Time Out and slow performance of query

Hi Experts,
We have a multiprovider giving sales and stock data.we have 1000 article 200 sites this query doesn't respond at all.It is either timed out or analyzer status is not responding. However on single article input ,the query responds in 60 sec.Please help.
Best gds
SumaMani

Hi,
Did you give the query in RSRT and click on Performance info.
It will give some message so that you can take steps to improve the performance of the query.
Regards,
Rama Murthy.

Similar Messages

TIME-OUT error in BSAK select query(Progress Indicator is also used)

Hi,
    In my report program one select query is there on BSAK table, which is as follows --
       SELECT BUKRS
                     BELNR
                    GJAHR
                    SHKZG
                    BSCHL
                    UMSKZ
                    LIFNR
                    EBELN
                    EBELP
                    WRBTR
                    DMBTR
                    XZAHL
                    REBZG
                   AUGBL
                   BLART
                   AUFNR
                   AUGDT
                   BUZEI FROM BSAK
                              INTO TABLE IT_BSAK
                              FOR ALL ENTRIES IN IT_BKPF1
                               WHERE BUKRS = IT_BKPF1-BUKRS
                                            AND AUGDT = IT_BKPF1-BUDAT
                                            AND AUGBL = IT_BKPF1-BELNR
                                            AND BSCHL IN ('31' , '29', '26', '39', '25').
I used Progress Indicator befor running this query and after this query also. But still It's giving me TIME-OUT error in this select query only.
I run the same query for 10 records in IT_BKPF1 table, it runs perfectly. But when I run it for 1000 records it giving dump.
And in actual bussiness my records are always more than 100 only.
I also check the indexing. It having secondary indexing on this BUKRS, AUGDT, AUGBL fields. Then also it's giving error.
so, How can I solve this dump..?? What could be the reason..??
Thanks in advance...!!
Regards,
Poonam.

Hi Poonam Patil,
Try to provide BELNR and GJAHR in where condition...
BKPF-DBBLG ==> BSAK-BELNR
Also check
BKPF-BLDAT ==> BSAK-AUGDT
Check out above relation...
If data is there in these fields of the table and both are matching then you can pass it and as they are in primary key of BSAK it will improve the performance...
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7
ilesh Nandaniya

Process chains time outs and hangs with no error msg - in SP13

Hi all,
We are having all kind of weird problems after we patched our system with SP13. Our process chain time outs and hangs, but surprisingly we never get any error msg. And scarier part is, the problem seems to be intermittent. PC runs fine on some days and hangs on some.
Further analysis into the dump as below
Termination occurred in the ABAP program "SAPLRSSM" -
in "RSSM_SLEEP_DEBUG".
The main program was "SAPMSSY1 ".
In the source code the termination point is in (Include) program "LRSSMU39".
This refers to an issue that appears to have been addressed by OSS Note
934648(meant for SP8). This notes also indicates to populate RSADMIN table to
exclude "RSSM_SLEEP_DEBUG". Not sure if this note is valid for SP13? However we went ahead and populated the RSADMIN table.
So now we have no clue whats going on and where to fix the issue.
As per SAP suggestion we applied the following notes:
0000653996 Analyzing lock situations
0000893563 Correction: Deadlock on completion of a remote chain
0000994007 Corrections: Deadlock with external status query
0001005481 Correction: Process successful, but there is no instance
0001047174 Correction: Incorrect scope when locking in process chains
0001051957 Correction: TIME_OUT during dialog confirmation of processes
0001083660 Report for error stack analysis
Nothing seems to help us. And SAP suggested a few options, which we implemented to no rescue.
Im sure that many of the customers have applied SP13, and want some feedback from them, if this is happening in their systems too?
If so, how did you fix this issue?
Or this situation is unique to us?Please note that no settings were changed as of SP13 to that of what they were in SP12(unless it is a side effect of the patch itself). Everything worked fine with SP12 and is still working on the BIP system. All the problems are in BIQ patched to SP13.
Any pointers or insight would be appreciated. We have a customer msg open with SAP, and going back and forth, but nothing seemed to work as of today.
Thanks,
Voodi

Not sure which OSS helped us get past the issue, as SAP asked us to apply a ton of notes. But along which the notes, SAP has some suggestions for us, which we think did the magic. After the implementation of the suggestin we never faced the same issue again. The suggestion by SAP:
move the process chain callback in a batch job by executing
program RSSM_TRACE_SWITCH and selecting the flag "verifcation
of asynchronous processes - execute in batch".
Lemme know if this doesnt fix the issue, I can give all the notes that SAP asked us to apply.
Message was edited by:
voodi

Can the wireless card in my mac wear out and slow down internet connection??

can the wireless card in my mac wear out and slow down internet connection??

Yes the WiFi card can wear out but not what you would really call wearing out like a pair of pants do. It can start to fail causing the connection between your computer and your Wifi router to slow down, IE transmit and receive less data in a given time period. And then it will fail completely.
But as to your internet connection being affected by a failing WiFi card no that can't happen.
If you turn the WiFi off and connect the computer to your router with an Ethernet cable does your internet browsing and downloading speed increase? If it does then there may be something wrong with the WiFi card in your computer or the WiFi section of your router. Hard to say which.
If after connecting the computer to your router with an Ethernet cable and your speeds do not increase then it is a problem with the router or on your ISPs end.

Laggy and Slow Performance

We are an architectural company, and we use photoshop to create masterplanning, arhitectural, landscape plans. So keep in mind that theres a bunch of layers with drop shadow, textures, bevel & emboss etc in it.
We recently upgraded to CS6, our PC's are installed with Windows 7 64-bit, 16 Gb or RAM, 1 Gb NVIDIA Quadro 2000D Graphics cards.
As Graphics Support, I make sure that updates, fixes are installed and all that stuff. But still, we experience some laggy and slow performance from Photoshop. The file is 660 MB, and is set to 150 Resolution. Takes a while to open, I can understand that it might be reading all those details, but once opened you wont get a realtime response from Photoshop. This happend before but was able to fix with the update that Adobe had released.
With our PC build, I cant find any reason why would still we get this kind of performance.
Please let me know if you have some solution to this.
Thanks.

CUDA is (and always will be) NVIDIA Proprietary.
Apple has made a strong commitment to OpenCL (not to be confused with OpenGL) to harness the power of every manufacturer's GPU. OpenCL will work with NVIDIA/CUDA or AMD cards.
Adobe has committed to OpenCL for the newest versions of their Premiere PRO CC software.
http://blogs.adobe.com/premierepro/2013/06/adobe-premiere-pro-cc-and-gpu-support .html
In my opinion it is only a matter of time before most production software supports OpenCL.
Gaming, on the other hand, may not feel that same pressure. Those guys tend to do what they want.
Any thoughts on how dramatically a second display would affect performance?
A second display does not seem to affect these cards in any sort of perceptible way.

My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. Please help.

My iPad 2 will not allow me to update my apps. When I hit the update button I get a spinning circle but then it times out and doesn't update. In the past when I have updated successfully, the spinning circle would show me an indicator of time left on the update. I no longer have this Indicator. The circle just spins and times out and nothing happens. I've reset the iPad in the settings menu, reset the router, logged in and out of Apple id, powered ithe iPad off and on, and tried a couple other "fixes" that I've read online. So far no luck. AAny help would be greatly appreciated. Much thanks!

How much free space do you have? If it is low, installers may not be able to run properly.

HT203200 I have a song that I purchased from Itunes on my Iphone and there was an error downloading. Every time i try to download it times out and says to try again. I have tried several times and still get same message. Help?

I have a song that I purchased from Itunes on my Iphone and there was an error downloading. Every time i try to download it times out and says to try again. I have tried several times and still get same message. Help? I have been charged for this song but have not been able to download.

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Just bought the ipad4 and can't log into facebook. Times out and tells me to check my network connection. Anyone having the same problem or any ideas?

Just bought the ipad4 and can't log into facebook. Times out and tells me to check my network connection. Anyone having the same problem or any ideas?

Hey barnsieno10,
Thanks for using Apple Support Communities.
Looks like sign in issue, This article is a great resource for the message you are receiving.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
Have a nice day,
Mario

I had to restore my iPad mini. Now when I go to the App Store and tap the cloud to reload some of my apps, it times out and they won't load. Any suggestions?

i had to restore my iPad mini and when I go to the App Store to reload some of my apps it times out and doesnt reload them. Any suggestions?

Close the App Store app and reset your iPad.
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
In order to reset your iPad, hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears on the screen after which time you can release the buttons and let the iPad start up.
IF that didn't help, try turning WiFi off on your iPad in the Settings, restart the iPad, then turn Wifi on again.

I have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

have a Mac Book and purchased a Bose system that uses an antenna to play music from the the laptop - it works great, but the computer times out and shuts down - Help

Check in "System Preferences">"Energy Saver" to see if you have the "Computer Sleep" bar set too low.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems.

Hi, every time i try downloading ios5 it reaches 100% and then the connection times out and nothing happens after that; though the internet connection is fine as i can access other sites etc. what could be the problem?i tried using 2 different modems. Where can i download the ios5 from as my itunes is on my desktop which uses windows xp. Please help

Download iOS 5.1
iOS 5.1 (build 9B176) is compatible with iPad 1, iPad 2, iPhone 3GS, iPhone 4, iPhone 4S, iPod touch 3rd & 4th gen, and iPad 3. Additional builds are available for Apple TV 2 and Apple TV 3. The below download links are all direct downloads of iOS 5.1 from Apple.
iPad 1
iPad 2 Wi-Fi
iPad 2 GSM (AT&T)
iPad 2 CDMA (Verizon)
iPad 2,4
iPhone 3GS
iPhone 4 GSM (AT&T)
iPhone 4 CDMA (Verizon)
iPhone 4S
iPod touch 3G
iPod touch 4G
iPad 3 Wi-Fi
iPad 3 GSM
iPad 3 CDMA
Apple TV 2 (9B179b1)
Apple TV 3 (9B179b1)
Source: http://osxdaily.com/2012/03/07/ios-5-1-download/

Airport times out and have to restart

airport times out and have to restart constantly

I have exactly the same problem. It started a few weeks ago and the helpline could not work out the problem, so they sent me a new HUB 2.0. Ever since, the broadband connection keeps stopping every day several times a day, which is a real pain as I work from home.
I've just ran InSSider and there are two NETGEAR SSIDs on the same channel as mine (11). Would this affect / be part of problem? There are other SSIDs on channels 1,6,7 and 13. Not very techie, so would appreciate very basic advice!

I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?

I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?

Thanks for the quick reply.
So am I correct in saying trying to utilise the Airport Express to access the printer over the network was a wasted effort due to the latest iOS? I had read up on the express before purchase and believed that was one of it's main purposes.
Thanks again for the help.

Trouble sending small MP3 files using firefox version of my AOL e-mail..times out and refuses to send. Works in Safari. Why?

If I try to send Mp3 files over e-mail using Firefox..it times out and says 'Encountered an error. I have these MP3's compressed to under 1 MB..like 756kb..so size is not an issue. No problem when I open my e-mail in Safari

Hi petro_jemes,
Just a little claritification, you need to add the value to the variable "[string]$ou", and also change the language in the variable "$emailbody" in the function "Get-ADUserPasswordExpirationDate".
I hope this helps.

Authentication time-outs and delays

hello
we have got a scenario which our enterprise environment discovered as authentication time-outs and delays , the all authentication is NTLM only , we also using many devices such as smartphone and other moiled components ,any option or way to get fix
that kind of issue
thanks in advanced
ivan bikmbauer

On Mon, 25 Aug 2014 11:37:47 +0000, Shuki Noy wrote:
ask me security question
but ask something very complicated
This has nothing to do with your technical knowledge, the issue here is
that you're artificially attempting to increase your forum points by
creating fake profiles, posting "questions", posting responses using your
own profile and then using the fake profiles to mark your own responses as
"answers".
I am not going to continue this discussion in the forum as it is off-topic
and wastes everyone's time.
I notice that you didn't answer my questions about your TechNet Gallery
contributions.
If you want to continue this discussion then you can do so over email. My
email address is pkadare @ gmail.com
Paul Adare - FIM CM MVP
"Quoted-Printable: a standard for mangling Internet messages
Quoted-Unreadable: the result of applying said standard
Unquoted-Unprintable: the comments from the recipients of the above" -- bf8

Time Out and slow performance of query

Similar Messages

Maybe you are looking for