Time machine won't work with LaCie blade runner

I have a 2009 iMac and I just received my LaCie Blade Runner hard drive. I tried using it for time machine but it got to 2.46GB and then I just stop. I waited for an hour but nothing happened so I stopped it and tried again this time it got to 789.9MB and stopped. At this point I thought it might have been the formatting so I used disk utility to format it to journaled, encrypted and tried again, this time it only got to 11 bytes and within half an hour it said the estimated time of finishing was in 300,000 days, so I left it over night and by morning it got to 542.3MB.
I don't understand is there something wrong with the hard drive or the formatting or is it just a glitch in the program? Help me apple community, your my only hope.

Select the icon of the drive in Disk Utility (not the volume icon nested below it.) What is the partition type shown at the bottom of the window?

Similar Messages

HT201250 My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1

My 10.7.3 Time Machine won't work with external disks. Worked fine with Snow Leopard, and even Lion 10.7.1
I have tried everything, even buy new external disk from different manufacture.
If I cant get a fix soon, I am downgrading back to SnowL.

Still no luck. I tried all the tricks, reconfiguring TM (remove selected disk option, and re-setting it, and trying different disks). Tried new combo updater, and the newer TM update after that. Tired two different disks too (one is my older firewire WD MyBook 1TB, and my brand new 3tb Seagate GoFlex USB... either one plugged into back of computer - no intermediary devices). I did get the TM buddy wiget and it produced the following log, from the last attempt, where I setup lots of exclusions so that backup quantity was small (under 10gb). Still it failed to complete. Here is that log, for what it is worth:
Starting standard backup
Backing up to: /Volumes/TM-Disk/Backups.backupdb
9.56 GB required (including padding), 911.15 GB available
Waiting for index to be ready (101)
Copied 0 files (0 bytes) from volume Mac HD.
Backup canceled.
To prove a point, I will take these disks are run them on my other Tiger and Snow Leopard laptops to prove TM works fine on those with these disks. But I fear the only options are to either have my tech re-install LION... or just have him reinstall SL instead. Im at wits end.

Time Machine won't work with mountain lion

Since upgrading my MacBook to Mountain Lion the Time Machine back up does not work
The MacBook sees the TM and if I ask it to back up it "prepares the backup" but then after a while nothing happens. The last recorded back up is before the update.
We have an Apple Time Machine on our network and it's network cable enabbled and still works with our MacMini which has also been upgraded.
I have tried to create a new back up and that hasn't worked either.
My MacBook has been rebooted etc but still no success.
How can I get this to work again?

@Brian:
I think I have the same issue
https://discussions.apple.com/message/19083821#19083821
What's your MBP version?
Could you check if you still have a drop in your transmission speed? (as I shown in my thread)
thx

Time Machine won't work with Time Capsule

HI all
I have been using TM to backup to an Iomega portable drive but because the drive is relatively small and because I thought that having less wires around the place would be a good thing, I bought Time Capsule. However when I try to backup to TC I get one and/or two error messages. The first is that backup failed because TM couldn't create a directory. The second is that backup failed because TM couldn't write the files. When the first message occurs it's during the 'preparing backup' phase. The second happens with about 200mb copied.
Does anyone know why I would get this message using TC but not using the Iomega drive. I changed the disk in TM and it is backing up to the Iomega drive. However....there is an issue here too. When I go into TM and look for user files I can only see a 'shared' user file and not my own user file. This is making me believe that I'm not really backing up anything at all!
I called Apple and they suggest an archive and reinstall. As I don't have enough free space to do this I have to delete files (either iphoto or itunes). Until I checked the Iomega drive to ensure that all my files were on it I was happily prepared to do this. Now I'm not sure I can restore my files from the Iomega drive if I delete them from my Mac. I can, of course, just copy the itunes and iphoto folders to TC independently of the backup but I am very confused about the potential problems with TC and what the Iomega drive holds as a backup too.
So before I do anything I'd appreciate if people had any thoughts.
thanks
WG

You have made no mention of how Time Capsule is connected. For the initial backup, you should be connected using an ethernet connection. It would be a fresh, new backup. Did your setup of TC go smoothly? I assume the network is all setup and that the TC disk sharing is enabled.

Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me? Thanks a lot.

Hi there. just bought a TC, installation was succesfull, but time machine won't work. can't select Backup disk. get transferred to TC install again. Called Apple, 25 min. later no succes, have to call on monday again!!!! Can anyone help me? Thanks a lot.

See #Q1 in Using Time Machine with a Time Capsule.
If you have a problem, please tell us exactly what, and on which step there.

Time Machine doesn't work with Windows Server 2008

At work we use a Windows Server running with Windows Server 2008 to backup our work via Time Machine. All my collegues are running Snow Leopard appart from on that runs under Leopard because it's a G5.
A few weeks ago I installed Lion to try it before upgrading all the computer and found that time machine won't work. Apperantly I found that it is due to an AFP connection.
Can anyone tell me if I can do anything apart from trying to use another Backup Software like Data Backup?
Would really like to use Time Machine as it's SUPERB ;-)
Regards

Perhaps that drive is too small to use for Time Machine. Your Time Machine drive needs to be at least twice the size of the drive it is backing up, preferably 3 times.

Time Machine will NOT work with Airport Disks!

It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
http://www.apple.com/macosx/features/timemachine.html
It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
1) Mount your AirDisk so it appears on your Mac
2) Open Terminal.app
3) change directories to the AirDisk's root folder located in "/Volumes"
ie: cd "/Volumes/AirDisk Name"
4) execute this command to "bless" the drive to be used with time machine:
touch .com.apple.timemachine.supported
5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

Started using my Time Capsule as a base station; now Time Machine won't work

Dear community,
I had been using my Time Capsule just for Time Machine backups, but I recently switched to using it as an internet base station as well. Now I can connect to internet via Wi-Fi, but Time Machine no longer works (it throws a "backup disk cannot be found" error). I assume this is related to the fact that the name of my Wi-Fi network differs from the name that my Time Machine used to have back when it was only my backup disk. Does anyone have any ideas for how to get Time Machine working again, hopefully without losing all my backup history? Thanks for your help.
I am using a Time Capsule (circa 2012) and a late-2011 MacBook Pro with OS X 10.9.3.

This is just typical Mavericks behaviour.
You must find the hard disk for it. Poor Mavericks cannot find its own tail let alone a network device as complex as a hard disk.
Does anyone have any ideas for how to get Time Machine working again, hopefully without losing all my backup history?
Let me say, that killing your backups is harder than simple resets or changing functions. In fact the only way to wreck the backups is erase them deliberately from airport utility, or have TM working over a faulty link and corrupt them.
The issue is simply that the hard disk is lost. And Bo Peep doesn't know where to find it.
Step in and mount the hard disk manually.
In Finder.. use Go, Connect to server.
Type in AFP://TCname.local
Where TCname is the actual network name of the TC. (Hopefully you are now using short names with no spaces and pure alphanumeric.. in which case network name = name. If not then you need to translate the name to the network name.
So Fred Blog's Airport Time Capsule which you name it in the utility comes out.
fred_blogs_airport_time_capsule as network name. Spaces and apostrophe are illegal.
Let me encourage you to go back to the airport utility and rename the TC something sensible like TCgen4 (it is a gen4) and use TCwifi for the wireless name. Then the network name is at least something like the actual name.
So in my case I would type in AFP://TCgen4.local
Local is the default domain and using it can also help.
The caps are irrelevant.
The other and better way of doing it in Mavericks is use IP address of the TC if it is static. ie if the TC is main router it will have IP 10.0.1.1 by default.
Then you type AFP://10.0.1.1
You will be asked for the password.. type that in and keep it in your keychain.
(BTW you can discover the actual names of everything via the netstat scan from network utilities. In Mavericks Network Utilities has gone walkabout, so you will need to search for it in finder). You should see the actual network names of everything listed here. Along with MAC address and other info.
Now you can reset TM and point it at the TC disk which is already open in finder.
See info on TM reset here.
A4 http://pondini.org/TM/Troubleshooting.html
Please note when TM starts up it will show it is going to do a full backup.. this will not happen. It will discover the existing backup and then simply do incremental. (I hope!!) Nowadays with Mavericks nothing can be certain.
Good Luck.. !
Sorry I have made it over complicated.. Early morning here and not suitably caffeinated yet.
If you run into trouble post back.

Time Machine Won't Work - Using a BOOT DISK and separate DATA DISK Drives

Ok, so I'm up and running the my new MacPro.
I did a boot drive and then I did a 3 drive "Data Volume" RAID for increased performance and am getting about 235mb speeds on the "data" drive.
Everything is great... except... TIME MACHINE doesn't work. I'm a backup fanatic, so I have TIME MACHINE to save "versions" of my files, plus I use SUPER DUPER, DROBO's etc.
So, I've tried deleting the network preferences file in the library folder and restarting, but to no avail.
Basically, if I open TIME MACHINE PREFS, it says backup failed and I cannot "change" the drive. It's like the MAC doesn't see if through the TIME MACHINE PREFERENCES, but the Time Capsule Disk is "mounted" in the finder and I can copy files directly.
Anyone have any advice?
Thanks!

Open Airport Utility and check that you have the TC properly configured with the drive shared and file sharing enabled. The TC drive must mount on the Desktop. It should also be partitioned using GUID partition map and formatted Mac OS Extended, Journaled. You might consider using Airport Utility to erase the TC disk.
I believe the TC user manual should provide information on how to set up the TC to use with TM.

Time Machine no longer working with 10.5.5

Hello all,
I have a 500GB Time Capsule and my MacBook had previously backed up quite happily to it. Since installing 10.5.5, however, it just won't work. The disk image mounts, but Time Machine just hangs on "preparing for backup". I checked with Console, and this is what I found:
9/16/08 7:34:16 AM /System/Library/CoreServices/backupd[147] Backup requested by user
9/16/08 7:34:16 AM /System/Library/CoreServices/backupd[147] Starting standard backup
9/16/08 7:34:32 AM /System/Library/CoreServices/backupd[147] Network volume mounted at: /Volumes/Backups
9/16/08 7:34:39 AM /System/Library/CoreServices/backupd[147] Disk image /Volumes/Backups/Lappy 3000_0017f2328487.sparsebundle mounted at: /Volumes/Backup of Lappy 3000
9/16/08 7:34:39 AM /System/Library/CoreServices/backupd[147] Backing up to: /Volumes/Backup of Lappy 3000/Backups.backupdb
9/16/08 7:34:49 AM /System/Library/CoreServices/backupd[147] Event store UUIDs don't match for volume: Lappy 3000
9/16/08 7:34:55 AM /System/Library/CoreServices/backupd[147] Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonEventDBUntrustable|
What are "Event store UUIDs", and why would they not match up? I let it run for a few hours last night, but it didn't complete its task. I am going to let it run all day today to see if it manages to reconcile the problems and back things up, but does anyone have an idea what this is about?

Steve Holton wrote:
Adding a data point to what Glenn pointed out.
Last night it took 20 minutes to do the deep traversal then 12 minute to backup the updates. That's on relatively modest 55GB worth of data being backed up.
This is perfectly normal and the backup should NOT be interrupted.
If people are curious what is happening when TM backs up, then I suggest adding a wonderful little widget called "Time Machine Buddy" which will give you all the information you need as to what is going on during a TM backup (or failure).
You can find TM Buddy under Status in the Other Widgets directory on you Mac.

Time Machine no longer working with External Hard drive

Hello
I have an iMac 24 and an Iomega 500Gb drive. TimeMachine was working fine when I first set it up over Firewire. I then bought a MacBook and tried to use a the same drive to run separate Time Machine backups. I aborted it when I ran out of time as I was going away.
The iMac and the MacBook no longer recognise the Iomega drive as valid. I get an error about the drive being read only.
How can I resolve or reset this to get the iMac backups working? I'll probably buy a portable drive for the MacBook backups.
Thanks

mosey,
Unfortunately, your going to have to reformat the drive. There is no fix for the "Read Only" issue at this time.
*_How Should a Time Machine Hard Disk be Prepared?_*
For Time Machine to work properly, the hard disk must be formatted “Mac OS Extended (Journaled)” and its’ Partition Scheme should be either GUID or Apple Partition Map.
Time Machine is incompatible with disks partitioned as Master Boot Record (MBR). Unfortunately, this describes nearly every hard drive you can buy because MBR is a Windows partition scheme. (Naturally, this DOES NOT apply to Apples’ Time Capsule.)
For some, Time Machine begins to perform as expected with a new external hard disk. But then the initial full backup or subsequent incremental backups fail. The user only later discovers the hard disk was still partitioned as Master Boot Record (MBR).
One article on Time Machine made this observation: “Virtually everybody will have to open Disk Utility and repartition the disk as APM or GUID. It doesn't really matter which one because the Time Machine disk will not be bootable anyway. APM allows a disk to boot a PowerPC, GUID allows the disk to boot an Intel processor but both are easily digestible by Time Machine on either kind of processor.” [http://www.girr.org/mac_stuff/backups.html]
It’s been recommended by many here that your reserve at least double the size of your primary hard disk, that way Time Machine backups have room to grow as the size of your data grows. Additionally, the more space you give Time Machine the more history it can preserve. The less space you reserve for Time Machine the sooner older backups & deleted items will disappear.
Procedure
Connect the hard disk you wish to use for Time Machine backups.
Launch Disk Utility.
It will appear twice in the pane on the left. (Make sure you recognize that it is different from the 2 icons that represent your Macs' internal drive.) The upper entry represent the device as a whole, including the controller inside. The lower entry represents the hard disk contained within the device.
Click on the upper icon of the external hard disk.
Select the "Partition" tab.
For "Volume Scheme" choose "1 partition". (Chose 2 partitions if you intend on storing other data on the disk besides your Time Machine backups.)
Name the disk.
Format should be "Mac OS Extended (Journaled)".
Click "Options".
Select either GUID or Apple Partition Map. (See above for significance)
Click "OK".
Click "Apply".
Now chose the level of secure erase you desire. (More passes means more time)
Once the external hard disk is repartitioned, select it again in Time Machine preferences and use it for your backups.
Let us know if this was helpful.
Cheers!

Time machine no longer works with iLife

I try to open Time Machine with iPhoto, and it no longer works. Please fix this soon.

Sorry, but that option has been removed, for some reason: http://support.apple.com/kb/HT4754?viewlocale=en_US

Time Machine backups not working with Yosemite upgrade?

Time Machine backups "Waiting" with no data after Yosemite install?

But still not working.....Im getting some error message/info come up though that i never had come up before when running mavericks....I can't even insert a 2.9MB pic/image of pic i took of screen error msg...says 3.0MB Max??
Saying something about the disc couldn't be found.....but i have highlighted/encrypted back up disc selected...not "available discs".....back up disc is the one I've always backed up to....can anyone on here just help me with this please!!??
Thank you.

Flash, Adobe Air, Time Machine, Safari not working with Snow Leopard

Really need some help with this.
Did an archive and install of Leopard then installed Snow Leopard. No problems yet.
90% of Video sites would not work. Uninstalled and reinstalled Flash. Uninstalled ShockWave, could not reinstall with 10.6.1.
Attempt to install adobe air, received this message: "couldn't write the application to hard drive - please verify and try again." performed verify disk, disk permissions, repair permissions all ok.
Attempted to install Air again, same message.
Tried to use Time Machine to open Safari from a week ago, received message: I did not have permission.
Using Macbook Pro, 2g memory, 80g hd, with 42g free.
Backed up on ext. HD,
Oh, one more, getting a lot of spinning wheels when using Safari that causes a lockup and hard re-start.
I have an expensive piece of software that uses adobe air and I create videos for my business and I'm not able to do so now.
Can anyone give me any ideas what I can do.
Thanks,
Z

After a couple of days of problems with Snow Leopard and flash, safari etc... I figured out the problem is with my account.
I created a new admin account and everything seems to be working. Well almost.
a couple of things I've noticed are right clicking on dock icons does nothing, no option to quit or keep in dock.
Apple Techs', had me change my account months ago to fix a problem with safari crashing. It didn't really work and more problems resulted.
*So now my big question is: How do I move need items over to the new account.* I don't want to move everything over as I might bring what caused the problem in the first place.
What I need are several apps,(like ilife, iwork, firefox, devonthink, 1password etc.) downloads, desktop, docs, files, and book marks.
*What is the best way for me to do this?* Is there anything I need to do re: Snow Leopard on the new account?
I feel like I have a new and functioning Mac again just around the corner.
Looking for your help, thanks,
Z

Time Machine Won't Work after Maverick Upgrade

Hi,
I updated my operating system to Maverick the other day.
Today I tried to restore a file from Time Machine, but when I "Enter Time Machine" none of the functions seems to work.
I tried to press pretty much every date, and every button, but nothing works.
Any suggestions on what to do short of restoring to the old ios?
Thanks.

Others here wouldnt recommend it, but on a new OS install, since I have a giant pile of HD, ...i just grab another HD and create a new fresh Time Machine backup
after its complete, I take the original HD with the OLD backup and format/erase it.
Im a tad too lazy to wait, as you yourself mentioned, 1 hour for TM just to PREPARE to backup. Nope, no,...not gonna do it.
I updated 4 Macs to Mavericks and id rather make a wholly NEW Time Machine backup on another HD and erase the original.
Since I keep about 12+ redundant archives of my important data, I have no worry on earth of ever losing data.
Time machine is a backup, NOT an archive for vital data.
Methodology to protect your data. Backups vs. Archives. Long-term data protection

Time machine won't work with LaCie blade runner

Similar Messages

Maybe you are looking for