Time Our Error while executing a BW reports.

Hello BW experts ,
We are getting the 'Time Our Error while executing some BW reports.'
Could anyone help us to solve the above issue.
regards,
Amol.

Hi,
previous answer is necessary, always check the shortdumps ... it can tell you alot about your problem
(ST22)..
what also could help is the following ... go to the infopackage, go to <u>scheduler</u> in the upper taskbar and there you can also set the time out parameters ..
But first, get your problem solved by the things you can read in the shortdump analysis report
also clever, is doing an extract test before you start loading ... rsa3
hope this helps ...
best regards,
Davy

Similar Messages

'Time Our Error while executing some BW reports.'

Hello BW experts ,
We are getting the 'Time Our Error while executing some BW reports.'
Could anyone help us to solve the above issue.
regards,
Amol.

hi Amol,
it may query performance problem,
try to execute from RSRT,
and click 'properties' from rsrt and try to set read mode = H query to read ... navigate or expand hierarchy
and cache mode = 1.
take a look following
oss note
557870 'FAQ BW Query Performance'
and 567746 'Composite note BW 3.x performance Query and Web'.
Prakash's weblog
/people/prakash.darji/blog/2006/01/27/query-creation-checklist
/people/prakash.darji/blog/2006/01/26/query-optimization
BW Performance Tuning Knowledge Center - SAP Developer Network (SDN)
Business Intelligence Performance Tuning [original link is broken]
performance docs on query
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3f66ba90-0201-0010-ac8d-b61d8fd9abe9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/c8c4d794-0501-0010-a693-918a17e663cc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/064fed90-0201-0010-13ae-b16fa4dab695

Run-time error while executing alv grid report

Hi everyone
I m trying to run a alv grid report it is giving a run time error while executing the statement CALL METHOD V_ALV->SET_TOOLBAR_INTERACTIVE.
Actually i added 2 buttons in the toolbar.after that when i execute the report i m getting errors.
<b>Error Analysis</b>
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
caught in
procedure "TOOLBAR_MENUS_INIT" "(METHOD)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
You attempted to use a 'NULL' object reference (points to 'nothing')
access a component (variable: "ME->M_CL_MENU_BUTTON_VARIANT").
An object reference must point to an object (an instance of a class)
before it can be used to access components.
Either the reference was never set or it was set to 'NULL' using the
CLEAR statement.

Hi Dinesh,
Seems you have not initialised ( Instantiated in OO ) the object and / or the parent container.
Check if you have create object for both the parent as well as the alv object.
So when you instatntiate the object of ALV you pass the object ( instantiated before hand ) in the parent container position.
Also you would have to register the events to the object using method. Then only the buttons will finction.
eg :
IF G_CUSTOM_CONTAINER IS INITIAL.
    CREATE OBJECT CUSTOM_CONTAINER_1
           EXPORTING CONTAINER_NAME = CONTAINER_1.
    CREATE OBJECT GRID1
           EXPORTING I_PARENT = CUSTOM_CONTAINER_1.
    CALL METHOD ALV_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
         EXPORTING I_STRUCTURE_NAME = 'VBAK
         CHANGING IT_OUTTAB        = IT_VBAK.
Reward points if useful.

Error while executing sales tax report S_ALR_87012394

Hi,
I am getting the below error while executing the sales tax report S_ALR_87012394.
Infomration: I have maintained the tax jurisdiction code 9 digits initially.after that i have maintained with 10 digits
Tax jurisdiction LA0000000 has defective structure
Message no. FS790
Diagnosis
When calling the GET_JURISDICTION_LEVEL_TTXD function module, a tax jurisdiction code was transferred which does not correspond to the structure specified in the table.
Procedure
Check the calculation procedure for the company code and determine the respective tax jurisdiction length and structure in Customizing. Check that the tax jurisdiction code transferred corresponds to the tax jurisdiction length and structure.
kindly help me
Thanks
Supriya

check is there any notes which you have to apply to correct already posted entries with 9 digits. because of this its generating this error

Run time Error while executing project infosystem reports (CN41/41N)

Hi,
I would like to inform while running project infosystems reports (CN41/41N / cns41 etc), it is taking long time & most of the time run time errors are coming. I observed due to more objects in projects, run time error is coming. Request you to suggest to fix the issue.
Thank you for your cooperation.
Regards,
Rakesh Pradhan

Hi Rakesh,
The memory which can be managed by the logical database is approx.
100 MB. You can use the following rule of thumb to calculate the
allocated memory of your selection:
[( sum of projectdefinitions + sum of WBS elements + sum of networks and orders ) * 1 KB + ( sum of activities     ) * 4 KB ] *2,5 = memory consumption
Further objects - as relationships, capacities, ... will increase
the memory consumption. (see note 107605)
You can find out the number of objects bein used using the "Test selection scope" (CTRL+F12) button in CN41
Other recommendations are:
1) Check the profile (parameter "rdisp/PG_MAXFS") with your Basis
   colleague and adjust upwards (Note 133909)
2) Select a smaller range of objects by using status schema
   or more dynamic selections. Please review SAP Note 206264.
3) Please review also 107605, which gives you further information
   concerning the selection in Project Information System.
Hope this helps!
Regards
Martina
Message was edited by:
        Martina Modolell

URL error while executing a web report in WAD

Hi,
When I execute a web report through the Web Application Designer, I get the following error:
The requested URL could not be retrieved
While trying to retrieve the URL: http://abcd.efghi.es:8000/sap/bw/BEx?
The following error was encountered:
Unable to determine IP address from host name for abcd.efghi.es
The dnsserver returned:
Name Error: The domain name does not exist.
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
But when I execute the web report with the IP of the machine http://123.456.7.893:8000/sap/bw/BEx?...........
I can execute my web report correctly.
I didn't find any options in the menu web template in order to modify the url generation.
Please help me to solve this problem.
Regards,
Rocio

You are not alone - Looks like SAP is also looking into this.
Web Application Designer Appearing in Unicode (UTF-8)

Error while executing the test report

Hello
i tried to execute the test report for adobe forms
FP_EXAMPLE_01 but it gave following error
SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP response contains unexpected content-type(100,101).
is it due to improper configuration of ADS? we checked the ADS connection from SM59 which is ok and also the service /sap/bc/fp through internet which is also ok.
Thanks in advance.
Regards
Rajeev

hello
i guess there was the problem of ADSUSER. Now i corrected that and the report FP_PDF_TEST_00 gives proper version of ADS.
But when i execute test report FP_TEST_00 it asks me about printer and when i clicked Print Preview it gave following error
"ADS: Request start time: Mon Jan 14 06:16:01 EST 2008(200101)".
when debugged the code i found error in the class "CL_FP_PDF_OBJECT->execute_internal()" method which is getting called from the FM FPCOMP_CREATE_PDX with error code as "l_errcode = cpdfe_pdf_exe_print_adserror"
but couldn't make anything from that. any clues?
Regards
Rajeev

Time out error while running the FR report on Workspace

Hi,
We are working on Hyperion system 9.3.1 financial reporting with Essbase as a data source.
We have built a report, which has many computation, conditional formatting, suppression condtion.Report has around 100 columns.
Now when we are try to open this report on workspace, report is throwing the "Server time out" error meassage. error meassage is-
"The requested item could not be loaded by thr proxy. Timed out".
Reports are opening fine with less data or if essbase cube doesn't have any data.
Please suggest us on this issue. Do we need to set any setting at Essbase level or workspace level or any other way.
Any help will be appriciated.
Thanks & Regards,
Mohit Jain

I would suggest by saying that 100 columns seems quite a lot, you mention there are many computation columns, these should be pushed back onto the server to calculate.
We have also experienced issues where reports we pulling back lots of columns that were dynamically calculated.
To narrow down the actual problem you can try the following, the see if the report runs with the change, if not continue with the next steps:
- remove all formatting from the spreadsheet;
- remove all calculations from the spreadsheet;
- see if the report can be built more efficiently, by moving items to Grid POV or using same as, or reordering dimensions in inverse outline order;
If it still doesn't run, then try removing columns until it can run.
Cheers, Iain

Time out error while executing BW query from SRST

Hello Experts,
While running a query from SRST t-code im getting time out dump.
Is there any possibility to run the query in background to avoid dumps, apart from taking the report and executing from SE 38
Regards,
Arjun Reddy.

Hi,
Your target may have huge and report may be trying to extract whole data.
please try to your report with some selections/filters and check it.
it may work.
Thanks

Error while executing a local report

Hi Experts,
On the SharePoint site, in Report Setting, i am able to see the reports available in the SCL system. Few of them are supposed to be executed in the ECC system and some of them are local reports (which should be run in the SCL system itself).
When i try to Run the report "Display User names as a list output" which is shipped by Duet Enterprise, i am getting an error.
Could you please let me know where should i find the root cause of this issue?
Note: i have checked for possible logs in /IWFND/VIEW_LOG but could not find any entry for the given Co-relation id. And there is one entry for "BULK READ" operation in Success state for my user.
~ Ramanath.

Hi Ramanath,
can you check the SharePoint logs (e.g. via the ULS Viewer)?
What errors do you see in the logs there?
If the call made it to the SCL you should see something either in SRTUTIL -> Error log or like you outlined in /IWFND/VIEW_LOG.
In order to use the local reports on the SCL you have to run the report /IWCNT/DEMO_REP_LP_CONFIG which performs required configuration stesp (e.g. create logical ports, create number range, ...). Did you do that?
Thanks,
Holger.

TIME_OUT error while executing an ABAP report

Hi All,
I have an ABAP report in which the code looks like below
LOOP AT pernr_tab . " *Internal table consists of around 25k records*
   IF last_run_date IS INITIAL. " Initial Load
      PERFORM fill_data USING pernr_tab-pernr last_run_date CHANGING lv_flag.
      lv_flag = 'x'.
      initial_count = initial_count + 1.
    ELSE.
      PERFORM fill_data USING pernr_tab-pernr last_run_date CHANGING lv_flag.
      IF pernr_tab-status EQ '3' AND pernr_tab-begda GE today. " Future Hire records during delta load
        lv_flag = 'x'.
      ENDIF.
      IF lv_flag EQ 'x'.
        delta_change_count = delta_change_count + 1.
      ENDIF.
    ENDIF.
    IF lv_flag = 'x'. "initial load or changes in some infotype for delta load
      PERFORM append_data.
      CLEAR: p0000_tab[],p0000,p0001_tab[],p0001,p0002_tab[],p0002,p0006_tab[],p0006,p0006_phone,
p0007_tab[],p0007,p0027_tab[],p0027,p0032_tab[],p0032,p0105_tab_usr[],p0041_tab[],p0041.
      CLEAR: p0105_usr,p0105_tab_ven[],p0105_ven,p0105_tab_mgr[],p0105_mgr,p0709_tab[],p0709,pos_id,
functional_title,p0521_tab[],p0521,p2001_tab[],p2001,corporate_band_code,corporate_title_code,wa_pernr_tab.
    ENDIF.
ENDLOOP.
inside the loop i am fetching data from 10 different infotypes and adding into another internal table.When I execute this program it is giving TIME_OUT error.Is there any way i can resolve this issue(I dont want to run this program in the background)
Thanks
Bala Duvvuri
Edited by: Bala Duvvuri on Jul 13, 2010 8:25 AM
Edited by: Thomas Zloch on Jul 13, 2010 4:58 PM - line width reduced

fill_data
reading 10 infotypes
call function 'HR_READ_INFOTYPE'
exporting
*     TCLAS                 = 'A'
    pernr                 = p_pernr_tab_pernr
    infty                 = '0000'
   begda                 = '18000101'
   endda                 = '99991231'
*   bypass_buffer         = 'X'
tables
    infty_tab             = p0000_tab
exceptions
   infty_not_found       = 1
   others                = 2
if sy-subrc <> 0.
endif.
if p0000_tab[] is not initial.
    sort p0000_tab by endda descending.
    read table p0000_tab into p0000 index 1.
    if p0000-aedtm ge last_run_date.
      lv_flag = 'X' ." Infotype 0 has been changed
    endif.
endif.
append_data
assigning 50 different fields from above infotypes to ls_emp_data
ls_emp_data-functional_title = functional_title.
ls_emp_data-last_update = today.
if ( p2001-awart = '5006' and p2001-begda <= today and p2001-endda >= today ) or
( p0521-atzph = 'AB' AND p0521-begda <= today AND p0521-endda >= today ).
    ls_emp_data-absent = text-007.
ELSE.
    ls_emp_data-absent = text-008.
ENDIF.
ls_emp_data-corporate_band_code = corporate_band_code.
ls_emp_data-corporate_title_code = corporate_title_code.
APPEND ls_emp_data TO lt_emp_data.
CLEAR:ls_emp_data,lv_flag.
Thanks
Bala Duvvuri
Edited by: Thomas Zloch on Jul 14, 2010 2:48 PM - code tags added

Error while executing WAD report

Hi Gurus,
While executing the wad report in the web getting an error, can u brief me, and provide me any step by step procedure for WAD template creation
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
DROPDOWN_ITEM_1
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provider

can u brief me, and provide me any step by step procedure for WAD template creation
I believe you have already posted a Q on Dashboards
Re: DashBords
& many have responded with documentation links that can help. I suggest you take time to go thru' the links.
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
You need to first create a Data Provider, say DP1, on either an InfoProvider/Query/QueryView to be able to bind it to any webitem in a WAD template. Once created, assign DP1 to ANALYSIS_ITEM_1 under Data Binding properties.
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provide
Create DP2 first & then have it assigned to the DROPDOWN_ITEM_1 under Data Binding properties.

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Error while executing the report FAGLB03

Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
Venkat

Hi,
Please refer the below note.
1361304.
Reg
Madhu M

Time Our Error while executing a BW reports.

Similar Messages

Maybe you are looking for