefully it'll fix up that particular issue.

  • Time Machine will not backup Time Capsule drive

    I was filling up my time capsule so I bought a new 2GB drive for my backups. It is attached as an air disk on the Time Capsule as I also use it to backup other computers in the house.
    My problem is that I am now using the HDD in the time capsule for my iTunes and iPhoto library, so that they can also be shared, but they are not being backed up by TM.
    I have checked my excluded drives list and the Time Capsule drive isn't in there.
    Any ideas/help/advice on how to get the time capsule backed up too?

    Sorry, but Time Machine will not backup a network drive (i.e. TC's HDD or any USB HDD attached to the TC). It can backup TO a NAS such as TC or a USB HDD attached to the TC. You can transfer your music to another external HDD that is connected directly to a Leopard-loaded Mac and TM can backup that up to TC/HDD attached to a TC.

  • Time machine will not see USB attached drive

    I am having some difficulty getting Time Machine to see a USB attached Lacie drive. I can get it to mount through the finder, but Time Machine will not see it. It also works fine through a direct firewire connection. I have all of the current updates. Any help is appreciated.

    Well after much trial and error I figured it out. I had to enable file sharing with a disk password. Before I had it set up for accounts and it was not mounting properly.

  • Time Machine will not see USB drive attaced to AEBS

    I am having some difficulty getting Time Machine to see a USB attached Lacie drive. I can get it to mount through the finder, but Time Machine will not see it. It also works fine through a direct firewire connection. I have all of the current updates. Any help is appreciated.

    have you tried formatting the drive, by selecting the disk or volume and using extended (journal). If the drive use to be a PC drive, you need to also give it a new index table. To give it a new table, you got to go to the partition section and use the option button. There will be 3 types, the GUID table is for intel macs, the 2nd selection is for PPC macs, and the third is for Window/Dos. You want to use to GUID table. After the table is set, format the disk using extended (journal).

  • Time machine will not back up to time capsule

    Time machine will not back up to my Time Capsule on my MacPro running SnowLeopard. Error message says it cannot access the backup file. I have reset the TC, and erased the drive and I get the same error on initial backup. I can see the volume and drag files to it, so the disk appears OK. What's going on here?

    Depending on exactly what message you get, you might need #C17 in Time Machine - Troubleshooting
    If not, please post the message (a screenshot would be fine).

  • I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I upgraded to Maverick and now Time Machine will not connect to the external hard drive to back up files.  The external hard drive is a Western Digital "My Book Live" 2 TB.  How do I solve problem?

    I also had problem accessing my WD MyBookLive after upgrading to Maverick.
    To resolve the problem, I used  Connect To Server (Cmd K) to specify the IP address.
    Then I enter a user id and password I created in the MyBookLive.
    You can also verify that you have admin access to the MyBookLive using Safari or Chrome.
    Just enter the MyBookLive IP address as the URL.

  • Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    Time Machine will not let me restore from backups after June, 2013.  I can see the files on the external hard drive but Time Machine skips all of them and goes back to June, 2013. Does anyone have any idea what the problem is?

    rtilghman wrote:
    telling me to buy a new router is NOT a solution.
    And why not? Apple is selling these things like BigMacs. They can't make enough of them. You've been suffering since May because you refuse to get a decent router.
    Can you imagine if a company that makes a refrigerator told me that I needed to upgrade my electrical system to rectify a problem with their device? What kind of response IS that?!?!
    What if the problem with their device is that it requires a new-fangled "grounded" outlet and your circa 1890 house doesn't have grounded outlets. Would you refuse to purchase a $ 25 adapter on principle?

  • My time machine will not complete the back up.  It say that my sparsebundle is already in use.  What do I do and how do I fix it?

    My time machine will not complete the back up.  It tells me that my sparsebundle is alreay in use.  I currently have imac ungraded my sofeware to the latest.  What do I do to correct this?

    Try here...
    The Backup disk image ... sparsebundle ... is already in use.
    From Pondini’s excellent Information Here...
    http://pondini.org/TM/Troubleshooting.htm

  • Time machine will not complete backup.

    Time Machine will not complete back-up - 3TB back-up is full and time machine will not automatically delete oldest back-up.

    This happens from time to time. You will need to step in and decide what to do.. Delete manually.. a very slow and fraught process.. or you have to take more severe action.. eg archive off the old backups and start again. You will need a 3TB USB drive to do it.. but IMHO is well worth it. Assuming you need all that history. You can then simply do a quick erase from Airport Utility which takes a minute or two and do a fresh backup.
    Try to eliminate files that are not necessary to backup.. eg the worst is any virtual disk for parallels or bootcamp.. where the slightest change to the smallest file will result in a full backup of the whole virtual disk. You must backup windows etc from inside the OS and not from TM in Mac OS.
    Have you upgraded the computer btw?? I get the feeling that when you upgrade a computer.. say Snow Leopard to Lion to Mountain Lion.. TM has real issues handling the old backups. It is much better to start over.
    Read up from our most productive expert.. Pondini..
    http://pondini.org/TM/C4.html

  • Time Machine will not properly backup to new 8TB glyph drive.

    Time Machine will not properly backup to new 8TB glyph drive. Folder reads ".inProgress". Can't see any files.
    How can I set it up to do proper, regular backups?

    8TB? holy cow.
    It's likely overwhelmed and doesn't know what it's looking at.
    Try using Carbon Copy Cloner instead, at least it will be bootable to use the computer.
    Most commonly used backup methods

  • Time machine will not backup but does restore

    My Time machine will not backup, but will restore from prior backups - the last made three months ago (end of January).  Can anyone help?  When trying to run a backup the screen shows:
    Select Disc (which I have already done)
    704 GB of 1 TB available
    Oldest backup: none
    A continuosly revolving progress bar
    "Preparing Backup"
    Note that when I run Time Machine in order to restore, all backups prior to Jan 30th are there.
    I am running OSX Mountain LIon Version 10.8.3

    Mickmannock wrote:
    I followed the proceedure described to delete /Library/Preferences/com.apple.TimeMachine.plist.  However I note that there are very many versions of this file in other locations.
    There shouldn't be.  Delete any others. 
    Make sure the one you deleted was in your top-level /Library folder (not the Library folder inside your home folder).  If you got the right one, when you went back to the Time Machine Preferences window, it should not have shown your TM drive or anything else.
    I am running Parallels 8 and windows 7 in a Virtual machine, but these do not appear to have created problems in the past - over two years now.
    You probably should exclude the VM files from Time Machine backups.  That shouldn't be the cause of much of this problem, but may be a problem in the future.  The reason is, to OSX, a VM file is one huge file -- if anything at all is changed, TM considers the whole thing changed, and will back it up again, taking time and lots of space on your backup disk.
    Have you Verified your internal HD, and Repaired any other disks being backed-up, and your backups, per #A5 in Time Machine - Troubleshooting?
    What are you backing-up to (external HD, Time Capsule, etc.)?  

  • Time Machine will not let me restore from recent backups.  I can see them on the external drive but will not restore sooner that June of 2013!  Any suggestions?

    Time Machine will not let me restore from recent backups.  I can see them on the external drive but will not restore sooner that June of 2013!  Any suggestions?

    All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

  • Time Machine will NOT work with Airport Disks!

    It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
    http://www.apple.com/macosx/features/timemachine.html
    It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
    Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
    I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

    Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
    1) Mount your AirDisk so it appears on your Mac
    2) Open Terminal.app
    3) change directories to the AirDisk's root folder located in "/Volumes"
    ie: cd "/Volumes/AirDisk Name"
    4) execute this command to "bless" the drive to be used with time machine:
    touch .com.apple.timemachine.supported
    5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
    This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
    Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

Maybe you are looking for

  • ACS appliance1120 ACS 4.2.1.15 syslog message to syslog server

    Hi All ,          I am using ACS 1120 appliance running ACS version 4.2.1.15 , I am pointing out all syslog message to my external syslog server (passed authentication , failed authentication , database replication , administration aduit ,tacacs acco

  • How To Simulate the Variant Functionality of se11.

    Hi all,    In Module Pool Program, in the Subscreen I have Kept the select-options for 4 zfields(custom fields). and there is Save Button in the Main Screen that is Calling the Subscreen Below.   My Requirement now is ,When SAVE is Done , I have to s

  • Recurring Crystal schedules fail if original data source changes

    We're using BO 3.1 (SP3 plus FP 3.3 and 3.5) with Oracle 11g repository and both 10g and 11g clients installed on the BO servers (Windows Server 2008 R2).  We've been trying to resolve an issue with recurring schedules of Crystal reports.  We always

  • Cleaning up of ManagedConnections

              Hi All,           I am using an adapter with local transaction support. I have one client which           is performing lots of transactions. Max No. of connections are 10 and min. no.           of connections are 5. The client gets a conne

  • File browsing dialog

    hi, i have an app that i want to extend with a functionality for the user to browse for a file. could someone please explain/direct me how to code this. many thanks, marcus