Time Maghine Error
For several months Time Machine has worked properly. Yesterday my backups began failing with the message:
"Time Machine Error
Unable to complete backup. An error occurred while
creating the backup directory"
I saw that there were many entries in these discussions about this problem. I followed the advice to start a manual backup, but this did not work.
Since the failures began happening on the day that I installed VirusBarrier X5, I looked in the logs and found that VirusBarrier X5 does a scan of the Time Capsule when it comes online just before a backup. I decided to disable the real-time scan function of VirusBarrier X5 and do a manual Time Machine backup. The backup ran OK.
This seems to be a useful work-around the problem, but now I have no virus scanning for incoming documents. Anyone know of a more permanent fix for this kind of problem?
TumbleFoot wrote:
For several months Time Machine has worked properly. Yesterday my backups began failing with the message:
"Time Machine Error
Unable to complete backup. An error occurred while
creating the backup directory"
I saw that there were many entries in these discussions about this problem. I followed the advice to start a manual backup, but this did not work.
Since the failures began happening on the day that I installed VirusBarrier X5, I looked in the logs and found that VirusBarrier X5 does a scan of the Time Capsule when it comes online just before a backup. I decided to disable the real-time scan function of VirusBarrier X5 and do a manual Time Machine backup. The backup ran OK.
This seems to be a useful work-around the problem, but now I have no virus scanning for incoming documents. Anyone know of a more permanent fix for this kind of problem?
Welcome to the Apple boards:
Remove the antivirus program. It will only be trouble.
AV programs are not needed on Macs and as you found out, most of them don't work properly.
If you feel the need to keep the elephants out of the room, so to speak, I recommend ClamAV
http://www.clamav.net/
I have been using Macs for years and have never used an AV program and have never seen an elephant
Similar Messages
-
Getting time out error when running the assigned verification in DRM 9.3.2.
Hi,
I have installed DRM 9.3.2.0.0 in my system (windows 7), when i am trying to run assigned verifications i am getting the time out error within a minute.
As suggested by oracle,I have added DWORD with value 480000 under Master Data Management in Registry editor. But still getting the error.
Please suggest a solution for this issue.
regards,
sathiyaPlease suggest me the solution.
regards,
sathiya -
Time out error 1.6 million internal table fields are computed using FMs
Hi , All ...
The Report running fine in server with less 300 record but ...production server which has 1.6 million record it gives error as time-out error and takes hell amount of time.
Please suggest ugently ..
I have tried few things
Internal table having 1.6 lacs ... fields to compute .. i have token in a batch
loop at i_cinfo into s_cinfo from 1 to 100000.
and so on ...also applied all the performace related .. like indexs, work areas , deleting adjacent duplicates , for all entries ..wherever applicable.
Please Suggest .
Report is as below
REPORT ZUSOTCBD_CREDIT_REPORT .
TABLES : KNA1, " General Data Customer Master
KNB1, " Customer Master (Company Code)
KNC1, " Customer master (transaction figures)
KNKK, " Customer master credit management: Control area data
T009, " Fiscal Year Variants P
T009Y, " Shortened fiscal years in Asset Accounting P
T001, " Co. Codes
T001CM, " Permitted Credit Control Areas per Company Code
RF42B, " Structure to hold credit data.
RF035, " Structure to hold credit managment fields
RF02L, " Structure to hold credit data.
TRAS, " Interval for Days in Arrears P
T000CM. " Data for DSO calculation.
Types
TYPES:
BEGIN OF type_final,
string(50) TYPE c, " String Value for Title
END OF type_final.
data:wa_final TYPE type_final. " Work Area to hold Title Data
DATA: RASID TYPE RF035-RASID value 'R03N'. " For Days in interval
DATA: MONAT(2) TYPE N.
DATA: GJAHR TYPE KNC1-GJAHR.
DATA: LD_PERIODS(32) TYPE N
VALUE '01020304050607080910111213141516'.
DATA sytabix type sy-tabix.
DATA LAND TYPE KNA1-LAND1 VALUE 'US'. " Country Key
DATA: LD_PERIOD TYPE BSID-MONAT, " Fiscal Year Variant
LD_GJAHR TYPE KNC1-GJAHR,
LD_COUNTER TYPE SY-TABIX.
Internal Tables
Internal table to hold Title Data *
DATA:
i_final TYPE STANDARD TABLE OF type_final.
**Internal Table Permitted Credit Control Areas per Company Code
DATA: BEGIN OF TCMTAB OCCURS 10.
INCLUDE STRUCTURE T001CM.
DATA: END OF TCMTAB.
*Internal table to store Customer no.
DATA : BEGIN OF ICUST OCCURS 0,
KUNNR TYPE KNA1-KUNNR, " Customer No.
END OF ICUST.
DATA: BEGIN OF BUKTAB OCCURS 20,
KKBER LIKE T001-KKBER, " Credit Control Area
BUKRS LIKE T001-BUKRS, " Co. Code
WAERS LIKE T001-WAERS, " Currency
PERIV LIKE T001-PERIV, " Fiscal Year Variant
BUTXT LIKE T001-BUTXT,
END OF BUKTAB.
Internal Table to store Fiscal year Data .
DATA: BEGIN OF GJATAB OCCURS 5,
PERIV LIKE T001-PERIV, " Fiscal Year Variant
GJAHR LIKE KNC1-GJAHR, " Fiscal Year
MONAT LIKE T009-ANZBP, "
ANZBP LIKE T009-ANZBP, " Number of posting periods
END OF GJATAB.
*Main Output internal table to be used to store credit history Information
DATA : BEGIN OF I_CINFO occurs 0,
KUNNR TYPE KNB1-KUNNR, " Customer
KNKLI TYPE KNKK-KNKLI, " Customer's account number with credit limit reference
KKBER TYPE KNKK-KKBER, " Credit Control Area
CTLPC TYPE KNKK-CTLPC, " Risk Category
KLIMK TYPE KNKK-KLIMK, " Credit Limit
SBGRP TYPE KNKK-SBGRP, " Credit representative group for credit management
ERDAT TYPE KNKK-ERDAT, " Created On
DTREV TYPE KNKK-DTREV, " Last Internal Review
REVDB TYPE KNKK-REVDB, " Last External Review
SALDO TYPE RF42B-SALDO, " Balance
DSOIN TYPE RF02L-DSOIN, " DSO
H06SA TYPE RF035-H06SA, " Highest Balance at the end of 6 Months
H06JA TYPE RF035-H06JA, " Year highest Balance 6 Months
H06MO TYPE RF035-H06MO, " Month OF hihest Balance 6 Months
H12SA TYPE RF035-H12SA, " Highest Balance at the end of 12 Months
H12JA TYPE RF035-H12JA, " Year highest Balance 12 Months
H12MO TYPE RF035-H12MO, " Month OF hihest Balance 12 Months
UMP2U TYPE RF42B-UMP2U, " Sales from the current Year
UMP1U TYPE RF42B-UMP1U, " Sales from the Previous Year
SFAEL TYPE RF035-SFAEL, " Total Past Due Open Item
SFAE1 TYPE RF035-SFAE1, " Aging buckets 0-15
SFAE2 TYPE RF035-SFAE2, " Aging buckets 16-30
SFAE3 TYPE RF035-SFAE3, " Aging buckets 31-60
SFAE4 TYPE RF035-SFAE4, " Aging buckets 60-90
SFAE5 TYPE RF035-SFAE5, " Aging buckets Over 90
END Of I_CINFO.
DATA : BEGIN OF S_CINFO ,
KUNNR TYPE KNB1-KUNNR, " Customer
KNKLI TYPE KNKK-KNKLI, " Customer's account number with credit limit reference
KKBER TYPE KNKK-KKBER, " Credit Control Area
CTLPC TYPE KNKK-CTLPC, " Risk Category
KLIMK TYPE KNKK-KLIMK, " Credit Limit
SBGRP TYPE KNKK-SBGRP, " Credit representative group for credit management
ERDAT TYPE KNKK-ERDAT, " Created On
DTREV TYPE KNKK-DTREV, " Last Internal Review
REVDB TYPE KNKK-REVDB, " Last External Review
SALDO TYPE RF42B-SALDO, " Balance
DSOIN TYPE RF02L-DSOIN, " DSO
H06SA TYPE RF035-H06SA, " Highest Balance at the end of 6 Months
H06JA TYPE RF035-H06JA, " Year highest Balance 6 Months
H06MO TYPE RF035-H06MO, " Month OF hihest Balance 6 Months
H12SA TYPE RF035-H12SA, " Highest Balance at the end of 12 Months
H12JA TYPE RF035-H12JA, " Year highest Balance 12 Months
H12MO TYPE RF035-H12MO, " Month OF hihest Balance 12 Months
UMP2U TYPE RF42B-UMP2U, " Sales from the current Year
UMP1U TYPE RF42B-UMP1U, " Sales from the Previous Year
SFAEL TYPE RF035-SFAEL, " Total Past Due Open Item
SFAE1 TYPE RF035-SFAE1, " Aging buckets 0-15
SFAE2 TYPE RF035-SFAE2, " Aging buckets 16-30
SFAE3 TYPE RF035-SFAE3, " Aging buckets 31-60
SFAE4 TYPE RF035-SFAE4, " Aging buckets 60-90
SFAE5 TYPE RF035-SFAE5, " Aging buckets Over 90
END Of s_cinfo.
*Internal table to hold month-wise balance.
DATA: BEGIN OF SALTAB OCCURS 12,
LNUMM(2) TYPE N, " Month
SALDO LIKE RF42B-SALDO, " Balance
END OF SALTAB.
*Internal table used for computing the Balance fields
DATA: BEGIN OF SALDO,
UML01 LIKE KNC1-UM01S,
UML02 LIKE KNC1-UM01S,
UML03 LIKE KNC1-UM01S,
UML04 LIKE KNC1-UM01S,
UML05 LIKE KNC1-UM01S,
UML06 LIKE KNC1-UM01S,
UML07 LIKE KNC1-UM01S,
UML08 LIKE KNC1-UM01S,
UML09 LIKE KNC1-UM01S,
UML10 LIKE KNC1-UM01S,
UML11 LIKE KNC1-UM01S,
UML12 LIKE KNC1-UM01S,
END OF SALDO.
Structure to hold Bal fields ------ -------
DATA: BEGIN OF SKNKK,
KUNNR LIKE KNA1-KUNNR, " Customer Number 1: Debitor
KONTO LIKE KNKK-KUNNR,
SFAE1 LIKE RF035-SFAE1, " Aging buckets 0-15
SFAE2 LIKE RF035-SFAE2, " Aging buckets 16-30
SFAE3 LIKE RF035-SFAE3, " Aging buckets 30-60
SFAE4 LIKE RF035-SFAE4, " Aging buckets 60-90
SFAE5 LIKE RF035-SFAE5, " Aging buckets Over 90
SFAEL LIKE RF035-SFAEL, " Total Due of Items
UML01 LIKE KNC1-UM01S,
UML02 LIKE KNC1-UM01S,
UML03 LIKE KNC1-UM01S,
UML04 LIKE KNC1-UM01S,
UML05 LIKE KNC1-UM01S,
UML06 LIKE KNC1-UM01S,
UML07 LIKE KNC1-UM01S,
UML08 LIKE KNC1-UM01S,
UML09 LIKE KNC1-UM01S,
UML10 LIKE KNC1-UM01S,
UML11 LIKE KNC1-UM01S,
UML12 LIKE KNC1-UM01S,
UMP1U LIKE RF42B-UMP1U, " Sales from the Previous Year
UMP2U LIKE RF42B-UMP2U, " Sales from the current Year
SALDO LIKE RF42B-SALDO, " Balance
END OF SKNKK.
DATA : BEGIN OF ICUST1 OCCURS 0,
KUNNR TYPE KNA1-KUNNR, "For Customer Filter.
END OF ICUST1.
**Internal table to hold fiscal varriants
DATA: BEGIN OF LT_PERIODS OCCURS 12,
PERIOD LIKE BSID-MONAT,
GJAHR LIKE KNC1-GJAHR,
END OF LT_PERIODS.
**Constants
constants : BUKRS1 TYPE KNB1-BUKRS VALUE '1000',
BUKRS2 TYPE KNB1-BUKRS VALUE '1031',
Recs Type i value '200',
B_count type i value '2'.
INITIALIZATION
INITIALIZATION.
IF RASID IS INITIAL.
SELECT * FROM TRAS.
EXIT.
ENDSELECT.
IF SY-SUBRC = 0.
RASID = TRAS-RASID.
ENDIF.
ENDIF.
SELECTION-SCREEN
parameters : p_path type rlgrap-filename default 'C:\Documents and Settings\C890971\Desktop\Credit_history.XLS'.
Start of selection processing
START-OF-SELECTION.
**Get Customers for Co. Code 1000 & 1031.
PERFORM GET_CUST.
Get / Compute Credit Information data for Company Codes 1000 & 1031.
PERFORM GET_CREDIT_DATA.
End of selection processing
*END-OF-SELECTION.
Listing Credit History Data
PERFORM DOWNLOAD_CREDIT_DATA.
S U B R O U T I N E S
*& Form GET_CUST
text
--> p1 text
<-- p2 text
FORM GET_CUST .
Get US only Customers.
Refresh icust.
Select kunnr from kna1 appending table icust
where Land1 = land.
**Delete duplicate records
Delete Adjacent duplicates from icust comparing kunnr.
if icust[] is not initial.
Limit the selection some more to Co. Code 1000 & 1031
As join will cost overhead as compared.
Select kunnr from knb1 into table icust1
for all entries in icust
where kunnr = icust-kunnr
and bukrs = bukrs1
OR bukrs = bukrs2.
**Delete duplicate records
Delete Adjacent duplicates from icust1 comparing kunnr.
endif.
**Free memory.
Free icust.
Credit Control Area
select * from T001CM into table TCMTAB
where bukrs = bukrs1 OR
bukrs = bukrs2.
ENDFORM. " GET_CUST
*& Form GET_CREDIT_DATA
text
--> p1 text
<-- p2 text
FORM GET_CREDIT_DATA .
DATA : L_TEXT(60) TYPE C ,
Ltext1(50) type C value 'Computing Credit-History Data For',
Ltext2(10) type C value 'Customers',
L_PCT type i value '10',
L_recs type i,
l_batch_recs type i,
l_s_rec type i value 1,
l_recs1(7) type N.
***Fetch data from KNKK table
PERFORM GET_KNKK_DATA .
***Computing Crredit Fields
**Number of Customers For whom Deatils needed.
Describe table I_CINFO lines l_recs.
l_recs1 = l_recs.
Concatenate Ltext1 l_recs1 Ltext2 into l_text separated by ' '.
PERFORM GET_PGRESS_INDICATOR USING l_text l_pct.
***If records are more than 200000, should be processed batch-wise
If l_recs > recs.
l_batch_recs = abs( l_recs / b_count ).
Do b_count times.
loop at i_cinfo INTO S_CINFO from l_S_REC to l_batch_recs.
**Remember the row
sytabix = sy-tabix.
**Compute DSO
PERFORM GET_DSO_FIELD .
Compute rest credit history data.
PERFORM COMPUTE_SFIELDS.
endloop.
l_S_REC = l_S_REC + l_batch_recs.
l_batch_recs = l_batch_recs + l_batch_recs.
IF l_batch_recs ge l_recs.
l_batch_recs = l_recs.
eNDIF.
Commit up to here to release the DB locks.
Commit work.
enddo.
else.
loop at i_cinfo INTO S_CINFO.
**Remember the row
sytabix = sy-tabix.
**Compute DSO
PERFORM GET_DSO_FIELD .
Compute rest credit history data.
PERFORM COMPUTE_SFIELDS.
endloop.
Endif.
ENDFORM. " GET_CREDIT_DATA
*& Form GET_KNKK_DATA
text
-->P_ICUST_KUNNR text
FORM GET_KNKK_DATA .
if icust1[] is not initial.
SELECT KUNNR KNKLI KKBER CTLPC KLIMK
SBGRP ERDAT DTREV REVDB
from KNKK into corresponding fields of table I_Cinfo
for all entries in icust1
where kunnr = icust1-kunnr.
Delete Adjacent duplicates from i_cinfo comparing kunnr.
endif.
**Free Memory for internal table icust1.
Free icust1.
ENDFORM. " GET_KNKK_DATA
**& Form GET_DSO_FIELD
text
--> p1 text
<-- p2 text
FORM GET_DSO_FIELD .
***Determine DSO Parameter
PERFORM DSO_PARAMETER.
***Compute DSO
CALL FUNCTION 'CUSTOMER_DSO_CALCULATION'
EXPORTING
I_KKBER = s_cinfo-kkber
I_KUNNR = s_cinfo-kunnr
I_ANZBUPER = T000CM-DSOPP
I_XCHILDS = T000CM-DSOCH
I_ACTBALANCE = T000CM-DSOAB
IMPORTING
E_DSOIN = RF02L-DSOIN
EXCEPTIONS
ERROR_MESSAGE = 1.
ENDFORM. " GET_DSO_FIELD
*& Form DSO_PARAMETER
text
--> p1 text
<-- p2 text
FORM DSO_PARAMETER.
IF T000CM-DSOPP IS INITIAL.
SELECT SINGLE * FROM T000CM.
IF SY-SUBRC EQ 0.
IF T000CM-DSOPP IS INITIAL.
T000CM-DSOPP = '003'.
ENDIF.
ELSE.
T000CM-DSOPP = '003'.
T000CM-DSOCH = ' '.
T000CM-DSOAB = 'X'.
ENDIF.
ENDIF.
ENDFORM. " DSO_PARAMETER
--> p1 text
<-- p2 text
FORM PERIODE_ERMITTELN_EXC USING
P03_BUDAT LIKE SYST-DATUM
P03_GJAHR LIKE KNC1-GJAHR
P03_MONAT LIKE MONAT.
CALL FUNCTION 'FI_PERIOD_DETERMINE'
EXPORTING
I_BUDAT = P03_BUDAT
I_PERIV = T001-PERIV
I_BUKRS = T001-BUKRS
I_GJAHR = P03_GJAHR
I_MONAT = P03_MONAT
IMPORTING
E_GJAHR = P03_GJAHR
E_MONAT = P03_MONAT
EXCEPTIONS
ERROR_MESSAGE = 1.
ENDFORM. "PERIODE_ERMITTELN_EXC
*& Form COMPUTE_SFIELDS
text
--> p1 text
<-- p2 text
FORM COMPUTE_SFIELDS .
**Compute Balance
PERFORM GET_SFIELDS .
S_CINFO-DSOIN = RF02L-DSOIN.
S_CINFO-SALDO = RF035-SALDO.
S_CINFO-H06SA = RF035-H06SA.
S_CINFO-H06JA = RF035-H06JA.
S_CINFO-H06MO = RF035-H06MO.
S_CINFO-H12SA = RF035-H12SA.
S_CINFO-H12JA = RF035-H12JA.
S_CINFO-H12MO = RF035-H12MO.
S_CINFO-UMP2U = RF42B-UMP2U.
S_CINFO-UMP1U = RF42B-UMP1U.
S_CINFO-SFAEL = RF035-SFAEL.
S_CINFO-SFAE1 = RF035-SFAE1.
S_CINFO-SFAE2 = RF035-SFAE2.
S_CINFO-SFAE3 = RF035-SFAE3.
S_CINFO-SFAE4 = RF035-SFAE4.
S_CINFO-SFAE5 = RF035-SFAE5.
modify..
MODIFY I_CINFO FROM S_CINFO INDEX sytabix.
CLEAR: S_CINFO,RF035,RF02L, RF42B.
ENDFORM. " COMPUTE_SFIELDS
text
-->P_C_INFO_KUNNR text
FORM GET_CUST_BAL_INFO.
LOOP AT TCMTAB.
CALL FUNCTION 'FI_COMPANY_CODE_DATA'
EXPORTING
I_BUKRS = TCMTAB-BUKRS
IMPORTING
E_T001 = T001
EXCEPTIONS
ERROR_MESSAGE = 1.
IF SY-SUBRC = 0.
MOVE-CORRESPONDING T001 TO BUKTAB.
BUKTAB-KKBER = TCMTAB-KKBER.
COLLECT BUKTAB.
ENDIF.
ENDLOOP.
LOOP AT BUKTAB WHERE PERIV NE SPACE.
GJATAB-PERIV = BUKTAB-PERIV.
COLLECT GJATAB.
ENDLOOP.
CLEAR: MONAT.
LOOP AT GJATAB.
T001-PERIV = GJATAB-PERIV.
CLEAR: GJAHR, MONAT.
PERFORM PERIODE_ERMITTELN_EXC USING SY-DATLO GJAHR MONAT.
CHECK SY-SUBRC = 0.
GJATAB-GJAHR = GJAHR.
GJATAB-MONAT = MONAT.
SELECT SINGLE * FROM T009 WHERE PERIV = GJATAB-PERIV.
IF SY-SUBRC = 0.
GJATAB-ANZBP = T009-ANZBP.
ENDIF.
MODIFY GJATAB.
ENDLOOP.
LOOP AT BUKTAB.
CHECK NOT ( BUKTAB-PERIV IS INITIAL ).
READ TABLE GJATAB WITH KEY BUKTAB-PERIV.
CHECK SY-SUBRC = 0
AND NOT ( GJATAB-GJAHR IS INITIAL ).
CALL FUNCTION 'CUSTOMER_BALANCE'
EXPORTING
KUNNR = S_cinfo-kunnr
BUKRS = BUKTAB-BUKRS
GJAHR = GJATAB-GJAHR
MONAT = GJATAB-MONAT
PERIV = GJATAB-PERIV
ANZBP = GJATAB-ANZBP
XH6MON = 'X'
XH12MON = 'X'
IMPORTING
UMP2U = RF42B-UMP2U
VMP2U = RF42B-UMP1U
SALDO = RF035-SALDO
UML01 = SALDO-UML01
UML02 = SALDO-UML02
UML03 = SALDO-UML03
UML04 = SALDO-UML04
UML05 = SALDO-UML05
UML06 = SALDO-UML06
UML07 = SALDO-UML07
UML08 = SALDO-UML08
UML09 = SALDO-UML09
UML10 = SALDO-UML10
UML11 = SALDO-UML11
UML12 = SALDO-UML12
EXCEPTIONS
NO_BALANCE = 4.
IF SY-SUBRC = 0.
SKNKK-UMP1U = SKNKK-UMP1U + RF42B-UMP1U.
SKNKK-UMP2U = SKNKK-UMP2U + RF42B-UMP2U.
SKNKK-SALDO = SKNKK-SALDO + RF035-SALDO.
SKNKK-UML01 = SKNKK-UML01 + SALDO-UML01.
SKNKK-UML02 = SKNKK-UML02 + SALDO-UML02.
SKNKK-UML03 = SKNKK-UML03 + SALDO-UML03.
SKNKK-UML04 = SKNKK-UML04 + SALDO-UML04.
SKNKK-UML05 = SKNKK-UML05 + SALDO-UML05.
SKNKK-UML06 = SKNKK-UML06 + SALDO-UML06.
SKNKK-UML07 = SKNKK-UML07 + SALDO-UML07.
SKNKK-UML08 = SKNKK-UML08 + SALDO-UML08.
SKNKK-UML09 = SKNKK-UML09 + SALDO-UML09.
SKNKK-UML10 = SKNKK-UML10 + SALDO-UML10.
SKNKK-UML11 = SKNKK-UML11 + SALDO-UML11.
SKNKK-UML12 = SKNKK-UML12 + SALDO-UML12.
ENDIF.
ENDLOOP.
ENDFORM. "
*& Form GET_SFIELDS
text
--> p1 text
<-- p2 text
FORM GET_SFIELDS .
sknkk-kunnr = S_CINFO-KUNNR.
**Clear target to store computed values
CLEAR: RF035.
**Compute Balance fields
PERFORM GET_CUST_BAL_INFO.
REFRESH: SALTAB.
SALTAB-LNUMM = '01'. SALTAB-SALDO = SKNKK-UML01. APPEND SALTAB.
SALTAB-LNUMM = '02'. SALTAB-SALDO = SKNKK-UML02. APPEND SALTAB.
SALTAB-LNUMM = '03'. SALTAB-SALDO = SKNKK-UML03. APPEND SALTAB.
SALTAB-LNUMM = '04'. SALTAB-SALDO = SKNKK-UML04. APPEND SALTAB.
SALTAB-LNUMM = '05'. SALTAB-SALDO = SKNKK-UML05. APPEND SALTAB.
SALTAB-LNUMM = '06'. SALTAB-SALDO = SKNKK-UML06. APPEND SALTAB.
SALTAB-LNUMM = '07'. SALTAB-SALDO = SKNKK-UML07. APPEND SALTAB.
SALTAB-LNUMM = '08'. SALTAB-SALDO = SKNKK-UML08. APPEND SALTAB.
SALTAB-LNUMM = '09'. SALTAB-SALDO = SKNKK-UML09. APPEND SALTAB.
SALTAB-LNUMM = '10'. SALTAB-SALDO = SKNKK-UML10. APPEND SALTAB.
SALTAB-LNUMM = '11'. SALTAB-SALDO = SKNKK-UML11. APPEND SALTAB.
SALTAB-LNUMM = '12'. SALTAB-SALDO = SKNKK-UML12. APPEND SALTAB.
READ TABLE SALTAB INDEX 1.
RF035-H06SA = SALTAB-SALDO.
RF035-H06MO = SALTAB-LNUMM.
RF035-H12SA = SALTAB-SALDO.
RF035-H12MO = SALTAB-LNUMM.
------ SALTAB ---------------------------------------------
LOOP AT SALTAB.
IF SALTAB-SALDO > RF035-H06SA
AND SY-TABIX < 7.
RF035-H06SA = SALTAB-SALDO.
RF035-H06MO = SALTAB-LNUMM.
ENDIF.
IF SALTAB-SALDO > RF035-H12SA
AND SY-TABIX < 13.
RF035-H12SA = SALTAB-SALDO.
RF035-H12MO = SALTAB-LNUMM.
ENDIF.
ENDLOOP.
------ Period--------------------
REFRESH LT_PERIODS.
CLEAR LD_COUNTER.
READ TABLE BUKTAB INDEX 1.
IF SY-SUBRC = 0.
READ TABLE GJATAB WITH KEY BUKTAB-PERIV.
DO GJATAB-MONAT TIMES
VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
RANGE LD_PERIODS.
LT_PERIODS-GJAHR = GJATAB-GJAHR.
LT_PERIODS-PERIOD = LD_PERIOD.
LD_COUNTER = LD_COUNTER + 1.
APPEND LT_PERIODS.
ENDDO.
IF LD_COUNTER LT 12.
LD_GJAHR = GJATAB-GJAHR - 1.
CLEAR T009Y.
SELECT SINGLE * FROM T009Y WHERE PERIV = GJATAB-PERIV
AND GJAHR = LD_GJAHR.
DO GJATAB-ANZBP TIMES
VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
RANGE LD_PERIODS.
IF T009Y-ANZBP > 0.
CHECK SY-INDEX <= T009Y-ANZBP.
ENDIF.
LD_COUNTER = LD_COUNTER + 1.
LT_PERIODS-GJAHR = LD_GJAHR.
LT_PERIODS-PERIOD = LD_PERIOD.
APPEND LT_PERIODS.
ENDDO.
ENDIF.
IF LD_COUNTER LT 12.
LD_GJAHR = LD_GJAHR - 1.
DO GJATAB-ANZBP TIMES
VARYING LD_PERIOD FROM LD_PERIODS(2) NEXT LD_PERIODS+2(2)
RANGE LD_PERIODS.
LD_COUNTER = LD_COUNTER + 1.
LT_PERIODS-GJAHR = LD_GJAHR.
LT_PERIODS-PERIOD = LD_PERIOD.
APPEND LT_PERIODS.
ENDDO.
ENDIF.
SORT LT_PERIODS BY GJAHR ASCENDING PERIOD ASCENDING.
LD_COUNTER = LD_COUNTER - 12.
DO LD_COUNTER TIMES.
DELETE LT_PERIODS INDEX 1.
ENDDO.
SORT LT_PERIODS BY GJAHR DESCENDING PERIOD DESCENDING.
READ TABLE LT_PERIODS INDEX RF035-H06MO.
RF035-H06MO = LT_PERIODS-PERIOD.
RF035-H06JA = LT_PERIODS-GJAHR.
READ TABLE LT_PERIODS INDEX RF035-H12MO.
RF035-H12MO = LT_PERIODS-PERIOD.
RF035-H12JA = LT_PERIODS-GJAHR.
ENDIF.
**Compute Due Dates fields
PERFORM GET_AGING_BUCKETS .
RF035-SFAE1 = SKNKK-SFAE1.
RF035-SFAE2 = SKNKK-SFAE2.
RF035-SFAE3 = SKNKK-SFAE3.
RF035-SFAE4 = SKNKK-SFAE4 .
RF035-SFAE5 = SKNKK-SFAE5.
ENDLOOP.
ENDFORM. " GET_BALANCE_SFIELDS
*& Form GET_AGING_BUCKETS
text
--> p1 text
<-- p2 text
FORM GET_AGING_BUCKETS .
DATA: BEGIN OF LT_BUKRS OCCURS 0,
BUKRS LIKE T001-BUKRS,
END OF LT_BUKRS.
DATA: BEGIN OF LT_BUKTAB OCCURS 0,
BUKRS LIKE T001-BUKRS,
WAERS LIKE T001-WAERS,
KKBER LIKE T014-KKBER,
END OF LT_BUKTAB.
DATA: LD_LINES LIKE SY-TABIX.
*...performance optimization: for more than one company codes check....*
*...if balances exist and avoid selection of open items, if they don't.*
*...exist..............................................................*
REFRESH LT_BUKRS.
REFRESH LT_BUKTAB.
DESCRIBE TABLE BUKTAB LINES LD_LINES.
IF LD_LINES GT 1.
SELECT DISTINCT BUKRS APPENDING CORRESPONDING FIELDS
OF TABLE LT_BUKRS
FROM KNC1 FOR ALL ENTRIES IN BUKTAB
WHERE BUKRS = BUKTAB-BUKRS AND
KUNNR = Sknkk-KUNNR.
SELECT DISTINCT BUKRS APPENDING CORRESPONDING FIELDS
OF TABLE LT_BUKRS
FROM KNC3 FOR ALL ENTRIES IN BUKTAB
WHERE BUKRS = BUKTAB-BUKRS AND
KUNNR = Sknkk-KUNNR.
SORT LT_BUKRS.
DELETE ADJACENT DUPLICATES FROM LT_BUKRS.
LOOP AT LT_BUKRS.
LOOP AT BUKTAB WHERE BUKRS = LT_BUKRS-BUKRS.
MOVE-CORRESPONDING BUKTAB TO LT_BUKTAB.
APPEND LT_BUKTAB.
ENDLOOP.
ENDLOOP.
ELSE.
READ TABLE BUKTAB INDEX 1.
MOVE-CORRESPONDING BUKTAB TO LT_BUKTAB.
APPEND LT_BUKTAB.
ENDIF.
*...process company codes for customer given by interface..........*
LOOP AT LT_BUKTAB WHERE KKBER = s_cinfo-KKBER.
CALL FUNCTION 'CUSTOMER_DUE_DATE_ANALYSIS'
EXPORTING BUKRS = LT_BUKTAB-BUKRS
KKBER = ' '
KKBER = s_cinfo-KKBER
KUNNR = Sknkk-KUNNR
RASID = RASID
IMPORTING SFAE1 = RF035-SFAE1
SFAE2 = RF035-SFAE2
SFAE3 = RF035-SFAE3
SFAE4 = RF035-SFAE4
SFAE5 = RF035-SFAE5
SFAEL = RF035-SFAEL
EXCEPTIONS NO_OPEN_ITEMS = 4.
IF SY-SUBRC = 0.
*-- RF035 -
SKNKK-SFAE1 = SKNKK-SFAE1 + RF035-SFAE1.
SKNKK-SFAE2 = SKNKK-SFAE2 + RF035-SFAE2.
SKNKK-SFAE3 = SKNKK-SFAE3 + RF035-SFAE3.
SKNKK-SFAE4 = SKNKK-SFAE4 + RF035-SFAE4.
SKNKK-SFAE5 = SKNKK-SFAE5 + RF035-SFAE5.
SKNKK-SFAE5 = SKNKK-SFAE5 + RF035-SFAE5.
SKNKK-SFAEL = SKNKK-SFAEL + RF035-SFAEL.
ENDIF.
ENDLOOP.
ENDFORM. " GET_AGING_BUCKETS
*& Form header
This Subroutine gets data for displaying title *
There are no interface parameters to be passed to this subroutine. *
FORM header .
wa_final-string = text-000. APPEND wa_final TO i_final.
wa_final-string = text-001. APPEND wa_final TO i_final.
wa_final-string = text-002. APPEND wa_final TO i_final.
wa_final-string = text-003. APPEND wa_final TO i_final.
wa_final-string = text-004. APPEND wa_final TO i_final.
wa_final-string = text-005. APPEND wa_final TO i_final.
wa_final-string = text-006. APPEND wa_final TO i_final.
wa_final-string = text-007. APPEND wa_final TO i_final.
wa_final-string = text-008. APPEND wa_final TO i_final.
wa_final-string = text-009. APPEND wa_final TO i_final.
wa_final-string = text-010. APPEND wa_final TO i_final.
wa_final-string = text-011. APPEND wa_final TO i_final.
wa_final-string = text-012. APPEND wa_final TO i_final.
wa_final-string = text-013. APPEND wa_final TO i_final.
wa_final-string = text-014. APPEND wa_final TO i_final.
wa_final-string = text-015. APPEND wa_final TO i_final.
wa_final-string = text-016. APPEND wa_final TO i_final.
wa_final-string = text-017. APPEND wa_final TO i_final.
wa_final-string = text-018. APPEND wa_final TO i_final.
wa_final-string = text-019. APPEND wa_final TO i_final.
wa_final-string = text-020. APPEND wa_final TO i_final.
wa_final-string = text-021. APPEND wa_final TO i_final.
wa_final-string = text-022. APPEND wa_final TO i_final.
wa_final-string = text-023. APPEND wa_final TO i_final.
wa_final-string = text-024. APPEND wa_final TO i_final.
ENDFORM. " header
*& Form DOWNLOADCREDITDATA
text
-->P_P_PATH text
FORM DOWNLOADCREDITDATA USING P_PATH.
DATA:
lw_file2 TYPE string . " File Path
lw_file2 = p_PATH.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = BIN_FILESIZE
filename = lw_file2
filetype = 'DBF'
APPEND = ' '
write_field_separator = ' '
HEADER = '00'
TRUNC_TRAILING_BLANKS = 'X'
WRITE_LF = 'X'
COL_SELECT = 'X'
COL_SELECT_MASK = ' '
DAT_MODE = 'X'
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = '0'
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH = FILELENGTH
TABLES
data_tab = I_CINFO
fieldnames = i_final
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
no_authority = 5
unknown_error = 6
header_not_allowed = 7
separator_not_allowed = 8
filesize_not_allowed = 9
header_too_long = 10
dp_error_create = 11
dp_error_send = 12
dp_error_write = 13
unknown_dp_error = 14
access_denied = 15
dp_out_of_memory = 16
disk_full = 17
dp_timeout = 18
file_not_found = 19
dataprovider_exception = 20
control_flush_error = 21
IF sy-subrc <> 0.
Messege
ENDIF. " IF sy-subrc EQ 0
ENDFORM. " DOWNLOADCREDITDATA
*& Form DOWNLOAD_CREDIT_DATA
text
--> p1 text
<-- p2 text
FORM DOWNLOAD_CREDIT_DATA .
PERFORM HEADER.
PERFORM DOWNLOADCREDITDATA USING P_PATH.
ENDFORM. " DOWNLOAD_CREDIT_DATA
*& Form GET_PGRESS_INDICATOR
text
-->P_L_TEXT text
-->P_L_PCT text
FORM GET_PGRESS_INDICATOR USING L_TEXT
L_PCT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = l_pct
TEXT = l_TEXT.
ENDFORM. " GET_PGRESS_INDICATORIf you are just Downloading to a Flat file then why dont you have logic in place for the program to dump the data read into the file to that point depending on any criteria like accounts or customer then clear the internal table and run it in the back ground.
try to use cursor to read the records from the table which will make it a bit more efficient than plain select stement. -
Performance issue in Report (getting time out error)
Hi experts,
I am doing Performance for a Report (getting time out error)
Please see the code below and .
while looping internal table IVBAP after 25 minutes its showing time out error at this poit ->
SELECT MAX( ERDAT ) .
please send alternate code for this .
Advance thanks
from
Nagendra
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC <> 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
ENDLOOP.Hi Nagendra!
Get Sales Order Details
CLEAR IVBAP.
REFRESH IVBAP.
check ivbak is not initial
SELECT VBELN POSNR MATNR NETWR KWMENG WERKS FROM VBAP
INTO CORRESPONDING FIELDS OF TABLE IVBAP
FOR ALL ENTRIES IN IVBAK
WHERE VBELN = IVBAK-VBELN
AND MATNR IN Z_MATNR
AND WERKS IN Z_WERKS
AND ABGRU = ' '.
Check for Obsolete Materials - Get Product Hierarhy/Mat'l Description
SORT IVBAP BY MATNR WERKS.
CLEAR: WK_MATNR, WK_WERKS, WK_PRDHA, WK_MAKTX,
WK_BLOCK, WK_MMSTA, WK_MSTAE.
avoid select widin loop. instead do selection outside loop.u can use read statement......and then loop if required.
LOOP AT IVBAP.
CLEAR WK_INVDATE. "I6677.sn
SELECT MAX( ERDAT ) FROM VBRP INTO WK_INVDATE WHERE
AUBEL EQ IVBAP-VBELN AND
AUPOS EQ IVBAP-POSNR.
IF SY-SUBRC = 0.
MOVE WK_INVDATE TO IVBAP-INVDT.
MODIFY IVBAP.
ENDIF. "I6677.e n
SELECT SINGLE * FROM MBEW WHERE "I6759.sn
MATNR EQ IVBAP-MATNR AND
BWKEY EQ IVBAP-WERKS AND
BWTAR EQ SPACE.
IF SY-SUBRC = 0.
MOVE MBEW-STPRS TO IVBAP-STPRS.
IVBAP-TOT = MBEW-STPRS * IVBAP-KWMENG.
MODIFY IVBAP.
ENDIF. "I6759.en
IF IVBAP-MATNR NE WK_MATNR OR IVBAP-WERKS NE WK_WERKS.
CLEAR: WK_BLOCK, WK_MMSTA, WK_MSTAE, WK_PRDHA, WK_MAKTX.
MOVE IVBAP-MATNR TO WK_MATNR.
MOVE IVBAP-WERKS TO WK_WERKS.
SELECT SINGLE MMSTA FROM MARC INTO MARC-MMSTA
WHERE MATNR = WK_MATNR
AND WERKS = WK_WERKS.
IF NOT MARC-MMSTA IS INITIAL.
MOVE '*' TO WK_MMSTA.
ENDIF.
SELECT SINGLE LVORM PRDHA MSTAE MSTAV FROM MARA
INTO (MARA-LVORM, MARA-PRDHA, MARA-MSTAE, MARA-MSTAV)
WHERE MATNR = WK_MATNR.
IF ( NOT MARA-MSTAE IS INITIAL ) OR
( NOT MARA-MSTAV IS INITIAL ) OR
( NOT MARA-LVORM IS INITIAL ).
MOVE '*' TO WK_MSTAE.
ENDIF.
MOVE MARA-PRDHA TO WK_PRDHA.
SELECT SINGLE MAKTX FROM MAKT INTO WK_MAKTX
WHERE MATNR = WK_MATNR
AND SPRAS = SY-LANGU.
ENDIF.
IF Z_BLOCK EQ 'B'.
IF WK_MMSTA EQ ' ' AND WK_MSTAE EQ ' '.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSEIF Z_BLOCK EQ 'U'.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
DELETE IVBAP.
CONTINUE.
ENDIF.
ELSE.
IF WK_MMSTA EQ '' OR WK_MSTAE EQ ''.
MOVE '*' TO WK_BLOCK.
ENDIF.
ENDIF.
IF WK_PRDHA IN Z_PRDHA. "I4792
MOVE WK_BLOCK TO IVBAP-BLOCK.
MOVE WK_PRDHA TO IVBAP-PRDHA.
MOVE WK_MAKTX TO IVBAP-MAKTX.
MODIFY IVBAP.
ELSE. "I4792
DELETE IVBAP. "I4792
ENDIF. "I4792
IF NOT Z_ALNUM[] IS INITIAL. "I9076
SELECT SINGLE * FROM MAEX "I9076
WHERE MATNR = IVBAP-MATNR "I9076
AND ALNUM IN Z_ALNUM. "I9076
IF SY-SUBRC 0. "I9076
DELETE IVBAP. "I9076
ENDIF. "I9076
ENDIF. "I9076
endloop.
U have used many select queries widin loop-endloop which is a big hindrance as far as performance is concerned.Avoid such practice.
Thanks
Deepika -
I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?
Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html -
Time Constraint Error when calling a Function module from Webdynpro ABAP
Any help will be greatly appreciated - Thanks RM
Time Constraint Error
Information on where terminated
Termination occurred in the ABAP program "SAPUP50R" - in
"CHECK_TIME_CONSTRAINT_S1".
The main program was "MP000000 ".
In the source code you have the termination point in line 1069
of the (Include) program "UP50RU01".
Error occurred during batch input processing
Source Code Extract
l_is_inconsistent = 'X'.
ENDIF.
Check if there are inverted time periods.
IF l_prelp_line-begda > l_prelp_line-endda.
l_is_inconsistent = 'X'.
ENDIF.
Check if there are overlaps or gaps.
IF NOT l_prelp_before IS INITIAL.
l_date_difference = l_prelp_line-begda - l_prelp_before-endda.
IF l_date_difference <> 1.
l_is_inconsistent = 'X'.
ENDIF.
ENDIF.
l_prelp_before = l_prelp_line.
ENDLOOP.
IF l_prelp_before-endda <> '99991231'.
l_is_inconsistent = 'X'.
ENDIF.
IF l_is_inconsistent = 'X'.
IF p_access_type = 'R'.
490 Datenbankschiefstand Personalnummer & Infotyp &
MESSAGE x490 WITH l_prelp_before-pernr l_prelp_before-infty.
ELSE.
491 Unzulässige Daten Personalnummer & Infotyp &
Line 1069 Error occcurs >>>> MESSAGE x491 WITH l_prelp_before-pernr l_prelp_before-infty.
ENDIF.
ENDIF.
ENDFORM. " CHECK_TIME_CONSTRAINT_S1 "XYVN0352581
*& Form clear_no_adapter_needed new "XREN844998
text
FORM clear_no_adapter_needed .
CLEAR no_adapter_needed.
ENDFORM. " clear_no_adapter_needed
*& Form set_no_adapter_needed new "XREN844998
text
FORM set_no_adapter_needed .
no_adapter_needed = 'X'.
ENDFORM. " clear_no_adapter_neededHi,
Well, are you trying to do a batch input on infotype 0000? If yes you need to check that the proposed values respects the time constraint, meaning no gap, no overlaps and no inversions. Also fields SUBTY, OBJPS, SPRPS and SEQNR must remain initial when processing IT0000...
Kr,
Manu. -
flash player has been installed multiple time without errors but bbc news website and even flash player help say it isn't. How do i get out of this loop? - using windows 7 ultimate and latest IE11
I have had the same problem for WEEKS and I cannot access any sites that use Flash. Flash has been installed on this computer since I bought it in 2012. I have allowed auto updates but for weeks the updates never get past Step 2 - is this because I do NOT want the Google Tool bar? I use NO tool bars as there is only 6 inches of vertical screen space. Is this because I uncheck wanting Chrome as a default browser? It is already installed, I just don't use it. I came to this site and ran the check is it installed and the system says it is either not installed or not enabled. Version 14 just downloaded about 30 minutes ago - but did not progress to Step 3 although a pop up screen came up with a finish button, which I clicked. WHAT is the problem and how do I fix it? If this were just a compatibility bug between IE11 and Adobe they have had plenty of time to fix it.
Stephanie HC -
Hi,
We are trying to invoke a Web Service from BPEL Process (10.1.3.3.0) and we received below time out error message in em console.
</part></Invoke_1_setJobPostingXML_InputVariable></input><fault><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Read timed out</summary>
Problem here is this error is not coming for all the invocation. For ex. We have posted the input payload at 3:15:34PM today and it thrown an error at 3:45:12 PM with above message. Also its not huge load hitting their server as we are calling the webservice once in 4-5 mins and if we repost the same message, its posting without any issue. This time out error comes 4-5 times daily and want to understand why it occurs everyday.
1. Will BPEL receive an error if we post huge payload to web service?
2. Do we need to set some waiting time to receive the response after posting the data to Web service?
3. Other possible scneario's for timeout error?
Thanks,
SaravanaHi Saravana,
It's likely to be a problem at the remote side or a network latency/communication problem...
How can you affirm "its not huge load hitting their server"? Your service may not be the only source of load...
Cheers,
Vlad -
Dear All,
One of our production system and one of HR user got time out error while executing T-code PA30 , PA40 .
Note : we tried the transaction ( PA30 and PA40 ) in our user id ,it work smooth ,there is no issue with in my user id as well other HR user also .
Only the specific user facing time out error in Production server.
Note : while executing PA30 ,PA40 t-codes ,it takes long time to get initial screen itself finally got time out error (No issue with other SAP HR users) .
Pls check the below logs:
Runtime Error TIME_OUT
Occurred on 17.08.2011 at 08:59:00
Time limit exceeded.
What happened?
The program "SAPLRHAC" has exceeded the maximum permitted runtime without
interruption, and has therefore been terminated.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
After a certain length of time, the program is terminated. In the case
of a work area, this means that
- endless loops (DO, WHILE, ...),
- database accesses producing an excessively large result set,
Kindly advise ,is this related to any Authorization issue ???Hi,
Please share SAP_BASIS/ SAP_HR release/patch level information of the affected SAP system.
I would suggest you to create New Temp SAP User id with exact copy of that affected SAP User ID and then try to access PA30/PA40 with that New SAP User id login into affected system. Check that, u are facing the same behavior/issue with that New Temp SAP User id ?
Regards,
Bhavik G. Shroff -
Time out error on deploying to SAP-J2EE engine.
I got a problem while deploying to SAP-J2EE engine using ant. It takes a lot of time and then throws a time out error.
The problem is with the web.xml file pointing to a DTD in the internet, I have pasted some part of the web.xml below,
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
<display-name>MyPay</display-name>
<description>MyPay</description>
Once I write down the DTD description in the web.xml itself, it works fine.
I have pasted the error trace below,
j2eedeploy:
[echo] Deploying to Local environment...
[echo] C:\Java\Projects/MyPay/dist/MyPay.ear
BUILD FAILED
C:\Java\Projects\MyPay\build.xml:445: java.lang.RuntimeException: ERROR: ID90507: Error occured during getting EARDescriptor : Failed to load resource from the context classloader of the current thread! Loading from classloader was caused by: java.net.ConnectException: Connection timed out: connect
Exception is :
java.io.IOException: Failed to load resource from the context classloader of the current thread! Loading from classloader was caused by: java.net.ConnectException: Connection timed out: connect
at com.sap.engine.lib.xml.parser.URLLoaderBase.resolveEntity(URLLoaderBase.java:148)
at com.sap.engine.lib.xml.parser.XMLParser.scanDTD(XMLParser.java:1271)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2795)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2830)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:229)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:145)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:160)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:261)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:280)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:342)
at com.sap.engine.lib.xml.parser.DOMParser.parse(DOMParser.java:101)
at com.sap.engine.lib.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.java:127)
at com.inqmy.lib.xml.StandardDOMParser.parse(StandardDOMParser.java:127)
at com.inqmy.lib.xml.StandardDOMParser.parse(StandardDOMParser.java:120)
at com.inqmy.services.servlets_jsp.descriptor.jar.WebWar.getWebDescriptor(WebWar.java:98)
at com.inqmy.deploy.tool.deployer.ExtendedEarReader.loadDescriptorFromFile(ExtendedEarReader.java:175)
at com.inqmy.deploy.tool.deployer.ExtendedEarReader.getFullEarDescriptor(ExtendedEarReader.java:104)
at com.inqmy.deploy.manager.DeployManagerImpl.setEar(DeployManagerImpl.java:355)
at com.inqmy.deploy.manager.DeployManagerImpl.setEar(DeployManagerImpl.java:325)
at com.pg.sap.deploy620.SAPDeploy620Manager.process(SAPDeploy620Manager.java:84)
at com.pg.ant.tasks.j2ee620.J2ee620EngineDeployTask.execute(J2ee620EngineDeployTask.java:40)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
at org.apache.tools.ant.Task.perform(Task.java:364)
at org.apache.tools.ant.Target.execute(Target.java:341)
at org.apache.tools.ant.Target.performTasks(Target.java:369)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
at org.eclipse.ant.internal.ui.antsupport.EclipseDefaultExecutor.executeTargets(EclipseDefaultExecutor.java:32)
at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.run(InternalAntRunner.java:423)
at org.eclipse.ant.internal.ui.antsupport.InternalAntRunner.main(InternalAntRunner.java:137)Thanks for your reply Kalyan,
The problem seems to be with my system, because I had run the same ant script in another system and it deployed successfully.
The problem does not seem to be with the dtd, whereas it seems that the SAP-J2EE engine is not able to open the link to the dtd giving a time out error.
Is it possible to switch off the validation process of the SAP-J2EE engine of an xml with the dtd? -
I used to update my iPhone 4S applications whenever a new update is available, but at this time, "unknown error" displays after entering my apple id password. Anyone who could help, whom they might have experienced? Thanks
Hi Christianjr,
When you say you reset your network settings, what do you mean, exactly?
I saw another post on this issue, and the poster indicated that they resolved the problem by turning off their cellular date option and wifi options in Settings, and then turned them back on.
Also, resetting your phone may help - press the Home and Power buttons at the same time and continue to hold both down until the Silver Apple appears. Once it is back up, click on the update option and see if it fixes the problem.
If none of those things work, then need to have details on what you did to reset your network settings....
Cheers,
GB -
WIH 00013 time out error while viewing a BO Web intelligence report
Hi,
I have a BO web intelligence report. While viewing the report i get WIH 00013 time out error. I have another report with everything same as this one except for one filter condition. That is working fine but former is giving me an error.
I tried changing the timeout values to 120 minutes from 90 minutes in connection server setting but didn't work.
Also when i run the same report by scheduling it in CMC and format as PDF, then it works fine. This error only comes when i try to view the report directly from infoview.
Please let me know if there is any other way to resolve.
Thanks!
Edited by: Satya Suma on Mar 9, 2011 1:31 PM
Edited by: Satya Suma on Mar 9, 2011 2:00 PMHi Suma,
These links may be helpful to you:
WIH00013 - Invalid Session
WIH 00013: Invalid session
All the Best,
Madhu.... -
Time out error while running the FR report on Workspace
Hi,
We are working on Hyperion system 9.3.1 financial reporting with Essbase as a data source.
We have built a report, which has many computation, conditional formatting, suppression condtion.Report has around 100 columns.
Now when we are try to open this report on workspace, report is throwing the "Server time out" error meassage. error meassage is-
"The requested item could not be loaded by thr proxy. Timed out".
Reports are opening fine with less data or if essbase cube doesn't have any data.
Please suggest us on this issue. Do we need to set any setting at Essbase level or workspace level or any other way.
Any help will be appriciated.
Thanks & Regards,
Mohit JainI would suggest by saying that 100 columns seems quite a lot, you mention there are many computation columns, these should be pushed back onto the server to calculate.
We have also experienced issues where reports we pulling back lots of columns that were dynamically calculated.
To narrow down the actual problem you can try the following, the see if the report runs with the change, if not continue with the next steps:
- remove all formatting from the spreadsheet;
- remove all calculations from the spreadsheet;
- see if the report can be built more efficiently, by moving items to Grid POV or using same as, or reordering dimensions in inverse outline order;
If it still doesn't run, then try removing columns until it can run.
Cheers, Iain -
Time evaluation error "Error while positioning ABWKONTI" for leave entitlem
We are currently running on SAP ECC5. Time evaluation is run with schema TQTA everymonth to create leave quotas in info type 2006.
I am experiencing a time evaluation error "Error while positioning ABWKONTI" for one employee when running TQTA.
This employee was engaged on 14/08/2006. When I checked the logged changes per infotype, I found that a record for 14/07/2006 was deleted. I did check all the infotypes and all is reflecting the correct start date. I would really appreciate if someone can tell me how to fix this problem. Currently the leave entitlements are being processed manually. Please see below the error I am receiving:-
Log: Time Evaluation
4 General data
Successful personnel numbers
Personnel numbers with errors
Personnel numbers ended early
5 Personnel Numbers Rejected
5 00408765 Van Wyk Werner
U Error while positioning ABWKONTI
13A200608 0002006081320060714###%##
Quota could not be positioned:
2006 08 2006.07.14 2006.08.13
Relative day in period: 13 200706
Quota used/quota entitlement to be accounted: 1.25000
Person rejected: 00408765
Messages
5 Statistics
Selected personnel numbers 1
Successful runs for 0
including with errors 0
Processing not completed for 0
Rejected 1
Total number of messages and error messages 1Hi,
Which Function Ur using for TQTR, Check That other wise P2006 Function Used.
I think the error is in ur PCR.
First u Understand the business process then write the PCR.
Send ur pcr what u had written.
also send ur Business senerio.like Conditions........ -
Time Our Error while executing a BW reports.
Hello BW experts ,
We are getting the 'Time Our Error while executing some BW reports.'
Could anyone help us to solve the above issue.
regards,
Amol.Hi,
previous answer is necessary, always check the shortdumps ... it can tell you alot about your problem
(ST22)..
what also could help is the following ... go to the infopackage, go to <u>scheduler</u> in the upper taskbar and there you can also set the time out parameters ..
But first, get your problem solved by the things you can read in the shortdump analysis report
also clever, is doing an extract test before you start loading ... rsa3
hope this helps ...
best regards,
Davy
Maybe you are looking for
-
Firofx (5.0) starts with two pages. One is the welcome to Firofox and also that there are Add-ons available. The other one is my homepage (google). I want to stop the first page. How can I do this?
-
Running a script in an .csv file
I have an excel .csv I need to apply formatting to each time it is opened. The file has 1 query to pull data from a .txt file Take the data and display in appropriate columns Use a macro ( or script ), to check data in columns Display query data in a
-
Use different language and Spell check
Hello, just got an iPad to supplement my two Android phones, and like it so far... Except for one thing that drives me nuts... The spell check. I live in Scandinavia, but like to use English as my interface language. This causes major problems, when
-
How to create an INSERT trigger which creates a "sequence number"
Imagine a table T_Q with columns C_1, C_2, C_3 and UN_123. C_1, C_2 and C_3 are all numeric and given by the user. UN_123 has to be a calculated sequence number starting by 1 and incremented by 1 for each combination of C_1, C_2 and C_3, i.e., the se
-
FormsCentral PDF Form- How to View Multi-line Fields
I have a FormsCentral PDF form, which allows users to fill out the form and save as a PDF. However, after receiving the completed forms, I am unable to see all the text in the multi-line field boxes without opening them and scrolling down. Since I wi