Time not accurate on iPad??
My iPhone and my iPad do not agree on the time of day. I set them both up in the same time zone and reset both devices. The iPad thinks it is five minutes ahead of the phone. I believe the phone gets the time from the cell towers and the wifi iPad? Who knows where the time comes from... (or goes, for that matter)? Both are set to get the time automatically. How does the iPad get the currect time and do I have to manually control iy for it to be accurate? Both seemed to convert to standard time ok.
You can set the date and time from:
Settings > General > Date & Time and then Time Zone and Set Date & Time.
That way you can correct the time if it is off, and the iPad knows from the selected time zone when to switch from daylight savings to standard time...along with the time zone for the specified location.
Set correctly initially, the iPad should keep the time pretty accurately. Not sure what would happen if you managed to some how succeed in completely draining the battery. If you follow the Apple battery conditioning/charging procedure you do not actually completely drain the battery. The unit auto shuts down at about 1% charge. That keeps certain info in memory.
Similar Messages
-
Not wanting my external drives to spin down every ten minutes (actually eight minutes), I reset the the disk sleep interval with the sudo pmset command or with TextWrangler. Oddly enough, I found that this works but is not accurate. Setting the time for 30 minutes would allow my disks to spin down after only 23 minutes. At a 60 minute setting, they would spin down in about 44 minutes. They seem to spin down anywhere from 70% to 80% of the value set. Has anyone else experienced this? Anyone know why?
Not wanting my external drives to spin down every ten minutes (actually eight minutes), I reset the the disk sleep interval with the sudo pmset command or with TextWrangler. Oddly enough, I found that this works but is not accurate. Setting the time for 30 minutes would allow my disks to spin down after only 23 minutes. At a 60 minute setting, they would spin down in about 44 minutes. They seem to spin down anywhere from 70% to 80% of the value set. Has anyone else experienced this? Anyone know why?
-
Ipad 3 usage stats (time) not accurate
I've an iPad 3rd gen running 6.0.1.
I've noticed in the last couple of weeks that the usage stats "Time since last full charge" seems completely inaccurate.
I charged it fully overnight on Monday and took it off charge at around 8am Tuesday. It's telling me that standby is 2 days 13 hours. Pretty accurate there.
However, it's telling me that the usage time is 7 hours 13 minutes. I'm currently at 89%.
I've actually only used it for a couple of hours max which seems to match the 89% left figure.
Nothing is set to push. My email is set to only fetch manually. I've got nothing turned on in the way of notifications and location services are turned off.
Anyone else experiencing this before I do a restore?
Anyone else have any suggestions as to why this figure is wrong?
TIA,
Si.Just checked my ipad again this morning after a full charge. After going into the Usage screen, all my stats remained along with the message about it being plugged in since full charge. At that point the stats reset. I cannot say for sure whats different but I have never gone into the usage screen when its been fully charged.
-
Travel Time Not Showing on iPad
When I look on my phone, iCal blocks off my travel time so I know at a glance that I can't schedule anything there. However, I bought a new iPad mini tonight and it does not show the travel time blocked off. It will calculate the travel time and show me how long it will take if I select the appointment. But it won't show me travel time in the week view. What am I missing??
So how do we get this message to the wizards that need to do a bit more programming work? Travel time (which was around years ago and suddenly disappeared about 4 OS's ago) is super. But markroos is right: If it doesn't show up on the mobile devices we love, it is useless. Because, duh, we don't take our iMacs on the road with us, do we?
-
When i set up my Ipad i used my same apple ID that i use on my macbook. The problem is when i try to facetime from the Ipad to the Macbook, it thinks its the same device. How can i resolve this?
See here http://ipad.about.com/od/iPad_Guide/ss/How-To-Use-FaceTime-On-The-iPad_2.htm
-
Should there be a option to reset seconds when adjusting the time?
Hi rohit,
what a professional screenshot with that news ticker in front
"some of the functions"
The picture from vt is a snippet which you can drop onto your blockdiagram... And there is only one function: BuildWaveform...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
My ipad Home button is some time not working
my ipad Home button is some time not working
Try here > iPad: Not responding or does not turn on
Apple - Support - iPad - Hardware Service -
Render Times on FCP Not Accurate?
Hi, <- My casual Greeting
Hopefully there are a few video editors out there on the forum... cause this one is program specific....
So I have been an avid Final Cut Pro guy for the last 4 years. I love the program.... I can work very easily in it but recently I got a new job in which I have been using both FCP and Adobe Premier.
Here is my issue... I have been using files that come in as MPEG 2 and have been using MPEG Streamclip to convert them over to a ProRes file for FCP. From FCP I have had to export them into 3 formats
1. Mpeg 4 (the file format our website takes)
2. FLV (Format for online video sites)
3. QuickTime (XDCAM) for our tricaster
The last week I have been using FCP and my render times have been (for a 5 min clip)
1. Mpeg 1 hour+
2. FLV 20 min+
3. QuickTime (XDCAM) 1 hour +
Yesterday I was told to use Premier as my boss uses Premier on a regualr basis and I assured him that the times would be the same as FCP is a Mac native program and that Premier was made to work on a mac but is essentially a PC program (I am eating my words now)...
I redid the renders on the same file...
On premier the render times were
1. Mpeg 30+ min
2. FLV 12 min
3. QuickTime (XDCAM) 40 min
Why is this? Do I just have something really messed up in my settings that FCP is not rendering quickly and Premier is? I would hate to have to hop over to Premier... I enjoy using FCP way to much.
The other question I have is why are FCP render times not accurate...
The renders will start saying 5 min then 10 then an hour etc.... and the time will not be accurate. If it says 5 min it may go for an hour... or if it says an hour it may just complete while still telling me I have an hour to wait.
Adobe Premier, right off the bat, will tell me the frame it is on and the percent and time left... almost to the T.
If possible... please help me get my fcp back on the right track.
TimRendering can be much faster if you have a multi core intel Mac and you use Qmaster with Quick Clusters.
Here's how.
Set up Quick Clusters in Qmaster. (A description of how to do this is in the manual and also can be found in the Qmaster forum here in the Apple discussions as well as out on the web.)
Export your sequence from FCP using "current settings". (Do NOT use Quicktime Conversion!)
Open up Compressor and submit your file. Add the three output elements.
Submit the file and click "use unmanaged services"
Go have a cup of coffee while all the cores chug away at things. I guarantee it will be faster than the way you are currently exporting (if you aren't using clusters)
x -
Cannot Wi-Fi Sync iPad; Appears to see iMac but iMac does not see the iPad
Like many, I have upgraded my iPad (1st Gen) to iOS 5 and for the most part, it's been an easy transistion to learn the new features. However, I've not been able to overcome a Wi-Fi Sync issue.
The iPad does recognize that it can Wi-Fi Sync with my iMac.
When it was connected via cable, I had already selected the "Sync with this [iOS device] over Wi-Fi" Option in iTunes then clicked "Apply."
Under Settings > General > iTunes Sync on my iPad, the "Sync Now" button is grey when I connect to an alternate Wi-Fi network in our house, but when I am on the same Wi-Fi network as my computer, through an Apple Airport Extreme Basestation, the "Sync Now" button becomes actively black as it if recognizes my iMac, but it does not show up under iTunes to sync.
I connected the iPad to an alternate computer which is linked to iPhone running iOS 5 on the alternate Wi-Fi Network I spoke of earlier and through which we succesfully Wi-Fi Synced, but when my iPad was linked to this same computer (connected first by cable to enable "Sync with this [iOS device] over Wi-Fi" Option in iTunes first, it still would not show my iPad. And this time, not even my iPad would see the computer when on the same network, yet I could also see the iPhone mentioned which was upstairs.
I have tried following the steps in this Help Page (http://support.apple.com/kb/TS4062) but without any change. The only thing I haven't followed to the letter is restarting my router. I did tell my Airport Basestation to restart via the Airport Utility.
Has anyone else yet experienced this issue and been able to resolve it? Please share any insight.When one device can't see another via Bonjour, it suggests a problem with how the network or the devices are handling "multicast" packets. Handling multicasts is tricky on Wi-Fi. Is there any way you can temporarily plug the iMac into the LAN port of the base station via an Ethernet cable, and try the sync that way? If that works, then it's a clear indication of multicast problems on your network.
Apple is usually very good about making sure multicasts work reliably on AirPort base stations and all Macs and iOS client devices. It would be interesting to know which generation of AirPort Extreme you have, what firmware version you're running on it, exactly which wireless security mode you're using (for instance, WPA2 "mixed mode", where both WPA2-style AES-CCMP and original WPA-style TKIP encryption are available, is trickier for multicasts because multicasts have to use a different cipher and key. "WEP TSN" is also tricky for similar reasons). Oh, and what you have your "multicast rate" set to on your base station. -
Timer Class not accurate and slows down my animation!?
Does anyknow how why my timer object is not accurate and why it slows down my animation that is also present on my GUI at the same time?
I have a timer in the form of 0.00 the left of the decimal point should represent a second but it doesnt, run my code and see for yourselves. below is my code if anyone can fix these 2 problems i will be very thankfull:
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.awt.Shape;
import java.io.*;
import java.text.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.Timer;
import java.sql.*;
import java.text.*;
public class RT extends JFrame implements MouseMotionListener
//declares a number of swing componets to be used for the JFrame
private JTextArea infoJTextArea;
private JPanel showJPanel, startJPanel, helpJPanel, resultsJPanel;
private JLabel de4JLabel, de3JLabel, mainTitleJLabel, nameJLabel, ageJLabel,
deJLabel, de1JLabel, de2JLabel, timeJLabel,nameResultJLabel,
ageResultJLabel, timeResultsJLabel, ratingJLabel, coJLabel, shJLabel;
private JTextField nameJTextField, ageJTextField,nameResultJTextField,
ageResultsJTextField, timeResultsJTextField, ratingJTextField;
private JButton exitJButton, showJButton, loginJButton, startTestJButton,
tempObjectJButton;
private JScrollPane scroll;
public JComboBox colourJComboBox, sizeJComboBox, shapeJComboBox, speedJComboBox;
private static Connection dbcon;
int temp=0;
private String[] col = { "Red", "Blue", "Green","Yellow","Orange","Black"};
private String[] shapeA = { "Normal Rectangle", "Normal Circle", "Normal Oval","BIG Rectangle", "BIG Circle","BIG Oval","small rectangle","small circle", "small oval"};
private String[] speed = { "Fast", "Normal", "Slow"};
public int checking;
static int flag, flagshape, flagspeed;
// creates and sets up a number of varibles to be used by the class
public long timeLimit = 0;
DecimalFormat timeDec = new DecimalFormat (":00");
public int age;
public String name, shapeChoice="Normal Rectangle(Never selected anything)", colourChoice="Black(Never selected anything)";
private Timer TimeNow;
private JTextField timerJTextField;
ShapeMovingPanel testJPanel;
Random seed;
Shape shape;
Shape[] shapes = {new Rectangle2D.Double(50, 30, 75, 25),new Ellipse2D.Double(175, 125, 50, 50),new Ellipse2D.Double(90, 100, 75, 35),new Rectangle2D.Double(50, 30, 175, 125),new Ellipse2D.Double(175, 125, 125, 125),new Ellipse2D.Double(90, 100, 175, 135),new Rectangle2D.Double(50, 30, 55, 15),new Ellipse2D.Double(175, 125, 20,20),new Ellipse2D.Double(90, 100, 55, 15)};
//50, 30, 75, 25 change starting point here****************************************
public RT() // constructor method
seed = new Random();
shape = shapes[0];
//sets up the Timer
TimeNow = new Timer((1), new TimerListener());//++++++++++++++++++++++++++timer -17
createUserInterface(); // method that creates the user interface
private void createUserInterface()
new Thread(new Runnable()
public void run()
String results = "";
int count = 0;
boolean journeyOn = true;
while(journeyOn && count < 3)
try
Thread.sleep(1000);
catch(InterruptedException ie)
System.err.println("show interrupt: " + ie.getMessage());
journeyOn = false;
results += count++ + ", ";
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
dbcon = DriverManager.getConnection("jdbc:odbc:CMT3991", "", ""); // Access/ODBC
//connection ash used to connect to the user table in access
} catch(Exception eee)
eee.printStackTrace(); //exception if error occurs during the driver connection
System.out.println("* UserDA CONNECTED *");
}).start();
Container contentPane = getContentPane();
contentPane.setLayout( null );
// set up infoJTextField
infoJTextArea = new JTextArea();
infoJTextArea.setBounds( 20, 420, 550, 170 );
infoJTextArea.setEditable( false);
infoJTextArea.setText("\n Welcome to the reaction testing program, this " +
"program is designed to test your reactions in a \n"+
" number of different situations.\n"+"\n Please " +
"enter your name and age, or select show previous results.");
contentPane.add( infoJTextArea );
scroll = new JScrollPane(infoJTextArea);
scroll.setBounds( 20, 420, 550, 170 );
contentPane.add( scroll );
startJPanel = new JPanel();
startJPanel.setBounds( 16,16, 560, 375 );
startJPanel.setBorder(
new TitledBorder( "WELCOME - PLEASE ENTER YOUR NAME AND AGE:" ) );
startJPanel.setLayout( null );
contentPane.add( startJPanel );
//sets up a JPanel
mainTitleJLabel = new JLabel();
mainTitleJLabel.setIcon( new ImageIcon( "title.png" ) );
mainTitleJLabel.setBounds( 30, 10, 520, 170 );
mainTitleJLabel.setHorizontalAlignment( JLabel.CENTER );
startJPanel.add( mainTitleJLabel );
//creates a newJLabel
nameJLabel= new JLabel();
nameJLabel.setBounds( 52, 200, 70, 35 );
nameJLabel.setText("Name:");
startJPanel.add( nameJLabel);
//creates a new JTextField
nameJTextField = new JTextField();
nameJTextField.setBounds( 130, 200, 300, 24 );
startJPanel.add( nameJTextField );
//creates a newJLabel
ageJLabel = new JLabel();
ageJLabel.setBounds( 52, 245, 100, 35 );
ageJLabel.setText("Age:");
startJPanel.add( ageJLabel );
//creates a new JTextField
ageJTextField = new JTextField();
ageJTextField.setBounds( 130, 245, 300, 24 );
startJPanel.add( ageJTextField );
//creates a JButton
loginJButton = new JButton();
loginJButton.setBounds( 440, 200, 90, 24 );
loginJButton.setText( "Login" );
loginJButton.setBackground( Color.YELLOW );
startJPanel.add( loginJButton );
loginJButton.setEnabled(true);
// loginJButton.setVisible(true);
loginJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
// not necessary to pass events to these methods...
Login(); // calls the Login method
//creates a JButton
showJButton = new JButton();
showJButton.setBounds( 200, 320, 180, 24 );
showJButton.setText( "Show previous results" );
showJButton.setBackground( Color.YELLOW );
startJPanel.add( showJButton );
showJButton.setEnabled(true);
// showJButton.setVisible(true);
showJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
showData(); // calls the showData method
//sets up a JPanel
showJPanel = new JPanel();
showJPanel.setBounds( 16,16, 560, 375 );
showJPanel.setBorder(new TitledBorder( "PREVIOUS RESULTS:" ) );
showJPanel.setLayout( null );
contentPane.add( showJPanel );
//sets up a JPanel
helpJPanel = new JPanel();
helpJPanel.setBounds( 16,16, 560, 375 );
helpJPanel.setBorder(
new TitledBorder( "CHOOSE A NUMBER OF OPTIONS AND GET READY:" ) );
helpJPanel.setLayout( null );
helpJPanel.setVisible(false);
contentPane.add( helpJPanel );
//creates a newJLabel
deJLabel= new JLabel();
deJLabel.setBounds( 23, 390, 530, 35 );
deJLabel.setText("Details:");
contentPane.add( deJLabel);
//creates a newJLabel
coJLabel= new JLabel();
coJLabel.setBounds( 70, 40, 530, 35 );
coJLabel.setText("Choose a colour:");
helpJPanel.add( coJLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds( 25, 100, 530, 35 );
de1JLabel.setText("You are about to start the reaction test, when you " +
"press the start button it will begin.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds(160, 145, 530, 35 );
de1JLabel.setText("Simply catch the moving item and click.");
helpJPanel.add( de1JLabel);
colourJComboBox = new JComboBox( col );
colourJComboBox.setBounds( 70, 70, 135, 21 );
colourJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( colourJComboBox );
colourJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
colourChoice="Black";
int x = colourJComboBox.getSelectedIndex();
if( x == 0)
flag = 1;
colourChoice="Red";
else if(x == 1)
flag = 2;
colourChoice="Blue";
else if(x == 2)
flag = 3;
colourChoice="Green";
else if(x == 3)
flag = 4;
colourChoice="Yellow";
else if(x == 4)
flag = 5;
colourChoice="Orange";
else if(x == 5)
flag = 6;
colourChoice="Black";
shJLabel= new JLabel();
shJLabel.setBounds( 340, 40, 530, 35 );
shJLabel.setText("Choose a shape and size:");
helpJPanel.add( shJLabel);
shapeJComboBox = new JComboBox( shapeA );
shapeJComboBox.setBounds( 340, 70, 135, 21 );
shapeJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( shapeJComboBox );
shapeJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
int xshape = shapeJComboBox.getSelectedIndex();
//shapeChoice="Normal Rectangle";
if( xshape == 0)
{ flagshape = 1;
shapeChoice="Normal Rectangle";
else if(xshape == 1)
{ flagshape = 2;
shapeChoice="Normal Circle";
else if(xshape == 2)//**********here
{ flagshape = 3;
shapeChoice="Normal Oval";
else if(xshape == 3)
{ flagshape = 4;
shapeChoice="BIG Rectangle";
else if(xshape == 4)
{ flagshape = 5;
shapeChoice="BIG Circle";
else if(xshape == 5)
{ flagshape = 6;
shapeChoice="BIG Oval";
else if(xshape == 6)
flagshape = 7;
shapeChoice="small rectangle";
else if(xshape == 7)
{ flagshape = 8;
shapeChoice="small circle";
else if(xshape == 8)
{ flagshape = 9;
shapeChoice="small oval";
/* speedJComboBox = new JComboBox( speed );
speedJComboBox.setBounds( 10, 150, 135, 21 );
speedJComboBox.setMaximumRowCount( 3 );
helpJPanel.add( speedJComboBox );
speedJComboBox.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
int xspeed = speedJComboBox.getSelectedIndex();
if( xspeed == 0)
flagspeed = 1;
else if(xspeed == 1)
flagspeed = 2;
else
flagspeed = 3;
System.out.println(flagspeed);
//creates a newJLabel
de2JLabel= new JLabel();
de2JLabel.setBounds( 20, 380, 70, 35 );
de2JLabel.setText("Details:");
helpJPanel.add( de2JLabel);
//creates a JButton
startTestJButton = new JButton();
startTestJButton.setBounds( 185, 205, 180, 60 );
startTestJButton.setText( "START" );
startTestJButton.setBackground( Color.YELLOW );
helpJPanel.add( startTestJButton );
startTestJButton.setEnabled(true);
// startTestJButton.setVisible(true);
startTestJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
startTest();
//sets up an animation panel
testJPanel = new ShapeMovingPanel(this);
testJPanel.setBounds( 16,16, 560, 375 );
testJPanel.setBorder(new TitledBorder("Click the moving object:"));
testJPanel.setLayout( null );
testJPanel.setVisible(false);
contentPane.add( testJPanel );
testJPanel.addMouseMotionListener(this);
//creates a newJLabel
timeJLabel = new JLabel();
timeJLabel.setBounds( 440, 330, 100, 35 );
timeJLabel.setText("Time:");
testJPanel.add( timeJLabel );
//creates a new JTextField
timerJTextField = new JTextField();
timerJTextField.setBounds( 480, 335, 60, 24 );
timerJTextField.setText(String.valueOf(timeLimit));
timerJTextField.setHorizontalAlignment(JTextField.CENTER );
timerJTextField.setEditable(false);
timerJTextField.setBackground( Color.YELLOW );
testJPanel.add( timerJTextField );
resultsJPanel = new JPanel();
resultsJPanel.setBounds( 16,16, 560, 375 );
resultsJPanel.setBorder(new TitledBorder("HERE ARE YOUR RESULTS:"));
resultsJPanel.setLayout( null );
resultsJPanel.setVisible(false);
contentPane.add( resultsJPanel );
de3JLabel= new JLabel();
de3JLabel.setBounds(20, 200, 530, 35 );
de3JLabel.setText("Below is also the movements you made with your mouse, " +
"you may exit the program now.");
resultsJPanel.add( de3JLabel);
de4JLabel= new JLabel();
de4JLabel.setBounds(135, 245, 530, 35 );
de4JLabel.setText("Thank you for trying the Reaction Testing program");
resultsJPanel.add( de4JLabel);
//creates a newJLabel
nameResultJLabel= new JLabel();
nameResultJLabel.setBounds( 62, 55, 50, 35 );
nameResultJLabel.setText("Name:");
resultsJPanel.add( nameResultJLabel);
//creates a new JTextField
nameResultJTextField = new JTextField();
nameResultJTextField.setBounds( 140, 55, 300, 24 );
resultsJPanel.add( nameResultJTextField );
nameResultJTextField.setEditable(false);
//creates a newJLabel
ageResultJLabel = new JLabel();
ageResultJLabel.setBounds( 62, 90, 100, 35 );
ageResultJLabel.setText("Age:");
resultsJPanel.add( ageResultJLabel );
//creates a new JTextField
ageResultsJTextField = new JTextField();
ageResultsJTextField.setBounds( 140, 90, 300, 24 );
resultsJPanel.add( ageResultsJTextField );
ageResultsJTextField.setEditable(false);
//creates a newJLabel
timeResultsJLabel = new JLabel();
timeResultsJLabel.setBounds( 62, 125, 100, 35 );
timeResultsJLabel.setText("Time taken:");
resultsJPanel.add( timeResultsJLabel );
//creates a new JTextField
timeResultsJTextField = new JTextField();
timeResultsJTextField.setBounds( 140, 125, 300, 24 );
resultsJPanel.add( timeResultsJTextField );
timeResultsJTextField.setEditable(false);
//creates a newJLabel
ratingJLabel = new JLabel();
ratingJLabel.setBounds( 62, 160, 100, 35 );
ratingJLabel.setText("Your Rating:");
resultsJPanel.add( ratingJLabel );
ratingJTextField = new JTextField();
ratingJTextField.setBounds( 140, 160, 300, 24 );
resultsJPanel.add( ratingJTextField );
ratingJTextField.setEditable(false);
//creates a JButton
exitJButton = new JButton();
exitJButton.setBounds( 235, 310, 90, 24 );
exitJButton.setText( "Exit" );
exitJButton.setBackground( Color.WHITE );
resultsJPanel.add( exitJButton );
exitJButton.setEnabled(true);
exitJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when exitJButton is pressed
public void actionPerformed( ActionEvent event )
System.exit(0); //closes the programme
}); // end anonymous inner class
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// set properties of application's window
setTitle( "Reaction Tester - CMT3991" ); // set JFrame's title bar string
//setSize( 1280,995 ); // set width and height of JFrame
setSize( 608, 650 ); // set width and height of JFrame
setVisible( true ); // display JFrame on screen
//** set up of method main */
public static void main( String[] args )
RT application = new RT();
application.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
} // end method main
* action listener for TimeNow Timer
private class TimerListener implements ActionListener
public void actionPerformed(ActionEvent event)
timeLimit ++;
if (timeLimit==100)
temp++;
timeLimit=0;
timerJTextField.setText(String.valueOf(temp +""+timeDec.format(timeLimit)));
private void Login()
try
name = nameJTextField.getText();
age = Integer.parseInt(ageJTextField.getText());
startJPanel.setVisible(false);
showJPanel.setVisible(false);
helpJPanel.setVisible(true);
infoJTextArea.setText("\n Welcome "+name+" you will soon know how " +
"fast your reactions are.");
catch (NumberFormatException exception)
JOptionPane.showMessageDialog(this,
"There is either a blank field or a number hasn't been entered",
"Input Type error", JOptionPane.ERROR_MESSAGE);
//shows this is something has been entered wrong
private void startTest()
helpJPanel.setVisible(false);
// System.out.println(""+ seed.nextInt(shapes.length));
//shape = shapes[seed.nextInt(shapes.length)];//****************************
if (flagshape==1)
shape = shapes[0];// changed colour here***************************
else if (flagshape==2)
shape = shapes[1];// changed colour here***************************
else if (flagshape==3)
shape = shapes[2];// changed colour here***************************
else if (flagshape==4)
shape = shapes[3];// changed colour here***************************
else if (flagshape==5)
shape = shapes[4];// changed colour here***************************
else if (flagshape==6)
shape = shapes[5];// changed colour here***************************
else if (flagshape==7)
shape = shapes[6];// changed colour here***************************
else if (flagshape==8)
shape = shapes[7];// changed colour here***************************
else if (flagshape==9)
shape = shapes[8];// changed colour here***************************
// shape = shapes[8];
System.out.println(shape.toString());
testJPanel.setShape(shape);
testJPanel.setVisible(true);
testJPanel.start();
infoJTextArea.setText("");
TimeNow.start();
* called by animation panel after shape is clicked
public void stop()
TimeNow.stop();
movingObject();
* this will compete with your animation
* ie, it will slow it down or make it appear jerky
public void mouseMoved(MouseEvent e)
saySomething("\n Mouse moved", e);
public void mouseDragged(MouseEvent e)
saySomething("\n Mouse dragged", e);
void saySomething(String eventDescription, MouseEvent e)
infoJTextArea.append(eventDescription
+ " (" + e.getX() + "," + e.getY() + ")");
infoJTextArea.setCaretPosition(infoJTextArea.getDocument().getLength());
private void movingObject()
TimeNow.stop();
//timeLimit;
testJPanel.setVisible(false);
resultsJPanel.setVisible(true);
nameResultJTextField.setText(name);
ageResultsJTextField.setText(String.valueOf(age)+" years old");
System.out.println("shape used: "+shapeChoice);
String mouse = infoJTextArea.getText();
String tick = timerJTextField.getText();
timeResultsJTextField.setText(tick);
try
// create a file called welch.txt
final FileWriter outputFile = new FileWriter("Backup_of_"+name+"s_results.txt", true);
final BufferedWriter outputBuffer = new BufferedWriter(outputFile);
// converts data to a formatted string
final PrintWriter printstream = new PrintWriter(outputBuffer);
printstream.println("THIS IS A BACKUP");
printstream.println("The person's name is: "+name);
printstream.println("There age is: "+age);
printstream.println("Time taken: "+tick+" seconds");
printstream.println("The Shape and size was: "+shapeChoice);
printstream.println("It's colour was: "+colourChoice);
printstream.println("The mouse moved as follows: "+mouse);
//states what needs to be printed to the new file
printstream.close(); // closes teh printstream
catch(IOException eio)
//catchs the IO exception
if(temp<5.00)
ratingJTextField.setText("Thierry Henry");
else if(timeLimit<=10)
ratingJTextField.setText("Average");
else if(timeLimit<=15)
ratingJTextField.setText("You gotta be fat or something");
else if(timeLimit<=20)
ratingJTextField.setText("See a doctor");
else if(timeLimit>20)
ratingJTextField.setText("DO YOU KNOW WHAT YOU DOING!?");
String rate=ratingJTextField.getText();
try
Statement st = dbcon.createStatement();
String cmd = "INSERT INTO users (Name, Age, Time_Taken, Rating, Mouse_Movement,Shape_and_Size, Shape_Colour) VALUES ('" + name + "' , " + age + " , '" + tick + "' , '" + rate+"','"+ mouse+"','"+ shapeChoice+"','"+ colourChoice+"');";
//creates a SQL statement and executes it
st.executeUpdate(cmd);
st.close();//close the statement
} catch (Exception eDA)
eDA.printStackTrace();
private void showData()
// pretend this takes awhile -> 3 seconds (count)
new Thread(new Runnable()
public void run()
String results = "";
int count = 0;
boolean journeyOn = true;
while(journeyOn && count < 3)
try
Thread.sleep(1000);
catch(InterruptedException ie)
System.err.println("show interrupt: " + ie.getMessage());
journeyOn = false;
results += count++ + ", ";
infoJTextArea.setText("Here are your results:\n"+results);
startJPanel.setVisible(false);
showJPanel.setVisible(true);
}).start();
class ShapeMovingPanel extends JPanel implements ActionListener
RT host;
Timer timer;
Shape shape, xformed;
int x, y, dx, dy;
public ShapeMovingPanel(RT rt)
timer = new Timer(-20, this);
host = rt;
/* if (rt.flagspeed==1)
timer = new Timer(-20, this);
else if (rt.flagspeed==2)
timer = new Timer(20, this);
else if (rt.flagspeed==3)
timer = new Timer(100, this);
//change speed here******************************
x = 0;//0
y = 0;//0
dx =2;//2
dy = 3;//3
//setBackground(Color.pink);
addMouseListener(new ShapeTender());
public void actionPerformed(ActionEvent e)
int w = getWidth();
int h = getHeight();
if(w <= 0 || h <= 0)
return;
checkBoundries(w,h);
x += dx;
y += dy;
repaint();
private void checkBoundries(int w, int h)
Rectangle r = xformed.getBounds();
Insets insets = getInsets();
if(r.x + dx < insets.left || r.x + r.width + dx > w - insets.right)
dx *= -1;
if(r.y + dy < insets.top || r.y + r.height + dy > h - insets.bottom)
dy *= -1;
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
AffineTransform at = AffineTransform.getTranslateInstance(x, y);
if (RT.flag==1)
{g2.setPaint(Color.red);// changed colour here***************************
else if (RT.flag==2)
{g2.setPaint(Color.blue);// changed colour here***************************
else if (RT.flag==3)
{g2.setPaint(Color.green);// changed colour here***************************
else if (RT.flag==4)
{g2.setPaint(Color.yellow);// changed colour here***************************
else if (RT.flag==5)
{g2.setPaint(Color.orange);// changed colour here***************************
else if (RT.flag==6)
{g2.setPaint(Color.black);// changed colour here***************************
xfoI'm (being lazy and) using the older RT app posted on your last thread. I removed the
TimeNow timer from the RT class and used System.currentTimeMillis (as you requested) to
determine the elapsed time during the animation (see "startTest", "stop" and
"movingObject" methods). Also changed the DecimalFormat to NumberFormat and set the
"maximumFractionDigits" to "2" so it will truncate the fraction to two digits (more simple
than before). Made arrangements for the ShapeMovingPanel class to update the
"timerJTextField" during the animation (RT.updateTime method).
The MouseMotionListener is causing the animation to appear jerky and uneven. The
"mouseMoved" method is very busy while the mouse is moving. You might consider recording
the "mousePressed" events instead of the "mouseMoved" events, ie, the events where the user
is attempting to click inside the moving shape. It would allow the app to be more
responsive and might eliminate the uneven motion of the animating shape.
import java.awt.*;
import java.awt.event.*;
import java.awt.geom.*;
import java.io.*;
import java.text.*;
import java.util.*;
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.event.*;
import javax.swing.Timer;
public class RT extends JFrame implements MouseMotionListener
//declares a number of swing componets to be used for the JFrame
private JTextArea infoJTextArea;
private JPanel showJPanel, startJPanel, helpJPanel, resultsJPanel;
private JLabel de4JLabel, de3JLabel, mainTitleJLabel, nameJLabel, ageJLabel,
deJLabel, de1JLabel, de2JLabel, timeJLabel,nameResultJLabel,
ageResultJLabel, timeResultsJLabel, ratingJLabel;
private JTextField nameJTextField, ageJTextField,nameResultJTextField,
ageResultsJTextField, timeResultsJTextField, ratingJTextField;
private JButton exitJButton, showJButton, loginJButton, startTestJButton,
tempObjectJButton;
private JScrollPane scroll;;
// creates and sets up a number of varibles to be used by the class
private long startTime;
private long endTime;
public int timeLimit = 0;
public int age;
public String name;
private JTextField timerJTextField;
ShapeMovingPanel testJPanel;
NumberFormat timeDec;
Random seed;
Shape shape;
Shape[] shapes = {
new Rectangle2D.Double(50, 30, 75, 25),
new Ellipse2D.Double(175, 125, 50, 50),
new Ellipse2D.Double(90, 100, 75, 35)
public RT()
timeDec = NumberFormat.getInstance();
timeDec.setMaximumFractionDigits(2);
seed = new Random();
shape = shapes[0];
createUserInterface();
private void createUserInterface()
Container contentPane = getContentPane();
contentPane.setLayout( null );
// set up infoJTextField
infoJTextArea = new JTextArea();
infoJTextArea.setBounds( 20, 420, 550, 170 );
infoJTextArea.setEditable( false);
infoJTextArea.setText("\n Welcome to the reaction testing program, this " +
"program is designed to test your reactions in a \n"+
" number of different situations.\n"+"\n Please " +
"enter your name and age, or select show previous results.");
contentPane.add( infoJTextArea );
scroll = new JScrollPane(infoJTextArea);
scroll.setBounds( 20, 420, 550, 170 );
contentPane.add( scroll );
startJPanel = new JPanel();
startJPanel.setBounds( 16,16, 560, 375 );
startJPanel.setBorder(
new TitledBorder( "WELCOME -PLEASE ENTER YOUR NAME AND AGE:" ) );
startJPanel.setLayout( null );
contentPane.add( startJPanel );
//sets up a JPanel
mainTitleJLabel = new JLabel();
mainTitleJLabel.setIcon( new ImageIcon( "title.png" ) );
mainTitleJLabel.setBounds( 30, 10, 520, 170 );
mainTitleJLabel.setHorizontalAlignment( JLabel.CENTER );
startJPanel.add( mainTitleJLabel );
//creates a newJLabel
nameJLabel= new JLabel();
nameJLabel.setBounds( 52, 200, 70, 35 );
nameJLabel.setText("Name:");
startJPanel.add( nameJLabel);
//creates a new JTextField
nameJTextField = new JTextField();
nameJTextField.setBounds( 130, 200, 300, 24 );
startJPanel.add( nameJTextField );
//creates a newJLabel
ageJLabel = new JLabel();
ageJLabel.setBounds( 52, 245, 100, 35 );
ageJLabel.setText("Age:");
startJPanel.add( ageJLabel );
//creates a new JTextField
ageJTextField = new JTextField();
ageJTextField.setBounds( 130, 245, 300, 24 );
startJPanel.add( ageJTextField );
//creates a JButton
loginJButton = new JButton();
loginJButton.setBounds( 440, 200, 90, 24 );
loginJButton.setText( "Login" );
loginJButton.setBackground( Color.YELLOW );
startJPanel.add( loginJButton );
loginJButton.setEnabled(true);
loginJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
// not necessary to pass events to these methods...
Login(); // calls the Login method
//creates a JButton
showJButton = new JButton();
showJButton.setBounds( 200, 320, 180, 24 );
showJButton.setText( "Show previous results" );
showJButton.setBackground( Color.YELLOW );
startJPanel.add( showJButton );
showJButton.setEnabled(true);
showJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
showData(); // calls the showData method
//sets up a JPanel
showJPanel = new JPanel();
showJPanel.setBounds( 16,16, 560, 375 );
showJPanel.setBorder(new TitledBorder( "PREVIOUS RESULTS:" ) );
showJPanel.setLayout( null );
contentPane.add( showJPanel );
//sets up a JPanel
helpJPanel = new JPanel();
helpJPanel.setBounds( 16,16, 560, 375 );
helpJPanel.setBorder(
new TitledBorder( "HELP DETAILS:" ) );
helpJPanel.setLayout( null );
helpJPanel.setVisible(false);
contentPane.add( helpJPanel );
//creates a newJLabel
deJLabel= new JLabel();
deJLabel.setBounds( 23, 390, 530, 35 );
deJLabel.setText("Details:");
contentPane.add( deJLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds( 25, 100, 530, 35 );
de1JLabel.setText("You are about to start the reaction test, when you " +
"press the start button it will begin.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de1JLabel= new JLabel();
de1JLabel.setBounds(160, 145, 530, 35 );
de1JLabel.setText("Simply catch the moving item and click.");
helpJPanel.add( de1JLabel);
//creates a newJLabel
de2JLabel= new JLabel();
de2JLabel.setBounds( 20, 380, 70, 35 );
de2JLabel.setText("Details:");
helpJPanel.add( de2JLabel);
//creates a JButton
startTestJButton = new JButton();
startTestJButton.setBounds( 185, 205, 180, 60 );
startTestJButton.setText( "START" );
startTestJButton.setBackground( Color.YELLOW );
helpJPanel.add( startTestJButton );
startTestJButton.setEnabled(true);
startTestJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when search is pressed
public void actionPerformed( ActionEvent event )
startTest();
//sets up an animation panel
testJPanel = new ShapeMovingPanel(this);
testJPanel.setBounds( 16,16, 560, 375 );
testJPanel.setBorder(new TitledBorder("Click the moving object:"));
testJPanel.setLayout( null );
testJPanel.setVisible(false);
contentPane.add( testJPanel );
// this is causing the animation to appear uneven
// you can try the app with and without this to see
// testJPanel.addMouseMotionListener(this);
//creates a newJLabel
timeJLabel = new JLabel();
timeJLabel.setBounds( 440, 330, 100, 35 );
timeJLabel.setText("Time:");
testJPanel.add( timeJLabel );
//creates a new JTextField
timerJTextField = new JTextField();
timerJTextField.setBounds( 480, 335, 60, 24 );
timerJTextField.setText(String.valueOf(timeLimit));
timerJTextField.setHorizontalAlignment(JTextField.CENTER );
timerJTextField.setEditable(false);
timerJTextField.setBackground( Color.YELLOW );
testJPanel.add( timerJTextField );
resultsJPanel = new JPanel();
resultsJPanel.setBounds( 16,16, 560, 375 );
resultsJPanel.setBorder(new TitledBorder("HERE ARE YOUR RESULTS:"));
resultsJPanel.setLayout( null );
resultsJPanel.setVisible(false);
contentPane.add( resultsJPanel );
de3JLabel= new JLabel();
de3JLabel.setBounds(20, 200, 530, 35 );
de3JLabel.setText("Below is also the movements you made with your mouse, " +
"you may exit the program now.");
resultsJPanel.add( de3JLabel);
de4JLabel= new JLabel();
de4JLabel.setBounds(135, 245, 530, 35 );
de4JLabel.setText("Thank you for trying the Reaction Testing program");
resultsJPanel.add( de4JLabel);
//creates a newJLabel
nameResultJLabel= new JLabel();
nameResultJLabel.setBounds( 62, 55, 50, 35 );
nameResultJLabel.setText("Name:");
resultsJPanel.add( nameResultJLabel);
//creates a new JTextField
nameResultJTextField = new JTextField();
nameResultJTextField.setBounds( 140, 55, 300, 24 );
resultsJPanel.add( nameResultJTextField );
nameResultJTextField.setEditable(false);
//creates a newJLabel
ageResultJLabel = new JLabel();
ageResultJLabel.setBounds( 62, 90, 100, 35 );
ageResultJLabel.setText("Age:");
resultsJPanel.add( ageResultJLabel );
//creates a new JTextField
ageResultsJTextField = new JTextField();
ageResultsJTextField.setBounds( 140, 90, 300, 24 );
resultsJPanel.add( ageResultsJTextField );
ageResultsJTextField.setEditable(false);
//creates a newJLabel
timeResultsJLabel = new JLabel();
timeResultsJLabel.setBounds( 62, 125, 100, 35 );
timeResultsJLabel.setText("Time taken:");
resultsJPanel.add( timeResultsJLabel );
//creates a new JTextField
timeResultsJTextField = new JTextField();
timeResultsJTextField.setBounds( 140, 125, 300, 24 );
resultsJPanel.add( timeResultsJTextField );
timeResultsJTextField.setEditable(false);
//creates a newJLabel
ratingJLabel = new JLabel();
ratingJLabel.setBounds( 62, 160, 100, 35 );
ratingJLabel.setText("Your Rating:");
resultsJPanel.add( ratingJLabel );
ratingJTextField = new JTextField();
ratingJTextField.setBounds( 140, 160, 300, 24 );
resultsJPanel.add( ratingJTextField );
ratingJTextField.setEditable(false);
//creates a JButton
exitJButton = new JButton();
exitJButton.setBounds( 235, 310, 90, 24 );
exitJButton.setText( "Exit" );
exitJButton.setBackground( Color.WHITE );
resultsJPanel.add( exitJButton );
exitJButton.setEnabled(true);
exitJButton.addActionListener(
new ActionListener() // adds an action listener,anonymous inner class
// event handler called when exitJButton is pressed
public void actionPerformed( ActionEvent event )
System.exit(0); //closes the programme
}); // end anonymous inner class
addWindowListener(new WindowAdapter()
public void windowClosing(WindowEvent e)
System.exit(0);
// set properties of application's window
setTitle( "Reaction Tester - CMT3991" ); // set JFrame's title bar string
//setSize( 1280,995 ); // set width and height of JFrame
setSize( 608, 650 ); // set width and height of JFrame
setVisible( true ); // display JFrame on screen
//** set up of method main */
public static void main( String[] args )
RT application = new RT();
application.setDefaultCloseOperation( EXIT_ON_CLOSE );
} // end method main
private void Login()
try
name = nameJTextField.getText();
age = Integer.parseInt(ageJTextField.getText());
startJPanel.setVisible(false);
showJPanel.setVisible(false);
helpJPanel.setVisible(true);
infoJTextArea.setText("\n Welcome "+name+" you will soon know how " +
"fast your reactions are");
catch (NumberFormatException exception)
JOptionPane.showMessageDialog(this,
"There is either a blank field or a number hasn't been entered",
"Input Type error", JOptionPane.ERROR_MESSAGE);
//shows this is something has been entered wrong
private void startTest()
helpJPanel.setVisible(false);
shape = shapes[seed.nextInt(shapes.length)];
testJPanel.setShape(shape);
testJPanel.setVisible(true);
testJPanel.start();
startTime = System.currentTimeMillis();
infoJTextArea.setText("");
* called by animation panel after shape is clicked
public void stop()
endTime = System.currentTimeMillis();
movingObject();
* called by timer actionPerformed in ShapeMovingPanel
public void updateTime()
long timeNow = System.currentTimeMillis();
double elapsed = (timeNow - startTime)/1000.0;
timerJTextField.setText(timeDec.format(elapsed));
* this will compete with your animation
* ie, it will slow it down or make it appear jerky
public void mouseMoved(MouseEvent e)
saySomething("\n Mouse moved", e);
public void mouseDragged(MouseEvent e)
saySomething("\n Mouse dragged", e);
void saySomething(String eventDescription, MouseEvent e)
infoJTextArea.append(eventDescription
+ " (" + e.getX() + "," + e.getY() + ")");
infoJTextArea.setCaretPosition(infoJTextArea.getDocument().getLength());
private void movingObject()
testJPanel.setVisible(false);
resultsJPanel.setVisible(true);
nameResultJTextField.setText(name);
ageResultsJTextField.setText(String.valueOf(age)+" years old");
double elapsedTime = (endTime - startTime)/1000.0;
timeLimit = (int)elapsedTime;
timeResultsJTextField.setText(timeDec.format(elapsedTime)+" seconds");
String mouse = infoJTextArea.getText();
String tick = timeDec.format(elapsedTime);
try
// create a file called welch.txt
final FileWriter outputFile = new FileWriter(name+".txt", true);
final BufferedWriter outputBuffer = new BufferedWriter(outputFile);
// converts data to a formatted string
final PrintWriter printstream = new PrintWriter(outputBuffer);
printstream.println("The person's name is: "+name);
printstream.println("There age is: "+age);
printstream.println("Time taken: "+tick+" seconds");
printstream.println("The mouse moved as follows: "+mouse);
//states what needs to be printed to the new file
printstream.close(); // closes teh printstream
catch(IOException eio)
//catchs the IO exception
if(timeLimit<5)
ratingJTextField.setText("Thierry Henry");
if(timeLimit>5)
ratingJTextField.setText("Average");
if(timeLimit>10)
ratingJTextField.setText("You gotta be fat or something");
if(timeLimit>20)
ratingJTextField.setText("See a doctor");
String rate=ratingJTextField.getText();
private void showData()
// String results = "";
// infoJTextArea.setText("Here are your results:\n"+results);
startJPanel.setVisible(false);
showJPanel.setVisible(true);
class ShapeMovingPanel extends JPanel implements ActionListener
RT host;
Timer timer;
Shape shape, xformed;
int x, y, dx, dy;
public ShapeMovingPanel(RT rt)
host = rt;
timer = new Timer(25, this);
x = 0;
y = 0;
dx = 2;
dy = 3;
setBackground(Color.pink);
addMouseListener(new ShapeTender());
public void actionPerformed(ActionEvent e)
int w = getWidth();
int h = getHeight();
if(w <= 0 || h <= 0)
return;
checkBoundries(w,h);
x += dx;
y += dy;
repaint();
// update RT.timerJTextField
host.updateTime();
private void checkBoundries(int w, int h)
Rectangle r = xformed.getBounds();
Insets insets = getInsets();
if(r.x + dx < insets.left || r.x + r.width + dx > w - insets.right)
dx *= -1;
if(r.y + dy < insets.top || r.y + r.height + dy > h - insets.bottom)
dy *= -1;
protected void paintComponent(Graphics g)
super.paintComponent(g);
Graphics2D g2 = (Graphics2D)g;
g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
AffineTransform at = AffineTransform.getTranslateInstance(x, y);
g2.setPaint(Color.red);
xformed = at.createTransformedShape(shape);
g2.draw(xformed);
public void start()
if(!timer.isRunning())
timer.start();
public void setShape(Shape s)
shape = s;
Rectangle r = shape.getBounds();
x = r.x;
y = r.y;
repaint();
private class ShapeTender extends MouseAdapter
public void mousePressed(MouseEvent e)
if(xformed.contains(e.getPoint()))
timer.stop();
host.stop();
} -
Taking too much time and not connecting to ipad software server
taking too much time and not connecting to ipad software server and not updating.. why
because everyone is doing the same thing you are... be patient, and you will get the update... I had to grab the update over 3G (it won't let you download or install, but it got me in the door) and then switch back to wifi and download and install.
-
Is there any way to view a keynote presentation and the presenter notes on the iPad at the same time? My professors at school have keynote presentations and i take notes during class with the presenter notes feature. I was wondering if there was any way i can view both of them on the same screen on my iPad while studying? This way I could see their slides along with the notes i take during class.
None that I know of. Suggest to Apple.
Send feedback to Apple.
http://www.apple.com/feedback/ipad.html
Cheers, Tom -
ever since I upgraded to ios 7, my battery life is very short. I do not use the ipad all that much and have to charge it twice as much as before. I have been on the phone to Apple 3 times and turned off a number of things that I am not using and now power it off more regularly but still not happy with battery life. It is less than a year old and as I said, I don' t use it all that much
My best bet would be to restore the phone. Back it up to itunes, and then reset it Factory settings. This way, any corrupt software will be removed, and you can start fresh. Make sure you back it up first. By the sounds of it, you are using the phone for business and probably need the data from it. Hope this helps!
-
Having problems with ipad mini and Siri. Works sporadically, will work once and then the second time not. Worked all the time with the original Mailbox app. Then started doing the same thing when I installed the new update so wondering if it is software?
Hi,
I have the check box on a second Partition but not on the Time Machine one
I forget what I did now to get this called "Recovery HD"
For the rest try https://discussions.apple.com/docs/DOC-4055 User Tip that links to Pondini's work on Time Machine.
10:17 pm Friday; May 2, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Each time I turn on ipad it is Telling me siri not available connect to to the internet
each time I turn on ipad it is telling me siri is not available connect to the interner. also I cannot slide to open
Open iTunes on your computer. Then under File, click on Home Sharing.
Cheers, Tom
Maybe you are looking for
-
How to extract the Financial statement version from R/3 to BW
Hi all, I've used the business content to extract the details of SAP R/3 G/L account details to BW. Now, I need to extract the Financial statement version also from R/3 to SAP. Is there any business content object available for the same? Thanks in ad
-
Portal front end and R/3 back end
Hi All, Is it possible to debug R/3 backend from the front end Portal. I want to stop at the R/3 program when I click a link in the front end portal.... Thanks Ricky
-
Need help with Casting to HttpsURLConnection
Can anyone see why this simple cast will not work for me? Thanks. Here's the error message I get when I try to run it: C:\myJava\code\Source>java TestHttpsClientPost We have successfully initialized the default SSLSocketFactory! java.lang.ClassCastEx
-
I cant hear the backing track when I plug in the midi mic to record vocals?
I can't hear my backing tracks when I plug in my USB mic to record vocals with the track?
-
Importing from powerpoint...508 compliance issues
Accessibility is important to my agency but importing from powerpoint results in slides a screen reader can't read and the image tags identified in the powerpoint don't show up in published projects. Subject matter experts create the content, I put