Time Machine won't back-up particular folder

I recently reformatted my Drobo and did a complete, new backup with Time Machine. I had been using this combo for awhile and never had any problems that I was aware of. After 30 hours of backing up 1.3TB of data into a 2.4TB space, it was stuck at 1.15TB and the entire computer went unresponsive. I had to perform a forced shutdown. After rebooting Drobo Dashboard indicated that 1.04TB of data had been backed up, I launched Time Machine and it operated perfectly backing up all remaining data. I then created a new folder of jpg images, about 100MB total, and no subsequent backup has included this folder of images. I have done nothing to exclude this folder, in fact I've done nothing with Time Machine other than initiating a couple of backups and then entering Time Machine to verify whether or not the folder was included in the backup. Any idea why it isn't including this folder in any backup? Thanks.

quicklook the file /library/preferences/com.apple.timemachine.plist. make sure it's not listed among any exclusions there. some of things listed in that files don't show up in the exclusion list. if it's there then delete that file and set up TM and the exclusion list from scratch.

Similar Messages

  • Time Machine won't back up external drive to Time Capsule

    I recently got a Time Capsule, and successfully set it up to back up my iMac's primary drive, but for some reason Time Machine won't back up my external drive to the Time Capsule.
    I removed the external drive from the exclusion list in System Preferences > Time Machine > Options, and from what I've read this should be sufficient to make Time Machine back up the drive.
    The external drive is connected to my iMac via Thunderbolt > Thunderbolt-to-Firewire adaptor > Firewire 800 input, and the Time Capsule is connected via Ethernet to my LAN.
    Since I'm using Ethernet, I've disabled Wi-Fi on the Time Capusule by going to AirPort Utility > My Time Capsule > Edit > Wireless > Network Mode > Off.
    The reason I believe the external drive is not being backed up is because when I click the Time Machine icon in the upper-right status bar and choose "Enter Time Machine", none of the folders on external drive show any older versions.
    Furthermore, when I click Finder > Time Machine Backups > Backups.backupdb, I can see only one sub-folder which has the name of my iMac's primary drive. I can't see any equivalent folder for my external drive.
    Any idea what I'm doing wrong?

    I don't see anything you have done wrong.. perhaps it does backup in a different way.
    Load the widget.. A1 here... http://pondini.org/TM/Troubleshooting.html
    That will allow you to track the log of TM to see what it is doing.
    I would also try rebooting the computer.. exclude the drive again.. reboot.. and remove the exclusion.
    You should be able to check the actual settings of TM in plist file.
    And you can do a full reset of TM as well.. See A4. Check what is in the file. Pondini lists the location for you.
    Nothing surprises me with Mountain Lion ...!!

  • Time MAchine won't back up due to not enough space, but there is

    TIme Machine won't back up. Displays this:
    Actual capacity of the external backup drive is 999.68 GB and available is 135 gb .
    The imac internal HD capacity is 999.01GB and used space is 636.321 GB.
    This problem has occured periodically in the last 12 months or so, so prior to OS version10.8 install in Jul 2012.
    I previously called AppleCare, as I have a contract, and tech said I just need to reformat the external drive and start over.
    I did that the last time this happened a few months ago, but I don't like that option, as it eliminates all the prior backups,
    What if I needed to try to recover something I deleted 3 weeks ago, for example.  I couldn't do so as all backups would have been deleted, of course, by me having refomatted the drive and basically starting over.  Also, I noted in another post about a person having a problem due to using a partitioned drive.  Mine is not partition, as far as I can tell.  See this:
    Any ideas?  Thanks

    The solution is essentially "simple." You need a larger hard drive for these backups or you need to use a different backup solution. By this I mean using backup software that does not preserve an archive of old copies of a file, but simply erases old copies in order to replace them with the new copies. By replacing your backup drive can always accommodate the drive it backs up if it is large enough - say the same size. I can suggest:
    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    Synk Pro
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    All of the above are capable of being scheduled. Synk Pro makes immediate backups of any changed file on the hard drive. You may configure it to archive changes (like Time Machine) or to delete prior copies.

  • Time Machine won't back up after system restore

    I just restored my system after a failure, and now Time Machine won't back up my hard drive. It gets about 40 out of 90 Gigabytes done, and then gives me an error message that just says that there was an error while backing up, and doesn't give any other information. I ran a Verify Disk with Disk Utility, and there is nothing wrong with the backup drive, and there is more than 200 Gigabytes of space left on that drive.
    Thank You.

    zhoffmanster wrote:
    Ok, so here's the thing: I tried backing up again today, and it worked just fine. Before, what would happen is a message would pop saying "an error has occurred during backup" (or something close to that). The point is, the message didn't give any detail.
    No, the point is, you seem to have ignored this:
    See the Time Machine - Troubleshooting post at the top of this forum.

  • My Time machine won't back up.  Recently updated to OS x 10.7.5.  Error message is as follows:  "The backup disk image "/Volumes/Time Machine Backup/Scott's MacBook Pro.sparsebundle" is already in use."  What is wrong and how do I fix it?  Thanks.

    My Time machine won't back up.  Recently updated to OS x 10.7.5.  Error message is as follows:  "The backup disk image “/Volumes/Time Machine Backup/Scott’s MacBook Pro.sparsebundle” is already in use."  What is wrong and how do I fix it?  Thanks.

    Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

  • After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use

    After installing Mountain Lion, my Time Machine won't back up ... says the sparsebundle is in use

    Standard problem in ML.. apple do not seem to want to recognise.
    Reboot the TC .. if that fails restart the whole network in correct order.. modem.. router/TC... clients.. with 2min gap.
    There are other suggestions like changing the password.. all they do is the same as reboot.
    Read C12.. most quoted Q in pondini website history. This is asked 10 times a day.
    http://pondini.org/TM/FAQ.html
    Here is another way to get a useful utility in ML.. rather than toyland version.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • Time Machine won't back up onto Time Capsule

    I upgraded to Mountain Lion last week, and Time Machine won't back up to my Time Capsule. When it fails, I get the message:
    Time Machine couldn't complete the backup to "Tom's Time Capsule".
    The backup disk image "/Volumes/Data/TomsMac.sparsebundle" could not be created (error 60)
    I sometimes get the same message, but with "error 17"
    I also get the following error message popup (even though the disk is the one in my Time Capsule):
    The disk you inserted was not readable by this computer.
    The popup offers three choices: Initialize, Ignore, Eject.
    My local Apple Store Genius concluded that the problem must be with the Time Capsule, so I bought a new one. That didn't fix the problem.
    Time Machine Buddy messages:
    Starting manual backup
    Attempting to mount network destination URL: afp://Tom%[email protected]/Data
    Mounted network destination at mount point: /Volumes/Data using URL: afp://Tom%[email protected]/Data
    Creating disk image /Volumes/Data/TomsMac.sparsebundle
    Error 60 creating backup disk image
    Failed to create disk image /Volumes/Data/TomsMac.sparsebundle, status: 60
    Backup failed with error: 20
    Failed to eject volume /Volumes/Data (FSVolumeRefNum: -108; status: -47; dissenting pid: 0)
    I did Repair Disk Permissions and Verify Disk and everything's OK.
    I erased the Time Capsule using AirPort Utility and did a hard reset on the Time Capsule.
    I did a re-install of Mountain Lion and that didn't fix anything.
    My MacBook Pro is accessing the Time Capsule wirelessly, as it always has.
    Help!

    Just to be sure, we're talking about a Time Capsule -- not an AirPort Extreme connected to an external hard drive. Right?
    If so, proceed as follows.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Time Machine won't back-up. Why?

    Time Machine won't back-up to LaCie external drive (OS 10.7.4) after I disconnected and reconnected for a road trip.
    Why?  How can I correct?

    What is the error message?

  • Time Machine won't back up OWC external drive

    Mac Mini running 10.8.5.  Time Machine will not back up brand new OWC MiniStack external HD. I've trashed TM prefs, reformatted the TM drive, verified that there are no exclusions, but it won't back up the external HD which contains only data files -- no system, no applications.  TM does back up the internal HD.

    PROBLEM SOLVED.
    Recap: Time Machine would not back up an external data drive despite being correctly formatted and settings correctly applied.
    Problem was either:  a) the Mac, b) the external data drive, c) the Time Machine drive, or d) the data.
    I replaced both the external data drive (cloned) and the Time Machine drive, but Time Machine would back up that external drive either.
    Finally, instead of CLONING (SuperDuper) the external data drive, I COPIED the data to a new HD -- root folder-by-folder. Now Time Machine again backs up my external hard drive.
    SOLUTION:  Problem was not hard drives or Mac, but within the data itself.  Cloning the data simply passed on the problem to the new hard drive.  For this problem, the solution was copying the data rather than cloning.
    Thanks all.

  • Time Machine won't back up to drive.  Five days backing up so far

    A week ago I got a message saying that Time Machine could not back up to my external hard drive but that I could access my old backups. I pointed Time Machine to another hard drive and it has been backing up there for five days so far - all the time stating Time remaining 5 seconds.  It is now in a cleanup mode. I have been reading about various bugs concerning Time Machine and wonder if there is a fix I can carry out so that I can use the original external hard drive again.

    Stop the backup. Boot in safe mode and log in. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I upgraded to Mavericks and now Time Machine won't back up to my external hard drive.

    I upgraded to OS 10.9 on my iMac and now I get messages that Time Machine will not back up to my G-Force external hard drive. What do I do to restore back up capability?

    Check the More Like This section at the right particularly i upgraded my imac hard drive to a 2tb drive. how do i use time machine to get my computer back to normal?

  • Can Anyone Tell Me Why Time Machine Won't Create A BackUp Folder for a Programed Backup?

    Does anyone know why my Time Machine is NOT creating a backup folder on and regular scheduled backup?  Just recently I downloaded the Time Machine Editor and it said to turn off the regular Time Machine (ON/OFF) switch, and just run off the TM Editor.  However, at 1am in the morning, it comes up with the error saying it can't create a Backup Folder.  I'm sure this is a simple solution but I really don't know how to handle this...  Would appreciate any and all help in this matter... Thanks, Gary

    Were you already backing up with Time Machine - ie, did you have an existing backup folder on the drive before you started using Time Machine Editor? If not, you probably need to do at least one full backup with TM, and then start using TME to schedule backups.
    Matt

  • Time Machine Won't Back up Completely

    When I insert an external drive, Time Machine does not back up my whole computer. It only backs up around 4 GBs. Any solutions/tips on why that is the case? It is a brand new hard drive

    jcwong15 wrote:
    Actually, the issue is my "Untitled" hard drive is on the excluded list.
    I somehow thought it was normal to have the hard drive there, and anything else that isn't there should be deleted. I can't remove my hard drive from the excluded list though.
    What happens when you try to remove it? 
    If it's listed in gray, and you can't remove it, that means it's not formatted for a Mac (any variant of Mac OS Extended) and Time Machine can't back it up.
    If so, you must have an SSD with OSX on it (since OSX won't install or run on a drive like that).
    Even so, the system folders (Applications, Library, and System) alone on your OSX drive should add-up to at least 14 GBs. 
    Let's see just what's what.  Start the Disk Utility app (Applications/Utilities) and screenprint the display.  For each partition (indented) with a gray icon, select it and screen print that, too.  Then post them all here.

  • Time machine won't back up anymore after it failed? HELP!!

    Hey all,
    My time machine used to back up to my hard drive fine, but after it had a fault half way through a back up, i think the cable was disconnected it won't back up or start a back up again. I've looked at the help and it actually has my hard drive in the "Don't back up" section, when i select it to remove it from that it won't let me remove it.....
    Really need to back up and no idea how to get this done...
    HELP

    Open up Disk Utility and Verify your external had drive. It sounds as though there could be some damage from when it was unplugged in the middle of writing, which is preventing Time Machine from working properly.
    Try to get Disk Utility to repair the drive if it finds any errors.
    If this does not work the most likely thing is that the Disk Image being written to by Time Machine is perpetually locked. In that case, it might be worth deleting the back-ups (since they are unusable now anyway) and starting a new time machine backup from scratch.

  • Time machine is not backing up the folder

    Just figure out the reason to cause lost of my photos after restore from Time Machine Backup:
    time machine is not backing up photos in iphoto/Originals folder
    Here is how I tested the problem, I don't know why TM stop doing backup folder
    1) Import some pictures from camera to iphoto library --> fine, I can view the new import in iphoto and also I can find the copy of imported file under iphoto Library/Originals (by Show package content)
    2) I manually ask TM to backup.
    3) After TM is done, I go to backup, all newly imported photos are missing in the TM backup which
    I just created 5 min ago.!!
    No matter what, Steve Jobs need to fix this bug!!! How many people lost their precious data
    because iphoto & TM???? I will go back to 3rd party software to manually import photos and
    manage photos.
    AND I think it is somehow must bug in the iphoto..........
    PLease reply if you have similar problem!

    icestone2010 wrote:
    Just figure out the reason to cause lost of my photos after restore from Time Machine Backup:
    time machine is not backing up photos in iphoto/Originals folder
    Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).
    If that doesn't help, repair your backups, per #A5 there.
    No matter what, Steve Jobs need to fix this bug!!!
    Be sure to call him and tell him that.

Maybe you are looking for

  • + Camera Raw Feature Requests +

    UPDATE: We're interested in what changes you would like see in our products. Do you have an idea for a feature that would help your workflow? Is there a small change that could be made to make your life a little easier? Let us know!  Share an Idea, A

  • SOAP Error in Profile Source

    I've written a profile service to import employee information from our HR system to populate user profiles. When I run the Profile Source Job, I'm getting this error: 4/14/04 13:16:48- The Profile Source encountered an error (0x80004005): CPTRAPProvi

  • How is it possible to run MSL with JDeveloper?

    Do I need a third party JDBC driver?

  • Safari/FireFox Preview Problem on iMac

    Running the latest Snow Leopard and Dreamweaver CS4 on iMac. Developing a site in PHP after installing XAMPP. Go to preview a page in both Safari and Firefox and all that shows up is the text and question marks where images are suppose to be. The ser

  • Installation of Java PlugIn 1.3.0

    because i want to run a self-signed applet without manually installation of the certificate i have to use PlugIn 1.3.0. i use internet explorer 5.5 on windows nt. when i put the link to the PlugIn 1.3.0 the browser couldn't interpret the object tag.