Time on Calendar in Month View

Can someone tell me how to show the time of appointments when the calendar is in Month View. I know I saw it on the IPAD, but I can't find it now that I want to use it. Talked to Apple Care today, but they said it wasn't possible. I know better - help appreciated.

It is possible. APPLE store reps at one store told me it was not. Later, I saw the month view with times displayed on a floor model at another APPLE store and asked a rep how to set it up. After some looking and discussion, the employee told my husband and I how it was done. Unfortunately, we did not jot it down and neither of us remembers!! But we both saw it. Someone, somewhere knows..

Similar Messages

  • When first launching Calendar in Month view, events are missing

    On my iPad 1 running iOS 5.0.1, when I launch Calendar in Month view, the entire calendar is blank (no events). I have to either select a different view or create a new event in order for events to show up. This has been the case since upgrading to iOS 5 and also happens on my wife's iPad 2. I have restored both devices multiple times for other issues and the condition remains.

    Figured it out - the event has to be marked as full day event in order to be shown in monthly calendar. Disregard my question.

  • All of a sudden I can't print my calendar in 'month' view.  It only does day or list.  Any thoughts.

    All of a sudden I can't print my calendar in 'month' view.  It only does day or list.  Any thoughts?

    Thank you so much... I put this in another thread too, but, through help I learned that it is the errors that's causing this. The problem is that I don't know enough to fix it. It happens in a nested table, (don't know CSS well enough either to use it instead) and I can't figure it out... its a full page table, 50% on each side, and a center cell that should contain a same-size nested table... as in, I want to put all the content in the center.
    The error:  "table" is not allowed within: "tr"
    <body>
    <table width="100%" border="0" cellspacing="0" cellpadding="0">
      <tr>
        <td width="50%" valign="bottom"></td>
        <td width="980" align="center" valign="bottom"/><table width="980" border="0" cellspacing="0" cellpadding="0">
          <tr>
            <td width="980"> </td>
          </tr>
          <tr>
            <td width="980" align="right" valign="bottom"> </td>
          </tr>
        </table>   
        </td>
       <tr> <td width="50%" valign="bottom"></td>
      </tr>
    </table>
    </body>
    </html>

  • Why multi day events are shown only on the first day in calendar (in month view)

    Why multi day events are shown only on the first day in calendar (in month view)?

    Figured it out - the event has to be marked as full day event in order to be shown in monthly calendar. Disregard my question.

  • Palm desktop calendar - in month view, event times are in wrong order!

    I use Palm Desktop 4.1.4 on my Windows XP machine (I don't own a PDA). I enter my appointments in Week view and they look fine, but when I go to Month view (I want to print this view), the events for a given day show up in the wrong order!
    For example, on one day I see:
    9a Event
    10:30a Event
    2p Event
    12p Event
    and on the next day I see:
    9a Event
    2p Event
    10a Event
    I tried changing things in Options and Preferences - no luck. I have messed around with it and can't figure out any weird pattern it might be sorting by (I've tried re-entering appointments to see whether it sorts by the last time they were entered/edited, and looked into whether it was sorting by category, length of event name, first digit of the time, length of time, alphabetically by event name, by whether it repeats/has a location/has a note/has an alarm/was entered by clicking once and typing or by right-clicking). It just seems baffling, and it definitely seems like a bug, since of course you'd want your events sorted by time.
    Does anyone know what's going on or have this problem?
    Thanks!
    Post relates to: None

    I had looked at this in response to another post, and didn't notice the same problem. But then I went back further and noticed it sure enough...it's only occasional.
    I haven't done any kind of analysis as you have apparently done, mostly because I don't really use the desktop application except occasionally.
    Thought maybe it sorts repeating events differently than single events, but I've seen it both ways, so that doesn't seem to be it.
    It doesn't bother me enough, but it certainly seems like it would warrant an email support request to Palm, to see if they have an answer.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • Help: event times not printing in month view

    ... and yes, I have checked "show time in month view" in preferences, and the event times display on the screen. But on the monthly printout, the times do not appear, only ellipses where the time should be. There should be plenty of space for the information to print, there is white space both at the end of the event line and in the day box. But no times show up at all.
    System data: Mac Mini, OS X 10.4.2, iCal 2.0.3 (1055), Brother MFC 7820N printer.
    This is really awful... I just switched my wife over to the Mac Mini, and calendaring is a big part of what she needs. And she uses month views a lot. If I can't fix this, she'll probably throw the Mac Mini back in my face and I'll be sleeping on the couch. Yes, she cares that much about times printing in month views.
    Mac Mini   Mac OS X (10.4.3)  

    I don't know whether this a "solution" or a work-around, but I did find a way to resolve this problem. I recently started using iCal by transferring appointments from a BlackBerry using the BlackBerry PocketMac software. Although all of the appointment times appeared on the monthly calendar, most of the appointment times were replaced by ellipses when the monthly calendar was printed. It turns out that the times would print only after re-entering the appointment manually. This had to be done completely from scratch, i.e., not by editing the original appointment, or by cutting and pasting the appointment back into the calendar. This is a complete pain, but seems to work. I'd love to hear a better solution...

  • How do I hide time stamp in iCAL month view for Mavericks 10.9?

    I want to hide the time in Month View like I could before in 10.8.  Please help!  Calendar is too cluttered in month view for me to read.  In 10.8 you could select or deselect "Show time in month view".  Is there a way to do this in Maveriks 10.9?

    I have this same question! I DON'T WANT THE EVENT TIME TO SHOW ! I often just put my events anywhere on my calendar and have them take up 3 or 4 hours just so they show up larger, disregarding the times on the calendar, but rather typing my own times in at the beginning.  So, having the actual calendar event time show  is very confusing. Before the update, you could UNCHECK, show event times.  NoW that option does not exist!!  There must be a way to go into the system, and disable this function, however I am not computer literate enough to know how to do it without specific instructions.  DOES ANYONE OUT THERE KNOW HOW TO DO THIS??? Thanks in advance!!

  • Why are times not displayed in Monthly view of iCalendar?

    After the last update, the times for events in the monthly view in Calendar are no longer displayed? I have checked preferences and cannot find how to get this back. It did before and I used it for my office for appointments and I need the times displayed. Does anyone have a suggestion?

    Try making the window a little bigger.  I think it truncates time for space.  I see time on mine.

  • More than 6 Calendars in Monthly View?

    Is there any way to show more than 6 Calendars in the Monthly View?
    After 6 are displayed, there are just 3 dots that indicate that there are more Calendars out of sight.
    Thanks,
    Chris.
    Message was edited by: o'crikey

    Hi Del,
    Thanks for your reply.
    Here is a link to a pdf that shows an example of what I mean:
    http://www.amson.org/ical-001.pdf
    I track projects over weeks at a time and would use ical in the Monthly View mode mostly.
    Do you see how I have 6 Calendars showing with 3 dots above them that indicates more Calendars exist, but cannot be seen in Monthly View mode. If one goes to the Weekly View mode, all the Calendars are visible. However, I need to see all (more than 6) in the Monthly View.
    I looked in Preferences and don't see any way to change this there.
    Thanks,
    Chris.

  • Events are missing in the calendar in Month view in Blend

    Type :
    Bug
    Initial condition :
    The blend software is running. The calendar view is opened.
    Action :
    Select the month view.
    Expected result :
    All events are displayed for each day.
    Obtained result :
    The events of the previous month are missing.

    Having the same problems where the UI elements are missing in the layout screen.
    using the Show/Hide layout Preview Button  I get an Program cannot  display the web page.
    The server is on a different box . Tried running the sapgui  from a vista machine and a xp machine and they both have the same problem.
    If I run Sapgui on the server box the Show/Hide layout Preview Button  does show a subset on the ui elements but not all the examples described in the "ABAP Trial Version for Newbies: Part 18 - Starting with Web Dynpro for ABAP"
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1299772950DB10354599868941910736End?blog=/pub/wlg/6973
    Thanks in advance.

  • Get time to show in month view of iCal

    How do I get the time to show in the month view of iCal?

    So sorry to not have a solution but I wanted to chime in and say "me, too!". Not only create an event, but I can't edit it in month view, either. I thought it was my entire iCal program, since I just upgraded to Lion today, but after reading your post I realize I can edit events in week mode, just not month mode.

  • Wrong starting day of the week printing calendar in month view

    I'm trying to print a month view calendar with the weeks starting from Monday.
    In "Preferences" -> "General tab" ->"Start week on:"  I've set Monday, and it is properly viewed in Calendar, but when I try to print it in the preview I see Tuesday as first day of the week.
    This happens on many MacBook that I've tried, all with Yosemite and Italian regional settings.
    The only way to resolve this issue is to open "System Preferences" ->"Language & Region" and change the "First day of the week:" on Sunday in all my "Preferred Languages" (both Italian and English), to have the printing preview of a calendar starting on Monday!
    Is there an other way?
    Is this a bug that should be submitted to Apple to get a "patch" on future releases of Mac OS X?
    I know, it is a tiny issue, but annoying.
    Mauro

    Re: Calendar printing problem

  • Calendar in month view has no data until the page is swiped

    For the past couple of months, when I first open Calendar and it is in month view from a previous use, none of my entries show up. The phases of the moon and birthdays are all that will show. This only affects the month view.
    If I then swipe to another month then back, the information will show up again. Once I have done that, the calendar is good until the next day and it does it again.
    I do not completely shut off the iPad at night, but just charge it, but put it to sleep until the next morning.
    The iPad is running the most recent software updates.

    HI Raymond,
    I am able to solve that issue.
    My problem was that I was using two separate beans for the initial data table and the second data table which gets populated after we click on the initial datatable.
    After using the same bean for these two datatables solved the issue.
    Now I am able to view both the datatables on the same jsp.
    Thank you very much forthe prompt reply. I really appreciate that.

  • Appointment times not printing in month view

    When I print a monthly calendar, most but not all of the appointment times do not print. Instead, the time is replaced by elipses ("..."). Also, end times are not printed. Any suggestions?

    I don't know whether this a "solution" or a work-around, but I did find a way to resolve this problem. I recently started using iCal by transferring appointments from a BlackBerry using the BlackBerry PocketMac software. Although all of the appointment times appeared on the monthly calendar, most of the appointment times were replaced by ellipses when the monthly calendar was printed. It turns out that the times would print only after re-entering the appointment manually. This had to be done completely from scratch, i.e., not by editing the original appointment, or by cutting and pasting the appointment back into the calendar. This is a complete pain, but seems to work. I'd love to hear a better solution...

  • Calendar in Month view

    When my calendar is in month view, how can I get it to read Sunday-Saturday? Right now it reads Monday-Sunday. On my computer in outlook it reads Sunday-Saturday. PLEASE HELP..

    I had the same problem but when searching through the forum, I found the following. Would have never thought to look here but it worked.
    To change the iPhone Calendar to show Sunday as the first day of the week (far left in month view) - from the Home screen:
    1. tap "Settings"
    2. tap "General"
    3. tap "International"
    4. tap "Region Format"
    5. select "United States"

Maybe you are looking for

  • I know this is a common question - but is there a way to connect a USB pen drive to the iPad? (See details)

    Basically, I just bought a Nexus 7 after growing impatient waiting for the iPad mini.  But the Nexus has a fault, and I'm taking it back next week.  I'm wondering whether to get my money back, or just get another - because it's a pretty good device!

  • Error in posting the Idoc....

    Hi Experts,      When I post the Idoc from the external system to the SAP,I am getting the error as application document not posted and status code as 52.so what I need to do to overcome this error,please help me over this issue. Regards, Kiran.

  • Problem with do click on a field - Oracle 10g form - UNIX

    Hello, friends. I nedd a help. I have a problem with a Oracle 10g form when it was executed in UNIX environment. The problem is that when I do click with the mouse in a different field, doesn't lead me to the other field. That is, don't let me to do

  • Help me show rowcount of a cursor on forms canvas,,

    i mean.. The program unit is not in the forms application but in the oracle server side. i need to show a cursor's rowcount on forms canvas while a cursor is running loop in the program unit in real-time.. so i used the when-timer-expired trigger tha

  • Audition 3 level is loud

    Audition 3 is outputting audio much louder than that same audio when it's played in Audition 1.5. How do I adjust the audio output on Audition 3? Both programs are using the same sound card.