Time of creation of PO

hi ,
Any particular table - field where the details of Time of creation of PO (server time) is stored.
Any pointers will be helpful.
Thanks ,
regards,
CK

Hello
Goto table CDHDR with
OBJECTCLAS = 'EINKBELEG'
OBJECTID = '4500000001' (number of PO)
CHANGE_IND = 'I' (insert)
You will have CDHDR-UDATE (date) and CDHDR-UTIME (time)

Similar Messages

Alert message is needed at the time of creation ,if it reaches ,the maximu

DEAR SA EXPERTS,
Can you please me that alert message is needed at the time of creation ,if it reaches ,the maximum stock level (Stock+level)
Thanks
Mohit

Hi,
Please refer the below links.
Alert Message
Re: Alert Message
Hope it helps you.
Thanks.

At the time of creation of POaccount assignment is coming mandatory

Dear all;
At the time of creation of PO system showing the msg that the account assignment is mandatory for the material ,how to overcome this?
Kindly suggest whre in material master record I can change settings for account assingment ,or the control is somewhere else.
Regards;
Joydeep Mukherjee

Hi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale

Problem at the time of creation order

Dear Gurus,
facing update termination error at the time of creation/change the sales order..in development system
after some analysis, found one more error due to which above mention error is coming
report run : "RMCSUTIC" : check utility logistic info system
after running this report system giving error message "Unit O2 : No DDIC Information for source field OI0BW_ADQN - OIMSEHI1"
but when but in production server it's working fine without error message
kindly suggest some solution for the same
Regards,

No DDIC Information for source field
You may have to check the following notes. Take the help of your basis team.
1) 542872
2) 557683
3) 579022
4) 645136
thanks
G. Lakshmipathi

Issue at the time of creation of transfer order for inbound delivery

Hello,
I am facing one issue at the time of creation of transfer order for inbound delivery.
If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
Thanks and Regards,
Nikhil

Hi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale

Different batch no in prod order at the time of creation of prod order

Hi, we need different batch numbers in production order at the time of creation of production order. tried in system, i can able to create only one batch no at the time of creation of order. we need different batch no at the time of order creation and same no should be assigned at the time of GR from prod order. pls advise how to map this.

Dear,
Use the Exit EXIT_SAPLCOBT_001 under enhancement PPCO0001 where-in based on your requirement you can create batch for your order. You can use CALL FUNCTION 'VB_CREATE_BATCH' to create the batches as per your requirement.
Also make sure the automatic batch creation setting in Prodn Scheduling profile has been turned-off so that the batch is created only through the user-exit.
Refer this thread,
Re: Batch creation
Please try and revert back.
Regards,
R.Brahmankar

Problem In time of creation wprk Scheduled...

Hi...
I have faced a problem in time of creation work scheduled, it is displaying a error massage like " Error while accessing public holiday calender on 20100101".
Can anybody help me to resolve the problem....
with regards,
Diptendu

Hi Diptendu,
I believe you are creating work schedule rule for the year 2009. So for this, u need to mandatorily generate holiday calendar upto Jan 2010.
This is because in order to generate workschedule rule for Dec2009, holidays in the holiday calendar should be assigned atleast in the month of Jan 2010 and then generate the holiday calendar upto Jan 2010. So the dates for generating holiday calendar would be 2009-2010
Hope this would solve ur issue.
Thanks.

Adding 1 hour to photo's time of creation (aka change the photo's time zone

Hi
I had my camera's time set incorrectly (1 hour less than the actual time), so all the photos I took during my vacation have this error embedded onto them. Is it possible to use iPhoto or any other tool to add 1 hour to the time of creation of each photo?
What I found in iPhoto is a way to reset the time of one or multiple photos to a single specific hh:mm:ss, but I just need to modify the hh part, leaving the mm and ss intact. Can this be done?
Thanks!
Ale.

I understand how to change the time on multiple photo as you described.
My question, I have several hundred photos that the time is off by 12hrs and 45 minutes. Is there a way to select multiple photos and adjust the time by 12 hr 45 minutes? (ie...1 photo shows 2:44am but was actually 3:29pm) either thru iPhoto or automator.
Thank you.

View the Date & Time of creation on FCP's browser

Hi,
in the browser of FCP I would like to see the Date & Time (of creation) of my clips that have been shooted in DVCam. I know that somewhere into the file there is the information I need, but I can't view it. Anyone knows how I can find it? I've already looked in all the hidded columns in the browser... Thanx
Mac Pro Mac OS X (10.4.8) FCP Studio

Oh yeh, sorry, I missed the word "tape". I'm on FireStore, so the file creation date is the shoot date. And so is the horribly long file name.
Yes, that would certainly have its uses, and I'm surprised it isn't there. With all the data that is tracked, why throw it away?
Date would in many cases be stored in time code user bits, but as far as I can tell FCP doesn't keep track of that either.

How do I name a LabVIEW project at time of creation?

Whenever, I create a new blank project, it is named "Untitled (n)", where n is a serially assigned number. I am not given a chance to enter a name during the creation process and have not found a way to change it in the Project Explorer window. By the time it appears in the Project Explorer window, the directory structure has already been created (named), so it's really too late.
Can someone tell me how to assign an arbitrary Project Name at the time of creation?
Solved!
Go to Solution.

When you hit save, you should be able to select a naming of your choosing.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Drive-time polygon creation

Hello,
I am new to Oracle spatial.
Has anyone successfully implemented drive-time polygon creation using
network data models ?
I am trying to build a drive-time network contains all streets in the United States.
Thanks,
Steven

Hello,
By "Drive-time polygon" do you mean something like an isochrone? i.e draw me a polygon that shows the area within 20 minutes driving time of location "X"?
The NDM (Network Data Model) contains a fairly rich Java API but I can't remember off the top of my head if this functionality is supported "out of the box" or not. Check the docs.... There is a "withinCost" function which sounds promising.
In my opinion you will struggle to load a fully detailed street network for the entire U.S into the NDM and then use the Java API (or PL/SQL API as this is based on the Java API) without problems. The limits to the amount of memory that can be allocated to a Java process effectively limit the size of the network that can be loaded.
Check out this thread re: the memory problems :
Re: Network Memory Object (PL/SQL)
If you can provide a "window" (MBR) to effectively cut down the area of interest then you may be OK.
If you want (for example) a list of zipcodes within N minutes of an individual zip code you may be better off buying in a pre-built "drive time matrix" which is just a table containing from zip, to zip & drive time and can be very quickly and easily queried....
Hope this helps,
Steve

Default Header text comes in PO at the time of creation

Hi Friends,
my problem is that a default Header text must come on the PO based on the user or purchasing group at the time Creation (In Transaction ME21N).
Is there any user exits or badi for it. I have already searched for them but i have not got any thing. Please help me.
Thanks for ur valuable answers

yes i know that through copy control we can get default text but it is item level text instead of the header text.and other thing it does not depend on the user or purchasing group. I default header text that is populated imediately when user call ME21N. So is there any BADI or user exit for that.Please reply.
Thanks for ur reply and valuable answers
null

RE:ALERT MESSAGE IS NEEDED AT TIME OF CREATION

Dear Sap experts,
Please advise me that if i want to show alert message at time of po creation, if it reaches the maximum stock level (stock+order) then where we change the configuration.
Thanks
Mohit

Dear Sap experts,
Please advise me that about the alert mesage at time of po creation, if it reaches the maximum the stock level (stock+order).
thanks
Mohit

PROBLEM AT THE TIME OF CREATION OF VALUATION TYPE(SPLIT VALUATION)

Dear cons
I want to create a valuation type ( t-code- OMWC) in configuration client. Then I will transport to quality as well as production. but it is a matter of great regret that at the time creation of valuation type no transport request no. is genereted. without TRansport request no. how can I transport to quality as well as production. pl. help me.
nrk

Hi,
This is a client level configuration so Transport Requests are not getting generated directly. Here follow this procedure;
Go to OMWC, Click on Global types. , Click on Types > Transport in the menu bar
The sytem will prompt for a request, create the request. A new screen for selcection of Valuation cateogires & valuation types will come. You can select here & transport.
Click on Save after selection, all the selcted items will be added to the request

Dynamic/Run time attribute creation & storage of attribute history in OID

Hello there,
The client wants to store a history of PIN (user defined field) changes in OID which requires run time creation of attributes to be stored in a particular object class.
Can we modify the OOTB OID connector in some way so that we can create and/or store the values of the newly generated user pin's? If so which method/API can be used? Any hints/clues ... please?
Thanks in advance!

I am not sure what is your exact requirement. If i am understanding correctly then you want to an extra field (User Defind Field) value to be stored in OID.
If yes, then
OIM password
If no, please explain a little bit more about your requirement.
And for creation you can attach java code if it is some logical id and you can't generate OOTB. Otherwise you can attach pre populate adapter in that
Struggler

Time of creation of PO

Similar Messages

Maybe you are looking for