Time off in print preview doesn't show

Hi, 
I'm working in Project 2010 on a Windows 7 machine.
In the Gantt-diagram the time off (saterday and sunday) is shown.
However, it doesn't in the print preview neather on the print itself. Te free time is just as blank as the rest of the week.
I use project a lot but never had this problem.
Even when I copiet the rows to another project where I didn't have the problem, the problem also moved to that project..
Hope anybody can help me with this problem.

Have you compressed the print so you are not showing every day?  Check File > Print and click the Page setup hyperlink.  On the Page tab does it show 100% ?

Similar Messages

  • Preview doesn't show up in the capture window

    When trying to capture, the video preview doesn't show up in the capture window, only the color bars. I am able to run my transport with the buttons and the key commands, so I know the Canon ZR500 is really communicating (easy setup: DV-NTSC), via firewire. My scratch disk is a G-Raid hooked up through the firwire 800 input. The crazy thing is, it worked only one time. I've wasted one whole day and this morning, restarting, rebooting, unplugging, different tapes, etc. Next step is takew my entire setup to the so-called Genius Bart and see if Apple's Geniuses know anything about Apple software. Frustrating as ****. I will never buy Apple again.

    Careful about editorializing. There are lots & lots of Mac users who are successfully capturing from Canon camcorders. I am one of them, and have never had a problem. So there is something in your setup that needs to be uncovered, it's not FCE or Canon per se.
    One observation, you have a small hard drive (100GB) and even though you appear to have 59GB free, that's actually not a lot of space. One hour of DV consumes about 13GB and during capture the Mac temporarily needs nearly 2x that space, which means your system is using the 'inner' cylinders of the hard drive, where performance slows down; this could explain your dropped frames problem. Can you move some stuff off your system HD onto your G-RAID (say, your iPhoto and iTunes libraries if you are using those apps, they often take a lot of disk space)?

  • Template Preview Doesn't show images

    I've created a template but when i go to create a new page
    from the template the preview doesn't show the images.
    Here's what i see
    http://tel3deals.com/pics/contributeproblem.jpg
    When i give it a name and open it it shows the page with the
    images.
    any idea why this is happening ?
    Thanks.

    THis is a real stab in the dark, but at the top of the "next column" there is a small grey arrowhead next to the word "preview" which, if clicked, will rotate to two different positions. One position shows a preview, the other rotated position does not show the preview.
    Try clicking on the arrow.

  • I have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put

    i have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put...

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.
    Make sure you provide the URL for the problematic page, so they can see the problem for themselves.

  • In print preview of PO shows Different VAT percentage

    Dear Experts
    In PO print preview VAT amount one time shows 14%, other time it shows 19%, some other time it shows 28%.  But actual percentage is 14%. How it shows different time different values.
    Please reply
    Regards
    Karan

    Hi,
    Might be you have selected Plant/Vendor/Material combination in key combination of FV11.If this is the case then you get the percentage which you maintained for that combination in FV11.check it out for all your combination is FV12.
    Thanks

  • Adobe Form Print Problem - Header is cut off without print preview

    We are currently experiencing a problem when trying to print Adobe forms.  We have created several forms and are experiencing the same issue with all forms.  The issue occurs when we are trying to print a form.  If we choose a print preview prior to printing, the form looks normal and prints fine.  However, if we do a direct print (i.e. no print preview), then the top part of the form is cut off.  It's almost like all of that data on the form gets shifted upward, cutting off about 1/2" to an 1" from the top of the form.  We have tried printing to different printers and are ending up with the same results each time.  We do not experience this issue with SAPScript.
    I have searched several threads and haven't been able to find an issue quite like the one we are experiencing.
    Has anyone ever exeperienced a problem like this before? 
    Currently using Adobe LiveCycle Designer 8.1.2 and are on Netweaver 7.00 EhP1.
    Thank you for any help.

    I am going to go ahead and close this thread as I believe we have found a solution.  Sai is correct that there is an issue with the design.
    If anyone else runs into this problem, take a look at note 968394 that talks about differences between print preview and printing from spool.  When you are in the print preview dialog box, under "Page Scaling," the default is "Shrink to printable area."  So if your form went outside the margins, it would shrink to fit giving you the impression that the problem is not with the print preview rather than the form itself. 
    After moving the header stuff down a bit everything is printing normal both through the spool and via print preview.
    Thank you!

  • Print Preview: SAP GUI showing updated text, CRM UI not showing updated text

    Hello,
    can anyone please help me with "Print Preview" button in CRM UI:
    In the CRM UI when a certain data is changed on the document, a note on the document is updated with changes in data. When pressing the "Print Preview" button the generated PDF is not showing an updated text. If i run the SmartForm directly in SAP GUI after the data change, the generated PDF shows an updated text. If i reload the CRM UI (close the browser and run the CRM_UI transaction) the "Print Preview" shows an updated text.
    What should i do, that the Print Preview in the CRM UI would also show an updated text (without reloading the CRM UI) ?
    Im thinking it could be a problem with the parameters SFPDOCPARAMS and SFPOUTPUTPARAMS, that are used when calling the SmartForm FM. The parameters are set as this:
       ls_outputparams-nodialog = 'X'.
       ls_outputparams-getpdf = 'X'.
       ls_outputparams-connection = 'ADS'.
       CALL FUNCTION 'FP_JOB_OPEN'
         CHANGING
           ie_outputparams = ls_outputparams
         EXCEPTIONS
           cancel          = 1
           usage_error     = 2
           system_error    = 3
           internal_error  = 4
           OTHERS          = 5.
       ls_docparams-country = 'SI'.
       ls_docparams-langu = sy-langu.
       CALL FUNCTION lv_name
         EXPORTING
           /1bcdwb/docparams  = ls_docparams
           I_HEADER_GUID      = ls_orderadm_h_wrk-guid
         IMPORTING
           /1bcdwb/formoutput = ls_formoutput
         EXCEPTIONS
           usage_error        = 1
           system_error       = 2
           internal_error     = 3
           OTHERS             = 4.
    SAP gurus, please help

    I figured the solution:
    In the Code Initialization of my interface (SFP transaction) i had to initialize the buffer:
       CALL FUNCTION 'INIT_LOAD_TEXT_BUFFER'
         EXPORTING
           EXCL_ID       = ls_stxh-tdid
           EXCL_LANGUAGE = ls_stxh-tdspras
           EXCL_NAME     = ls_stxh-tdname
           EXCL_OBJECT   = ls_stxh-tdobject
         EXCEPTIONS
           NOT_FOUND     = 1
           OTHERS        = 2.
    This way the text is loaded from the updated note every time a "Print Preview" button is pressed.

  • Print Preview doesn't reflect what is chosen from my printer properties

    I recently reinstalled my Windows XP Pro machine, installed Photoshop CS4 (actually Master Collection CS4) and installed the latest printer driver from Xerox for my Xerox Phaser 7750 printer.  I had a project to print out and it was 12x18.  I chose the paper size in my printer properties, but the print preview in Photoshop CS4 would not reflect it, it would continue to say 8 1/2" x 11", even though it showed 12 x 18 in the scaled Print Size box.  When I print it accepted the 12x18 and chose the right tray to pull the paper from, but it only printed the 8 1/2" x 11" and cut everything else off.
    What could possibly be going on here?  It used to work fine on my Photoshop CS2.  Is it the latest driver causing an issue?  The crazy thing is that I saved my project as a PDF and printed from PDF just fine, so it seems like Photoshop is having some issue.
    Any help would be appreciated.

    I feel a little silly right about now.  I came home, brought up Photoshop and everything worked as it should.  I don't know why it didn't before, except that maybe I installed Photoshop, started it and realized I didn't have the printer installed yet, then I installed the printer driver and didn't restart photoshop.  If that was the case I could see why I would have problems.  Thank you so much for your suggestions though, people that are willing to help even when it is the fault of the user are amazing.  Thanks so much!

  • How do I delete a movie off my iPhone that doesn't show up in iTunes?

    I purchased this movie on iTunes at least 3 years ago, and both my brother and I recall deleting it. It doesn't show up in my iTunes (therefore I can't sync it on or off), nor my brother's. And I updated my iPhone 4s to iOS 7 a couple of days ago, and I just realised now that I have this movie on my phone, of which no one knows where it has come from. how do I delete it and where would it have come from if it's not on my computer?
    P.S. I only sync my phone on my Mac OS X.

    .  Another strange thing is that in ITunes "Photos" at the bottom where you see the colored visuals of what applications are using space "Other" consumes more than half my space.
    that can sometimes happen, when trying to update the software failed. Then partially downloaded updates will take up a lot of space. Photos synced to iDevices can only be removed by syncing again.
    If syncing again with just one small album with a single photo selected will not remove the synced albums, back up the iPhone to iTunes and restore the device to factory settings:
          iOS: Back up and restore your iOS device with iCloud or iTunes
    Restoring should get rid of the "other" and the synced albums.

  • The icon on the display when i turn up or down or off the sound it doesn't show up

      I don't know if this is the right topic for my problem...
    I have a pavilion dv6-3299en Rossignol. I uninstalled some extra features and then i had a very small problem.
     It;s not much but  I'd like it to be solved.
    When i turn up or down the sound or turn it off by pressing the buttons, there was an icon, an image with the level of the sound that used to appear, now it doesn't. 
    Same thing when the sound is off, it doesn't show any more an image with a red line... I hope you understand what i'm talking about.
    With mousepad no problem, when i doubleclick the up and left corner, an image appears which shows a red line over it when it's offor nothing when it's on.
    Hope you can help me. It's nothing important but it's usefull.
    This question was solved.
    View Solution.

    Hi Konstantina,
    That could well be the problem; try the following.
    Download and install HP MediaSmart Music on the link below.
    ftp://ftp.hp.com/pub/softpaq/sp51001-51500/sp51027.exe
    When the installation has completed, restart the notebook and then re-install HP MediaSmart SmartMenu again.
    HP MediaSmart SmartMenu
    Again, after this installation, restart the notebook and see if the volume OSD has re-appeared.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Preview doesn't show conditional fields in PDF document

    A PDF document created with Adobe Acrobat has several radio buttons with a dropdown field conditional on each one. These dropdowns don't show in Preview, but do show in the Adobe reader.  Any suggestions for the form developer?

    We get these files from the vendor , he creates the file in Adode illustrator for us  and he saves the f
    ile in PDF format and sends them . He aslo advised he can open
    the filre in acrodat pro version  and the print pervi
    ew is fine and he can print the file with out any issue.
    VJ

  • Pusrchase order having 3 line item But print preview in PDF shows blank.

    Hi All,
    Purchase order has 3 line items. While taking print preview in PDF format 1st page shows 1 line item and 2nd page is blank.
    I am not understanding the issue why other two line items are not getting displayed.?
    Please provide me with the solution.
    Thanks
    Forum

    Yes,there is a issue in print preview itself , if there is a issue in Print Prview that means page is gets skipped on next page ,therefore 2nd page automatically gets blank ,debug the same with abapor ,if this problem gets resolved then automatically system will convert the document in PDF as per print preview.
    Regards,
    Sandesh Sawant

  • Printer Driver Doesn't Show Up.

    I have a Canon Pixma MP500 (Multifunction). It's only about two months old.
    Up until last weekend, I was still running Jaguar. My printer worked perfectly. I upgraded to Tiger on Saturday and didn't try to print anything until today. When I tried to, I saw my printer was no longer installed. However, it was detected. When I tried to add it, the correct driver was not listed. I put in the install disc that came with the printer, re-installed the software and restarted. The correct driver still didn't show up. I went to Canon's site, downloaded the drivers, installed again and restarted. They're still not listed. I tried to choose some of the drivers that are listed to see if I can print an email, but anything I spool just sits there in the queue.
    What do I do next? I know it's plugged in correctly. I haven't touched it since I set it up two months ago and it was working perfectly fine just before I upgraded to Tiger.

    I've same problem, same Pb 17'
    the difference is that my printer was working in TIGER till yesterday. Unexpectly yesterdey I lost drivers, MP500 disappeared, I've reinstalled drivers but...nothing.
    Pb find printer, but doesn't find drivers; drivers are installed.
    I think I need help.
    p.s.:Same problem with PIXMA ip1600.
    Pb 17' Mac OS X (10.4.7)

  • Printer Problems (Doesn't show up...) HELP PLEASE!

    My friend has an iBook G4 and an Epson Photo R220 printer.
    All of sudden the "printer itself" isn't showing up in the "print utility window" -- as well, I trashed everything Epson off her cpu and then clean installed the original Epson R220 software and still nothing showed up (even when I reinstalled the driver). UGH!
    Basically, when I open the "Print / Fax" window in the Syst.Pref's and click on "Set up Printer", it tells me I have NO printers available? I then clikc on ADD and after a while of spinning/spooling -- NOTHING happens.
    WHAT AM I MISSING? PLEASE - IF ANYONE CAN HELP - THAT WOULD BE GREATLY APPRECIATED!
    Josh

    Give Printer Setup Repair a try. There's a 7 day trial.
    http://www.fixamacsoftware.com/software/psr/
    John

  • Text to the right is cut off on print/preview of web pages

    To the WebMaster's of oracle.com
    I' still like to print out information from your web site about hot topics (like your recent articles about BPEL), so a long flight will get more interesting..
    However the text to the right is cut off when printing (using IE6 on WinXP). It seems that the formatting requires a minimum width.
    I would also prefer to see the "print view" link at the top of an article and not at the bottom.
    With best regards from Germany,
    Stefan

    Stefan....this problem sometimes occurs with articles containing wide code samples. Can you please provide the specific problem URLs?
    We are aware that the "Print View" functionality is less visible than it could be; unfortunately, moving it to the top of the page isn't as straightforward as it seems. We're working on it.
    Cheers, OTN
    This problem should now be fixed in the three BPEL Cookbook installments.
    Message was edited by:
    jkestely

Maybe you are looking for