Time Machine with Synology

I am running Lion on iMAC witht he latest version. I have browsed through most of the post and try everything but still getting the follwoing error:
The network backup disk does not support the required AFP features.
Open Time Machine preferences to select a different backup disk.
Any suggestion on how to make this work. I have bought this Synology NAS for 2 days and make me frustrated for 2 full days.
Thanks
Liverpool

Hi....
Check that you have the latest DSM firmware for the NAS.
DSM version 3.2 have the updated appletalk, and should work ok.
Remember to enable appletalk and assign a share for TimeMachine in the Diskstation.
Works fine on my DS410
/Dennis

Similar Messages

Yosemite Time Machine with Synology slow

Hi all,
now im trying to run a time machine backup (50GB) since more than one week.
I don't now the bottleneck MacPro or the Synology Disk Station. But the access to the disk station
works fine, also normal network file transfer is running with a good performance.
Only the backup is running and running .... latest session he only managed 12 MB in 5 hours ?
In addition Yosemite 10.10 needs very long to start the backup (up to 1/2 h).
Im very happy about any ideas to fix the problem.
best regards
alex

A couple suggestions:
First, run Disk Utility on the external hard disk backup volume. It will take a long time; expect at least an hour.
Then:
Turn "off" Time Machine if it is not already off.
Rebuild the Spotlight index according to Spotlight: How to re-index folders or volumes (summary: drag the entire source volume to the exclusions list, click OK, then remove it by clicking the minus ("–") button.)
Next:
Navigate to the following folder by selecting the entire line (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Reveal in Finder:
/Library/Preferences/com.apple.TimeMachine.plist
Drag the entire folder to the Trash, reconnect your backup device if required, wait for it to mount, and turn Time Machine on again. Select Back Up Now.
This will not create a new backup nor will it erase your existing ones, but the values shown in the "backing up xxx of yyy" message and progress bar will be inaccurate until TM finishes the subsequent backup.
Determine if that fixes the problem.
Other macs (older MAC OS Versions) running perfect BackUps with the synology NAS in the same network.
Since that configuration is known to be unreliable, you do not have a backup strategy for those other Macs; you only have the illusion of one. Good luck.

Time Capsule and time machine with third party router

Hi,
This is the first time I use this site.
I have over three years old Mackbook.
APP has expired.
Now I want to know how to set up time capsule in a new environment.
I moved from Australian and Singapore.
I was using Time Capsule and Airport Extreme in Australia.
I have moved to Singapore.
I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
What I did so far is;
Connected the time capsule to the power point.
Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
Apple Utility does not recognise Time Capsule.
I prefer to use it wirelessly.
There are only two USB cable ports installed.
One is used to synchronize iPhone.
Other is used for a printer.
but if it is not possible, wired would be OK.
MacBook 13 inch 2.0 GH Late 2006
I hope that someone able to give me an answer for this.
Cheers,
morepubholidays

In this case the apple support people reveal a truly poor understanding.
You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
If you already tried this and it didn't work.. try again.. it is the correct approach.
You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
So here is how to get the utility into your computer.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0
Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
Select this and update..
Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

How can I restore my data from iCal? I didn't make any backup, but I use time machine with an external HD. I deleted iCal when I deleted my gmail account. I have tried to restore, but I can only restore the iCal software and not the data.

So what is your question?
If you forgot your encryption password:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore.
The above comes from here:
http://support.apple.com/kb/HT4946

When I try to enter a time machine with Snow Leopard backups Lion I get an error code -6584 ... how to fix?

Hi.
I had a first gen time machine with backups all on Snow Leopard.
This died (power supply), and I bought a new time capsule, because to fix the old one would cost nearly the same amount.
Since, I have started using Lion, and backed up onto my new time capsule in Lion.
Unfortunately, there was a file I deleted that I really need for a Logic Audio project, that is only present on the old time capsule.
I got the old time capsule fixed, so it powers up. I even extended my current wireless network with it. I can see inside it -- all the data that I dragged onto its HD in the past is present, and the "Sparse Bundle" containing the data for the time capsule save-states is present too.
Now, when I try to "Enter" my old time capsule, I get this error message:
I tried entering the time machine via WiFi and via ethernet, to no avail.
Can anyone help me to access these old save states on my old "snow leopard" time capsule?
I was thinking maybe I need to try to access it from a machine with Snow Leopard?
Please help.
Thanks in advance.
JM

I have the same issue. Does anybody know why this has happened

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule?

Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule via the USB port? My current Time Machine has a total capacity of 1TB. I'd like to double or triple its memory. I don't want to use the external hard drive in lieu of the Time Capsule hard drive. I'd like to use it in addition to. Just don't know if/how it's possible.
This is another one of those questions that I've searched the web for answers, and have gotten tricky answers back. So now I'm trying to introduce a clean slate to the mix.
Thank you for your time!

Well, what you mentioning is possible. However, I don't know whether it's supported (as in, "easy to set up."). Time Machine officially supports backing up to a locally attached drive, to a machine running a Time Machine server (i.e. running OS X Server software), and to a Time Capsule. I don't know that it officially supports a drive attached to an AirPort or to a Time Capsule. Though I know some people have gotten it to work.
Best I can say is to try it. Plug the drive into the Time Capsule, ensure it's shared on the network, and then try and set it as a backup target from a machine in the Time Machine backup panel (you'll need to ensure it's mounted first). If it works, you're all set.

Using Time MACHINE with a USB drive connected to an Airport Extreme

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
Please click here:
|
Using Time Machine with an Airport Extreme AirDisk
|
Note: If you got here by clicking a link that looks like this:
_. . . discussions.apple.com/thread.jspa?threadID=2299608#Q1_
Note the number at the end, after the +*pound sign,+* (#) and click the corresponding item below:
Please pardon the inconvenience.
|
QUESTIONS
*Q1. Can I use the USB drive(s) for Time Machine backups AND other data?*
*Q2. How do I set up Time Machine to back up to a USB drive connected to my Airport Extreme?*
*Q3. How do I delete backups?*
*Q4. How do I back-up my backups?*
If you don't see your question here, try Time Machine - Frequently Asked Questions.
|
PROBLEMS
*P1. The Backup disk image could not be created.*
*P2. Time Machine could not complete the backup . . sparsebundle could not be accessed. (Error 109).*
If you don't see your problem here, try Time Machine - Troubleshooting
This is the 3rd version of this tip. It was submitted on May 16, 2010 by Pondini.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

Hi, Nubz!
Yes, I just saw that, and am still chuckling.
Maybe that will mollify the Jive gods?
Thanks again,
Jim

Using Time Machine with a network Drive

I recently bought a WD My Book Live network drive to use as my Time Machine backup. I was previously using a USB external HD for Time Machine with no problems. I have set up the new network drive but when I go in to Time Machine to select it as the drive to back up to, it is not showing up. The only drive I see is my old USB external HD. I have the latest firmware for the network drive and I am running Mac OSX10.5.8. Any suggestions?

If you bought the WD in a USB enclosure it probably came formatted with NTFS (Windows). Time Machine can't use NTFS drives or SMB (Windows) network shares as a backup destination because that format does not allow the proper permissions to be set. If this is the case with your drive, open Disk Utility and reformat your new drive (NOT you system drive!!) with HFS+ aka 'Mac OS Extended (Journaled)' and then the drive should show up as a target selection in Time Machine.

How to use Time Machine with an external drive?

Hi…I’m new to this, I hope someone can help me=)
I’m trying to back up my Macbook Pro 10.6.8 using Time Machine with an external drive Seagate Backplus Slim. I’ve tried several solutions that I’ve found through different forums but still wouldn’t work.
Every time I opened Time Machine, it has this appearance:
Then when I click “Select backup Disk”, it goes on like this:
And after I click “Set Up Time Capsule”, it has this:
It keeps saying that it couldn’t find AirPort wireless, even though I have good WIFI connection.
Anyone know what I should do? Please help….Thanks everyone

Ayuphie ~ In your Time Machine Preferences panel, slide the OFF-ON switch to the ON position:

Setting Up Time Machine with a Partitioned External Hard Drive

I recently bought a new external hard drive (MyPassport) and I was advised to partition it in order to keep my movies/music files separate from the rest of my files. So I partitioned it, but now I can't figure out how to set up the Time Machine with 2 separate hard drives. Is there a way to set it up so that I can use Time Machine for both, one for movies/music and one for everything else?

I recently bought a new external hard drive (MyPassport) and I was advised to partition it in order to keep my movies/music files separate from the rest of my files. So I partitioned it, but now I can't figure out how to set up the Time Machine with 2 separate hard drives. Is there a way to set it up so that I can use Time Machine for both, one for movies/music and one for everything else?

Time machine with network drive?

I heard I could use time machine with the hard drive I have connected to my airport extreme. Problem is I can't get the disk to appear in the time machine set up window as an option

Unfortunately Apple does not support Time Machine backups to a HDD attached to the AirPort Extreme USB port. Doing so is not recommended as most users who attempt this end up with corrupted backups over time. However, you could use a different backup solution with this configuration, just not Time Machine.

Using time machine with uverse

How to set up time machine with uverse

Time Machine is software.....to allow your Mac to back up its contents to another hard drive.
You may be asking about a Time Capsule......which is hardware.....a router with a built in hard drive that stores the Time Machine backups from a Mac.
Maybe you could provide a bit more information to clarify what it is that you want to do.

I am trying to get an answer to whether or not I can successfully use Time Machine with an external HDD connected to an airport extreme? Some forums say yes, some say no.

I am trying to get an answer to whether or not I can successfuly use Time Machine with an external HDD connected to an airport extreme. Some forums say yes, some say no. I'm also curious about formatting the hard drive to work both on my wife's MacBook Pro and my PC. Any help would definitely be appreciated.

You may be going on a recollection, that I share, that at one time Apple stated this would be possible:
In fact, Apple’s Time Machine Web page touted this very capability as recently as last Tuesday, as you can see from Google’s October 16 cache of the page
Effortless meets wireless. With a hard disk connected to your AirPort Extreme Base Station, all the Macs in your house can use Time Machine to back up wirelessly. Simply select your AirPort Disk as the backup disk for each computer and the whole family can enjoy the benefits of Time Machine.
But if you look at the current Time Machine page on Apple’s Web site, that text is nowhere to be found.
That was a long time ago, it has never been officially implemented, and at present they specifically say it cannot be done.
In summary, it may work, but probably won't, and even if it does it may not be reliable.
Reference:
Disks that can be used with Time Machine
Time Machine can’t back up to an external disk connected to an AirPort Extreme, or...
and
Mac OS X v10.5: Time Machine doesn't back up to AirPort Extreme AirPort Disks

Problem using Time Machine with Seagate BackUp Plus Pls HELP!!

I have a late 2006 iMac (running OS 10.5.8) & am trying to back up using Time Machine with a new Seagate BackUp Plus drive. When I select the Seagate drive in Time Machine it tells me I msut first erase the (Seagate) disk. When I hit ERASE, I get a Time Machine error : COULD NOT UNMOUNT DISK. I see from various posts that 10,5 & 10,6 have issues with some external drives so want to upgrade to Mavericks (to get around this incompatibility issue): HOwever apparently my iMac is too old (by 1 year) to allow this. Can anyone give me any advice on how to get my iMac content backed up via Time Machine using the Seagate BackUP PLus drive I bought (becasue it is supposedly "compatible with PCs & Macs".
Thank you!!
Wendy

Your Seagate drive should work just fine. If it doesn't have any important data on it, try re-formatting it with Disk Utility to blank it out. Or run the Disk verify/repair and see if you can get it to fix any problems.
I have a Drobo FS too. You probably need a firmware update, they issued one a while back to fix problems with Time Machine. Use the Dashboard or download it from their support site, http://www.drobo.com/support/updates.php
Just curious how long you let it run after it "stalled". If it is a big file it could just be taking a while to copy over, do you see activity lights on the USB drive? The first time you use time machine let it run overnight, it's going to take a while, after that it will update quickly.
While you're at it, you might want to verify your start-up disk too with Disk Utility.

How do I transfer from time machine lightroom programme to my girlfriends computer (backed up on time machine) with out setting up my full desktop - i need it until i can afford a new computer to restore my old set up completely.

How do I transfer from time machine adobe lightroom programme to my girlfriends computer (backed up on my hard drive via time machine) with out setting up my full desktop - i need it until i can afford a new computer to restore my old set up completely.
Any ideas, I can access files - i.e. jpegs of old work, but can't edit new photos...
P

If you have a license for Lightroom, you should be able to reinstall it from an installer disc or re-download it from Adobe after explaining the situation and clarifying the license issues. Either will be simpler than trying to extract and install it from a TM backup of a different Mac, I think. If it's anything like other Adobe products, it has bits and pieces all over the place that you'll have to find and put in their right places on your girlfirend's Mac.

Time Machine with Synology

Similar Messages

Maybe you are looking for