Time Machine won't back up incrementally

Hi there,
Here's my situation. Using a Mac Pro, Snow Leopard 10.6.8. (still SL because I have a solid FCP7 set up and don't want to mess with it at the moment).
I've used Time machine successfully with one large 6TB backup external hard drive. But recently, since I don't have enough space on that one drive to back up all my other drives, I decided to try to use a second backup that I would dedicate to backing up just one large drive with lots of large media files. So I backed up eveything else on original backup1 except that drive....then connected the other backup2...chose that as my backup disc in TM, excluded all other drives (including my system hard drive) and let it fly. It seemed to work, but now when I try to use backup2 to incrementally backup it wants to backup that WHOLE drive again and says "there's not enough space on the backup drive", so it won't proceed. When I look on the backup2, I do see the backup folders, and the files are in there...I just hope to do an easy incremental backup of this drive from time to time.
I tried some recommend troubleshooting and deleted the com.apple.TimeMachine.plist file...but after restarting, rechoosing that drive as the backup drive, excluding the others, it still won't incrementally back up the drive that I needed to be backed up. Still says, "Not enough space".
Now, I'm not sure if switching between drives is even possible..seems like it should be. You'd think many people would have this problem of their backup drive not being big enough to handle everything and want to split it up ( i understand Mavericks makes this easier). But I really can't update the OS at the moment and am looking for solutions or ideas as to how to work this out. Any ideas would be greatly appreciated, even a third party backup recommendation if necessary.
scott

Time Machine, especially the version on Snow Leopard, isn't made for splitting backup duties across volumes. Even on Mountain Lion, where you can use multiple target drives, they each back up the entire group of source drives. I haven't tried Mavericks yet, but I understand it is similar to Mountain Lion in this respect.
You could use Time Machine to back up everything but your large media file drive into the 6TB drive and use another utility to back up the large media drive onto another external volume. Carbon Copy Cloner, for example, has an incremental backup mode.

Similar Messages

Time MAchine won't back up due to not enough space, but there is

TIme Machine won't back up. Displays this:
Actual capacity of the external backup drive is 999.68 GB and available is 135 gb .
The imac internal HD capacity is 999.01GB and used space is 636.321 GB.
This problem has occured periodically in the last 12 months or so, so prior to OS version10.8 install in Jul 2012.
I previously called AppleCare, as I have a contract, and tech said I just need to reformat the external drive and start over.
I did that the last time this happened a few months ago, but I don't like that option, as it eliminates all the prior backups,
What if I needed to try to recover something I deleted 3 weeks ago, for example. I couldn't do so as all backups would have been deleted, of course, by me having refomatted the drive and basically starting over. Also, I noted in another post about a person having a problem due to using a partitioned drive. Mine is not partition, as far as I can tell. See this:
Any ideas? Thanks

The solution is essentially "simple." You need a larger hard drive for these backups or you need to use a different backup solution. By this I mean using backup software that does not preserve an archive of old copies of a file, but simply erases old copies in order to replace them with the new copies. By replacing your backup drive can always accommodate the drive it backs up if it is large enough - say the same size. I can suggest:
Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
All of the above are capable of being scheduled. Synk Pro makes immediate backups of any changed file on the hard drive. You may configure it to archive changes (like Time Machine) or to delete prior copies.

Time Machine won't back up after system restore

I just restored my system after a failure, and now Time Machine won't back up my hard drive. It gets about 40 out of 90 Gigabytes done, and then gives me an error message that just says that there was an error while backing up, and doesn't give any other information. I ran a Verify Disk with Disk Utility, and there is nothing wrong with the backup drive, and there is more than 200 Gigabytes of space left on that drive.
Thank You.

zhoffmanster wrote:
Ok, so here's the thing: I tried backing up again today, and it worked just fine. Before, what would happen is a message would pop saying "an error has occurred during backup" (or something close to that). The point is, the message didn't give any detail.
No, the point is, you seem to have ignored this:
See the Time Machine - Troubleshooting post at the top of this forum.

Time Machine won't back up external drive to Time Capsule

I recently got a Time Capsule, and successfully set it up to back up my iMac's primary drive, but for some reason Time Machine won't back up my external drive to the Time Capsule.
I removed the external drive from the exclusion list in System Preferences > Time Machine > Options, and from what I've read this should be sufficient to make Time Machine back up the drive.
The external drive is connected to my iMac via Thunderbolt > Thunderbolt-to-Firewire adaptor > Firewire 800 input, and the Time Capsule is connected via Ethernet to my LAN.
Since I'm using Ethernet, I've disabled Wi-Fi on the Time Capusule by going to AirPort Utility > My Time Capsule > Edit > Wireless > Network Mode > Off.
The reason I believe the external drive is not being backed up is because when I click the Time Machine icon in the upper-right status bar and choose "Enter Time Machine", none of the folders on external drive show any older versions.
Furthermore, when I click Finder > Time Machine Backups > Backups.backupdb, I can see only one sub-folder which has the name of my iMac's primary drive. I can't see any equivalent folder for my external drive.
Any idea what I'm doing wrong?

I don't see anything you have done wrong.. perhaps it does backup in a different way.
Load the widget.. A1 here... http://pondini.org/TM/Troubleshooting.html
That will allow you to track the log of TM to see what it is doing.
I would also try rebooting the computer.. exclude the drive again.. reboot.. and remove the exclusion.
You should be able to check the actual settings of TM in plist file.
And you can do a full reset of TM as well.. See A4. Check what is in the file. Pondini lists the location for you.
Nothing surprises me with Mountain Lion ...!!

My Time machine won't back up. Recently updated to OS x 10.7.5. Error message is as follows: "The backup disk image "/Volumes/Time Machine Backup/Scott's MacBook Pro.sparsebundle" is already in use." What is wrong and how do I fix it? Thanks.

My Time machine won't back up. Recently updated to OS x 10.7.5. Error message is as follows: "The backup disk image “/Volumes/Time Machine Backup/Scott’s MacBook Pro.sparsebundle” is already in use." What is wrong and how do I fix it? Thanks.

Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use

After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use

Standard problem in ML.. apple do not seem to want to recognise.
Reboot the TC .. if that fails restart the whole network in correct order.. modem.. router/TC... clients.. with 2min gap.
There are other suggestions like changing the password.. all they do is the same as reboot.
Read C12.. most quoted Q in pondini website history. This is asked 10 times a day.
http://pondini.org/TM/FAQ.html
Here is another way to get a useful utility in ML.. rather than toyland version.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

Time Machine won't back up onto Time Capsule

I upgraded to Mountain Lion last week, and Time Machine won't back up to my Time Capsule. When it fails, I get the message:
Time Machine couldn't complete the backup to "Tom's Time Capsule".
The backup disk image "/Volumes/Data/TomsMac.sparsebundle" could not be created (error 60)
I sometimes get the same message, but with "error 17"
I also get the following error message popup (even though the disk is the one in my Time Capsule):
The disk you inserted was not readable by this computer.
The popup offers three choices: Initialize, Ignore, Eject.
My local Apple Store Genius concluded that the problem must be with the Time Capsule, so I bought a new one. That didn't fix the problem.
Time Machine Buddy messages:
Starting manual backup
Attempting to mount network destination URL: afp://Tom%[email protected]/Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://Tom%[email protected]/Data
Creating disk image /Volumes/Data/TomsMac.sparsebundle
Error 60 creating backup disk image
Failed to create disk image /Volumes/Data/TomsMac.sparsebundle, status: 60
Backup failed with error: 20
Failed to eject volume /Volumes/Data (FSVolumeRefNum: -108; status: -47; dissenting pid: 0)
I did Repair Disk Permissions and Verify Disk and everything's OK.
I erased the Time Capsule using AirPort Utility and did a hard reset on the Time Capsule.
I did a re-install of Mountain Lion and that didn't fix anything.
My MacBook Pro is accessing the Time Capsule wirelessly, as it always has.
Help!

Just to be sure, we're talking about a Time Capsule -- not an AirPort Extreme connected to an external hard drive. Right?
If so, proceed as follows.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Time Machine won't back-up. Why?

Time Machine won't back-up to LaCie external drive (OS 10.7.4) after I disconnected and reconnected for a road trip.
Why? How can I correct?

What is the error message?

Time Machine won't back up to drive. Five days backing up so far

A week ago I got a message saying that Time Machine could not back up to my external hard drive but that I could access my old backups. I pointed Time Machine to another hard drive and it has been backing up there for five days so far - all the time stating Time remaining 5 seconds. It is now in a cleanup mode. I have been reading about various bugs concerning Time Machine and wonder if there is a fix I can carry out so that I can use the original external hard drive again.

Stop the backup. Boot in safe mode and log in. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Time Machine Won't Back up Completely

When I insert an external drive, Time Machine does not back up my whole computer. It only backs up around 4 GBs. Any solutions/tips on why that is the case? It is a brand new hard drive

jcwong15 wrote:
Actually, the issue is my "Untitled" hard drive is on the excluded list.
I somehow thought it was normal to have the hard drive there, and anything else that isn't there should be deleted. I can't remove my hard drive from the excluded list though.
What happens when you try to remove it?
If it's listed in gray, and you can't remove it, that means it's not formatted for a Mac (any variant of Mac OS Extended) and Time Machine can't back it up.
If so, you must have an SSD with OSX on it (since OSX won't install or run on a drive like that).
Even so, the system folders (Applications, Library, and System) alone on your OSX drive should add-up to at least 14 GBs.
Let's see just what's what. Start the Disk Utility app (Applications/Utilities) and screenprint the display. For each partition (indented) with a gray icon, select it and screen print that, too. Then post them all here.

Time machine won't back up anymore after it failed? HELP!!

Hey all,
My time machine used to back up to my hard drive fine, but after it had a fault half way through a back up, i think the cable was disconnected it won't back up or start a back up again. I've looked at the help and it actually has my hard drive in the "Don't back up" section, when i select it to remove it from that it won't let me remove it.....
Really need to back up and no idea how to get this done...
HELP

Open up Disk Utility and Verify your external had drive. It sounds as though there could be some damage from when it was unplugged in the middle of writing, which is preventing Time Machine from working properly.
Try to get Disk Utility to repair the drive if it finds any errors.
If this does not work the most likely thing is that the Disk Image being written to by Time Machine is perpetually locked. In that case, it might be worth deleting the back-ups (since they are unusable now anyway) and starting a new time machine backup from scratch.

Time Machine won't back up OWC external drive

Mac Mini running 10.8.5. Time Machine will not back up brand new OWC MiniStack external HD. I've trashed TM prefs, reformatted the TM drive, verified that there are no exclusions, but it won't back up the external HD which contains only data files -- no system, no applications. TM does back up the internal HD.

PROBLEM SOLVED.
Recap: Time Machine would not back up an external data drive despite being correctly formatted and settings correctly applied.
Problem was either: a) the Mac, b) the external data drive, c) the Time Machine drive, or d) the data.
I replaced both the external data drive (cloned) and the Time Machine drive, but Time Machine would back up that external drive either.
Finally, instead of CLONING (SuperDuper) the external data drive, I COPIED the data to a new HD -- root folder-by-folder. Now Time Machine again backs up my external hard drive.
SOLUTION: Problem was not hard drives or Mac, but within the data itself. Cloning the data simply passed on the problem to the new hard drive. For this problem, the solution was copying the data rather than cloning.
Thanks all.

Time machine won't back up

I just got a new MacBook Air with Lion. On my old Mac, I thought I remembered that Time Machine would only backup files that have changed since the last time I backed up my drive. I used Time Machine to transfer my old desktop to my new Air. Today when I tried to use TIme Machine to back it up, it said I did not have enough space.
I'm not clear if it's trying to back up the whole drive or just things that have changed since the install (which is all I need).
What should I do to make more room for my current back up or to instruct Time Machine only to back up items that have changed since the last backup?
Thanks.

FWIW I had this sort of problem which generally #$%^& me off. I had a brainstorm and tried somebody's MBP and it worked just as expected. So I reinstalled Leopard after erasing and formating the drive and using time machine off my external LaCie.
That didn't work worth a #$%^&
So I once again, reformatted the drive and reinstalled leopard FROM THE DVD and then used time machine as part of the migration assistant, and everything worked perfectly, and I can now use TC with my Mac Pro octo.
So something MIGHT be hosed on your system, and if you feel that you have a solid back up, reinstall off the DVD and then migrate with time machine.
Hope this helps. I spent about 2 days getting this straightened out.

I upgraded to Mavericks and now Time Machine won't back up to my external hard drive.

I upgraded to OS 10.9 on my iMac and now I get messages that Time Machine will not back up to my G-Force external hard drive. What do I do to restore back up capability?

Check the More Like This section at the right particularly i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

Pondini, I beseech thee....Time Machine won't back up external drive partitions

Pondini (or anyone else that would like to help),
I am running Mac OS X 10.7.5. At my edit bay, we utilize a Facilis Terrablock 24D for storage, which connects to our system via fibre cables. Before upgrading to 10.7.5, Time Machine would back up all of our drive partitions on the Terrablock. Since the upgrade, Time Machine still recognizes the drives, we can add or subtract files from the drives, and it appears to make and save the changes, but when Time Machine backs up, it will only back up the local hard drive. No error messages come up. It just does its thing but only for the local HD.
All of the drive partitions are Mac OS Extended Journaled. All of the permissions seem to be in order.
I have contacted Facilis and their technical support claims that they never tested their products with Time Machine (as they sell their own backup equipment) but in theory that it should work.
I'm not sure what other information you might need but please let me know and I'll do my best. I was wondering if anyone else has come across an issue like this? Thank you for your time.

LALB wrote:
Upon including this partition and all of its contents, it disappears from the exclusion list as it should AND its size is reflected in the Estimated size of full backup. But this is the kicker! Upon clicking "Save" and starting Time Machine's backup, I receive the error "Time Machine could not complete the backup. There are no disks available to be backed up." Upon going back into TM Preferences > Options, I find that the external drive / partition has been put back on the Exclusion list. It's like it is automatically rejecting the partition after I have saved my exclusion list.
That's quite strange.
TM does that if you try to back up a USB Thumb drive (I've filed a bug report), but this is the first I've heard of it under any other circumstances. Then again, I don't recall a post by anyone trying to back up from a drive connected this way.
If a drive isn't formatted for a Mac (ie, FAT32, ExFat, NTFS, etc), Time Machine cannot back it up, and will list it in gray on the exclusion list (same as the backup drive), and won't let you remove it from the list, so it's clear.
This sounds like a "cousin" of the way it treats a thumb drive, so sure seems like a bug. TM will back up USB, FireWire, and Thunderbolt drives without a problem, if they're formatted right.
If you have any Macs under 90 days old, or covered by AppleCare, a call to them is free, and the best way to get a quick answer (you may have to escalate to a "specialist" however, and it still may take a few days for something unusual). Otherwise it's $50 U.S.
An alternative is to file a Bug Report, per the green box in Reporting a Problem to Apple. That most likely won't get a response for quite a while, though.
Sorry, wish I had a fix!
Let us know what, if anything, you find out.

Time Machine won't back up incrementally

Similar Messages

Maybe you are looking for