Time needed to load maps?

How long does it take to load maps via OviSuite? I have been trying to download UK (184MB) and so far it has been running for about 20minutes. At this rate it is going to take me a week to download all of the countries I visit in Western Europe.
Is there no quicker way of getting maps on the N8?

It is not so much downloading the individual country that takes the time although servers not terribly rapid, but decompressing the .zip file and writing to mass memory or memory card as required.
It can be faster downloading maps directly from the servers as detailed in posts by ovikovi in which case entire world of approximately 8.5GB can be downloaded and written to memory in about 4 hours. Point to bear in mind that if carrying out an unofficial procedure you will lose the ability to read what maps are stored on device at later date.
Another suggestion might be that you consider installing version of OVI Maps available from Nokia Beta Labs here (sign in with Nokia ID & password) http://betalabs.nokia.com/apps/ovi-maps-for-mobile-v3-06-check-in-update for (2) reasons:- Allow you to utilise "Update" feature within application to download more recent map set 00.02.42.122 via WLAN access point on your N8 obviating need to use OVI Suite on PC for this purpose.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Why on Apple TV do some movies need to load every time and some just star to play. This is on ones we have purchased.

When we play movies how do all our moves show up on Apple TV, The digital copies of DVDs we bought don't show up. Why when we play movies some start to play automatically and others have to load for 2 hours? They both show they are on iCloud.

I would contact iTunes re: digital copies
http://www.apple.com/support/itunes/contact/
There is no accessible storage in the unit, so it will need to load each time. It will start once a portion has buffered, that time depends on your connection.
Check speedtest.net (1080P content needs at least 8mbps)
Check for interference (use istumbler or netsrumbler)
Make sure you are on your ISPs DNS (settings - general - network - DNS - automatic)

Need to load only delta where I receive full initial file all the time

Hi All,
Can any one let me know is there any feature in DS where we can load only delta/updated/changed fileds from the flat file (which is full load)...
Scenario is : system will send all the time full initial load in a flat file format where DS need to load initially all the records later it has to update only the delta changes... So wondering do I need to perform full load in DS all the time or is there any feature to load initially full file and load only updates moving forward?
Thanks
Rajeev

If you are indeed getting a full dump of the entire target table from the source system, every time, you may find it faster to truncate-and-reload your target table, depending on what else (if anything) goes in there, the number and nature of transformations, etc. Running a really large set of records through a Table Comparison transform, comparing on all fields (which it sounds like you'd need to do), can take a while, and given that you've always got "all the records," may be beside the point.
You also may want to investigate the use of checksum fields. It's possible that adding (and, of course, calculating) checksum fields on each row in both the source and target and then comparing those to identify updates would be faster than doing a Table Comparison transform-based comparison of each field, for each record.
Best wishes,
Jeff Prenevost

New gen 4 touch. first time on itunes window comes up needs at least version 10.6.3...i downloaded this but still asks every time and cant load music

New gen 4 touch. first time on itunes window comes up needs at least version 10.6.3...i downloaded this but still asks every time and cant load music

See the futher information area of Troubleshooting issues with iTunes for Windows updates for download advice and direct links if required.
See this migrate iTunes library post for advice on moving the library over from a previous computer and this post on deduplication.
tt2

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Since i upgraded to Mountain Lion, logic 9 gets to checking midi drivers, and locks up on me. it will work sometimes, and most of the time it wont load up, need help

Hi, you can't have a PowerMac, they can't run 10.6, 10.7, or ML/10.8!
Open Console in Utilities & see if there are any clues or repeating messages when this happens.

Map Loader Can't Load maps to 5230 on Mac OSX

When I start Nokia Map Loader application for dowloading maps on Nokia 5230 I get an error message saying :
The following errors occured while transferring files. If the error is not permanent, you can try starting the file transfers again.
config.cfg file couldn't been found. operation forbidden
config.cfg file couldn't been found. operation forbidden
I can't download maps on the phone because the region list is empty (it is not supposed to be).
This happens every time I try to use the Map Loader.There are screenshots of the same problem on another forum: http://betalabs.nokia.com/apps/nokia-map-loader-fo r-mac/bugreport/configcfg-operation-forbidden
Operating system is Mac OSX
Thank you for your help.

Hi all my experience with map loader is similar and I'm hoping for dramatic improvements to enable me to successfully load maps to my 5800MX, apols for the length of my post but I have just spent 12 hours trying to get MAP loader to work and have found and fixed a number of issues that I hope will help some people, I have also found a no of shortcomings in the software and am hoping for Nokia to take note and apply some fixes.
1. I got rid of the config.cfg error message by loading maps on my phone and changing the memory card location to drive E: I then waited for a satellite connection and found location, then connected to my MacAir running 10.6.4 OSX. Prior to running maps on my 5800 I had the config.cfg errors.
2. BEWARE that if you are connecting a phone that has not been synced using nokia MMT before or one that was previously synced but had the music etc deleted (like my 5800 because I formatted the memory card) then initially the NMMT symbol flashes as if it is working, BUT shortly after it will remain static and then the color wheel will appear when you float the mouse over the NMMT icon, this can give the impression of a complete software lock upand in my case only after 2 forced quits and reboots not altering things I decided to leave the MAC in this state , low and behold some 40mins later NMMT started showing a status of music and photo transfer . SO NOKIA please fix this your software appears to be totally hung but it is merely working so something needs resolution in my view as there really is no indication that the software is running and in "force quit" the software shows as not responding.
3. MAP LOADER, - initially upon loading map loader it reported "phone cannot have maps or is not compatible" however this was because my default memory card (on the 5800 maps, settings ,maps, menu) was C: and I had not actually re-run maps after formatting my memory card (see note 1 and 2) . Changing the default memory location in maps on the phone to E: allowed map loader to run. Then I had an issue that the map regions were not showing in the left column, the software simply showed nothing and I had nothing to drag into my phone for upload. This was resolved by getting a faster internet connection. Internet Speed and Reliability - Now (still not resolved) I have a faster internet connection I have loaded MAP loader and have dragged all of the relevant maps to the right. I click on upload/download maps and the software stars the download process but takes an eternity to download maps, last night I left the software for 7 hours and still no maps were downloaded, In addition to this I have to leave my phone connected to my MACAIR the whole time I am attempting to download, so I can't even download maps from nokia and upload them to my phone at a later date. I think this is due to my internet connection speed but I am using bittorrent to frequently download torrents which works fine so it cannot be that bad. So MY REQUEST to NOKIA software development for MAP LOADER is can we please have some software that is designed to run on an internet connection that is less than 500K (it looks like you developed it on a 1GB LAN connection). IE why do I have to connect my phone for MAP loader to start in the first place OR Can't you put an option in the SW to allow the Nokia phone to be disconnected after downloading commences (ie if this is a licensing issue) so I can freely use my phone whilst maps are downloaded on my MACBOOK when Im not in the office ? Could you employ a capability like bittorrent in the downloader so we can download in portions when we have access to the internet ? Why is your MAP loader so slow ? IE I happily download 100M updates to MACOSX and ITUNES over these internet connections but MAP LOADER just WONT WORK, OR works so slowly and cannot recover from slow internet connection states that it is unusable ?
4. As I have a MACAIR I only have one USB port so was hoping to connect my 5800 with Bluetooth so I can run maploader whist I am connected to my USB mobile internet. Unfortunately I was unable to get the MAP loader to recognize my 5800 via bluetooth , I loaded the software , chose use bluetooth and it continually searched with no connection found. This is despite me having the devices paired, I have used bluetooth connections for both isnc (calendar and contacts sync works fine) and for NMMT. NMMT recognized the 5800 bluetooth connection in the dropdown menu but MAP LOADER completely failed to recognize it. NOKIA please allow a BT connection with the nokia 5800 so I can run this combination, OR simply allow me to disconnect my phone whilst I am on the internet downloading my maps, then once maps are on my local MACdrive I can just disconnect from the internet and uploads maps to my phone.
That's it, in short MAP Loader for MACOSX 10.6.4 seems unworkable in its current form unless your connected to an 8M internet connection or the Nokia development LAN. Please fix ASAP

Need to load only few sales orders from ecc to bi 7?

Hi all,
there were couple of sales orders is missing for a particular day? we need to load it. there was deltas from the psa to the ods.
how to load from psa to the ods when there is deltas!. using the dtp?
what is the process to carry out loading a particular records from the psa to the ods without affectingthe deltas in bi 7?
can anyone pls help me on this!!
Thanks
pooja

Hi Pooja,
Have you loaded any data to DSO till now?
If not i hope you might be having two requests in PSA if you have done one Full & one Delta load in Infopackage??
(or) might be one if you have done only one Full Load.
Follow these steps if you have notyet loaded any data to DSO:-
Now create a DTP> right click on the DTP folder>create DTP--> here you can either select FULL or DELTA load since everything will be DELTA for the first time & all the data will be loaded.
Follow this if you already having any requests in DSO:-
You might have done FULL DTP for the first time
So now create a net DELTA DTP & Execute so that only new Delta records will be loaded.
Hope it helps!
Regards,
Pavan

I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will cbe recognised... any ideas?

I cannot get my new Ipad to be recognised in ITunes so I can Sync my library... I have re-loaded Itunes 64bit but it still comes up with an error saying that I need to load Itunes 64 bit before this Ipad will be recognised... any ideas?
I just found that I can't Sync my Iphone either and it gave the same error code.... it must be a ITunes problem.
Message was edited by: stephenfromwandi

chicx wrote:
This is the third time of writing this on your Apple Support Communities!
Not with your current user id.
Far too much uneccesary information in your post, which only confuses things, a vast amount!
Let's start with iTunes.
Have you updated iTunes to 11.1.5, because the previous version did appear to have an issue about seeing iPods?
With iTunes 11.1.5 installed, look in Edit/Preferences/Devices, (or use the ALT key, followed by the E key and then the F key) and make sure that the box named Prevent iPods, iPhones and iPads from syncing automatically does not have a tick in the box.
Once you have doen those two things, check to see if the iPod is seen by iTunes.
chicx wrote:
By the way, what does IOS mean? (I thought IO stood for operating system, but am flummoxed by the S on the end.
Really?
OS stands for Operating System. (In computer speak, IO means Input/Output.)
iOS originally stood for iPhone Operating System, but it now refers to the iPod Touch and iPhone. The iPod Classic, which you have listed in your profile as your iPod, does not use iOS.
I assume that you have been listening to the Podcast in your iTunes on the computer as you cannot transfer it to your iPod. It's what I'd do.

Bug Report: DW CS5.5 Crashes Every Time On An Image Map

I am posting this in lieu of contacting Adobe support. I went to my account to send Adobe a bug report and was told I needed to contact support via phone. That's pretty crappy. As a licensed user who's owned it less than three months, there's no direct path to tell you guys that your software is broken?
Here's the deal: I am working on an HTML landing page with one image map attached to one image. Literally, every time I make a modification to the code near the image (tied to the image map) then click into the live preview window, Dreamweaver CS5.5 crashes like a 70-year old on a bar of soap on the floor of the shower. It crashes hard. My only relief is to save the file before clicking into the live preview window. That's my only workaround to the problem.
But I'm left amazed that I can crash it every single time over an image map, flicking from the code to the preview pane. You would think that at version 11.5, a minor thing like that wouldn't hemorrage the supposed creme de la creme of web design software.
Here's the code I'm editing that causes it to crash:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
          <?php
          require_once("/var/www/html/c/index.php");
          $recip_name = $subscriber['first_name'].' '.$subscriber['last_name'];
          ?>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<link href="/c/print.css" type="text/css" rel="stylesheet" media="print">
<title>Membership Special - No Commitment</title>
</head>
          <?php // Google Link Tracking Code ?>
          <script type='text/javascript' src='/c/google-analytics-code.js'></script>
          <?php // End Google Link Tracking Code ?>
    
          <link rel="stylesheet" type="text/css" href="http://yui.yahooapis.com/2.9.0/build/reset/reset-min.css">
    <style type="text/css">
                    body {font:normal 14px/1.25em Georgia, "Times New Roman", Times, serif;}
                    h1,h2,h3,h4,h5,h6 {font-weight:bold;color:#333333;}
                    h1 {font:normal 28px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
                    h2 {font:normal 24px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
                    h3 {font:normal 20px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
                    h4 {font:normal 16px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
                    h5 {font:normal 12px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
                    h6 {font:normal 8px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
                    a, a:link, a:visited, a:active {color:#0055FF;}
                    a:hover {color: #002AFF;}
                    #wrapper {margin:0 auto;width:432px;}
                    #header, #footer {margin:20px auto;text-align:center;position:relative;}
                    #footer {margin:40px auto;}
                    #coupon {position:relative;}
                    #coupon, #coupon img {margin:0 auto;text-align:center;}
                    .personalization {position:absolute;width:100%;text-align:center;text-transform:uppercase;}
                    .printcoupon {text-transform:uppercase;}
          </style>
<body>
<div id="wrapper">
<div id="header">
          <h3 class="printcoupon"><a href="javascript:window.print();">Click here to print your coupon</a></h3>
</div>
<div id="coupon">
          <img src="images/19415coupon-01.jpg" width="432" height="432" />          
<img src="images/19357coupon-02.jpg" width="550" height="602" usemap="#imagemap" class="dontprint"/>
</div>
<div id="footer">
          <h3 class="printcoupon"><a href="javascript:window.print();">Click here to print your coupon</a></h3>
</div>
</div>
<map name="imagemap">
          <area coords="29,69,521,197" shape="rect" href="javascript:window.print();">
          <area coords="29,212,521,339" shape="rect" href="http://www.google.com" target="_blank" onClick="recordOutboundLink(this, 'Landing Page', 'http://www.google.com');return false;">
                    </map>
</body>
</html>

Bug Report and Feature Request https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

How can i control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?

Sup buddies,
How can I control what images load on my project to save preload time and avoid loading all images, elements, divs not yet visible?
As the project grows in size the load time increases. How does one control not loading all images ,divs,elements etc. until they're
needed on the timeline? For example some sections are off and only become visible when recalled. My projects slowly grow in size so loading
all images , is counter productive . My other option would be to create separate htmls but that breaks the seamless user experience .
TY...Over N Out...

hello, kiwi
quote: "Is there an easy way to burn a completed project to DVD, but keep only the (lo res, lo size) previews on my hard drive?"
yes.
maybe,...
1. you might think of making DVD backups first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
or,
2. bring in the photographs to hard drive first prior to importing the photos into Aperture. "Store Files: In their current location" once in Aperture make low rez Previews, and export finished Project.
the low rez Previews will stay in Aperture but the high quality Versions will be exported onto DVDs and gone from the hard drive (if you delete the originals).
another way would be to export small about 50-70 pixel wide high quality jpegs to a folder on your Desktop and import & keep these in Aperture Library as a reference. make metadata to show where the original Project DVDs are stored and DVD filing system used.
victor

Every time I sync my iphone 4 with itunes my ring custom ring tones change. I have 7 custom ring tones in itunes. One time it will load 1 custom ring tone the next it may be 3 then the next it is one again. The last time it gave me 4 of the 7.

Every time I sync my iPhone 4 with iTunes the number of my custom ring tones change. I have 7 custom ring tones listed. The first time it will load 1 of the ring tones and the next time it will load 3, The next time it will be back to 1. If I have assigned one of the custom ring tones and it does not get loaded it goes back to the ring tone that came with the phone. The last time itunes gave me 4 of the 7 so I have not tried to sync it again. I am using iTunes 10 (10.4.10), and windows 7.
Has anyone else had this problem??
Any ideas to what I need to do??

Have you ever had all 7 of them synced before? Are these ringtones you made yourself? Is there a chance they could exceed 30 seconds in length? Is there a chance you have moved the original file location on the computer? May need the answers to a couple more questions to try and determine an answer.

JAVA, sqlserver - Need to load an image from the sql server database

hi,
I need to load an image from the sql server database using java. I have connected to the database and getting all other records except the records for a photo (datatype = LONGVARBINARY) and Remarks (datatype = LONGVARCHAR).
I am using java and sql server db. The photo and remarks are stored in the db. and i need to show the image and the remarks fetching them from there.
I get the error :
Thread-9 org.hibernate.MappingException: No Dialect mapping for JDBC type: -1
How can I achieve this?
Thanks,
Gargi

Exactly. And are you using MySQL?
No. You are using Microsoft SQL server if I have to believe your initial post. A quick google tells me that the dialect class to use is:
org.hibernate.dialect.SQLServerDialect

Need to load data from source .CSV files to oracle target database.

Hi,
This is the my scenario
I have .CSV files in ftp folder and need to load the data into target tables.
For that i need to create package and load the data into daily basis.
But some time .csv file name will vary daily basis.
can you any one suggest me???
Thanks in Advacne.
Zakeer

Dear Roy,
Thanks for your response
Now I am able to extract the .zip file OdiUnZip (file). and loading data into target this is chapping in static way
and my scenario is that some time i will get .zip files with different names with different .csv files
i need to dynamically find the new .zip file and extract it and load the data into target.
Please advice me..
Thanks in advance
Zakeer

A little help needed in message mapping

a little help needed in message mapping
I have to map one of the idoc header segments as many times as it occurs to each Idoc when using the split message funcionality
let us say we have the segment seg1 and there is a QUALF in it
<seg1>
<qualf>001</qualf>
</seg1>
<seg1>
<qualf>002</qualf>
</seg1>
then we use the vbeln to split the idoc into 2.
so if we have
<vbeln> 1 </vbeln>
and
<vbeln>2 </vbeln>
then 2 Idocs should be created like this
<Idoc>
<vbeln> 1 </vbeln>
<seg1>
<qualf>001</qualf>
</seg1>
<seg1>
<qualf>002</qualf>
</seg1>
</Idoc>
<Idoc>
<vbeln> 2 </vbeln>
<seg1>
<qualf>001</qualf>
</seg1>
<seg1>
<qualf>002</qualf>
</seg1>
</Idoc>
it is easy to create the segment by using createif with the QUALF field but my problem how to map the qualf twice for each idoc
Thanks.

UseOneAsMany is the function you need to use.
It takes three parameters:
1 --- The node you want to duplicated
2 --- How many times you want to duplicated
3 --- The context you want to place for it.
Regards
Liang

Need of value mapping and fixed values in (conversions)under graphical map

hi.
helo all.
i just want to know what is the need of value mapping and fixed values in (conversions)under graphical mappping.
can any body explain me with real time example .
waiting for your response.
bye.
regards.
seeta ram.

Hi Seetha Ram,
Value mapping: Where we maintain a table of values which are mapped.
based on the incoming value we can send the respective resultant value.
for Eg: for language SAP maintains as EN --> English etc
can u refer these
http://help.sap.com/saphelp_nw04/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm
Re: Value mapping table
Thanks and Regards
Harsha Vardhan.P
**Reward points if found useful**

Time needed to load maps?

Similar Messages

Maybe you are looking for