Time Out by select on DD04L inner join DD04T
Hello,
I just installed ERP 2005. After the import of a language package (SMLT, IT, FR, ES) I get some problem.
If I logon with EN or IT (and I think with any language other than DE) many transaction get a Time Out error in the function module DDIF_FIELDINFO_GET by the following selection:
* get texts of primary language (inner join here !)
SELECT DD04L~ROLLNAME DD04L~DOMNAME DD04L~HEADLEN
DD04L~SCRLEN1 DD04L~SCRLEN2 DD04L~SCRLEN3
DD04T~DDLANGUAGE DD04T~DDTEXT DD04T~REPTEXT
DD04T~SCRTEXT_S DD04T~SCRTEXT_M DD04T~SCRTEXT_L
INTO TABLE Rolltexts
FROM DD04L inner JOIN DD04T
ON DD04T~ROLLNAME = DD04L~ROLLNAME AND
DD04T~AS4LOCAL = 'A' AND
DD04T~DDLANGUAGE = langu_loc
FOR ALL ENTRIES IN missing
WHERE DD04L~ROLLNAME = missing-ROLLNAME
AND DD04L~AS4LOCAL = 'A'.
That is, the ERP is using sequential read instead of direct read.
Any idea is welcomed.
Thanks & regards,
Tommaso
Hello,
Thanks for your replies.
I checked OSS and I found nothing.
ST05 gives me this SQL command: (more than 500 sec!)
SELECT T_00 . "ROLLNAME" , T_00 . "DOMNAME" , T_00 . "HEADLEN" , T_00 . "SCRLEN1" , T_00 . "SCRLEN2" , T_00 . "SCRLEN3" , T_01 . "DDLANGUAGE" , T_01 . "DDTEXT" , T_01 . "REPTEXT" , T_01 . "SCRTEXT_S" , T_01 . "SCRTEXT_M" , T_01 . "SCRTEXT_L" FROM "DD04L"
T_00 INNER JOIN "DD04T" T_01 ON T_01 . "ROLLNAME" = T_00 . "ROLLNAME" AND T_01 . "AS4LOCAL" = 'A' AND T_01 . "DDLANGUAGE" = 'I' WHERE T_00 . "ROLLNAME" = 'VAL_TEXT' AND T_00 . "AS4LOCAL" = 'A'
I executed it in SQL Studio and I got also a big execution time.
But if I try
SELECT "ROLLNAME" , "DOMNAME" , "HEADLEN" , "SCRLEN1" , "SCRLEN2" , "SCRLEN3" FROM "DD04L" WHERE T_00 . "ROLLNAME" = 'VAL_TEXT' AND T_00 . "AS4LOCAL" = 'A'
I get the result in 1 ms.
Is there something wrong in the inner join?
What does it mean the operation "REOPEN"?
How can I see from ST05 if an index has been used?
Thanks & Regards,
Tommaso
Similar Messages
-
Getting Time-Out at Select Query
Dear All,
I am getting Time-Out at particular Select Query.
This error i am getting since last 3 days, before it was working fine. And there is no any change made to program in last 3 days.
select a~qmnum
matnr
kunum
iwerk
spart
into corresponding fields of iviqmel
from ( qmih as a
inner join qmel as b on b~qmnum = a~qmnum )
for all entries in i_tab
where qmart in ('FS', 'ZP')
and iwerk = i_tab-iwerk
and matnr = i_tab-matnr
and kunum = i_tab-kunum
and spart = i_tab-spart.
append iviqmel.
endselect.
In Program table QMEL also using the proper Index.
Can you please give me any suggestion that how to come out from this issue.
Regards,
DharmeshHi Rob,
I run the SQL Trace also, Query is using correct Index.
and I had also chenge the select query.
if not i_tab[] is initial.
select a~matnr a~kunum a~spart
b~qmnum b~iwerk
into corresponding fields of table iviqmel
from qmel as a inner join
qmih as b
on a~qmnum = b~qmnum
for all entries in i_tab
where a~qmart in ('FS', 'ZP')
and a~matnr = i_tab-matnr
and a~kunum = i_tab-kunum
and a~spart = i_tab-spart
and b~iwerk = i_tab-iwerk.
endif.
even its geving time out error.
Regards,
Dharmesh -
Dear Experts,
I have writen a inner join code with MKPF and MSEG which taking too much time, while I have used index.
Indexes are:
MSEG
MATNR
WERKS
LGORT
BWART
SOBKZ
MKPF
BUDAT
MBLNR
My Select Query is :
SELECT B~MATNR
B~MAT_KDAUF
B~MAT_KDPOS
B~BWART
B~MENGE
B~MEINS
B~AUFNR
INTO TABLE IT_MSEG
FROM MKPF AS A
INNER JOIN MSEG AS B
ON AMBLNR EQ BMBLNR
AND AMJAHR EQ BMJAHR
WHERE A~BUDAT IN BUDAT
AND B~MATNR IN MATNR
AND B~WERKS IN WERKS
AND B~LGORT IN LGORT
AND B~BWART IN BWART.hi,
you can use for all entries it will work faster then joins
About it:*
FOR ALL ENTRIES WHERE
Syntax
... FOR ALL ENTRIES IN itab WHERE ... col operator itab-comp ...
Effect
If the addition FOR ALL ENTRIES is specified before the language element WHERE, then the components comp of the internal table itab can be used as operands when comparing with relational operators.
The internal table itab must have a structured line type and the component comp must be compatible with the column col.
The logical expression sql_cond of the WHERE condition can comprise various logical expressions by using AND and OR. However, if FOR ALL ENTRIES is specified, there must be at least one Comparison with a column of the internal table itab, which can be specified either statistically or dynamically (Release 6.40 and higher). In a statement with a SELECTstatement with FOR ALL ENTRIES, the addition ORDER BY can only be used with the addition PRIMARY KEY.
The whole logical expression sql_cond is evaluated for each individual line of the internal table itab. The resulting set of the SELECT statement is the union of the resulting sets from the individual evaluations. Duplicate lines are automatically removed from the resulting set. If the internal table itab is empty, the whole WHERE statement is ignored and all lines in the database are put in the resulting set.
Notes
In Release 6.10 and higher, the same internal table can be specified after FOR ALL ENTRIES and after INTO.
The addition FOR ALL ENTRIES is only possible before WHERE conditions of the SELECT statement.
Example
Exporting all flight data for a specified departure city. The relevant airlines and flight numbers are first put in an internal table entry_tab, which is evaluated in the WHERE condition of the subsquent SELECT statement.
PARAMETERS p_city TYPE spfli-cityfrom.
TYPES: BEGIN OF entry_tab_type,
carrid TYPE spfli-carrid,
connid TYPE spfli-connid,
END OF entry_tab_type.
DATA: entry_tab TYPE TABLE OF entry_tab_type,
sflight_tab TYPE SORTED TABLE OF sflight
WITH UNIQUE KEY carrid connid fldate.
SELECT carrid connid
FROM spfli
INTO CORRESPONDING FIELDS OF TABLE entry_tab
WHERE cityfrom = p_city.
SELECT carrid connid fldate
FROM sflight
INTO CORRESPONDING FIELDS OF TABLE sflight_tab
FOR ALL ENTRIES IN entry_tab
WHERE carrid = entry_tab-carrid AND
connid = entry_tab-connid.
hope it will help you
Rahul sharma
Edited by: RAHUL SHARMA on Sep 11, 2008 8:10 AM -
table
can any please modify the query
thanking in advance
BEGIN OF t_initord OCCURS 0,
vbeln LIKE vbak-vbeln, " Sales Order
posnr LIKE vbap-posnr, " Sales Order Line Item
auart LIKE vbak-auart, " Sales Order Type
bezei LIKE tvakt-bezei, " Sales Order Type Text
billdo Like vbrk-vbeln, "billing document number
matnr LIKE vbfa-matnr, " Material
maktx LIKE makt-maktx, " Material Description
bstnk LIKE vbak-bstnk, " Customer PO number
bukrs LIKE vbak-bukrs_vf, " Company Code..
vkorg LIKE vbak-vkorg, " Sales Org
vtweg LIKE vbak-vtweg, " Distribution Channel
spart LIKE vbak-spart, " Division
vkgrp LIKE vbak-vkgrp, " Sales Group
augru LIKE vbak-augru, " Order Reason
abgru LIKE vbap-abgru, " Reson for rejection
kwmeng LIKE vbap-kwmeng, " Order Line quantit
deliv LIKE likp-vbeln, " Delivery Number
delit LIKE lips-posnr, " Delivery Number
rfmng LIKE vbfa-rfmng, " Delivery Qty..
vbtyp_n LIKE vbfa-vbtyp_n, " R12 Defect 8938.
mrnkz LIKE vbkd-mrnkz, " Subsequent Invoicing
docurr LIKE vbak-waerk, " Document Currency
netwr LIKE vbap-netwr, " Line Item Amt in Doc curr
ocdate LIKE vbak-aedat, " Order change date
objnr LIKE vbap-objnr, " Object number
rad LIKE sy-datum, " Requested Arrival Date
submi LIKE ekko-submi, " Collective number
plant1 LIKE vbap-werks, " Supplying Plant
ernam LIKE vbak-ernam, " Order Created by
erdat LIKE vbak-erdat, " Order Created on
lifnr LIKE ekko-lifnr, " Vendor
soldto LIKE vbak-kunnr, " Sold-to Party
shipto LIKE vbak-kunnr, " Ship-to Party
etenr LIKE vbep-etenr, " Sales Order schedule line
bmeng LIKE vbep-bmeng, " Order Sch Line quantity
vrkme LIKE vbap-zieme, " Sales Order UOM
cad LIKE sy-datum, " Confirmed Arrival Date
ktokk LIKE lfa1-ktokk, " Vendor account group
docurramt LIKE vbap-netwr, " Document Currency Amount
locurr LIKE vbak-waerk, " Local Currency
locurramt LIKE vbap-netwr, " Local Currency Amount
werks1 LIKE vbap-werks, " Supplying Plant
werks_name1 LIKE t001w-name1, " Plant description
lifnr_name1 LIKE lfa1-name1, " Name of the Vendor
stat TYPE g_stat_typ, " Status Code
lstatus TYPE g_stext_typ, " Last Status
soappr TYPE tj30t-txt30, " Sales Order Approval
bdnum LIKE vbfa-vbeln, " Billing doc number
bdlin LIKE vbrp-posnr, " Billing Item
uecha_b LIKE vbrp-uecha, " Item of Batch split
uecha_d LIKE lips-uecha, " Item of Batch split
END OF t_initord.
This is the internal table
to get the details wrote a select query
can any one please correct the select query
SELECT t1vbeln t2posnr t1auart t4bezei
t2matnr t5maktx
t1bstnk t1bukrs_vf t1vkorg t1vtweg t1spart t1vkgrp
t1augru t2abgru t2kwmeng t8vbeln
t8posnn t8rfmng t8vbtyp_n t7mrnkz t2waerk t2netwr
t1aedat t1objnr t1vdatu t1submi t2werks t1ernam t1~erdat
t6lifnr t1kunnr t9~kunnr
INTO TABLE t_initord
FROM vbak AS t1
INNER JOIN vbap AS t2
ON t1vbeln EQ t2vbeln
LEFT OUTER JOIN tvakt AS t4
ON t1auart EQ t4auart
AND t4~spras EQ c_en
LEFT OUTER JOIN makt AS t5
ON t2matnr EQ t5matnr
AND t5~spras EQ c_en
LEFT OUTER JOIN vbpa AS t9
ON t1vbeln EQ t9vbeln
AND t9~parvw EQ c_we
LEFT OUTER JOIN ekko AS t6
ON t1submi EQ t6ebeln
LEFT OUTER JOIN vbkd AS t7
ON t1vbeln EQ t7vbeln AND
t7~posnr EQ c_initposnr
LEFT OUTER JOIN vbfa AS t8
ON t2vbeln EQ t8vbelv AND
t2posnr EQ t8posnv
WHERE t1~vbeln IN s_slord
AND t1~vkbur IN s_sloff
AND t1~vkgrp IN s_slgrp
AND t1~kunnr IN s_custag
AND t1~auart IN s_ortyp
AND t1~vkorg IN s_slorg
AND t1~vtweg IN s_disch
AND t1~spart IN s_divi
AND t1~erdat IN s_date
AND t1~bukrs_vf IN s_ccode
AND t2~ernam IN s_slcre.
i need to modify the above query to get the additional information into the above table
billing doument number
document currency
document currency amount
billed quantity
sold to country
ship to countryYou can also refer to this code... for making your code better..
SELECT MATNR
WERKS
DISMM
DISPO
BESKZ INTO TABLE I_MARC FROM MARC
WHERE WERKS IN S_WERKS AND BESKZ = 'F' AND DISMM <> 'ND'.
IF NOT I_MARC IS INITIAL.
SELECT MATNR
MAKTX INTO TABLE I_MAKT FROM MAKT
FOR ALL ENTRIES IN I_MARC
WHERE MATNR = I_MARC-MATNR.
ENDIF.
REFRESH I_MDPS.
REFRESH I_MDEZ.
REFRESH I_MT61D.
REFRESH I_MDPS2.
REFRESH I_MDEZ2.
LOOP AT I_MARC INTO WA_MARC.
CALL FUNCTION 'MD_STOCK_REQUIREMENTS_LIST_API'
EXPORTING
MATNR = WA_MARC-MATNR
WERKS = WA_MARC-WERKS
TABLES
MDEZX = I_MDEZ
EXCEPTIONS
MATERIAL_PLANT_NOT_FOUND = 1
PLANT_NOT_FOUND = 2
OTHERS = 3
LOOP AT I_MDEZ.
I_MDEZ2-MATNR = WA_MARC-MATNR.
I_MDEZ2-WERKS = WA_MARC-WERKS.
MOVE-CORRESPONDING I_MDEZ TO I_MDEZ2.
APPEND I_MDEZ2.
ENDLOOP.
CLEAR I_MDEZ.
CLEAR I_MDEZ2.
ENDLOOP.
Deleting teh records from the internal table which are
nither purchase order nor purchase requisition.
if pur_ord = 'X' and Pur_req = 'X'.
delete i_mdez2 where delkz <> 'BA' and delkz <> 'BE'.
endif.
if pur_ord = 'X' and Pur_req <> 'X'.
delete i_mdez2 where delkz <> 'BE'.
endif.
if pur_req = 'X' and pur_ord <> 'X'.
delete i_mdez2 where delkz <> 'BA'.
endif.
Populating the final internal table to be displayed.
Sort i_mdez2 by matnr werks.
SORT I_MAKT BY MATNR.
LOOP AT I_MDEZ2 WHERE LIFNR IN S_LIFNR.
wa_final-werks = i_mdez2-werks.
WA_FINAL-LIFNR = I_MDEZ2-LIFNR.
WA_FINAL-EXTRA = I_MDEZ2-EXTRA.
WA_FINAL-MNG01 = I_MDEZ2-MNG01.
WA_FINAL-AUSKT = I_MDEZ2-AUSKT.
WA_FINAL-UMDAT = I_MDEZ2-UMDAT.
WA_FINAL-WERKS = I_MDEZ2-WERKS.
WA_FINAL-MATNR = I_MDEZ2-MATNR.
wa_final-delkz = i_mdez2-delkz.
For Message to be displayed with the Purchase Order and Purchase Requisition.
PERFORM TEXT_EXCEPTION.
READ TABLE I_MAKT INTO WA_MAKT WITH KEY MATNR = WA_FINAL-MATNR BINARY SEARCH.
IF SY-SUBRC = 0.
WA_FINAL-MAKTX = WA_MAKT-MAKTX.
ENDIF.
APPEND WA_FINAL TO I_FINAL .
ENDLOOP.
IF SY-SUBRC <> 0.
MESSAGE I058.
leave program.
ENDIF.
Selecting the Purchase Organisation from the EKKO table.
if not i_final is initial.
SELECT EBELN EKORG LIFNR INTO TABLE I_EKKO FROM EKKO
FOR ALL ENTRIES IN I_FINAL
WHERE LIFNR = I_FINAL-LIFNR.
Selecting the name of the vendor from the LFA1 table.
select lifnr name1 into table i_lfa1 from lfa1
for all entries in i_final
where lifnr = i_final-lifnr.
Selecting the current date from the eban table.
select matnr lfdat into table i_eban from eban
for all entries in i_final
where matnr = i_final-matnr." and bnfpo = i_ekpo-bnfpo.
endif.
if not i_ekko is initial.
Selecting the Unit Price from EKPO for finding the Extended amount.
SELECT EBELN ebelp NETPR MATNR banfn bnfpo INTO TABLE I_EKPO FROM EKPO
FOR ALL ENTRIES IN I_EKKO
WHERE EBELN = I_EKKO-EBELN.
endif.
if not i_ekpo is initial.
Selecting the current date from the Eket table.
select ebeln ebelp eindt into table i_eket from eket
for all entries in i_ekpo
where ebeln = i_ekpo-ebeln and ebelp = i_ekpo-ebelp.
endif.
*Sorting the internal tables.
SORT I_EKKO BY LIFNR.
sort i_lfa1 by lifnr.
SORT I_EKPO BY MATNR.
sort i_eket by ebeln ebelp.
sort i_eban by matnr.
LOOP AT I_FINAL INTO WA_FINAL.
READ TABLE I_EKKO INTO WA_EKKO WITH KEY LIFNR = WA_FINAL-LIFNR.
WA_FINAL-EKORG = WA_EKKO-EKORG.
wa_final-ebeln = wa_ekko-ebeln.
read table i_lfa1 into wa_lfa1 with key lifnr = wa_final-lifnr.
wa_final-name1 = wa_lfa1-name1.
READ TABLE I_EKPO INTO WA_EKPO WITH KEY MATNR = WA_FINAL-MATNR.
wa_final-ebelp = wa_ekpo-ebelp.
WA_FINAL-NETPR = WA_EKPO-NETPR.
if wa_final-delkz = 'BA'.
read table i_eban into wa_eban with key matnr = wa_final-matnr.
wa_final-dat00 = wa_eban-lfdat.
endif.
if wa_final-delkz = 'BE'.
read table i_eket into wa_eket with key ebeln = wa_final-ebeln ebelp = wa_final-ebelp.
wa_final-dat00 = wa_eket-eindt.
endif.
WA_FINAL-EXTND_AMOUNT = WA_FINAL-MNG01 * WA_FINAL-NETPR.
MODIFY I_FINAL FROM WA_FINAL TRANSPORTING EKORG name1 dat00 EXTND_AMOUNT.
ENDLOOP.
In this I have taken many internal tables... according to the database table I am extracting from .. then I am bringing all the record in the final internal table which will be containing teh records from all the internal table that i have used..
Regards,
Jayant
<b>Please award if helpful</b> -
Hi all,
give me the query with innerjoin
Based on the input values of Material number (MARC-MATNR) from selection screen check and get the Special Procurement type details from MARC-SOBSL and Material description details from MAKT-MAKTX.
basha....
Moderator message - instead of asking, you should try to write the code yourself and get back to the forum if you have a specific question.
Edited by: Rob Burbank on Apr 19, 2009 4:46 PMHi,
Please Test the following Sample Code it is according to your requirement hope will solve out your problem,
TABLES: marc.
SELECt-OPTIONS somatnr for marc-matnr.
TYPES: BEGIN OF ty_matnr,
matnr LIKE marc-matnr,
sobsl LIKE marc-sobsl,
maktx LIKE makt-maktx,
END OF ty_matnr.
DATA: it_matnr TYPE STANDARD TABLE OF ty_matnr WITH HEADER LINE.
SELECT marc~matnr marc~sobsl makt~maktx
into CORRESPONDING FIELDS OF TABLE it_matnr
from marc INNER JOIN makt on ( marc~matnr eq makt~matnr )
WHERE marc~matnr in somatnr.
Best Regards,
Faisal -
Select SUM( ) in inner join - error in code
Hi All,
The following code is using ABAP OO and I get the following error
E:The addition "FOR ALL ENTRIES" excludes all aggregate functions with
the exception of "COUNT( * )", as the single element of the SELECT
clause.
Here is the Code:
select a/bic/ZEDM_ENTP amaterial a~/bic/zedm_stid
a/bic/ZEDM_SDT a/bic/ZEDM_MINH a~/bic/ZEDM_EHD
SUM( b~/bic/ZEDM_QPLN )
c~/bic/ZDEMQTY
from /bic/azdrp_1900 as a inner join /bic/azdrp_0400 as b
on
a/bic/ZEDM_ENTP = b/bic/ZEDM_ENTP and
amaterial = bmaterial and
a/bic/zedm_stid = bplant and
a/bic/ZEDM_SDT = b/bic/zedm_pshp
inner join /bic/azrp_0800 as C
on
amaterial = cmaterial and
a/bic/zedm_stid = c/bic/zedm_stid and
a/bic/ZEDM_SDT = c/bic/ZEDM_ESDT
into table z_it_inv for all entries in
RESULT_PACKAGE where
a~/bic/ZEDM_ENTP = RESULT_PACKAGE-/bic/ZEDM_ENTP
and a~material = RESULT_PACKAGE-material
and a~/bic/ZEDM_SDT = RESULT_PACKAGE-/BIC/OIZEDM_EDT
and a~/bic/zedm_stid = RESULT_PACKAGE-/BIC/OIZEDM_TOST
group by b/bic/ZEDM_ENTP bmaterial b~plant
b~/bic/zedm_pshp
Can you please tell me how to correct this?
ThanksHi,
You can get all records first and then LOOP AT Internal table and use COLLECT statement to sum up required column.
This will be a better idea than trying to use SUM in SELECT with JOINS.
ashish -
Issue when suming the field in Select query using inner join
Hi All,
SELECT A~OI_SHNUM
A~FORWAGENT
A~ROUTE
A~SHTYP
A~DTSHP_EACT
A~/BIC/GTCLICENS
A~/BIC/GTCADD04
A~COMP_CODE
SUM( C~GRS_WGT_DL )
C~UNIT_OF_WT
INTO TABLE I_LAYONE
FROM ( ( /BIC/ANTCD000200 AS A
INNER JOIN /BIC/AGSSD000700 AS B ON BOI_SHNUM = AOI_SHNUM )
INNER JOIN /BIC/AGSSD000600 AS C ON CDELIV_NUMB = BDELIV_NUMB ).
I need to sum the field C~GRS_WGT_DL
While compiling it show the error given below
The field "C~UNIT_OF_WT" from the SELECT list is is missing in the
GROUP BY clause. is missing in the GROUP BY clause. is missing in the
GROUP BY clause. is missing in the GROUP BY clause. is missing in the
GROUP BY clause. is "C~UNIT_OF_W
with regards,
ThambeHi,
Try the following SQL statement. Hope it helps you.
SELECT A~OI_SHNUM
A~FORWAGENT
A~ROUTE
A~SHTYP
A~DTSHP_EACT
A~/BIC/GTCLICENS
A~/BIC/GTCADD04
A~COMP_CODE
SUM( C~GRS_WGT_DL )
C~UNIT_OF_WT
INTO TABLE I_LAYONE
FROM ( ( /BIC/ANTCD000200 AS A
INNER JOIN /BIC/AGSSD000700 AS B ON BOI_SHNUM = AOI_SHNUM )
INNER JOIN /BIC/AGSSD000600 AS C ON CDELIV_NUMB = BDELIV_NUMB )
GROUP BY
A~OI_SHNUM
A~FORWAGENT
A~ROUTE
A~SHTYP
A~DTSHP_EACT
A~/BIC/GTCLICENS
A~/BIC/GTCADD04
A~COMP_CODE.
Murthy. -
Select-options: in inner join
in this peace of code i got error message like:
The column name "VBELN" has two meanings..
Please let me know how to resolve this <b>select-options:</b> problem
tables:vbap,lips,likp.
data: begin of first occurs 0,
vbeln1 like vbap-vbeln,
matnr2 like vbap-matnr,
werks3 like lips-werks,
route4 like likp-route,
end of first.
select-options: enter for vbap-vbeln.
select
a~vbeln
a~matnr
b~werks
c~route
into table first
from vbap as a
inner join lips as b
on avbeln = bvbeln
inner join likp as c
on bvbeln = cvbeln
<b> where vbeln in enter.</b>
loop at first.
write:/2 sy-vline, first-vbeln1,
sy-vline,first-matnr2,
sy-vline,first-werks3,
sy-vline,first-route4.
endloop.
Thanks In advance
~~SANDY~~~Hi,
Try this one,it is working fine,
tables:vbap,lips,likp.
data: begin of first occurs 0,
vbeln like vbap-vbeln,
matnr like vbap-matnr,
werks like lips-werks,
route like likp-route,
end of first.
select-options: enter for vbap-vbeln.
<b>select avbeln amatnr bwerks croute into corresponding fields of table first
from vbap as a inner join lips as b on avbeln = bvgbel
inner join likp as c on bvbeln = cvbeln
where a~vbeln in enter.</b>
loop at first.
write:/2 sy-vline, first-vbeln,
sy-vline,first-matnr,
sy-vline,first-werks,
sy-vline,first-route.
endloop.
Regards,
Padmam. -
Select querry using inner join
Hi Friends,
I need to fetch data from two tables, I used inner join but I am not able to fetch the data in some fields can any one tell me what is wrong in this select querry.
SELECT but000~partner
but000~name_org1
but000~name_first
but000~name_last
but000~bpext
FROM but000 INNER JOIN dfkkop ON but000partner = dfkkopgpart
INTO table lt_but000
WHERE but000~partner IN so_part
AND dfkkop~faedn IN so_faedn.
Thanx in advance,
Parvezhi Lutin,
SELECT but000~partner
but000~name_org1
but000~name_first
but000~name_last
but000~bpext
FROM but000 INNER JOIN dfkkop ON but000partner = dfkkopgpart <------check this condition,it has to *satisfy both table
INTO table lt_but000
WHERE but000~partner IN so_part
AND dfkkop~faedn IN so_faedn.
Regards,
siva
Message was edited by:
SivaKumar -
How to re-write this big SELECT Query with INNER JOINs?
Hi Experts
I have a performance killer SELECT query with an inner join of 3 tables u2013 VBAP, VBAK and VBEP together, which populates records to an internal table INT_COLL_ORD. Based on these records selected, in another SELECT query, records are fetched from VBUK table to the internal table INT_VBUK.
SELECT A~VBELN A~POSNR A~MATNR A~KWMENG A~KBMENG A~ERDAT A~ERZET A~PSTYV D~AUART E~ETTYP E~EDATU
INTO TABLE INT_TAB_RES
FROM VBAP AS A INNER JOIN VBAK AS D
ON D~VBELN EQ A~VBELN AND D~MANDT EQ A~MANDT
INNER JOIN VBEP AS E
ON E~VBELN EQ A~VBELN AND E~POSNR EQ A~POSNR AND E~MANDT EQ A~MANDT
WHERE A~VBELN IN s_VBELN AND
D~auart in s_auart AND
D~vkorg in s_vkorg AND
D~vbtyp eq 'C' AND
( ( matnr LIKE c_prefix_sp AND zz_msposnr NE 0 AND kbmeng EQ 0 )
OR ( matnr LIKE c_prefix_fp AND kwmeng NE A~kbmeng ) ) AND
A~ABGRU EQ SPACE AND
A~MTVFP IN R_MTVFP AND
A~PRCTR IN R_PRCT AND
E~ETENR EQ '1'.
SORT INT_COLL_ORD BY VBELN POSNR ETTYP.
DELETE ADJACENT DUPLICATES FROM INT_TAB_RES COMPARING VBELN POSNR.
CHECK NOT INT_TAB_RES [] IS INITIAL.
SELECT VBELN UVALL CMGST INTO TABLE INT_VBUK
FROM VBUK FOR ALL ENTRIES IN INT_TAB_RES
WHERE VBELN = INT_TAB_RES-VBELN AND UVALL NE 'A'.
Now, the requirement is:
I want to split this query. Like, first join VBAK and VBUK first. With this selection, go to the inner join of VBAP and VBEP (on key VBELN) to get the results. How can I re-write this Query?
Please help.
Thx n RgdsHi Nagraj
As of your suggestion, I have re-written the query as below:
* Declarations
TYPES: BEGIN OF TYP_COLL_ORD,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBUP-POSNR,
MATNR LIKE VBAP-MATNR,
KWMENG LIKE VBAP-KWMENG,
KBMENG LIKE VBAP-KBMENG,
ERDAT LIKE VBAK-ERDAT,
ERZET LIKE VBAK-ERZET,
PSTYV LIKE VBAP-PSTYV,
AUART LIKE VBAK-AUART, u201Calready exists in type
ETTYP LIKE VBEP-ETTYP,
EDATU LIKE VBEP-EDATU.
TYPES: END OF TYP_COLL_ORD.
DATA: INT_COLL_ORD TYPE TABLE OF TYP_COLL_ORD WITH HEADER LINE.
TYPES: BEGIN OF TYP_VBUK,
AUART LIKE VBAK-AUART, u201Chave added this field
VBELN LIKE VBUK-VBELN,
UVALL LIKE VBUK-UVALL,
CMGST LIKE VBUK-CMGST.
TYPES: END OF TYP_VBUK.
DATA: INT_VBUK TYPE TABLE OF TYP_VBUK WITH HEADER LINE.
*QUERY#1 u2013 for VBAK & VBUK Join
SELECT A~AUART B~VBELN B~UVALL B~CMGST
INTO TABLE INT_VBUK
FROM VBAK AS A INNER JOIN VBUK AS B
ON A~VBELN EQ B~VBELN
WHERE A~VBELN IN s_VBELN AND
A~auart in s_auart AND
A~vkorg in s_vkorg AND
A~vbtyp eq 'C' AND
B~UVALL NE 'A'.
IF NOT INT_VBUK[] IS INITIAL.
SORT INT_VBUK BY VBELN.
DELETE ADJACENT DUPLICATES FROM INT_VBUK COMPARING VBELN.
*QUERY#2 u2013 for VBAP & VBEP Join
SELECT A~VBELN A~POSNR A~MATNR A~KWMENG A~KBMENG A~ERDAT A~ERZET A~PSTYV B~ETTYP B~EDATU
INTO TABLE INT_COLL_ORD
FROM VBAP AS A INNER JOIN VBEP AS B
ON B~VBELN EQ A~VBELN AND B~POSNR EQ A~POSNR AND B~MANDT EQ A~MANDT
FOR ALL ENTRIES IN INT_VBUK
WHERE A~VBELN = INT_VBUK-VBELN AND
( ( matnr LIKE c_prefix_sp AND zz_msposnr NE 0 AND kbmeng EQ 0 )
OR ( matnr LIKE c_prefix_fp AND kwmeng NE A~kbmeng ) ) AND
A~ABGRU EQ SPACE AND
A~MTVFP IN R_MTVFP AND
A~PRCTR IN R_PRCT AND
B~ETENR EQ '1'.
ENDIF.
SORT INT_COLL_ORD BY VBELN POSNR ETTYP.
DELETE ADJACENT DUPLICATES FROM INT_COLL_ORD
COMPARING VBELN POSNR.
CHECK NOT INT_COLL_ORD[] IS INITIAL.
LOOP AT INT_COLL_ORD.
CLEAR: L_MTART,L_ATPPR,L_ETTYP.
IF L_PREVIOUS_ETTYP NE INT_COLL_ORD-ETTYP OR
L_PREVIOUS_AUART NE INT_COLL_ORD-AUART.
READ TABLE INT_OVRCTL WITH KEY AUART = INT_COLL_ORD-AUART ETTYP = INT_COLL_ORD-ETTYP.
CHECK SY-SUBRC NE 0.
Now, the issue is:
Please note that declaration for INT_COLL_ORD has a field AUART, which is used in further parts of program (see the statement just above)
But, since neither VBAP nor VBEP contains AUART field, it cannot be fetched through the QUERY#2. So this value is not populated into INT_COLL_ORD through SELECT Query.
Since this field is used in later part of program & that the internal table has no value for this field, it dumps!!
How to include this value into the INT_COLL_ORD?
Plz suggest.... -
Hi Everyone
I have a BB Torch 9800.
It was originally registered on the Rogers network, and everything worked fine.
I recently unlocked the phone, and switched to Virgin (ie new SIM card), including a data plan.
Im not able to setup an email account now.
When I go into Setup->Email Accounts->Internet Mail Account, it says "Check for updates'.
After a couple minutes it will timeout saying it can't connect.
In searching the fourms, I came across Host Routing Table settings. My HRT has "* No entries *'. I have "Register Now", which tells me the Registration message was sent, however I havent had a response back.
Im also wondering if this phone is still "registered" with Rogers somehow?
Any help would be greatly appreciated.
Thanksphantasie wrote:
My providor is Virgin Mobile in Ontario, Canada. A quick web search seemed to indivate they support this BB, but IM not positive. So it coul just be thats the issue.
From what I can see in the official Download Portal, Virgin Mobile Canada indeed does support the 9800...you can double check here:
http://us.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html
If a carrier lists an OS package for a specific BB model number, then the carrier supports that model, and everything should be fine.
But, that is step 5...what about the things included in steps 1 through 4? Those, of course, are all steps...requiring the success of a prior step before considering proceeding to the next step. So, for instance, if your voice services aren't yet working from Virgin, then you should not even be thinking yet about getting data to work.
As to your questions:
phantasie wrote:
How do I go about registering the BB onto their network - namel generating the proper Service Book delivery.
Do I request this through my BB?
Normally, I suggest the following steps, in order (again requiring success before proceeding), even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Unfortunately, we already know that your BB fails on step 1 here (register HRT)...which then precludes moving on to step 2. Which leads me back to the prior steps...did steps 1 through 4 all result positively?
phantasie wrote:
How do I go about registering the BB onto their network - namel generating the proper Service Book delivery.
Would the providor do this for me automaticall?
Sometimes yes, sometimes no...when in doubt, the steps above are the way to force it.
phantasie wrote:
How do I go about registering the BB onto their network - namel generating the proper Service Book delivery.
Would I request the providor to do this?
If it does not work with what is above, then the next logical step would be to contact the carrier for formal assistance...after all, it's their network with which you are attempting to get your BB to communicate.
phantasie wrote:
How do I go about registering the BB onto their network - namel generating the proper Service Book delivery.
Do I login into BB to do this (ie I found this link https://bis.na.blackberry.com/html which I tried logging into, but it says my device isnt registered on the network. It told me to setup my Host Routing Tabels to fix that, which I tried, but hasnt worked yet).
There is more than one way to accomplish many of these things. But, until your BB properly registers to the carrier network (HRT), attempting to go any further is pointless.
With all of that, we're back to steps 1 through 4 of what I previously sent...if those are not completed properly, then nothing else will be useful.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
The process time between INNER JOIN and join in WHERE clause
as u know, there are 2 kind of join
SELECT *
FROM tableA
INNER JOIN tableB
ON tableA.ID= tableB.ID
WHERE ....
and
SELECT *
FROM tableA, tableA
WHERE tableA.ID = tableB.ID
AND ....
I find the first one is faster in MS SQL Server.
But i test them in oracle and i find that it is the same. Is it correct?Who knows why SQL Server shows different timings. Perhaps it's just cos it's not good at knowing that the two things are the same.
The only difference in timing as far as Oracle is concerned is the time it takes to parse the syntax of the query, which will be nanoseconds. The execution time of two equivalent queries will not differ based on the factor of the syntax used. -
Time out problem for select query
I am fetching data from BKPF for my report.
I have written following query.But this query always time out.
SELECT
BUKRS
BELNR
GJAHR
BLART
BLDAT
BUDAT
MONAT
XBLNR
BKTXT
WAERS
KURSF
HWAER
FROM BKPF
INTO TABLE I_BKPF
WHERE BUKRS IN S_BUKRS
AND BELNR IN S_BELNR
AND GJAHR IN S_GJAHR
AND BLART IN S_BLART
AND BLDAT IN S_BLDAT
AND BUDAT IN S_BUDAT
AND MONAT IN S_MONAT
AND CPUDT IN S_CPUDT
AND BSTAT = SPACE.
So please suggest me solution.Hi..
1) Try to make Some of the Fields such as BUKRS , GJAHR as PARAMETERS so that ROWS are restrited mostly.
2) Make fields like BLDAT and BUDAT as OBLIGATORY if possible.
3) And in the SELECT query add the PACKAGE SIZE addition.
<b>Reward if Helpful.</b> -
hi friends,
can we use where clause in select statement with inner join.
i am using following code which gives error (The column name "WERKS" has two meanings . .).
SELECT AMATNR ACHARG AERSDA BMENGE B~MEINS
FROM MCHA AS A INNER JOIN CHVW AS B
ON ACHARG = BCHARG
INTO TABLE T_OUTPUT1
WHERE WERKS = PLANT AND CHARG = P_CHARG.
thanks.Yes u can use where clause in select statement with inner join.
SELECT AMATNR ACHARG AERSDA BMENGE B~MEINS
FROM MCHA AS A INNER JOIN CHVW AS B
ON ACHARG = BCHARG
INTO TABLE T_OUTPUT1
WHERE WERKS = PLANT AND CHARG = P_CHARG.
" mention the table name in where condition also like awerks or bwerks.
egards
Rajendra -
Hello
What is the best programming, putting selection in the inner join or in where clause. Below is some sample code that works but wondering if C~statu='X' would have been better in the Where part of the statement in stead as part of the inner join? Maybe don't need the Where in this select statment just code in the inner joins?
SELECT algnum abdatu btanum btapos atbnum btbpos b~werks
blgort bmatnr bmeins bmaktx bvsolm bvltyp b~vlpla
b~nlpla
INTO TABLE gt_ltak
FROM ltak AS a
INNER JOIN ltap AS b ON blgnum = algnum AND
btanum = atanum
INNER JOIN lrf_wkqu AS c ON clgnum = algnum AND
c~bname = sy-uname AND
cqueue = aqueue AND
c~statu = 'X'
INNER JOIN zis_prog_vars AS d ON d~pgm = 'ZRF_TRANS_03_0100' AND
d~fld = l_priority AND
dval1 = atbpri
WHERE a~lgnum = '170' AND
a~tanum = '0000001399'.Hi,
Herewith the corrected version:
SELECT a~lgnum a~bdatu b~tanum b~tapos a~tbnum b~tbpos b~werks
b~lgort b~matnr b~meins b~maktx b~vsolm b~vltyp b~vlpla b~nlpla
INTO TABLE gt_ltak
FROM ltak AS a
INNER JOIN ltap AS b ON b~lgnum = a~lgnum AND
b~tanum = a~tanum
INNER JOIN lrf_wkqu AS c ON c~lgnum = a~lgnum AND
c~queue = a~queue AND
INNER JOIN zis_prog_vars AS d ON d~val1 = a~tbpri
WHERE a~lgnum = '170'
AND a~tanum = '0000001399'
AND c~bname = sy-uname
AND c~statu = 'X'
AND d~pgm = 'ZRF_TRANS_03_0100'
AND d~fld = l_priority.
Kr,
m.
Maybe you are looking for
-
My itunes wont start due to quicktime
itunes wants me to have quicktime 7.5 and i do but it still wont load...what do i do?
-
Hi All In db02 under diagnostics we can see the missing table and indexes. I just want to know the which backend program actually triggers or from which tables is referring to finds out the missing primary indexes in database and particulary shows wh
-
Printing and signing in problems
Hi, I've recently upgraded to Adobe Acrobat XI but since then I have been unable to print off any email pdf attachments and when I try to sign in to adobe export pdf when the pdf document is open, it keeps coming up with 'network error'. When I try a
-
The "save as" window keeps popping up randomingly while browsing, WHY?
Literally every few minutes the pop-up asking to "save as" and it just keeps popping up to save the web page. There is nothing wrong with my ctrl and S button on my key board and I cannot figure out why the save as window keeps popping up. I've done
-
HT3819 The article says you can "simply drag music between computer libraries."
Is there an easy way to transfer music between computer libraries? I am using home sharing and can stream music between one computer to another with no problem. However, when I try to transfer files from one library to another, I can not transfer a