Time on Calendar is always off??

The times on my calendar are always an hour off from what they should be. But only when I import the calendar from my macbook, it will be the right time on my computer and then I import to my phone and it is an hour later. But if I put it in manually on my phone it is fine. How can I fix this??

Do you have Time Zone Support enabled on your iPhone and if so, do you have a city selected that is in your time zone?
Do you have Time Zone Support enabled with iCal on your Mac? If so, do you have a city selected that is in your time zone at System Preferences > Date & Time under the Time Zone tab?
If you have Time Zone Support enabled with iCal on your Mac, or only with your iPhone, or if it is enabled with both, do you need Time Zone Support enabled with either one?

Similar Messages

How to change travel time, in calendar, from always starting from work to starting from home., how to change travel time, in calendar, from always starting from work to starting from home.

it always starts my travel times from work. even though i am not at work. how can i change the start destination?

sberman Southern California
This solved my questionRe: Calendar Travel Time Starting from Work when I want to Start from Home Oct 23, 2013 8:43 PM (in response to theglenlivet12)
From Calendar's help:
To set your starting location, Calendar first looks for your location in any events that are up to three hours before this event. If Calendar doesn’t find a location, it uses your work address during work hours and your home address during other hours. (Your work hours are set in Calendar preferences using the “Day starts at” and “Day ends at” menus.) If your card in Contacts doesn’t have your addresses, Calendar uses your computer’s current location.

ICal times in left column are off five hours from calendar

I've just noticed that the times on the left side off my calendar are off. It says 7:00 but it's actually midnight (which is correct) and it proceeds ahead like that. For instance, where it says 2:00 it is actuallu 7:00 AM. I can tell this as when i schedule an event in the "block" it gives me the correct time. Also sometimes the week highlighted on the month view on the bottom left, highlights the right week but a month earlier. It's like it has a mind of it's own. Any suggestions?

.

IPhone 4s and 4 multiday calendar always off by 1 day

I've been having an issue for over a year that my iPhone calendar thats synced with exchange always displays multi day calendar events always starting 1 day later than its sheduled.
Ive check all the time zone/settings/ computer settings
My computer and my online calendar all display correctly.

Am having the same prolemand am a little concerned that you have had the problem for so long and there are no answers being offered.
Have just recently got an iPhone 4s and the calender has synced all my "all day events" to one day before the correct date.
The date is correct in my computer (Outlook) but not on phone. Have re-synced, changed settings, backed up and re-installed, been to Apple support, amd checked everything.
Can anyone please help.

Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac.

Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac. I have background switching unchecked in my preferences, and I have never selected it as an option. Also, when I go to my preferences, it will show the icon of the picture I changed it to, even though the desktop itself has switched back.

I would start with some basic troubleshooting.
REPAIRING DISK PERMISSIONS -
NOTE: refer to article "About Disk Utility's Repair Disk Permissions feature" found here http://support.apple.com/kb/ht1452 - for the actual apple article on these step. ----
- click finder in the bottom dock, and in the window that opens, select applications in the left column - scroll through until you see the 'Utilities' folder and double click to open it. Then double click on 'Disk Utility'
- When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
- ensure the the "first aid" tab is highlighted blue in the middle of the screen
- click the button at the bottom that says 'Repair Disk Permissions'
- this process will take a few minutes to run. It will indicate it's done, by scrolling to the bottom of the "details area" displaying 'Permissions repair complete'
Dan Frankes has written an excellent article for Macworld on "Permissions" and the need to repair them - see - http://www.macworld.com/article/52220/2006/08/repairpermissions.html. Another good web site is - http://www.thexlab.com/faqs/durepairfns.html.
REPAIRING DISK - About OS X Recovery - http://support.apple.com/kb/HT4718.
- restart your computer hold down command + R keys on the keyboard to boot you into Lion / Mountain Lion Recovery mode
- select english as your main language then the continue arrow
- select "Disk Utility" on the resulting screen then 'Disk Utility' ---
- When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
- ensure the the "first aid" tab is highlighted blue in the middle of the screen
- click the button at the bottom that says 'REPAIR DISK' .......NOT "Repair disk permissions"
- this process will take a few minutes to run. It will indicate it's done, by scrolling to the bottom of the "details area" displaying "The Macintosh HD appears OK"
If you get any other message OTHER than "The Macintosh HD appears OK", like "the Macintosh HD was repaired successfully" run the "Disk Repair" again, until it displays "The Macintosh HD appears OK".
Once done, restart the computer as normal

When inputing the time, my calendar always changes the end time to a "one-hour" segment, how do I change this?

Trying to set up appointments on my calendar. When I input the time, the calendar defaults to a "one-hour" segment. How do I fix this?

To change the default event time go into Tools-Options-Calendar-General and set the duration time.
No menu bar with Tools? Press the alt key.
To be able to change the time when setting the individual event, click on the link icon to the right of the time fields. If the points of the links are touching the duration time is locked to the default. If the points are separated you can set any duration.

Sync of iCal to Calendar in iPhone off by 1 hour

This problem has just come up in a 2 week old iPhone 3GS. When I enter new events in iCal and sync with iPhone, the times are one hour later in Calendar. Appears to match the advance in 1 hour of Daylight Savings Time from Nov. - March. So, entering event on Dec. 1 at 8 AM in iCal yields 9 AM event in Calendar. Help!

I had the same problem of a 1 hour offset between events on iCal/MobileMe calendars and the iPhone Cal. iCal and MobileMe calendars were right with respect to each other but the iPhone would show that event as an hour later.
I seem to have solved this issue by the following:
Go to iPhone Settings>Mail,Contacts,Calendars>Calendars>Time Zone Support
Change Time Zone Support selector to "OFF" then back to "ON".
Exit Settings
NB: NOT Settings>General>Date & Time
My Time Zone Support selector was "on", however Time Zone showed Etc/GMT -4
When I selected Time Zone Support to "off" and then back to "on", Time Zone changed to show "New York" (my local area). Calendar events then displayed the same times as iCal/MobileMe.
Rob

I'm using imovie 8.0.6. The timestamp is always off by length of video. Any ideas how to fix?

My job requires a correct timestamp. However the timestamp in imovie does not match that off my Sony DCR-SX45. For example: If I start filming at 10:00 and film for 5 minutes it should show up in imovie as a video clip that runs from 10:00 - 10:05. However, after it's imported imovie shows a start time of 10:05. This means it ends up indicating that the video runs from 10:05 - 10:10. Some of my videos can be almost an hour in length and this is a major issue. The timing is always off by whatever the length of video happens to be. Aside from manually fixing this for each and every video clip are there any ways to fix this? I have tried other cameras such as Canon and this creates a different issue regarding timestamp and seems to be related to time zones. Oddly enough the minutes are correct, but the hours are way off. Even though I am in the Atlantic time zone I have to set up the system as though I was in Portugal. My main concern, at this time, is trying to fix the issue with my Sony. Is there a setting that I can fix that will make the imported videos have a timestamp that actually starts at the moment that the camera began recording? Any help whould be greatly appreciated.

iMovie can not read from Dropbox.
Copy the file via web-browser action to your local hard-drive, use it in iM from there.

Daylight Savings Time in Calendar Bar

I am in Australia and we have also adjusted the clocks to Daylight Savings Time -
I am using an Iphone 5 with IOS 7.0.2 and all settings are set to time zone Sydney, in both Date and Time and Calendar.
The calendar shows the correct time at the top of the screen but the red bar that identifies the current time is showing pre DST - quite bizzare?
My Ipad is showing the same as is my wifes Iphone 5 (also updated with IO7)
I suggest this is an IO7 glitch/bug - anyone with a solution?

It's not just an hour late issue. My 3GS alarm went off an hour early this past Saturday. I tried to reset the alarm for the desired time and it didn't go off. Then my girlfriend's alarm on her 3GS did go off an hour late this morning.

Sending the same email message several times to contacts. Turned off iCloud, but still sending message.

Sending the same email message several times to contacts. Turned off iCloud, but still sending message.
A user had synced all of his contacts from his computer and iPhone to his iCloud. Today, his iCloud sent out the same message 20 times to all recipients. We were able to transfer all calendar items and contacts back to his pc and then disable iCloud. However, it still sent out the messages. Any ideas?

It's a carrier issue. I have AT&T and had this issue with my friend (who had an Android) and my mother (who had a feature phone). Both of them have Verizon for service and I'm thinking the issue was on Verizon's end. They both just dealt with it as we tried all sorts of things to get this sorted out (other than contacting Verizon directly) and had no luck.
They've both switched to iPhones so it's a moot point for us now, at least.
~Lyssa

Why the network link LED always off for all B200 blade servers? is it normal or heathy?

Hi Expert,
Why the network link LED always off for all B200 blade servers? is it normal or heathy? refer to the installation document, it means no active network connection. However, all these servers are up and running with netwirk connection. anyone could explain this?

Hi Tabish,
How many times do you have to open this same topic?
In my opinion, this is your THIRD thread for the same topic.

Calendar icon always has notification circle w/ it?

When I log in to icloud.com the Calendar icon always has notification circle w/ it in red on the home page. I have notifications OFF for calendar on all my devices. The notification only show up on icloud.com and not my devices. Any one else having this happen?

Everytime I log into icloud.com the homepage Calender icon has a red cricle w/ the number 1 on it. I do not have any notifictions on for Calender on any of my iDevices.

How do I set the default time for calendar alerts?

How do I set the default time for calendar alerts? I always want to have an alert 15 minutes before my appointments. I don't want to have to manually set it each time I make an appointment (I just moved to iphone from a windows mobile where this was basic stuff so I apologise if this is a noob question).

I have the same issue. I've searched these forums and found lots of people who have asked this same question, but nobody who has received an answer.
About a year ago, I migrated from a Windows PC and a Blackberry (both of which had very simple default alert options) to a MacBook Pro and an iPhone and have yet to find a solution on this forum or from any of my Apple-savvy friends. Very discouraging.

Audio always off sync after converting .asf files?

Hi, my problem is that it seems that every time I convert .asf files the audio always ends up off sync. Many programs don't even convert them at all, like ffmpegX, but my favorite video converter VisualHub does convert, but like I said before the audio is always off sync. Does anyone know of any software that can reliably convert .asf to another video format without the audio messing up?
On a side note, I do have plug ins such as Perian and Flip4Mac that allows Quicktime to read the files just fine, it's converting them that causes problems. For reference, the particular files I'm having trouble with use the WMV3 video codec and wmav2 audio codec. I think that's the problem.

My problem is a bit different, though just as irritating. I can't believe Adobe hasn't fixed this given how long since the original post has been up here. I capture satellite programming from a professional c-band satellite every week. I use good old fashion Quicktime to capture 30 minute programs for later broadcast. Our job is to capture the video from the satellite, clip the commercials at the beginning and end of the program and then export a clean version as an MPEG2 file. Quicktime provides two capture settings: high (which provides a very large ProRes file in 16bit stereo) or medium (which provides a manageable H264 file in AAC stereo). Both are Quicktime files.
While I don't have sync issues with the ProRes file, the file that is captured using H264 and the AAC stereo gets pushed out of sync by just enough frames to make it necessary to fix. This is adding about 2 to 3 hours of studio time each week to our production given we have to process about a dozen of these files. Viewing the original quicklime files using the newest version of quicklime or the old Quicktime program and most other video players yields a perfectly in-sync experience; it's just when it's imported into Premier Pro CC 2014 that the sync. problem appears. One solution that has worked is taking the master file and exporting it again as a .dv file, but this actually takes longer than fixing the sync issue within Premiere. My guess is it may be the AAC audio process that may be the problem.
We only started using Premiere a few months ago and are already re-evaluating whether we should return to FCP. We were really like most of the Adobe apps within Creative Cloud, but we use Premiere to much to put up with such a major flaw. I do wish Adobe would monitor some of these forums; they have no idea how customer service plays a key role for future software purchases.

Calendar appointments cut off notes - syncing error?

My calendar appointments cut off the notes to just under 500 characters on random appointments - how can I make sure the full notes sync? I am syncing my Microsoft Exchange Calendar between an iPhone (iOS 8.2), iPad and Outlook on a desktop (Office 2013 v15.0.4701.1002). Several coworkers have the same issue with varying frequency of occurance.

Well, I feel like an idiot, but sometimes the biggest problems have the simplest solutions. I actually did not have my PC set to adjust for daylight savings time. So I turned it on, then had to manually set the clock back an hour. Now the appointments in Outlook are at the correct time and when I sync my iPhone it no longer moves ahead one hour after.
Thank you very much for your help.

Time on Calendar is always off??

Similar Messages

Maybe you are looking for