Time-out Connection Problem MBP.

I just received a MacBook Pro. I went to try to connect to my wifi but it wont connect, it keeps saying Connection Timeout. All my other devices are working fine, so i dont know what the problem is. Could anyone help me on how to fix this.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

Similar Messages

HT1338 Why do I get so many "time out" connection problems?

I keep getting "time out" connection problems when I am on computer. I am also experiencing a lot of "spinning wheeling" issues. Are they related?

Hi Garima,
These are the three I use and I get 1 or 2 updates a day on most days....why?
Best regards,
Haye Kesteloo
ServiceSpider, LLC
100 Mill Plain Road
Danbury, CT 06811
Cell: +1 203 522 6727
www.servicespider.com

FTP adapter time out connection

Hello,
I'm trying to send a file with a receiver ftp comunication channel and I obtain the following log in the runtime workbench monitor:
Time Stamp Status Description
2008-05-08 18:41:51 Success Message successfully received by messaging system. Profile: XI URL: http://gestsapxid:50000/MessagingSystem/receive/AFW/XI Credential (User): XIISUSER
2008-05-08 18:41:51 Success Using connection AFW. Trying to put the message into the receive queue.
2008-05-08 18:41:51 Success Message successfully put into the queue.
2008-05-08 18:41:51 Success The message was successfully retrieved from the receive queue.
2008-05-08 18:41:51 Success The message status set to DLNG.
2008-05-08 18:41:51 Success Delivering to channel: FILE_OCHOA_RECEIVER_FTP
2008-05-08 18:41:51 Success File adapter receiver: processing started; QoS required: ExactlyOnce
2008-05-08 18:41:51 Success File adapter receiver channel FILE_OCHOA_RECEIVER_FTP: start processing: party " ", service "ESMAR_OCHOA"
2008-05-08 18:41:51 Success Connect to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar"
2008-05-08 18:41:51 Success Write to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar", file "ochoa20080508_0000000006166839"
2008-05-08 18:41:51 Success Transfer: "TXT" mode, size 412 bytes, character encoding UTF-8
2008-05-08 18:42:12 Error Attempt to process file failed with Connection timed out: connect
2008-05-08 18:42:12 Error Delivery of the message to the application using connection AFW failed, due to: Connection timed out: connect.
2008-05-08 18:42:12 Error Exception caught by adapter framework: Connection timed out: connect
2008-05-08 18:42:12 Success The asynchronous message was successfully scheduled to be delivered at Thu May 08 18:47:12 CEST 2008.
2008-05-08 18:42:12 Success The message status set to WAIT.
I have tested to put a file (with the same FTP parameters) from the promt of the xi server operating system and all works fine. can someone help me to find why the time out connection happens?.
Thank you very much
Alberto.

I have tested in the xi server: run->cmd->ping nnn.nnn.nnn.nnn and I don't reach the ftp server but if I test in the xi server: run->cmd->ftp nnn.nnn.nnn.nnn and introduce the user and password then I log in without problem and I can put the file in the remote directory.
If you see in the log above:
2008-05-08 18:41:51 Success Connect to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar"
2008-05-08 18:41:51 Success Write to FTP server "NNN.NNN.NNN.NNN", directory "/ochoaesmar", file "ochoa20080508_0000000006166839"
2008-05-08 18:41:51 Success Transfer: "TXT" mode, size 412 bytes, character encoding UTF-8
2008-05-08 18:42:12 Error Attempt to process file failed with Connection timed out: connect
the first 3 steps are ok. If the ftp was down or if credentials was wrong other error will be generated.
Thank you very much.
Alberto

Time out connection in the classes12.zip

Hello,
How can I change the time out connection to my database in Java ? I use the JDBC thin driver (classes12.zip) to connect to an 8.1.6 standard Oracle edition on an NT Server.
I tested a network problem connection removing the network cable and then my application waits 20 minutes to raise an exception.
Thanks
Guillaume Facon

You need to set a tcpip timeout at the os level. Oracle jdbc does not support timeouts.

I get error time out connection

i want to upgrade my ipad 1 software (i have 4.2.1 version and i want to upgrade it to a next version, as Itunes store suggests me every time i open it) but after the usual time of 13 minutes upgrade, i get this error: time out connection, contact your provider or control your connection (but it does function elsewhere)
how can i solve it? (excuse my bad english)

For me it worked when I switched the virus protection off while doing the installation. After you run the installation you then switch the virus protection back on.
Hope it works for you too!

Keep getting time out connection error when my macair tries to connect to Internet, but my iPad, phone and PC connect straight away. It happens on and off what could be the problem?

Having trouble connecting to Internet with my MacBook Air. It can be fine for a few hours thins goes off and all I get it the message couldn't connect due to time out error connection. It can't be my broadband because I don't have the same problem with my other devices. Is my mac air breaking down?

looks like this is your network connection settings problem, you'd better only keep one network adaptor online and linked, if you do not understand how to setup windows routing, this is completely not firefox problem. buddy. wish you goodluck.

Genius time out connection

I have installed Itunes and I have tried to switch genius on but every time i try it, it tells me i have a connection time out when I am sending my results to Apple . Does anybody know of what i am doing wrong and how i fix it. Thanks

I've had this same time-out problem since the Genius feature was new. I have a large iTunes library and tried everything in the book. Nothing worked.
The solution that I found in another thread on this exact topic was to bypass the router if you have one and connect your modem directly to you computer.
I had an Airport Extreme (g and n) and now have a Time Capsule. So something with those devices was preventing me from turning on the Genius feature. If this solution works for you and you have an Airport Extreme, let the folks at Apple know via their feedback form.
http://www.apple.com/feedback/timecapsule.html
http://www.apple.com/feedback/airportextreme.html

Soap Reciver Time out connection

hai,
iam doing idoc to soap. iam send the data from sap side this data is going xi server but problem is reciver side is connection time out. iam check the monitoring in sxmb_moni the status is block flag status is successful going to xi server and xiserver sending to receiver system the receiver is connection is time out iam providing the reciver url and user name and pwd.
plz help me any this is very urgent.

After checking in sxmb_adm even when i send the data iam getting the same error.
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: connect: java.net.ConnectException: Connection timed out: connect</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
plz help me out .

Socket mostly times out, connection refused.

Hello,
I am writing my own version of dc-hub in Java. This is my first networking program I make.
The main class has a ServerSocket running on port 411 and it will then make another socket when someone connects. Although at the moment 198 users are connected, it seems that the server mostly gives a time out when you try to connect. It's not a firewall problem, because I get them (localhost) as well. The server also runs on localhost.
This is the code:
ServerSocket serverSock = new ServerSocket(411);while(true) { Socket sock = serverSock.accept(); new ConnectorThread(sock,P,U);}
I really have no clue why I and a lot of other users get time outs...
I'll post the results from the client program (DC++):
[17:39] *** Connection refused by target machine
[17:39] *** Connecting to localhost...
[17:39] *** Connection refused by target machine
[17:39] *** Connecting to localhost...
[17:40] *** Connection refused by target machine
[17:40] *** Connecting to localhost...
[17:40] *** Connected
[17:40] <Hub-Security> Welcome to Tom's personal hubsoftware V1.0
Oh... yeah... I get Connection refused, while my friends are receiving "Connection time out..."
Again: It's not a firewall or router problem... I know that 100% sure...
I hope someone knows how to fix this problem, I've searched the forum without a result for my problem.
Thank you in advance,
Tom

I am running 1.4.2_05 on win2000
Client code
//{{{ Imports
import java.io.*;
import java.net.* ;
* This class provides access to the IOR String via HTTP protocol.
* Server accepts connection from anywhere
public class SockClient // extends Thread
// public static int HTTPIORPort = 2096;
// ServerSocket incommingSocket = null;
// private int SockTimeout = 5000; // 5 seconds
SockClient()
 for (int i = 0 ; i < 40 ; i++)
 try
 new GetThread(i);
 catch (Exception e)
 System.out.println("Caught Exception:");
 e.printStackTrace();
public static void main (String args[])
 new SockClient();
class GetThread extends Thread
 int gen;
 GetThread(int i)
 //setDaemon(true);
 setDaemon(false);
 gen = i;
 start();
 public void run()
 int count = 69;
 try
 Socket socket = new Socket(InetAddress.getByName("localhost"), 2096);
 //System.out.println("timeout="+ socket.getSoTimeout());
 InputStream in = socket.getInputStream();
 OutputStream out = socket.getOutputStream();
 String get = "GET / HTTP/1.1\r\n\r\n";
 out.write(get.getBytes());
 byte[] buf = new byte[1024];
 while (count > 0)
 count = in.read(buf);
 catch (Exception e)
 System.out.println("Caught exception (g="+gen+"):("+count+")"+e.toString());
 //e.printStackTrace();
}Server code:
* Handles HTTP requests
//{{{ Imports
import java.io.*;
import java.net.* ;
import java.util.* ;
* This class provides access to the IOR String via HTTP protocol.
* Server accepts connection from anywhere
public class SockServer // extends Thread
public static int HTTPIORPort = 2096;
ServerSocket incommingSocket = null;
private int sockTimeout = 5000; // 5 seconds
public static void main (String args[])
 try
 new SockServer();
 catch (Exception e)
 System.out.println("main: Exception"+e.toString());
SockServer() throws IOException
 System.out.println("Thread running: HTTPListener");
 Socket incommingRequest = null;
 try
 incommingSocket = new ServerSocket(HTTPIORPort);
 System.out.println("Timeout set to "+incommingSocket.getSoTimeout());
 //incommingSocket.setSoTimeout(sockTimeout); // 5 seconds
 catch (Exception e)
 System.out.println("Unable to start HTTP IOR Server");
 System.exit(1);
 // Ready to Accept connections
 System.out.println("Started HTTPListener listening on "+HTTPIORPort);
 while (true)
 try
 synchronized(incommingSocket)
 incommingRequest = incommingSocket.accept();
 handleRequest(incommingRequest);
 catch (java.net.SocketTimeoutException to)
 catch (Exception e)
 System.out.println("Could not accept HTTP request: "+e.toString());
 break;
 // Close sockets
 try
 incommingRequest.close();
 incommingSocket.close();
 catch (Exception e) { }
 System.out.println("Thread exit: HTTPListener");
void handleRequest(Socket ic)
 System.out.println("Received HTTP IOR Request from: "+
 ic.getInetAddress().getHostAddress()+":"+ic.getPort());
 final Socket httpRequest = ic;
 final String qmVersion = "1.0";
 final BufferedReader inData ;
 final OutputStream outData;
 try
 inData = new BufferedReader(new InputStreamReader(httpRequest.getInputStream()));
 //PrintWriter outData = new PrintWriter(httpRequest.getOutputStream(), true);
 //DataOutputStream outData = new DataOutputStream(httpRequest.getOutputStream());
 outData = httpRequest.getOutputStream();
 catch (Exception e)
 System.out.println("Caught set up streams:" +e.toString());
 return;
 new Thread (null, null, "HTTPAnswerThread", 10 * 1024)
 String page = null;
 // Anonymous contructor
 setDaemon(true);
 start();
 // Anonymous Thread to handle http request
 public void run ()
 String input = "starting";
 try
 // Ditch incoming header
 while (input.length() != 0)
 input = inData.readLine();
 if (input == null)
 System.out.println("input == null");
 break;
 page = "IOR:000000000000002349444C3A515F5175656E74696E2F515F496E7465726E616C506F7274616C3A312E300000000000020000000000000070000102000000000D31302E3136322E36332E3438000011690000001C5374616E64617264496D706C4E616D652F011147170A2C332E013928000000020000000000000008000000004A414300000000010000001C00000000000100010000000105010001000101090000000105010001000000010000002C0000000000000001000000010000001C00000000000100010000000105010001000101090000000105010001";
// outData.print(getHeader(page.length()));
// outData.print(page);
// outData.writeBytes(getHeader(page.length()));
// outData.writeBytes(page);
 //byte[] b = getHeader(page.length()).getBytes("ISO-8859-1");
 byte[] b = stringToBytes(getHeader(page.length()));
 outData.write(b);
 outData.flush();
 //byte[]
 //b = page.getBytes("ISO-8859-1");
 b = stringToBytes(page);
 outData.write(b);
 outData.flush();
 outData.close();
 inData.close();
 httpRequest.close();
 catch (Exception e)
 System.out.println("Unhandled http request:");
 e.printStackTrace();
 byte[] stringToBytes(String s)
 ByteArrayOutputStream os = new ByteArrayOutputStream();
 try
 DataOutputStream cob = new DataOutputStream(os);
 cob.writeBytes(s);
 cob.close();
 catch(Exception e)
 System.out.println("Caught unhandled exception:");
 e.printStackTrace();
 return os.toByteArray();
 String getHeader(int len)
 return
 "HTTP/1.1 200 OK\r\n"+
 "Date: "+ (new Date()).toString() + "\r\n"+
 "Content-Type: text/plain\r\n"+
 "Content-Length: "+ len +"\r\n"+
 "Server: "+ qmVersion + "\r\n"+
 "\r\n";
}

Connection time out, connection time out

i've got a mac mini in my living room wich is hooked up to a modem and one wich is standing in my bedroom.
When i try to connect my bedroom mini by wifi it wil tell me: "connection time out" and i haven't got a clue on how to resolve this.
please help, thnx in advance!
i haven't got an external wifi transmitter if that might be of interest

Are you trying to share the Internet connection from one Mac mini to the other? That is, the mini in the living room that is connected to the Internet modem by Ethernet to share this Internet connection via the mini's AirPort card to the mini in the bedroom ... correct?
If so, approximately how far away from each other are the minis and how many walls, ceilings, floors, etc. are between them?

Time Capsule connection problem

Hello, since three days ago i have been unable to make a backup because I have a connection problem to find the backup disk. The message that I get is: " Check the server name or IP address, and then try again. If you continue to have problems, contact your system administrator". It is weird because when i run the airport utility it shows a green ligth on my time capsule device and also the time capsule hardware has the green ligth. Furthermore I use the device as a router and my network is working fine (Internet, wireless printing HP-envy).
Any ideas on how to fix the issue?

Try just restarting the TC.. this is a Lion plus 7.6 firmware issue.. maybe the new 7.6.1 will help.
If that does not work reset the TC and redo its setup.

Time Out error problem when i run the report for the whole plant

Dear all,
pls find the below coding, when i execute this report for the whole plant , it gives me time out error since it has to process huge database. pls suggest me in which part of my below coding i can improvise or any other better way to fetch the same result.
pls note that
i m using Views for querying.pls also note the comments given in Bold to understand the reason behind the coding.
Views used in are - ZVPOD and ZVPRDCONF.
START-OF-SELECTION.
Data: zstat type jest-stat.
data: stklocaf type mska-lgort.
data: stklocas type mska-lgort.
To collect the status of the production order by joining the ZVPOD and JEST table.
CLEAR it_ZVPRODDET.
SELECT DISTINCT ZVPOD~bukrs ZVPOD~aufnr ZVPOD~objnr
jest~stat ZVPOD~werks ZVPOD~arbpl ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN jest ON ZVPOD~objnr = jest~objnr
INTO CORRESPONDING FIELDS OF wa_ZVPRODDET where
plnbez in FGM and arbpl in wc and werks in plant
and SSAVD in eldate
and J_3AKORD2 in cups and jest~inact ne 'X'.
 APPEND wa_ZVPRODDET TO it_ZVPRODDET.
ENDSELECT.
SORT it_ZVPRODDET BY aufnr stat.
Loop thru Itab to check and delete the records from itab for the specified status.
LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 IF wa_ZVPRODDET-stat = 'I0045' . " TECO - compl
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0009' . " CNF - Confirmed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0012' . " DLV - Delivered
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0046' . " CLSD - Closed
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'I0076' . " DLFL - Del Flag
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ELSEIF wa_ZVPRODDET-stat = 'E0003' . " SCLS - Short Close
 CLEAR tj30t.
 SELECT SINGLE txt04
 FROM tj30t INTO tj30t-txt04
 WHERE stsma = 'PRDHOLD' AND
 estat = 'E0003' AND
 txt04 = 'SCLS' AND
 spras = 'EN'.
 IF sy-subrc = 0.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr.
 ENDIF.
 ENDIF.
* Condition for Prod Order released - REL
 IF wa_ZVPRODDET-stat = 'I0002'.
 mreleased = 'Y'.
 else.
 mreleased = 'N'.
 endif.
 zstat = wa_ZVPRODDET-stat.
 IF mreleased = 'N'.
 DELETE it_ZVPRODDET WHERE aufnr = wa_ZVPRODDET-aufnr
 and stat = zstat.
 ENDIF.
ENDLOOP.
Loop thru the filtered ITAB to get all the production order details for the production order number specified in the where clause( zaufnr ) and populate another internal table.
 LOOP AT it_ZVPRODDET INTO wa_ZVPRODDET.
 zaufnr = wa_zvproddet-aufnr.
 zarbid = wa_zvproddet-arbid.
 at new aufnr.
 SELECT DISTINCT * INTO CORRESPONDING FIELDS OF walnpln
 FROM zvpod where plnbez in FGM and arbpl in wc and SSAVD in
 eldate and werks in plant and J_3AKORD2 in cups and aufnr = zaufnr.
 APPEND walnpln TO itablnpln.
 endselect.
 endat.
 endloop.
 clear walnpln.

Looping thru Internal table and performs all the following calculations and inner loop
and also relevant querying.
Assume that ITABLNPLN holds appox. 8000 records.
LOOP AT itablnpln INTO walnpln.
 contot = 0.
 SELECT distinct * INTO CORRESPONDING FIELDS OF TABLE itablnp
 FROM zvprdconf where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 clear zvprdconf.
 SELECT single isdd
 FROM zvprdconf into zvprdconf-isdd
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 SELECT single isdz
 FROM zvprdconf into zvprdconf-isdz
 where aufnr = walnpln-aufnr and
 j_3asize = walnpln-j_3akordx and stzhl ne '2' and stokz ne 'X'.
 IF sy-subrc EQ 0.
 Assume that ITABLNP holds appox. 30 records.
 loop at itablnp into walnp.
 contot = contot + walnp-J_3ALMNGA.
 move walnp-J_3ASIZE to walnpln-J_3ASIZE.
 move zvprdconf-isdd to walnpln-zdate.
 move zvprdconf-isdz to walnpln-ztime.
 endloop.
 walnpln-output = contot.
 endif.
 walnpln-wip = walnpln-menge - contot.
 if walnpln-werks = '1000'.
 stklocaf = '1050'.
 stklocas = '1060'.
 elseif walnpln-werks = '2000'.
 stklocaf = '2150'.
 stklocas = '2160'.
 endif.
 select single kunnr into walnpln-ship from vbpa where
 vbeln = walnpln-KDAUF and PARVW = 'WE'.
 zship = walnpln-ship.
 move zship to walnpln-ship.
 select single kalab into walnpln-zactqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocaf.
 condense walnpln-kdauf.
 zsales = walnpln-kdauf.
 concatenate zsales 'S' into zso.
 select single kalab into walnpln-zsndqty from mska
 where matnr = walnpln-plnbez
 and j_3asize = walnpln-J_3AKORDX and LGORT = stklocas
 and J_4KSCAT = zso.
 zmatn = walnpln-plnbez.
 zsale = walnpln-KDAUF.
 walnpln-kdauf = zsale.
 walnpln-plnbez = zmatn.
 zcust = walnpln-kunnr.
 walnpln-kunnr = zcust.
 select single bezei into walnpln-season from TVV2T where
 kvgr2 = walnpln-kvgr2 and SPRAS = 'E'.
 select single bezei into walnpln-shipmode from T173T where
 vsart = walnpln-vsart and SPRAS = 'E'.
 STRL = strlen( walnpln-j_3akord2 ).
 if strl = 4.
 move walnpln-j_3akord2 to walnpln-j_3akord3.
 clear walnpln-j_3akord2.
 endif.
 move zremk to walnpln-remk.
 MODIFY itablnpln FROM walnpln.
 contot = 0.
 clear itablnp.
 ENDLOOP.
 PERFORM build_fieldcatalog.
 PERFORM build_layout.
 PERFORM display_alv_report.

Hi raja,
Plese go through the suggessitions.
1.avoide the select ...endselect. write the below select
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X'.
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
2..first of all dont delete a record inside the loop. instead use the Field symobols.
have u obsereved you code in the loop!!!!. wht u r doing..
u r removing the same record which u in the loop..
If u wanto delete the entires with check to stat... then.. why dont u put the STAT field in Wher e condition..? by this you reduce the data base select time..
Now the select query is like the below....
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
FROM ZVPOD
INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 ( STAT <> 'I0045' AND
 STAT <> 'I0045' AND
 STAT <> 'I0009' AND
 STAT <> 'I0012' AND
 STAT <> 'I0046' AND
 STAT <> 'I0076' AND
 STAT <> 'E0003' ).
IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
ENDIF.
3. WHT IS MEANING OF THE SELECT
 CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
 DELETE IT_ZVPRODDET WHERE AUFNR = WA_ZVPRODDET-AUFNR.
ENDIF........ IN WHERE CONDION U R GIven all are constant values right?..
why u need select it inside the loop.. u can write before the SELECT from ZVPOD..
that why first checke this field then go for fur thure selects..
now u r code looks like this....
CLEAR TJ30T.
SELECT SINGLE TXT04
FROM TJ30T INTO TJ30T-TXT04
WHERE STSMA = 'PRDHOLD' AND
 ESTAT = 'E0003' AND
 TXT04 = 'SCLS' AND
 SPRAS = 'EN'.
IF SY-SUBRC = 0.
CLEAR IT_ZVPRODDET.
SELECT DISTINCT
 ZVPOD~BUKRS
 ZVPOD~AUFNR
 ZVPOD~OBJNR
 JEST~STAT
 ZVPOD~WERKS
 ZVPOD~ARBPL
 ZVPOD~J_3AKORD2
 FROM ZVPOD
 INNER JOIN JEST ON ZVPOD~OBJNR = JEST~OBJNR
 INTO CORRESPONDING FIELDS TABLE IT_ZVPRODDET
 WHERE PLNBEZ IN FGM AND
 ARBPL IN WC AND
 WERKS IN PLANT AND
 SSAVD IN ELDATE AND
 J_3AKORD2 IN CUPS AND
 JEST~INACT NE 'X' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0045' AND
 JEST~STAT <> 'I0009' AND
 JEST~STAT <> 'I0012' AND
 JEST~STAT <> 'I0046' AND
 JEST~STAT <> 'I0076' AND
 JEST~STAT <> 'E0003' ).
 IF SY-SUBRC = 0.
 SORT TABLE IT_ZVPRODDET.
 ENDIF.
ENDIF.
there are so many select inside the loop...... please Delete all of them.... write them be for the loop.......using the FOR ALL ENTRIES.....
THEN LOOP THE TABLE USING THE WHERE CONDITIONS.
Plese write u updated code here again..

Error - connection time out: connection

Hello colleagues,
I am implementing a scenario of HTTP-->SOAP sending an xml payload with Wfetch utility.
I get the following error in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection timed out: connect</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Is it connected to the adapter framework definitions? Can someone help?
Thanks,
Oded

Are you sure the mentioned SOAP url can be reached from XI AFW box? Can you take remote control over XI box and try a
telnet 192.117.169.234 80
That should go to blank screen on succesful connection. Is it so?
Also, try to do a complete cpa cache refresh with this URL and authenticate with the XIAFUSER:
http://host:port/CPACache/refresh?mode=full
And finally, have a look in the <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283">troublshooting guide</a>, which might contain something useful (it's really well done).
Cheers,
Alexx

Every time I connect my MBP SR with an external screen, it FREEZES!!

As the title said.
Just ordered this september. Every time I connect it with an external screen, say, a projector or the dell228E at home, it freezes. Either failed to wake from sleep (freezes when the screen was still black), or just freeze where it was.
Today it was the 4th freeze (I have to press and hold the power button to shut it down) in 30 days (I've only had it for 30 days!!).
Any clues? Should I call Apple or what? Hardware issue or software (os) issue?
Thanks!
P.S. I don't have this issue on my own old powerbook 1.67. It was solid rock.

Please search before posting. There is already an extensive exisiting thread in this forum dealing with the same issue
http://discussions.apple.com/thread.jspa?threadID=1058380&tstart=0

Time out connection issues

Help, I am struggling to connect to Itunes, have turned off firewall, antivirus software, uninstalled and reinstalled Itunes (with apple technician), latest version of Itunes installed. Itunes will detect Iphone, Ipad and I pod, but can't sync. Network problem.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Gigabyte Technology Co., Ltd. X58A-UD7
iTunes 10.6.1.7
QuickTime 7.7.2
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0032A7440DB807F8
Current user is an administrator.
The current local date and time is 2012-05-19 19:20:07.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 5700 Series
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.1.7 (x64) is currently running.
iTunesHelper 10.6.1.7 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {9FDFCEC3-1D9B-470B-9373-D62378D3FDF0}
Description: Realtek PCIe GBE Family Controller #2
IP Address: 124.190.90.178
Subnet Mask: 255.255.248.0
Default Gateway: 124.190.88.1
DHCP Enabled: Yes
DHCP Server: 172.18.51.155
Lease Obtained: Sat May 19 18:26:51 2012
Lease Expires: Sun May 20 14:40:01 2012
DNS Servers: 61.9.134.49
61.9.133.193
Adapter Name: {3FCC83C9-27D4-403A-9E58-6B9D5ED32F8E}
Description: Realtek PCIe GBE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 11:00:00 1970
Lease Expires: Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was unsuccessful.
The network connection timed out.
Basic connection to the store failed.
The network connection timed out.
Connection attempt to Gracenote server was successful.
The network connection timed out.
iTunes has never successfully accessed the iTunes Store.

Can you connect to internet with your browser at all?
Try these entries in command prompt (Run as Administrator for Win7/Vista) one at a time.
ipconfig /release
then
ipconfig /renew
restart computer
ipconfig /flushdns
totally shut down computer then restart.
netsh winsock reset all
restart computer
Now test your iTunes again. If that does not work, uninstall your Antivirus program and test again.

Time-out Connection Problem MBP.

Similar Messages

Maybe you are looking for