Time mismatch between controller and AP, why?

Hello all,
I have a lab setup with a Cisco vWLC deployed in VMWare ESXI and 2x 1131 APs,
The APs are failing to join the controller due to a certificate error. I have noticed that the time that APs are using is an hour out from the controller.
The controller time and timezone are set correctly (London timezone, it's currently summer time here so its GMT+1), but the APs are being set to an hour early (GMT+0) and are failing to join.
I tried setting the time manually on the APs, but as soon as they talk to the controller it sets itself wrong again!
How can I resolve this?
Thanks
Ben

How can I resolve this?
You can't.
LWAPP/CAPWAP standards do not include the APs to inherit timezones of the controller. So the controller can have different timezones but the controller-based APs are always in UTC/GMT/Zulu timezones.

Similar Messages

Time sync between AP and Controller failed

Hi,
I just lost one AP from vWLC and found this trap:
Time sync between AP and Controller failed
What that is means?
I check time on remaining AP's and found out that time on AP's is different form wlc (time on AP's is 2 hours less than time configured on vWLC).
On vWLC I have configured NTP and timezone.

Ok, I try that on one ap next week, but problem is that I have 50 of them on 6m pole and many of them have same traceback in logg:
%SYS-3-TIMERNEG: Cannot start timer (0x694CC78) with negative offset (-1398025296). -Process= "CAPWAP CLIENT", ipl= 0, pid= 125
-Traceback= 298098z 3A5660z 3A3A44z AB2DC4z 99F8D0z A1B630z 9BB734z 9B3FBCz 958EA0z 96ED68z 97E1F4z 97A6A4z 9804F4z 9807D4z 969C48z 96A114z
*Sep 2 17:41:18.351: %SYS-3-TIMERNEG: Cannot start timer (0x694CC78) with negative offset (-1429528296). -Process= "CAPWAP CLIENT", ipl= 0, pid= 125
-Traceback= 298098z 3A5660z 3A3A44z AB2DC4z 99F8D0z A1B630z 9BB734z 9B3FBCz 958EA0z 96ED68z 97E1F4z 97A6A4z 9804F4z 9807D4z 969C48z 96A114z
*Sep 2 17:45:26.439: %SYS-3-TIMERNEG: Cannot start timer (0x694CC78) with negative offset (-1429528296). -Process= "CAPWAP CLIENT", ipl= 0, pid= 125
-Traceback= 298098z 3A5660z 3A3A44z AB2DC4z 99F8D0z A1B630z 9BB734z 9B3FBCz 958EA0z 96ED68z 97E1F4z 97A6A4z 9804F4z 9807D4z 969C48z 96A114z
*Sep 2 17:45:37.831: %SYS-3-TIMERNEG: Cannot start timer (0x694CC78) with negative offset (-1429528296). -Process= "CAPWAP CLIENT", ipl= 0, pid= 125
-Traceback= 298098z 3A5660z 3A3A44z AB2DC4z 99F8D0z A1B630z 9BB734z 9B3FBCz 958EA0z 96ED68z 97E1F4z 97A6A4z 9804F4z 9807D4z 969C48z 96A114z
*Sep 2 19:02:15.394: Fw Aborting cmd before Timeout
*Sep 2 19:02:15.394: mvl_handle_timeout called cmdtype=[0x20]
Only one is disconnected because Time sync between AP and Controller failed trap.
Many of them have logg filed with:
*Aug 31 08:21:45.382: Dtx dump: 4B07D5C 2192 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4ACCA2C 2193 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AEA3C4 2194 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AD1DD8 2195 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4ACC284 2196 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AE4F00 2197 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AE8498 2198 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AEF054 2199 0 flags 423 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4ACE46C 2200 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AFE324 2201 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AD4CE0 2202 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
*Aug 31 08:21:45.382: Dtx dump: 4AD53FC 2203 0 flags 23 101000 blkedmsk:FE01 blkedidx:0 aid:25
cpq 7C31D58
Don't know what that mean.

Mismatch between availability and marker

I have run the following command:
/repvfy -detail -fix -pwd password
and am seeing a section called "Mismatch between availabiltiy and marker". What does this mean? I know there is a bug out from Note: 735957 against 10.2.04 and that patch 6951116 is available. I also know this bug is fixed in 10.2.0.5. But I don't know what exactly this section is telling me. Here is the output I am seeing:
6. Mismatches between availability and marker
TARGET_GUID TARGET_NAME TARGET_TYPE MARKER_AVAIL_STATUS MARKER_TIME CURRENT_STATUS START_TIME
9CB8EE19415C3C6B55954BF3346C1106 ssan-Internal Concurrent Manager oracle_apps_icm 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:22
1B21AAEF5AC63DD44FE339B7852EA1EE ssan-Report Server_ssan_devstar2 oracle_apps_reports 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:13
F5EAD749526EC1116A70157771E3D011 ssan-Oracle Workflow Agent Listener oracle_apps_wfalsnr 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:29
CD32714673BC508CDBF85BF191A5A1B7 ssan-Workflow Background Engine oracle_apps_wfbg 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:26
FADA1D6BF4DFD0E8AA1739A6666BA210 SSAN oracle_database 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:40
0BE2ACE2EDC7271744DA1A249E30C9A5 APPS_ssan oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:12
89D241EEEF24821E30AD66741BC3D433 devstar2.rtd-denver.com oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:20
F40BAF501645A5957A498E7A270AEA47 ssan-Apps Listener_ssan_devstar2 oracle_listener 6 09-JUN-2009 10:41:50 1 28-MAY-2009 14:25:28
8 rows selected.

Various provision like Freight, transport etc .
these should go to separate GL accounts. if you give wrong account assignment value will be passed to GRIR. then difference will happen
sunoj

Mismatch between sound and video

When I watch a movie in iTunes of Apple TV (2gen) and I want to move it few seconds/ minutes and more backwards then it like "losing its mind",
the video jumps forward (a lot forward) and the sound stays the same, so ther is mismatchment between sound and video.
What can i do to solve this problem?
Thank you!

Am I the only one suffering this issue with the video transcoding?

Time taken between GRN and Quality inspection

Hi all,
Once the GRN happens the Qty is moved to the quality inspection and when quality inspection is completed the stock is moved to unrestricted use...so i want the time from the qty moved to Q insp to the time ir reached the unrestricted....
Is there any standard report to find the time taken for quality inspection..???
Regards,
Joseph.
Edited by: joseph5885 on Nov 11, 2010 3:01 PM

This is referred as the lead time in QI .This is available in std reports but in SAP std its considered to be the 24 hrs duration.
Refer thread.
Re: time taken between grn and QM inspection

Color mismatch between CS4 and Canon PIXMA PRO6500

Hi there! I am trying to research if anyone else is having a problem with color mismatch between CS4 and their printer. Last night I printed a .tiff image out of CS4 to my Canon PRO6500 printer and the sky came out purple / pink! It was supposed to be a stormy grey color. I have the color management turned off on the printer settings. I have CS4 manages color turned on and the correct ICC profile selected for the paper I am using. When I do a soft proof in CS4 the image looks fine, but when I print I get something completely different, mostly with the sky (purple / pink) color! Just for the heck of it I did a Print Preview under my Page Setup and guess what, the sky actually shows purple / pink! So I have no idea what's going on. I checked all my setting, ink cartridges, tried different paper with the appropriate ICC profile and no dice. Still have a goofy looking sky! I thought PROOFING the image is supposed to show you how the printed image is going to look? apparently it doesn't because it's not. The Print Preview has an accurate representation of the print but I have no idea where the pink / purple sky is coming from. They are supposed to be stormy clouds as I said. I appreciate any help anyone can provide .
Sabciu

I have the color management turned off on the printer settings.
But do you have a measured color profile based on a sample print? Most likely not, so this is not doing anything in your favor. The current profile may present the defaults for a given printer, but not the actual density based on your other printer settings. So by all means, unless you can be sure to obey a full calibration throughout, turn on the printer CM. Also, since it is a Pro model, you may actualyl have to use the dedicated RIP software that was bundled with it to get correct results, not the default windows print engine.
Mylenium

Config mismatch between VSM and VPath - CSCum76142 bug

Hi all,
I got the error message "Config mismatch between VSM and VPath" on my Nexus VSM but I could not see any detail regarding this bug ID due to permission issue. Has anyone else got access to see this bug detail and able to share? I need to know if this bug is critical or just cosmetic. Thanks
regards,
Robin

Hi Robin,
This DDTS was Junked. But here's the workaround that is mentioned:
1. Deleting the vservice config (no vservice) & reconfiguring vservice, will get rid of this mismatch issue.
2. Toggling the port-profile should also work.
I see couple of other DDTS as well related to this and i would suggest to ask this question in "Other Data Center Subjects" forum for detailed and quick answer.
CSCtz36835 :Config mismatch on VSM and Vpath after deleting service vlan
Regards,
Kanwal
Note: Please mark answers if they are helpful.

Contrast mismatch between Organizer and Editor

I can edit an image in Editor to where it looks great, to include the contrast, brightness, shadows, etc. When I send it back to the Organizer, it look much too contrasty and dark. When I use the same images in a slideshow originating in Organizer, they still look too contrasty. Is there a way to correct this? I'm using PSE 10 on a Windows 7 -64 bit machine. Thanks for any ideas.

Thanks for your quick response. I just checked out the settings in both the Editor and Organizer and they're both set on "let me decide". I'm not sure what to do on that one. I could go with optimizing the computer screen with sRGB, or the Adobe RGB for the printer, or no management, or decide on the fly. If I go with the computer, I guess I'd have to change it when I print a photo out, and vice versa. Have any suggestions for me? Thanks again.
New update. I have a Dell color laser printer, and I just checked the manual. It offers both sRGB and AdobeRGB. My priority is really to have a good printout. If I check sRGB I should be safe for either print or computer, but I'm wondering if I'd get as good a printout with sRGB as with AdobeRGB. The easiest might be to see what the printer is curently set on, and then set PSE Organizer and Editor to match it. I'll do that, and then see if that helps the mismatch between Organizer and Editor.

Data mismatch between 10g and 11g.

Hi
We recently upgraded OBIEE to 11.1.1.6.0 from 10.1.3.4.0. While testing we found data mismatch between 10g and 11g in-case of few reports which are including a front end calculated column with division included in it, say for example ("- Paycheck"."Earnings" / COUNT(DISTINCT "- Pay"."Check Date")) / 25.
The data is matching for the below scenarios.
1) When the column is removed from both 10g and 11g.
2) When the aggregation rule is set to either "Sum or Count" in both 10g and 11g.
It would be very helpful and greatly appreciated if any workaround/pointers to solve this issue is provided.
Thanks

jfedynic wrote:
The 10g and 11.1.0.7 Databases are currently set to AL32UTF8.
In each database there is a VARCHAR2 field used to store data, but not specifically AL32UTF8 data but encrypted data.
Using the 10g Client to connect to either the 10g database or 11g database it works fine.
Using the 11.1.0.7 Client to go against either the 10g or 11g database and it produces the error: ORA-29275: partial multibyte character
What has changed?
Was it considered a Bug in 10g because it allowed this behavior and now 11g is operating correctly?
29275, 00000, "partial multibyte character"
// *Cause: The requested read operation could not complete because a partial
//          multibyte character was found at the end of the input.
// *Action: Ensure that the complete multibyte character is sent from the
//          remote server and retry the operation. Or read the partial
//          multibyte character as RAW.It appears to me a bug got fixed.

Meeting time mismatch between MS Outlook 2011 and iCal

Devices:
Mac Air running OS X 10.10 with MS Office 2011 (Outlook via IMAP) - no Exchange.
Also running Mail concurrently via IMAP.
iPhone 6+ running iOS 8.2.
Time Zone:
New Zealand on daylight saving - UTC/GMT +13:00
Background:
I have using both Microsoft and Apple Mail and Calendar (iCal) platforms concurrently on various MacBooks etc for at least 5 years i.e. previously MS Entourage 2008 (?) now Outlook 2011. Once upon a time Entourage/Outlook & Mail/iCal used to sync quite nicely via iTunes and sync services but then that functionality was taken away from us in Mavericks. There was a lot of fuss about this!
I managed to find a work around that worked for me. Far more detail can be found in a previous thread https://discussions.apple.com/thread/5479205 but in short I found I could drag calendar and contacts from Outlook to iCal & Contacts and vice versa without too much fuss for my volume of meetings etc.
Once meetings and contacts were in iCal and Contacts then iCloud made sure they synced with my iPhone - YAY!!!
THAT ALL CHANGED AGAIN WITH YOSEMITE !!!!!!
Problem:
It would seem that since upgrading to Yosemite I am experiencing serious TIME ZONE discrepancies between Meeting requests in Outlook and OS X / IOS.
Example:
1. Meeting request created in Outlook from external 3rd party contact received for Sunday, 23 November 2014 10.00am - 12.00pm
Shows correctly in Outlook
OS X & iOS show event exactly 13 hours later @ Sunday, 23 November 11.00pm - 1.00am
This is exactly the time difference between GMT/UTC and NZT (or GMT/UTC +13:00)
Because meeting/event is from a 3rd party the date/time cannot be edited.
Accepting locks it in at the wrong time which ends up being synced to iPhone.
2. Meeting request created by 'self' in Outlook and dragged onto iCal in OS X for Saturday, 13 December 2014 3.30pm - 4.00pm
Shows correctly in Outlook (as you'd expect!)
The instant its dragged across the iCal 'Adding a new event' pop up box appears.
Click 'OK' and for literally 2 seconds it's displayed as the right day and time ...
BUT THEN it jumps (moves) to Saturday, 14 December 2014 4.30am - 5.00am!!! Exactly 13 hours later.
When iOS updates via iCloud it also shows the event @ Saturday, 14 December 2014 4.30am - 5.00am.
Log on to iCloud (web calendar) and it's the same.
Again this is exactly the time difference between GMT/UTC and NZT (or GMT/UTC +13:00).
NOW CHECK THIS OUT - double click event in iCal OR iCloud web calendar and it shows the details as "13 December 3.30pm - 4.00pm (GMT)"
See images -
3. Meeting request created by 'self' in Outlook and dragged onto iCal in OS X for Friday, 7 December 2014 12.00pm - 1.30pm PLUS added and sent to invitee
Shows correctly in Outlook (as you'd expect!)
The instant its dragged across the iCal 'Adding a new event' pop up box appears.
Click 'OK' and for literally 2 seconds it's displayed as the right day and time ...
BUT THEN it jumps (moves) to Saturday, 8 November 2014 1.00am - 2.30am.
So everything else is as previously described ... the EXCEPTION here is the person who I sent the invite to.
They received it in OS X Mail and iOS - it also appeared in their calendars Saturday, 8 November 2014 1.00am - 2.30am rather than the more suitable time for a Friday business lunch!!
Given this worked fine under Mavericks and the only thing to have changed is an upgrade to Yosemite then there has to be a bug in Yosemite??
I've attempted to be as thorough with my testing as possible but whilst I am in IT Sales and Business Dev, I am not an engineer!! Therefore I am very keen to hear from any far more intelligent being that suggest other tests, what I should do next or better still how to fix it !!!!
Now I shall sit and wait for the arrival of great and profound wisdom ... yes, still smiling but I don't know for how long!!

So no replies/comments but lots of views ... either means I haven't reached someone who's prepared to tackle this one or everyone thinks I'm a Muppet for doing things the way I do!!
Because of the many views and at least 2 persons who have indicated they have the same issue ...
UPDATE:
So much research!!! Would appear that Outlook is designed to send calendar events in UTC/GMT time irrespective of local - don't quote me! That being the case that would explain why the events I had issues with turn up with showing GMT. Would also suggest that for some reason iCal cannot see inside to translate the actual time ... anyway ... moving on.
So at this point I need to say I have turned off in Mac Mail preferences "Add invitations to Calendar - Automatically" and set to "Never" ... I will try testing with that "on" again later.
For now here's a kludged workaround for at least the process that I use i.e. dragging meetings from Outlook to iCal to sync via iCloud to my iPhone.
Before I would drag the Outlook event (straight from Outlook's calendar) onto the iCal icon (sorry realize I hadn't perhaps been explicit on that before) ... that would then open iCal if not already open and then 'pop' the 'Adding a new event' box ... click 'OK' and it'd be entered with the same alert time etc ... that once worked, then broke hence this post!!
So what I've found that does work (with some shortcomings) is (and easier if you're running dual screens!!):
Open iCal - best if you use Day view
Drag the Outlook event to that day and to the correct time
N.B.: Duration, Category and Alert information is lost
Open event in iCal and edit the above
Syncs immediately to iCloud and in its own good time to iPhone
I have tested this against my original examples:
Example 1 - Works for events/meetings received from external Outlook source - you can open and edit the time and alerts. Not sure if it creates any grief or extra clutter at the senders end!! Guess I'll hear about that soon enough.
Example 2 - Works for events/meetings created by me in Outlook and dragged over - same deal - still have to edit duration and alerts etc.
Example 3 - Hmmmm ... haven't tried adding an invitee who I know is an iCal only user yet. I expect that if sent from Outlook he's still going to have it show up wrong at his end so will be a set of instructions and training I expect. I have an idea that may work ... will have to test.
SORRY - I said it was a Kludge.
I will see if this approach remains stable for a bit before turning back on the "Add invitations to Calendar - Automatically" setting in Mail.
I'll report back again after that.

Data mismatch between TABLE and Std. Extract str. (AFPO & 2LIS_04_P_MATNR)

Hi,
I am getting data mismatch in ECC standard table and ECC standard extract structure. Please help me.
I am using 2LIS_04_P_P_MATNR data source (standard extract structure).
I have following data in ECC Table (AFPO - Order Item).
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 0
PSMNG (ORDER QTY) --> 2000
Extract Structure is showing following data.
AUFNR (Order Number) --> 4000460
PGMNG (Total planned quantity) --> 2000 (It should be zero)
PSMNG (ORDER QTY) --> 2000
I have checked with many other order numbers. The extract structure in RSA3 is showing correct values only if PGMNG is non-zero values. If PGMNG is zero, then it is automatically assigning PSMNG value.
Is this common? I want to display correct values for PGMNG from AFPO Table. Why this mismatch between table data and extract data. I have done all required steps refreshing data (deleting setup tables, filling set up tables etc.).
pls suggest. Poinsts will be assigned to every useful answer.
Thanks in advance.

Hi Avneet,
I have a similar problem where in AFPO shows value 1000 in PSMNG field and 1200 in RSA3 for extractor 2LIS_04_P_MATNR.
I have found that the standard feature of the extractor extracts the data at the time of release of process order. If the process order is changed after the release then the extractor will not picup the chagne.
Ex: AFPO value 1000 ---BI Value 1000
Now released in ECC
AFPO value 1000 ---BI Value 1000
In ECC value changed to 1500 after the release. BI will not pickup the change.
Extractor is pulling the data from MCAFPOV table. You can check the values, there it matches with RSA3 values.
I was just going thru forums for the solution. After i found the solution. I am just updating it.
Hope it helps you.
Thaks
Srikanth

Execution time difference between Statspack and DBM_Monitor trace

Hi Everyone,
We noticed that output of query execution time is quite differ between statspack and session tracing (DBMS_MONITOR) report. The query execution time in Statspack was 1402 sec and in session trace file was 312.25 Sec. FYI database version is 11.2.0.3 which is installed on platform OL 5.8
Both of the following reports (Staspack/tracing) was executed on same system and at the same time. Could you suggest why execution time is differ in staspack and session tracing?
Staspack execution time :-
Elapsed Elap per CPU Old
Time (s) Executions Exec (s) %Total Time (s) Physical Reads Hash Value
1402.50 1 1402.50 9.1 53.92 256,142 3247794574
select * from ( select * from ( select resourcecontentslocati
on,isprotocolname,ismimecontenttype,indexedmetatext,objectid,met
atext,valueaddxml,resourcetype,resourceviewedtime,iscmaresultid,
resourcelastviewedbyuser,issequencenumber,nvl(length(contents),0
Session tracing time:-
call count cpu elapsed disk query current rows
Parse 1 10.58 256.44 43364 153091 0 0
Execute 1 0.01 0.08 0 0 0 0
Fetch 143 2.09 55.72 25440 32978 0 1000
total 145 12.69 312.25 68804 186069 0 1000
Thanks
Rajdeep

Hi,
First of all, please read the [url https://wikis.oracle.com/display/Forums/Forums+FAQ]FAQ page and find out how to use the code tags to format your output properly so that it's readable.
I don't want to work out the stats formatting but I'd guess that if you ran the query first time and the data was not cached, it would be slower than the 2nd query when it was cached. The stats should confirm this so please format them so we can see it properly.
Rob

DataSource / Structures mismatched between Dev and Test Systems. ..!!

Hi,
We are doing a scenario. Where XI will update the data into PSA through ABAP proxy.
Scenario worked perfectly in development system.
We transported the objects from Dev to test. The Strucures are mismatched in SE11 between development and Test systems as below.
Data sources (ZDS_RECIHDR and ZDS_RECTPALL) looks ok. But when I saw the structures in SE11 they are not correct, they got mismatched.
Development:
/BIC/CQZDS_REC00001000 - Header (ZDS_RECIHDR)
/BIC/CQZDS_REC00003000 - Allocation (ZDS_RECTPALL)
Test:
/BIC/CQZDS_REC00001000 - Allocation (ZDS_RECTPALL)
/BIC/CQZDS_REC00003000 - Header (ZDS_RECIHDR)
Kindly let me know where it might have gone wrong?
Thanks
Deepthi

We done it already. Still it is failing.
While transporting, it is failing and showing the error as
Program ZPI_CL_IA_PAYMENT_ALLOCATION1=CP, Include ZPI_CL_IA_PAYMENT_ALLOCATION1=CM001: Syntax error in line 000016
The data object 'L_S_DATA' has no component called'/BIC/ZSALENUM', but there is a component called
Program ZPI_CL_IA_PAYMENT_HEADER======CP, Include ZPI_CL_IA_PAYMENT_HEADER======CM001: Syntax error in line 000016
The data object 'L_S_DATA' has no component called'/BIC/ZTRANDATE', but there are the following com
The Structure is mismatched in SE11 between header and allocation structures. That is the reason it is failing.
Any more ideas pls?

PPDS production order dates mismatch between APO and R3

Hi Friends,
We are facing one problem regarding production order date mish match between R3 and APO systems specific to a product.
The product is planned in PPDS and the order automatically transfer to R3 through online CIF.
PPM has got two operations 0010 and 0020 and activity relationships are like this:
P(0010) - P(0020) Start - Start relation ship
S(0010) - P(0010) End - Start relationship.
In PPDS dates are shown as :
on operation 0010 the start/end dates are shown as 08.15.09 to 08.22.09
on operation 0020 the start/end dates are shown as 08.15.09 to 08.22.09
Overall order start date is 08.15.09
Overall order finish date is 08.22.09
and in R3 dates are shown as:
on operation 0010 the start/end date are shown as 08.15.09 to 08.22.09
on operation 0020 the start/end dates are shown as 08.22.09 to 08.29.09
Overall order start date is 08.15.09
Overall order finish date is 08.29.09
The order is off one week (APO vs R3) with start and finish dates.
if we change DS Board settings to ignore internal relationships manually then the dates are matching exactly in APO and R3.
We want the production order dates to be matched without manual intervention.
Could some one please provide some hints on what is happening here and how to correct it.
Thanks.
Krish

Hi Friends,
Thanks a lot for your valuable replies in this regard.
Actually this problem is in production environment and it took some time to test the problem with the master data modifications
you suggested.
As DB and Siddhrath mentioned, the problem was with routing definition. There is no parallel sequence maintained in the routing but there is start-start relation maintained in APO PPM.
We corrected the routing definition and checked the order dates. Now the dates are matching in R3 and APO.
I am awarding DB and Siddharth each five points in this regard.
Once again thank you all for your time and valuable replies.
-Regards
Krish.

Timing mismatch between picture and sound.

I have been using Premier Element ver. 12 with my films recorded with my Canon EOS camera without any problems. I have now been trying to clip a film recorded with a MAC copmuter. The files have .mov extension. My problem now is, that the sound and the pictures are not sycnroniced anymore. It seems that the Pictures are 3 seconds faster per minute than the sound. So after 20 minutes the Pictures are 1 minute in front of the sound. Playing the original files with the Windows player Works fine and the timing of the sound in Premiere Elements fits with sound using the Windows player.
Any Ideas????
Gert Munch

Hi' ATR
Ref. #8
Loading one of the problem files into Movie Maker Shows a small but constant shift between sound and Video within Movie Maker. Easy to fix. Exporting and import into Premiere Elements shows the same small but constant misallignment. That is good.
The screenshots of the required readings is seen below
Properties from Premiere Elements:
I did not dare to install the MediaInfo properties readout program as I was warned about malware.
Ref. #9
From Movie Maker the Video bitrate is stated to be:
15-12-14: 177232 kbps
12-01-15: 81164 kbps
16-02-15: 177396 kbps
10-03-15: 280596 kbps
From the above screen shots the audio bitrate seems to be 128 kbps
Hope this makes sense to you.
Gert

Time mismatch between controller and AP, why?

Similar Messages

Maybe you are looking for