Time-out problems with RV320 (after upgrade from RV042)

config:
dual wan
WAN1: 4G router (DHCP) - approx 25Mbit/ 8Mbit
WAN2: PPOE (DSL) - 1 Mbit/ 0.2 Mbit
worked with a RV042 before and upgraded to a RV320 now.
all other things are unchanged.
3 problems - 2 solved/ not critical - one still open:
a) not critical: DHCP Status does not include all devices (changing view - but all-time problem)
I would suspect a software bug.... DHCP itself works perfectly/ IPs are assigned (just not shown in status)
b) solved (at least for now): internet connection featured time-outs; after many tries, disabling the SPI in the firewall helped
btw: this only happend for the WAN1 - WAN2 worked (or is that slow that the additonal wait time did not matter ;-)
c) very annoying: exchange connection (from Outlook client to external exchange) still has time-outs (mostly the whole mail client hangs/ ends to be restarted).
As soon as I disable WAN1, it works! But it´s not the LTE WAN itself - switching back to the RV042 does not show the same symptom.
I tried: include IP into local DNS (in general I work with google DNS servers - but changing that does not help either), opening all traffic for teh realevant IPs and disabling the firewall completely. no positive results....
thanks for any hints....

I agree with you on a, probably a bug of some sort.
b is an issue I've seen before, and even on similar bandwidth (25/5) on my rv016. What was able to figure out is that the carrier (ISP) is sending about 4k/sec of ICMP packets to the router, which in turn makes the router think it's under attack so it drops the connection. As you can tell, disabling the SPI helps. For me, putting another router in front of my rv016 (on 2 of 3 wans) was my only 'permanent' solution.
c sounds like there's a protocol binding/static route in the rv042 that you need to add to the rv320. I'd check that first.
Huntsville's Premiere Car and Bike e-magazine: www.huntsvillecarscene.com

Similar Messages

Problem with CM after upgrading from 4.0.19 - 4.1.1

I upgraded my Edge-WAE and Core-WAE from 4.0.19 to 4.1.1 and it was successful
However, after upgrading the CM, I got the message "service temporarily unavailable" when access the web page.
The console showed: "Stopping the service 'cms_cdm' because it is restarting too often."
When I quried the CMS service, I got:
CMS services information :
Service cms_httpd is running
Service cms_cdm is not running
What may be the problem?

I had the same problem and opened a TAC case. It seems that others are reporting the same trouble when using the CM GUI to upgrade the CM. For some reason it doesn't back up the database correctly and it gets corrupted, causing the cms_cdm to crash and then shut down.
I was told to roll back to 4.0.19, de-register all the non-CM devices using a forced de-register, then from the CM CLI, ftp the new 4.1.1 image over, reload, and re-register all the devices.
Luckily my setup was in the lab and not production. There may be a better/another way to do it, but that's the way I got it done.

Problems with Aperture after upgrading from Tiger to Snow Leopard

Help! I recently upgraded my IMac operating system from Tiger to Snow Leopard. Now, I am finding my aperture is not responding the way it used to. I cannot change the border dimensions; I can't print. Any suggestions would be appreciated. I was told by Apple Technical Support that they will not provide support for Aperture 2 and that I would have to upgrade to Aperture 3. Is this correct?

This is called a Kernel panic.
See here for possible solutions:
http://support.apple.com/kb/TS3742
Did you do anything else apart from ungrading OS?
Did you add memory?
Bad or not well seated memory modules are often a cause of kernel panic

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

Problems with 8310 after upgrading to V4.5

Alright I will start with my phone it has locked up and my alarm doesnt work all the time. I have taken the battery out and restarted it, this sometimes works but then it is back to not working again. My husbands phone is much worse it crackles real bad then it turns off. We werent having any problems with these phones until we did the upgrade. Is there someway to fix it?
Thanks
Jenn

Sorry Made mistake.... Disregard first post
TRY THIS
Had some problems after upgrade from tiger to leopard ...Clicked on mail and It wouldnt open.
Had to click on tool bar on top window/message viewer to see my inbox and stuff, then force quit to get out... plus email didnt work
checked all POP settings which were correct( I know cuz I looked at my macbook pro's POP settings and did the same on Imac)
Anyhow...called apple care ...EZ fix
Quit mail if yer on.
Go to Home folder/Library/mail/shiftClick on messageRules.plist And messageRulesplist.backup
Drag and drop messageRules.plist And messageRulesplist.backup to desktop... then highlight preferences folder and drag into that folder
If yer POP settings r right this should work
It did fer me!!!
Good luck
Message was edited by: soboo
Message was edited by: soboo

Problems with Mail after upgrading to 10.5.6

I was using my mail program without problems, until I upgraded to v 10.5.6 - when I tried to 'get new mail' I received the following message:
There may be a problem with the mail server or network. Check the settings for the account or try again.
The server error encountered was: The connection to the server on port 110 timed out.
I contacted my email provider (shaw.ca) and there are no problems with their server. So, I added another email account to check if it was the program, and I'm getting the same response with the new account I added.
Has anyone come across this issue? Any advice? Thank you!!

Sorry Made mistake.... Disregard first post
TRY THIS
Had some problems after upgrade from tiger to leopard ...Clicked on mail and It wouldnt open.
Had to click on tool bar on top window/message viewer to see my inbox and stuff, then force quit to get out... plus email didnt work
checked all POP settings which were correct( I know cuz I looked at my macbook pro's POP settings and did the same on Imac)
Anyhow...called apple care ...EZ fix
Quit mail if yer on.
Go to Home folder/Library/mail/shiftClick on messageRules.plist And messageRulesplist.backup
Drag and drop messageRules.plist And messageRulesplist.backup to desktop... then highlight preferences folder and drag into that folder
If yer POP settings r right this should work
It did fer me!!!
Good luck
Message was edited by: soboo
Message was edited by: soboo

Problems with updates after upgrading to CS4

I am experiencing update problems after upgrading from CS3 to CS4.
After completing the upgrade, I opened CS4 and then clicked on 'Help' and 'Updates'. The download was 280MB of updates, which duly started to install. However, during the install process, I received the 'installation incomplete' pop-up box and could only continue by clicking on the ‘Cancel the current update and continue installing…….’ option. At the end, I shut the machine down.
This morning I have run the CS4 updates again, this time downloading 80MB (I guess the bits that it didn’t do last night). When installing, the same 'installation incomplete' popped up three times.
Any help would be much appreciated.
Many thanks

OS?
Are you seeing which componenets are not successful? If no message in the progress window about what is being installed, there is probably a log.
Have you tried going to the website to download the update installer?

Problems with office after upgrade to ERP 6.0

After upgrade from R3 46c to ERP 6.0 , we installed sap gui 710 with patch 14 and in many frontends a new version of Microsoft Office 2003 SP3.
In many PCs now we have a problem with macros and templates from PA20 transacction with Documents Management.
We try to execute a Wor for a personnel number with infotype 910 and I have the nex messages when Windows open the Word 2003.
"Al abrir este domento, se ejecutará el comando SQL siguiente:
SELECT * FROM C:/DOCUMEN1andreaCONFIG1TempDatasource_tab.SAP
Los datos de la base de datos se colocarán en el documento. ¿Desea continuar?"
If you select "Si", appear another message ~SAP(BA6580C1-BE84.... es un documento principal de combinación. Word no puede encontrar el origen de datos"
When, word document is dsplayed, we only see name of variable and they are not reeplaced by its value.

Sorry, but the note is in Spain (I guess), can you please translate?
We have the same issue on our productive HR system - but not on the development system, what makes it curious.
When we try to start contracts in word we get the same message
"Opening this will run the following SQL command
SELECT * FROM C:\.....Datasource_tab.SAP
How can we avoid this message?
Thanks in advance!

Problem with setMnemonic after upgrading to 1.4.2

Hi,
setMnemonic doesnt seem to work properly for JButtons after upgrading from 1.3.1 to 1.4.1. Hot Key works but underlining doesnt show.
In our app, we have our own controls which are basically derived from Swing controls. In this case JButton.
I have tried using both setMnemonic API (char as well as int) but no luck. Look and feel we use is Windows look and feel (W2K). Font is Dialog. One thing I have noticed is that if I donot set the look and feel in my app. It seems to work fine. (Metalic).
Anybody has any clue on how to fix this issue ?
Thanks in advance
Sohan

Hi,
Here is a code sample for the above problem.
import java.awt.*;
import javax.swing.*;
public class TestFrame {
          public static void main(String[] args) {
                    JButton button = new JButton();
                    JFrame frame = new JFrame();
                    // Add button to the frame
                    //frame.getContentPane().setLayout(new GridBagLayout());
                    //frame.getContentPane().add(button, new GridBagConstraints(3,2,1,1,1.0,1.0,GridBagConstraints.SOUTHEAST,GridBagConstraints.NONE,new Insets (0,0,0,0),0,0));
                    frame.getContentPane().add(button, BorderLayout.NORTH);
                    // Set initial size
                    int frameWidth = 300;
                    int frameHeight = 300;
                    frame.setSize(frameWidth, frameHeight);
                    button.setText ("Button");
                    button.setMnemonic((int)'o' );
                    button.setMargin(new Insets (0,0,0,0));
                    button.setSize (new Dimension (73,21));
                    button.setFont(new Font ("Dialog", Font.PLAIN, 11));
               try {
                    UIManager.setLookAndFeel ("com.sun.java.swing.plaf.windows.WindowsLookAndFeel");
                    SwingUtilities.updateComponentTreeUI(frame);
               catch (Exception e){};
                    // Show the frame
                    frame.pack();
                    frame.setVisible(true);
Sohan

Problems with Mail after upgrading to 10.9.1

I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
Problems I have encountered so far are:
- I don't receive some e-mails on my Gmail account.
- I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
Has anyone encountered the same problems and found a solution?
Thanks in advance!

Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
Strange thing is I receive mail OK, just cant send.

Problems with SAML after Upgrade

Hi Guys,
i'm stuck.
After upgrading from SP6 to SP10 in our NW7.01 System we get following error:
The SAML artifact receiver servlet cannot perform redirection to target
Before the update it was working fine. did anything change from SP6 to 10? can i go 'back'.
I could undeploy tc/sec/saml/service - but is this a good idea?
In which paket was tc/sec/saml/service? Should I undeploy the whole package?
Thanks for help
André

Hi Guys,
i'm stuck.
After upgrading from SP6 to SP10 in our NW7.01 System we get following error:
The SAML artifact receiver servlet cannot perform redirection to target
Before the update it was working fine. did anything change from SP6 to 10? can i go 'back'.
I could undeploy tc/sec/saml/service - but is this a good idea?
In which paket was tc/sec/saml/service? Should I undeploy the whole package?
Thanks for help
André

Problems with charts after upgrading APEX from 3.2 to 4.1

After upgrading apex from 3.2 to 4.1 the combination stacked bar/Stepline charts no longer works. Any help would be appreciated.
Thanks.

Hi "904055",
I believe the reason your chart is no longer working is because you are attempting to generate a chart type that is not covered by our AnyChart Flash charts license i.e. Stepline charts are not one of our support chart types. We only support the chart types exposed via the Application Express UI i.e. the chart types listed in the Create wizards. If you wish to create other AnyChart chart types, you will need to contact AnyChart directly, in order to obtain a separate license and swf file.
If you believe that your chart is only using chart types covered by our license, but are still experiencing issues, then please place a testcase on apex.oracle.com, post some login credentials, and I'd be happy to take a look.
Regards,
Hilary

[SOLVED] Problem with murmur after upgrading to 1.2.3-4

I've been running Murmur on my server for a long time without problems. The last version I had running was 1.2.3-3. After upgrading to 1.2.3-4, the already-running murmurd process crashed after a while (some hours after the upgrade, after constant use) and I'm unable to restart it. The message I get is:
:: Starting murmur [BUSY]
<W>2012-01-07 22:06:11.133 Initializing settings from /etc/murmur.ini (basepath /etc)
<W>2012-01-07 22:06:11.134 OpenSSL: OpenSSL 1.0.0f 4 Jan 2012
<W>2012-01-07 22:06:11.134 SSL: Adding recommended CA StartCom Certification Authority
<W>2012-01-07 22:06:11.134 SSL: Adding recommended CA AAA Certificate Services
<W>2012-01-07 22:06:11.135 SSL: Adding recommended CA UTN-USERFirst-Client Authentication and Email
<C>2012-01-07 22:06:11.135 Successfully switched to uid 1007
<F>2012-01-07 22:06:11.230 ServerDB: Failed initialization: unable to open database file Error opening database
[DONE]
and in murmur.log nothing gets written. Downgrading to 1.2.3-3 works, but I thought I'd look for the cause of the problem.
After poking around a bit, I noticed that my murmur database (/var/lib/murmur/murmur.sqlite) belongs to a nonexistent user with a UID of 86 and a GID of 86, as well as the whole /var/log/murmur/ directory. I also noticed that a new murmur user and group with UID and GID of 1007 and 1000 exists on the system now. It seems that running:
sudo chown -R murmur:murmur /var/lib/murmur/ /var/log/murmur/
fixes the problem. Perhaps the update deleted my pre-existing murmur user and group and recreated them?
Edit: Guess I should mark this as [SOLVED].
Edit edit:
Also turns out the whole /var/lib/murmur/ directory has to belong to murmur, not just the sqlite file.
Last edited by n17ikh (2012-01-08 03:22:39)

I had the same problem and fixed it like you.

Is anyone having problems with keynote after upgrading to Lion?

After upgrading my system to Lion, my keynote presentations are becoming a nightmare. They crash all the time, and are becoming significantly slower, not just due to the autosave but after making just a few movements the beach ball appears and takes forever for me to be able to edit the document again. When I try to put into presentation mode the computer stops, sometimes I even lost the images inside the saved prasentation, and when I tried to recover from the auto saved versions, they were corrupted also. I talked to the apple support here in Brazil and after running all kinds procedures to check and fix the disk and hardware even in the safe mode, it still remained with the same problem. Another suggestion was to reinstall the keynote, and I even bought a new version from the app store even though the old one was updated. Again, nothing changed. Does anyone have the same problem or knows what to do?

Hi Thomas - listen, I want to tell you that we aren't necessarily all in the same boat...what I mean is that this problem almost ruined my business and I spent a long time reading the dozen or so threads in this board, and tried solutions people suggested in each one. I had two separate problems...the first was like yours, and it was indeed solved by the time machine save setting mentioned above. The other was that I couldn't get an object selected with a click of the mouse every tenth time or so...I had to click onto a different slide and then come back to mine. I started turning off every single piece of hardware and software one by one, in search of a conflict. It turns out that my Apple Magic Mouse was the problem. I switched it to a plain MS wireless mouse and problem solved. *****, but it let's me continue. My point is that too many people are using Keynote just fine for any of us to throw in the towel and say it's universally and irreversibly broken. There are different bugs in play, but you have to go on the assumption that there's a way out if you can spot what's not quite right. Sorry I don't have your specific solution, but this mindset is what saved me from jumping ship to PPT.

Problems with plugins after upgrading to win8

Hi
I made the upgrade to Windows 8 and now several PS plugins causes Photoshop CS6 to "Stop Working And need to close". I have uninstalled
and reinstalled plugins and still the same problem. As this happens with different plugins from different vendors I am led to believe this is
not a 3rd party problem, but rather a problem with PS in win8. Happens with plugins from Niksoft and RedGiant. Needless to say I have
all the latest software and updates - legally purchased.
I haven't done much research into this, posting here is my first step after googeling didn't help. Is this a common problem? Does anyone
know a fix to this? It's of such importance that I am already considering reinstalling win7.

As an update on this,
After I installed the latest Windows Update system fix packages that were released today most of the plugins now work. I am not 100% sure I can credit MS with fixing this, as I fiddled with alot with my graphics card trying to make this work at the same time as I updated. I will have to do some more testing on this to able to say exactly what was the problem.
I'm installing win7+ps on a virtual machine so I can use that when absolutely needed for the plugins still not working - guess I can live with that until certain 3rd party vendors sort things out.
Allright Noel, I get your point - but you have to be downright difficult to be reading my initial question as if I was seeking support on 3rd party software as such.

Time-out problems with RV320 (after upgrade from RV042)

Similar Messages

Maybe you are looking for