Time Out block to broadband from kids

Does anyone know if there is a timer I can set somewhere to block broadband availabilty at relevant times please. I need to have a switch off time to stop the children using it until late

As many parents have found, all the child has to do is carry out a factory reset of the Homehub which turns off all the blocks that were put on by the parent.
I don't use the parental controls but I think the new BT parental controls, as per the link, are network based and resetting the Homehub would have no effect.
http://www.productsandservices.bt.com/consumerProducts/displayTopic.do?topicId=37062&s_cid=con_FURL_...
They also work on all devices that access the Internet through the Homehub so even if the child borrows a friend device/phone the blocks are still applied.
I think that some lateral thinking is needed when setting things up so that you may need to think when do I want access rather than when do I not want access but other than that I think it is easy to use.

Similar Messages

Time out when seinding Idocs from XI to receiving system

Hi All,
we have implemented a file to Idoc scenario in our XI test environment.
When sending more than one file at a time (containing one record -> 1 Idoc after conversion) XI creates the Idocs but gets a time out when passing the Idocs to the receiving SAP 4.6C system. We find the messages blocked in transaction SM58 with the status message "Transaction recorded" and on the XI system short dumps are created with the time out error message.
Does anyone know this problem and can give us some hints how to resolve it ?
Thanks in advance,
Christiane

Christiane,
Check your partner profiles in the target R/3 system. Use Tcode WE20 and check the inbound parameters option to see if the radio button 'Process Immediately' is switched on. If yes, change this to 'Process by background program'.
This way, the IDOC will be created in your system with status 64. You can then use program RBDAPP01 in the R/3 system to post these IDOCs to application.
The reason I say this is, sometimes, posting applicaitons may take a long time thereby resulting in timeout. If this is not the actual reason, atleast this will lead you to the correct problem.
Try this and let me know what's happening.
KK

System time out when saving report from portal

Hi,
We have a problem where the report output either gets time out or gives an output after 30 minutes if we try to save a report from portal in the form of excel.( report is run on the web)
Generally the query output has not more then 32k records.
Is it the number of records in the portal output which is the cause of the issue??
This is not the issue with the reports with leess number of records.
Can we do something to improve the performance here??
Thanks
Ajeet

Try creating aggrates on the cube. this may change the performance.
also you can change the query execution time.
but better check for some performance tuning by using aggrates.
check below suggestions also:
query execution
regard: gaurave

Time Out Issue When Converting from PDF to .doc or .dox format

I have a couple of PDF documents that I'm trying to convert to word doc (doc or dox) format. I subscribe to the online Adobe Export PDF. The export always times out. The PDF is 18.08 MB. Does anyone have have any suggestions?

Hi riversideredhead63,
Are you able to convert other PDFs without issue? Here are a few things to try for starters:
Clear your browser cache (steps vary by browser).
If you're using a work computer, check with your IT team to confirm if you have firewall/proxy settings that restrict the ability to upload files to the Internet.
Try another web browser. A list of supported browsers for accessing the ExportPDF service is available here: http://www.adobe.com/acom/systemreqs/
If those don't work, please get back to us. It would be helpful to know what sort of content is in the PDF file that you're trying to convert, and what application created the PDF. (If you don't know, choose File > Properties in Reader. The source application is listed in the middle of the dialog box.)
I look forward to hearing back from you.
Best,
Sara

Pages slow to load or do not load, then time out, sometimes stopping page from loading will reveal it or stopping and refreshing it, though not always.

pages will not always load or take forever, if i stop it from loading and refresh it it may load right away though not always. It is like the old days @ 33K, never used to happen, basically have all the same plugins have always had.
has been doing this for several months now, finally can't take it any more, all malware, virus, scans are clean, settings are the same for last ? years.
do get script problems from time to time but not very often.
loading say New egg, will take forever or will not completely load page, have backed up all bookmarks, etc: removed and reinstalled but no change.
any Ideas would be of great help. I have been using Firefox, since it's inception and don't want to switch browsers.
Thank You,
Mark

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

JDBC connection to Oracle 10g RAC periodically times out

I've been banging my head against the wall for months now and can't figure out why this is and what's causing it.
We have 6x CF8 servers in our environment. 3 of which work perfectly and the other 3 have the following problem. All 6 machines were installed at the same time and followed the exact same installation plan.
When I configure Oracle RAC data source, some of the machines time-out connecting to Oracle from time-to-time.
Config:
Solaris 9 on both CF and Oracle
CF8 Enterprise with the latest updater.
Apache 2 (not that it's relevant)
6 machines, load-balanced (not clustered), identical install and configuration.
data source config:
JDBC URL: jdbc:macromedia:oracle://10.0.0.3:1521;serviceName=dbname.ourdomain.com;AlternateServers= (10.0.0.4:1521);LoadBalancing=true
DRIVER CLASS: macromedia.jdbc.MacromediaDriver
The problem:
Every few minutes, CF starts hanging requests that deal with a specific RAC only data source. After about 30 seconds, all requests bail and generate this error in cfserver.log:
A non-SQL error occurred while requesting a connection from dbsource.
Timed out trying to establish connection
This happens with any RAC data source on the "bad" servers while the "good" servers don't have this problem. The "bad" server doesn't have any problems with direct (non-rac) Oracle data source.
Already tried:
Moving server connections around on a switch (rulling out bad switch port)
Copying driver from the healthy server (but it's the same installer anyway)
Changed from RAC to normal Oracle type data source - works perfectly. So at the moment I have 3 servers connecting to a specific oracle instance and the other 3 connecting to RAC.
Tried googling and searching forums and even Oracle metalink - nothing I could see relevant to this.
It's a shame that after spending a ton of money on CF8 upgrades and Oracle RAC, we can't really utilize fail-over on the database connection.
Any takers?
Thanks,
Henry

I have the following in my CLASSPATH:
C:\Ora10g1\product\10.2.0\db_1\jdbc\lib\jdbc.jar;
C:\Ora10g1\product\10.2.0\db_1\jdbc\lib\ojdbc14.jar;
C:\Ora10g1\product\10.2.0\db_1\jlib\jndi.jar;
C:\Ora10g1\product\10.2.0\db_1\jlib\orai18n.jar;
Still 'Cannot find type 'oracle.jdbc.pool.OracleDataSource'
Thanks

Query Running Time Out

Hi Friends,
now here i have question. from st22 we can get list of query time out in production and from error log by fill_sp function we can get ABAP program name from which we can get querie's detail like name, cube name etc...
but i am facing some of the query time out gives ABAP program name but cannt get query info from that !!! i tried it by se38 by that also i didnt find all the query info for few time out. is there any way i can get info for those query time out ??
please reply to my as i am new to this forums....last time when i asked questions noone replied me !!!
waiting for help !!

Hi,
if my question is not clear then let me just ask in general.
from st22 how can i get query name which have been time out ??
can u please elaborate the process ?
thank you in advance and i will give the points once i get the solution.

Time out function in VISA configure serial port vi

I have some doubts regarding the time out functionality of "VISA configure serial port vi":
1) I have set the time out value as 10s while initializing the port using this vi. Does this mean that for any Rx operation happening on the serial port, it will wait for 10s for the data to be received?
2) Is this waiting functionality also valid on "bytes at port" vi which I am using before reading the port data?
Because in my application, the control at serial port is actually not waiting for 10s and is coming out before the desired time out (10s). Do I need to set this time out anywhere else apart from initialization at "VISA configure serial port vi"??
Can anyone please tell the steps to set this timeout for the serial port?
Thanks in advance!

1. A read will return when the first of the following is satisfied:
a. The number of bytes at byte count has been received.
b. The termination character (if enabled) has been received.
c. An error is detected.
d. The timeout time has elapsed.
I am not sure what happens if handshaking is enabled and the other device pauses communication.
2. No. Bytes at port returns immediately. This is a status check and it would not make sense for a timeout to apply.
Without seeing your code and the data the remote device is sending, we can only guess. My first guess would be that you have termination characters enabled (default) and a termination character appears in your data.
Lynn

Dir API - Web services Time out

Hi All,
I am using Dir API web services to make some mass updates to Config objects. I have developed a client in Java and was able to access/edit the ID objects. The problem I am facing is since the number of objects in the change list is huge ( >1000), the web services time out.
I tried to set the time out parameter for the web service call using
context.put(BindingProviderProperties.REQUEST_TIMEOUT, 600*1000);
also,
context.put("com.sun.xml.ws.connect.timeout", 600*1000);
context.put("com.sun.xml.ws.request.timeout", 600*1000);
None of them seem to have any impact.
Any ideas what is the correct way to adjust this time out behaviour?
Thanks
Jai

Hi RK,
Thanks for that. I am not looking at changing the time outs at Server. I am just interested in changing the time outs for the request I make from the client. The point is I do not want to impact any other services running in the server.
In WS Navigator, it seems possible to change the time out value using Invocation parameters. (Did not try this yet!!)
So it must be possible to set the time out for the request from the client.
Thanks
Jai
Edited by: Jaishankar on Aug 25, 2011 2:49 PM

HT4962 Any ideas how to get my software updated on my IPOD 3rd Generation when my computer times out? I have tried several times and it appears to take 30 plus hours. How Frustrating, not to mention the kids are too!

Any ideas how to get my software updated on my IPOD 3rd Generation when my computer times out? I have tried several times and it appears to take 30 plus hours. How Frustrating, not to mention the kids are too!

If the iTunes purchases are not in your iTunes library you can redownload them by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If you restore from backup, not that synced media like apps and music are not included in the backup and thus if those items are not in the iTunes library they can't be restored to the iPod during the latter part of the restore process.

Time outs when redirected from RDS CB to RDSH

Hi,
I'm troubleshooting connectivity for the following setup:
1x RD Gateway server
1x RD Connection Broker Server also License server
1x RD Web server
1x RDSH server with multiple RemoteApps
Gateway is configured to allow bypass for local connections. Certificate has the correct name and is successfully installed. Certificate is from an internet CA.
When users come in over the internet RemoteApps launch pretty quickly every time. When users connect over the LAN RemoteApps launch successfully but much slower. When users connect over some VPN connections the connection times out when launching
a RemoteApp.
Over VPN I can see a successfull CAP and RAP in the Gateway Event log. I can also see a successful connection and successful redirection from the gateway to the connection broker over HTTP. In the SessionBroker log I can see a successful connection, but
then when the redirect to RDSH is attempted event 819 occurs "This connection request has timed out. User could not log on to the end point within the alloted time. Remote Desktop Connection Broker will stop monitoring this connection request."
When you connect over the LAN it takes longer but successfully redirects, and when connecting over the internet (non VPN) it connects quickly and successfully.
Any ideas?
Thanks
Tim

Hi Tim,
What’s your server and client version you are using?
Please uncheck the option “Bypass RD Gateway for local address” for gateway setting and verify whether there is any improvement in connections. Also as you have commented that you are receiving time out when you use VPN connection, please see whether there
is any blockage from firewall side for not allowing VPN connection to make the connections.
This might also occur due to antivirus or other 3rd party related software. Because as you can connect directly from internet without any issue but there is some problem with internal LAN and VPN connection, So seems issue with internal firewall\antivirus.
Please check whether it is not blocked or any policy applied for not allowing connection.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have an account in Adobe, but every time I work out on any product from Adobe products The program tells me I Trail You remove and re-install the program, but problem persists

I have an account in Adobe, but every time I work out on any product from Adobe products
The program tells me I Trail You remove and re-install the program, but problem persists

Hi mahmod alsousi,
Try this:
Sign out from the Creative Cloud app and Quit it (Quit option will be available after a few seconds).
Now move the following folders to desktop:
1) SLCache
Windows: OS Drive\Program Files (x86)\Common Files\Adobe
Mac: Library/Application Support/Adobe
2) SLStore
Windows: OS drive\ProgramData\Adobe
Mac: Library/Application Support/Adobe
3) OOBE
Windows: OS Drive\Users\<username>\AppData\Local\Adobe
Mac: /User/Library/Application Support/Adobe
Now launch Premiere Pro and sign in with your Adobe ID.
NOTE: Make sure your Anti Virus/Firewall is not blocking any Adobe activation servers. Alternately, you can also check your 'hosts' file for any changes.
Thanks,
Rameez

When I try to download anything from i tunes it is so slow it times out

When trying to download from i tunes the download time is horrendus (we are talkind days rather than hours or mins) and it usually times out (err 50) have done checks on my modem and broadband speed and both check out ok . Anybody help ?

Hey there: That doesn't sound like much fun :( I think it might be downloading fine. Go to tools > options > general > save files to see what folder things are being saved to and see if your files are there.
Here is an article with the specifics - [[Unable to download or save files]].
Hope that helps!

HT204406 I am having a very difficult time with accessing my music from the cloud. I need to have itunes open on my laptop in order for it to work. And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out.

I am having a very difficult time with accessing my music from the cloud. I need to have itunes open on my laptop in order for it to work. And as soon as I close out itunes on my laptop, it gives me a warning that all users will be logged out. Help!!!

Where are iTunes files located?
No, I do not mean just the music. Copying just the media/music files or the media folder creates problems.

Remote Desktop Connection Times Out With "Can't Connect" From One Specific Computer Only

This is an odd one... I manage several servers from this computer. This particular server, 2012 Essentials, won't allow for remote desktop connections to either the server or attached workstations. I can get into the server's remote web page but when I
attempt a remote desktop connection, it hangs on "Initiating remote connection..." and then times out with the error response that remote desktop can't connect. But... if I attempt the same connections from any other computer, I am able to get in
and utilize remote desktop. Does this mean that there is a certificate issue with the computer unable to connect and if so, how does one remedy this? Or is it some other issue? I've attempted everything within my technical ability to no avail. Any suggestions
are greatly appreciated.

Hi,
Before going further, would you please let me know the RDC version that used in the problematic computer? Was it the same with other computers?
Please temporarily disable firewall and then check if this issue can be solved. Based on your current description, it’s hard to say the root reason of this issue.
So, I suggest that you should check relevant log files and get some clues. It will help us to narrow down and solve your issue.
Hope this helps.
Best regards,
Justin Gu

Time Out block to broadband from kids

Similar Messages

Maybe you are looking for