Time out Through MAXTRANTIME in tuxedo 8.1
Request all to share inputs on MAXTRANTIME parameter introduced in Tuxedo 8.1. I am using Tuxedo 8.1 and tried to use MAXTRANTIME but effect/behavior is not clear to me from Tuxedo 8.1 documentation.
We use global transaction ( time out used in tpbegin is 0 - i.e. no time outs) and MAXTRANTIME is not taking in to effect and Transaction are not getting time out. I can not verify that as i am not clear of effect/behavior.
Thanks,
Ajeet
Ajeet,
There are currently no known issues with the MAXTRANTIME feature.
Verify that you have executed tmloadcf after updating the UBBCONFIG file and
run tmunloadcf to make sure that the TUXCONFIG file updated is the one being
used by your application.
The tmadmin subcommand "verbose" followed by "printtrans" can be used to
show the time remaining until timeout for all currently active transactions.
Remember that transaction timeout can occur up to SCANUNIT seconds after the
specified time due to the timing of the BBL scan.
Timeout will be detected when the next ATMI call is made on behalf of the
transaction, but timeout does not send a signal or other notification to
processes involved in the transaction. A server which is executing
long-running database operations or other long-running application code will
continue to operate on a transaction until an ATMI call is made which
detects the transaction timeout.
If none of the above suggestions solves the problem, then you'll need to
open a case with customer support.
Ed
<AJEET TEWARI> wrote in message news:[email protected]..
Request all to share inputs on MAXTRANTIME parameter introduced in Tuxedo
8.1. I am using Tuxedo 8.1 and tried to use MAXTRANTIME but effect/behavior
is not clear to me from Tuxedo 8.1 documentation.
We use global transaction ( time out used in tpbegin is 0 - i.e. no time
outs) and MAXTRANTIME is not taking in to effect and Transaction are not
getting time out. I can not verify that as i am not clear of
effect/behavior.
Thanks,
Ajeet
Similar Messages
-
Token time-out through a federation chain.
I have a RP connected to ADFS and then the ADFS uses federation to go through a chain of R-STS to the IDP.
Just wondering what the rules around token time-out are?
If the RP token times out it will go back to ADFS for a new token. If the ADFS token time-out is less than the RP token time-out, then does ADFS pass this to the preceding one in the chain and that checks its token time-out and (if timed out) pass back upstream
potentially all the way to the IDP?
If one of the upstream R-STS had not timed out, would it simply re-mint the token at that level? I assume that it would need to store the token information that it received from its upstream partner in order to do this? perhaps in a cookie? Problem is I
can't see any sign of these?
WS-Fed is used all the way up.
I can't find any articles that define the correct behaviour hence the question.WS-Fed CP chains became unpopular when Office365 did not support them :-). Yes, and there is a difference between SAML1 and SAML 2 Token handling. If all intermediaries can be controlled, then it is probably possible to do it at the Issuers.
However, my conservative/defensive conclusion is that it is best organized at the RP (or in traditional SAML speak: SP). Often with the Sliding expiration.
Sliding expiration is documented in his first WIF book by Vittorio. And later enhanced in the second edition of the Patterns and Practices book. The last book also explains how to do it in SharePoint! It is possible and documented, contrary to common believe.
Of course I totally agree with Dominick that there should be some upper limit to validity. Especially in case of compromised tokens. You don't want them to be valid really "forever".
Paul Lemmers -
Response Time out through IISProxy.dll
I just found that the end of my message was missing . So, I posting the remaining
over here.
Because , I was flusing the data after every 2 minutes , it worked fine ..
This one worked with WebLogic 5.1 when accessing the Weblogic server directly
. Like
http://IP:7001/x/applet.jsp (This JSP downloads the Applet under JRE1.3) .
From this Applet I was calling the above code (delay.jsp) using the HttpMessage
Class as given below.
However , when proxied by path with the WebServer IIS4.0 it didn't work.
IS IISProxy.dll not capable of doing it ?
Iam copying the code fragments for the Applet Iam using . Is it a problem with
the code?
I heard that the URLConnection never times out . How is that it is not able to
read the Response?
<CODE >
<HttpMessage>
public class HttpMessage {
URL servlet = null;
Hashtable headers = null;
public HttpMessage(URL servlet) {
this.servlet = servlet;
public InputStream sendGetMessage(Properties args) throws IOException {
String argString = ""; // default
if (args != null) {
argString = "?" + toEncodedString(args);
URL url = new URL(servlet.toExternalForm() + argString);
// Turn off caching
URLConnection con = url.openConnection();
con.setUseCaches(false);
// Send headers
sendHeaders(con);
return con.getInputStream();
private void sendHeaders(URLConnection con) {
if (headers != null) {
Enumeration enum = headers.keys();
while (enum.hasMoreElements()) {
String name = (String) enum.nextElement();
String value = (String) headers.get(name);
con.setRequestProperty(name, value);
</HttpMssage>
<Code used to Read the Response.>
URL url = new URL(getDocumentBase(),"/ccls/test/delay.jsp");
HttpMessage msg = new HttpMessage(url);
InputStream in = msg.sendGetMessage(null);
char[] buff = new char[2048];
int bytesRead;
int ch;
StringBuffer sbtextbox = new StringBuffer("");
DataInputStream data = new DataInputStream(
new BufferedInputStream(in));
String line;
while ((line = data.readLine()) != null) {
sbtextbox.append(line+"\r\n");
</Code used to Read the Response.>
</CODE>
Can anybody suggest what should be the possible reasons and any workaround for
it?Increase "HungServerRecoverSecs"(default 300 seconds) in your iisproxy.ini.
Jong
"TejoKiran" <[email protected]> wrote:
>
Hi ,
Iam using an Applet (under JRE 1.3.0).
Iam trying to send a Http Request using URL Connection.
It is working fine . However, if the response time of the server is more
than
3 minutes ,
the Response is not coming back to the the Applet and it is in a loop
trying to
read from the Server.
I have observed that the request is sent to the server and it is processed
successfully.
Then , I tried to call this sample JSP from the Applet.
<CODE : delay.jsp>
<%@ page language="java" import="java.util.*"%>
<%
System.out.println("<START>");
out.println((new Date()).toString());
System.out.println((new Date()).toString());
long cTime;
cTime = System.currentTimeMillis();
long dTime = cTime;
while(true) {
long dif = System.currentTimeMillis() - cTime;
if(dif > (15*60*1000))
break;
if((System.currentTimeMillis() - dTime) > (2*60*1000)) {
out.println("2 Minutes");
out.flush();
System.out.println("2 Minutes");
dTime = System.currentTimeMillis();
System.out.println((new Date()).toString());
out.println((new Date()).toString());
System.out.println("<END>");
%>
</CODE>
Because , I was flushing the data after every 2 minutes , it worked fine
This one worked with WebLogic 5.1 when accessing the Weblogic server
directly
. Like
http://IP:7001/ccls/test/applet.jsp (This JSP downloads the Applet under
JRE1.3) -
whenever i tried to update my iphone through itunes it gives the server connection time out error and i am unable to update my software throught the iphone
Hello ujl,
The articles linked below provides steps that can help get your iPhone restored.
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Cheers,
Allen -
I have done all the above. I am in Germany using an iPad 2, trying to call an iPad 2 in the UK. My IPad goes through the call and then times out. I have been on the phone to the receiver at the time so know they had their iPad on.
What do you mean that you can't "call" an iPad in the UK?? That doesn't particularly make sense. You can email to an iPad or text them, but the iPad is not a phone, so how do you expect to "call" them??
Hope this helps -
When I try to synch my iPhone 4 with iTunes - both at the latest code levels - the synch goes normally until the last stage where I get the message Finishing sync. It nevers completes. Eventually it times out and states that the iPhone is not responding. On the phone the sync icon has gone away so the iPhone thinks that it is done.
More information. During the synch process this last time it moved through the first 5 steps fine. At some point during the "Waiting for items to copy" the iPhone stopped showing the sync icon.
-
3253 error code, times out Downloads through itunes on mac
I have been trying to download the iphone 4 upgrade and some other larger files like movies through itunes and it is soooo slow and always times out or show an error 3253 message. I have searched for a remedy but only find things in regards to windows and i'm on my mac. I'm disconnected my modem/router and reconnected, rebooted, etc. but still having problems. Help! My iphone downloads movies faster than itunes does. The songs are not a problem.
Changing my DNS settings worked for me (3253 errors on my MBP). I followed the instructions here:
http://appletoolbox.com/2010/09/itunes-10-the-network-connection-was-reset-fix/
Hope that helps! -
I can see my Canon MP600 usb connected to Airport Express through Bonjour on my Windows XP. But, when installed by Bonjour, the printor time-out and can't print anything. Any idea what to do?
Thanks for the quick reply.
So am I correct in saying trying to utilise the Airport Express to access the printer over the network was a wasted effort due to the latest iOS? I had read up on the express before purchase and believed that was one of it's main purposes.
Thanks again for the help. -
All Apple updates time out. But through a VPN, it's fine!
Something might be wrong with Verizon Fios in the NYC area. Since last night, any download from Apple times out. Also http://www.speakeasy.net/speedtest/ reports a speed of less than 1Mbps. Connected to a VPN and everything worked normally. Verizon support guy said nothing was wrong, but someone please tell me why this is happening?
thanksI've experienced the same problem here in Massachusetts. At first I thought it was an Apple problem, but then I tried downloading iOS 8 via cellular and found it to be orders of magnitude faster than my FIOS 75/75 network despite speedtest showing full speed capability!
I then tried downloading from Apple through my company's VPN on my home computer (same computer, same physical network as my FIOS setup) and was able to download iOS in about 8 minutes (about 7mb/sec) versus 11-12 kb/sec without the VPN.
This is outrageous for a supposedly high-speed network. Does anyone from Verizon monitor this forum? I'm reluctant to get involved with a level 1 support call on this, as it's clearly not a problem at my end. -
Facing Time out after 270 sec through webservice.
Hello all,
I am invoking PDF generator for Postscript through webservice along with a cofiguration xml which has timeout set to 10000. But the service doesnot recognise this value & always gets timed out at 270 sec which is its default value.
I tried converting a PS file to PDF using the GUI by setting the timeout parameter to a higher value than 270 but it still got time out at the default value.
Please help me solve this prob...
Thanks in advance.
-Vineesh.Which version of Java?
Which web app server/db and version?
Does it work for small (<10Meg files)?
I've never needed a timeout over 4 minutes even for 500Meg+ PS files, although I'm interacting through the EJB interface, not the webservice.
I believe there may be some way to increase the timeout further, although I think it involves editing configuration files within the ear/war/jar structure of the deployed libraries; the 270 second value does appear in native2pdfconfig.xml in the pdfg-all.ear on the professional version of PDFG, although I don't have time to test whether this value actually has an effect on the maximum timeout. It may appear elsewhere too. And I'm not sure if it will be in the same location in the postscript only version. -
I have moved to the country where my internet speed is slow. I am running some auto updates that keep timing out half way through. Can the time out be shut off to complete the update?
bondod wrote:
Can the time out be shut off to complete the update?
I'm not sure about that. But what you could try is to set the Update Preference to "Manual" and try updating at a time when the Network may not be as busy, like late at night or early in the morning.
Just an idea. -
Session Time Out capturing for legacy application running in portal
Hi Forums,
I am using portal URL iView to connect to legacy application. How to capture the session time of of that legacy application and show it in the portal. In portal I have already handled session time out which shows a javascript popup message. I want to call the same piece of code once session time out happens in the legacy application which is been accessed by portal through URL iview.
Many Thanks and Best Regards
SudhirHi Sudhir,
The handling of the session timeout should be done by the application itself not the portal. From the portal you have no way of working out what the application is doing. My suggestion to you is that you need to modify the application to handle the scenario you describe not the portal.
BRgds,
Simon -
Session time out when working in application level
Hi
We are upgraded our PROD environment from 11.5.10.2 to R12.1.3
When end user working at application level then it is throughing the session time out error, end user is not idle state he active and working on application level
I have checked the profile ICX:Session Timeout it is 30
Thanks
ShaikHi;
Please see:
ICX:SESSION TIME OUT
Re: Inccreasing the timeout parameter for the Oracle R12 session
Also see:
How AutoConfig sets ICX: Session Timeout [ID 307149.1]
How To Manage Timeout at Responsibility Level [ID 412224.1]
Regard
Helios -
Session time-out and password security
Hi,
I have a webservice utility, deployed on several platforms (as an EAR on weblogic and webspere, as a WAR on tomcat), they all exhibit the same feature: on first connection, a username/password box pops up, but after the session times out (after 20 minutes or so of inactivity) and the it receives a new page request, instead of re-asking for the username/password, the app just jumps back to its own start page, and then continues without asking.
How can I make it to pop-up the username/password box again?
The security is implemented through the web.xml file:
<security-constraint>
<web-resource-collection>
<web-resource-name>Success</web-resource-name>
<url-pattern>/Logparser</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<role-name>webuser</role-name>
</auth-constraint>
</security-constraint>
<login-config>
<auth-method>BASIC</auth-method>
<realm-name>default</realm-name>
</login-config>
<security-role>
<role-name>webuser</role-name>
</security-role>I found that this in itself was not good enough security as you would be able to go directly to one of the sub-pages (if you know the url), and to prevent that I pass (and check) the session-id with each page request.
(all java servlets).
Obviously something is missing, but I don't know what
thanks
MichaelHi Michael,
Your web application is currently configured to use BASIC authentication.
Instead if you use FORM-based authentication, then any new request (after your web application session times out) will be redirected to the login page. The Servlet specification has more information about FORM-based login.
If you have a Sun ONE Web Server 6.1 or a Sun Java System Web Server 7.0 installation you can find a sample that uses form-login in the following directory
6.1: <install-directory>/plugins/java/samples/webapps/security/form-auth
7.0: <install-directory>/samples/java/webapps/security/form-auth -
Request time out when creating content database
Hello,
my problem is, that i cannot create a SharePoint content database via the central administration.
My Setup is the following:
SharePoint Server 2013 Enterprise Farm
1x Applikation Server/WFE (Windows Server 2012 SP 1)
1x Database Server MSSQL Server 2012 (Windows Server 2012 SP 1)
1x TFS 2013 (Windows Server 2012 SP 1)
all of them are hosted in the same Hyper-V Environment. It is not the fasted Hyper-V Environment existing on planet earth.
The weirdest part of the problem is, i am able to create a content database via powershell.
I am running in some kind of time out issue related to the IIS and CA of that Applikation Server.
Here is the ULS Log from the failling content database creation via CA
12.18.2014 10:26:09.47 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (PostAuthenticateRequestHandler). Execution Time=8,5997
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:09.66 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
General g3qj
High [Forced due to logging gap, cached @ 12/18/2014 10:26:09.50, Original Level: Verbose] url is in site
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:09.66 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Asp Runtime aj1kp
High [Forced due to logging gap, Original Level: Verbose] SPRequestModule.PreSendRequestHeaders
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:09.73 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, cached @ 12/18/2014 10:26:09.70, Original Level: Verbose] SQL connection time: 14.765 for Data Source=SQLSERVER\DATABASE;Initial Catalog=master;Integrated Security=True;Pooling=False
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:09.73 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Topology 8xqz
High [Forced due to logging gap, Original Level: Medium] Updating SPPersistedObject {0}. Version: {1} Ensure: {2}, HashCode: {3}, Id: {4}, Stack: {5}
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:09.77 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Upgrade aj2jl
High 12/18/2014 10:26:09.77 w3wp (0x2304) 0x1B40 SharePoint Foundation Upgrade ServerSequence aj2jl DEBUG Search ServerSequence returns TargetBuildVersion '15.0.4675.1000' 4deed69c-2f53-a086-14bb-cbf40b020025
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:09.77 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Upgrade aj2jk
High 12/18/2014 10:26:09.77 w3wp (0x2304) 0x1B40 SharePoint Foundation Upgrade ServerSequence aj2jk DEBUG Setting Search ServerSequence version (guid '53d65723-a256-48d7-a477-1d3466089eef') to BuildVersion '15.0.4675.1000'
4deed69c-2f53-a086-14bb-cbf40b020025 4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:09.77 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Upgrade aj2jl
High 12/18/2014 10:26:09.77 w3wp (0x2304) 0x1B40 SharePoint Foundation Upgrade ServerSequence aj2jl DEBUG Search ServerSequence returns TargetBuildVersion '15.0.4675.1000' 4deed69c-2f53-a086-14bb-cbf40b020025
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:09.83 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database 8acb
High [Forced due to logging gap, cached @ 12/18/2014 10:26:09.81, Original Level: VerboseEx] Reverting to process identity
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:09.83 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, Original Level: Verbose] SQL connection time: 0.2565 for Data Source=SQLSERVER\DATABASE;Initial Catalog=SharePoint_2013_Prod_Config;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=400
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.16 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, cached @ 12/18/2014 10:26:09.86, Original Level: Verbose] SQL connection time: 0.1719 for Data Source=SQLSERVER\DATABASE;Initial Catalog=SharePoint_2013_Prod_Config;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=400
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.16 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database 8acb
High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.19 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Topology 84y4
High Granting VIEW SERVER STATE permission for S-1-5-21-3747686279-3738247048-1854932723-1131.
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.23 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Topology 84y5
High VIEW SERVER STATE permission updated successfully.
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.23 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Topology 84y4
High Granting CONTROL SERVER permission for S-1-5-21-3747686279-3738247048-1854932723-1131.
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.25 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Topology 84y5
High CONTROL SERVER permission updated successfully.
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.33 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database 8acb
High [Forced due to logging gap, cached @ 12/18/2014 10:26:12.30, Original Level: VerboseEx] Reverting to process identity
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.33 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, Original Level: Verbose] SQL connection time: 16.4685 for Data Source=SQLSERVER\DATABASE;Initial Catalog=master;Integrated Security=True;Enlist=False;Pooling=False;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=400 4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.39 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database 8acb
High [Forced due to logging gap, cached @ 12/18/2014 10:26:12.38, Original Level: VerboseEx] Reverting to process identity
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.39 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, Original Level: Verbose] SQL connection time: 11.6743 for Data Source=SQLSERVER\DATABASE;Initial Catalog=master;Integrated Security=True;Enlist=False;Pooling=False;Min Pool Size=0;Max
Pool Size=100;Connect Timeout=400 4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:12.42 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database 7t6o
High The WSS_Content_uitest database does not exist. It will now be created.
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:15.11 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, cached @ 12/18/2014 10:26:12.44, Original Level: Verbose] SQL connection time: 9.9785 for Data Source=SQLSERVER\DATABASE;Initial Catalog=master;Integrated Security=True;Enlist=False;Pooling=False;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=400
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:15.11 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database ab20s
High [Forced due to logging gap, Original Level: Medium] Setting the {0} option to {1} on the database {2}.
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:26:15.14 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Upgrade ajy0d
High 12/18/2014 10:26:15.14 w3wp (0x2304) 0x1B40 SharePoint Foundation Upgrade SPUtility ajy0d DEBUG File C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\sql\store.sql, Time out =
0 sec 4deed69c-2f53-a086-14bb-cbf40b020025
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.46 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database ahjqp
High [Forced due to logging gap, cached @ 12/18/2014 10:26:15.16, Original Level: Verbose] SQL connection time: 11.4389 for Data Source=SQLSERVER\DATABASE;Initial Catalog=WSS_Content_uitest;Integrated Security=True;Enlist=False;Pooling=False;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=400
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.46 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database fa45
High System.Threading.ThreadAbortException: Thread was being aborted. at SNIReadSyncOverAsync(SNI_ConnWrapper* , SNI_Packet** , Int32 ) at SNINativeMethodWrapper.SNIReadSyncOverAsync(SafeHandle
pConn, IntPtr& packet, Int32 timeout) at System.Data.SqlClient.TdsParserStateObject.ReadSniSyncOverAsync() at System.Data.SqlClient.TdsParserStateObject.TryReadNetworkPacket() at System.Data.SqlClient.TdsParserStateObject.TryPrepareBuffer()
at System.Data.SqlClient.TdsParserStateObject.TryReadByte(Byte& value) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler,
TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1
completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.SharePoint.Utilities.SqlSession.ExecuteScript(TextReader textReader, Int32
commandTimeout) 4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.47 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database fa46
High at Microsoft.SharePoint.Utilities.SqlSession.ExecuteScript(String path, Int32 commandTimeout) at Microsoft.SharePoint.Upgrade.SPUtility.ExecuteSqlFile(SqlSession sqlSession, ISqlSession isqlSession,
SqlFile sqlFileId, Int32 timeOut) at Microsoft.SharePoint.Administration.SPDatabase.Provision(SPDatabase database, SqlConnectionStringBuilder connectionString, SqlFile sqlFileId, Dictionary`2 options) at Microsoft.SharePoint.Administration.SPContentDatabase.Provision()
at Microsoft.SharePoint.Administration.SPContentDatabaseCollection.Add(SPContentDatabase database, Boolean provision, Guid webApplicationLockId, Int32 addFlags) at Microsoft.SharePoint.Administration.SPContentDatabaseCollection.Add(Guid
newDatabaseId, String strDatabaseServer, String strDatabaseName, String strDatabaseUsername, String strDatabasePassword, Int32 warningSiteCount, Int32 maximumSiteCount, Int32 status, Boolean provision, Guid lockId, Int32 addFlags) at Microsoft.SharePoint.ApplicationPages.NewContentDBPage.BtnSubmit_Click(Object
sender, EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at
System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception
error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at
System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer,
IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr
pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr
rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags)
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.47 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database tzku
High ConnectionString: 'Data Source=SQLSERVER\DATABASE;Initial Catalog=WSS_Content_uitest;Integrated Security=True;Enlist=False;Pooling=False;Min Pool Size=0;Max Pool Size=100;Connect Timeout=400' Partition:
NULL ConnectionState: Closed ConnectionTimeout: 400
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.50 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database tzkv
High SqlCommand: '--FixO15:3174405 create role SPReadOnly This line should not be changed or removed, otherwise upgrade would fail. IF NOT EXISTS (SELECT * FROM sys.database_principals WHERE name = N'SPReadOnly'
AND type = 'R') CREATE ROLE [SPReadOnly] DECLARE @objname sysname, @objtype NVARCHAR(max), @datatype NVARCHAR(max), @query NVARCHAR(max) -- Grant SELECT on all SharePoint stored procedures and functions DECLARE c CURSOR LOCAL FAST_FORWARD
FOR SELECT ROUTINE_NAME, ROUTINE_TYPE, DATA_TYPE FROM INFORMATION_SCHEMA.ROUTINES WHERE ROUTINE_SCHEMA = 'DBO' OPEN c WHILE 1 = 1 BEGIN FETCH NEXT FROM c INTO
@objname, @objtype, @datatype IF @@FETCH_STATUS = -1 BREAK IF @@FETCH_STATUS = 0 BEGIN -- Inline table-valued functions
IF (@objtype = 'FUNCTION' AND @datatype = 'TABLE') SET @query = 'GRANT SELECT ON [dbo].' + quotename(@objname) + ' TO [SPReadOnly]' EXEC sp_executesql
@query END END CLOSE c DEALLOCATE c -- Grant SELECT on all SharePoint tables DECLARE c CURSOR LOCAL FAST_FORWARD FOR SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_SCHEMA = 'DBO' OPEN c WHILE 1 = 1 BEGIN FETCH NEXT FROM c INTO @objname IF @@FETCH_STATUS = -1 BREAK IF @@FETCH_STATUS
= 0 BEGIN SET @query = 'GRANT SELECT ON [dbo].' + quotename(@objname) + ' TO [SPReadOnly]' EXEC sp_executesql @query END END CLOSE
c DEALLOCATE c -- Grant EXECUTE on User-defined type where schema is dbo DECLARE c CURSOR LOCAL FAST_FORWARD FOR SELECT NAME FROM SYS.TYPES WHERE IS_USER_DEFINED = 1
AND SCHEMA_ID = schema_id(N'dbo') OPEN c WHILE 1 = 1 BEGIN FETCH NEXT FROM c INTO @objname IF @@FETCH_STATUS = -1 BREAK IF @@FETCH_STATUS
= 0 BEGIN SET @query = 'GRANT EXECUTE ON TYPE::[dbo].' + quotename(@objname) + ' TO [SPReadOnly]' EXEC sp_executesql @query END END CLOSE
c DEALLOCATE c ' CommandType: Text CommandTimeout: 0
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.50 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database aek90
High SecurityOnOperationCheck = False
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.50 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (Database.Provision (WSS_Content_uitest on SQLSErver\database)). Execution Time=115148.4664
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.50 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Topology 8dyx
High Deleting the SPPersistedObject, SPContentDatabase Name=WSS_Content_uitest.
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.56 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Topology bw4w
High [Forced due to logging gap, cached @ 12/18/2014 10:28:07.53, Original Level: Medium] {0}
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.56 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Database 8acb
High [Forced due to logging gap, Original Level: VerboseEx] Reverting to process identity
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.60 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (Creating Content Database (WSS_Content_uitest on SQLServer\Database)). Execution Time=115311.5636
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.64 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Runtime tkau
Unexpected System.Web.HttpException: Request timed out.
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.64 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
General ajlz0
High Getting Error Message for Exception System.Web.HttpException (0x80004005): Request timed out.
4deed69c-2f53-a086-14bb-cbf40b020025
12.18.2014 10:28:07.69 w3wp.exe (0x2304)
0x1B40 SharePoint Foundation
Micro Trace uls4
High Micro Trace Tags: 0 b4ly,301 aj2jl,3 aj2jk,0 aj2jl,2423 84y4,35 84y5,4 84y4,11 84y5,181 7t6o,2714 ajy0d,112321 fa45,10 fa46,3 tzku,23 tzkv,0 aek90,0 b4ly,6 8dyx,91 b4ly,38 tkau,13 ajlz0
4deed69c-2f53-a086-14bb-cbf40b020025
The working content database creation from powershell looks like this
12.18.2014 09:45:37.52 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Upgrade aj2jl
High 12/18/2014 09:45:37.52 powershell (0x2058) 0x1E28 SharePoint Foundation Upgrade ServerSequence aj2jl DEBUG Search ServerSequence returns TargetBuildVersion '15.0.4675.1000' 43dae8a1-02e3-43f5-8a06-0417221e6385
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:45:37.52 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Upgrade aj2jk
High 12/18/2014 09:45:37.52 powershell (0x2058) 0x1E28 SharePoint Foundation Upgrade ServerSequence aj2jk DEBUG Setting Search ServerSequence version (guid '53d65723-a256-48d7-a477-1d3466089eef') to BuildVersion '15.0.4675.1000'
43dae8a1-02e3-43f5-8a06-0417221e6385 43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:45:37.52 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Upgrade aj2jl
High 12/18/2014 09:45:37.52 powershell (0x2058) 0x1E28 SharePoint Foundation Upgrade ServerSequence aj2jl DEBUG Search ServerSequence returns TargetBuildVersion '15.0.4675.1000' 43dae8a1-02e3-43f5-8a06-0417221e6385
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:45:39.98 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Topology 84y4
High Granting VIEW SERVER STATE permission for S-1-5-21-3747686279-3738247048-1854932723-1131.
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:45:40.02 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Topology 84y5
High VIEW SERVER STATE permission updated successfully.
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:45:40.02 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Topology 84y4
High Granting CONTROL SERVER permission for S-1-5-21-3747686279-3738247048-1854932723-1131.
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:45:40.03 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Topology 84y5
High CONTROL SERVER permission updated successfully.
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:45:40.23 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Database 7t6o
High The WSS_Content_powershelltest database does not exist. It will now be created.
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:45:43.03 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Upgrade ajy0d
High 12/18/2014 09:45:43.03 powershell (0x2058) 0x1E28 SharePoint Foundation Upgrade SPUtility ajy0d DEBUG File C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\Template\sql\store.sql, Time
out = 0 sec 43dae8a1-02e3-43f5-8a06-0417221e6385
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:48:52.70 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Database 944r
High Adding S-1-5-21-3747686279-3738247048-1854932723-1131 to the role, db_owner, in the database, WSS_Content_powershelltest.
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:48:52.81 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (Database.Provision (WSS_Content_powershelltest on SQLSERVER\DATABASE)). Execution Time=192653,1989
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:48:57.90 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Upgrade al2ph
High 12/18/2014 09:48:57.90 powershell (0x2058) 0x1E28 SharePoint Foundation Upgrade SPContentDatabaseSequence al2ph DEBUG Executing SQL DDL Script. 43dae8a1-02e3-43f5-8a06-0417221e6385
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:48:58.03 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Upgrade al2ph
High 12/18/2014 09:48:58.03 powershell (0x2058) 0x1E28 SharePoint Foundation Upgrade SPContentDatabaseSequence al2ph DEBUG Executing SQL DDL Script. 43dae8a1-02e3-43f5-8a06-0417221e6385
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:48:58.04 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Upgrade al2ph
High 12/18/2014 09:48:58.04 powershell (0x2058) 0x1E28 SharePoint Foundation Upgrade SPContentDatabaseSequence2 al2ph DEBUG Executing SQL DDL Script. 43dae8a1-02e3-43f5-8a06-0417221e6385
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:48:58.15 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Upgrade ajyw6
High 12/18/2014 09:48:58.15 powershell (0x2058) 0x1E28 SharePoint Foundation Upgrade SPHierarchyManager ajyw6 DEBUG [SPTree Value=SPContentDatabase Name=WSS_Content_powershelltest] added to dependency cache by lookup
43dae8a1-02e3-43f5-8a06-0417221e6385 43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:48:58.23 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Database 944r
High Adding S-1-5-21-3747686279-3738247048-1854932723-1131 to the role, SPDataAccess, in the database, WSS_Content_powershelltest.
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:48:58.59 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Database bx4r
High All documents with forward links in content database [SPContentDatabase Name=WSS_Content_powershelltest] is being dirtied.
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:48:58.97 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Database 944r
High Adding S-1-5-21-3747686279-3738247048-1854932723-1131 to the role, SPDataAccess, in the database, WSS_Content_powershelltest.
43dae8a1-02e3-43f5-8a06-0417221e6385
12.18.2014 09:48:58.98 PowerShell.exe (0x2058)
0x1E28 SharePoint Foundation
Monitoring b4ly
High Leaving Monitored Scope (Creating Content Database (WSS_Content_powershelltest on SQLSERVER\DATABASE)). Execution Time=198893,1578
43dae8a1-02e3-43f5-8a06-0417221e6385
The fact that i am able to create a content database through powershell sorts out permissions problems. I am certain of that because the w3wp.exe and the powershell.exe used for both creations were run under the same user.
The timeout always happens aroud 120 seconds after i started the creation. The creation via powershell takes about 3,5 minutes.
Here for the folks that ask me, why i haven't asked google or bing or some other search engine.
I tried the solutions suggested here
http://www.sharepointpals.com/post/Error-while-Creating-Web-Application-through-Central-Administration , here
http://anthonyspiteri.net/sharepoint-2010-web-ui-timeout-creating-web-application-quick-fix/ and here
http://blogs.ibs.com/Duane.Odum/Lists/Posts/Post.aspx?ID=33
which i thought pointed me to the right solution.
But those post unfortunatly didnt worked out.
I also tried to alter the web.config files (i know that isn't recommended or supported, but it didn't change anything so those are back to normal as well)
So here are my question:
Can you guys help me solve this issue?
Are there any other places where timeouts can be managed or defined?
P.S.: I am new to using this forum. so pls don't crucify me for doing a mistake.
P.S.S: My english is very poor also :D
With best regards
SimonBe careful with settings like these because there may be a much deeper issue at hand. I have had an issue with a customer that manifests itself as a timeout on a site collection. It was very hard to track since it didn't happen frequently. We engaged Microsoft
Support to find out the root cause but all they could point at is a general network issue that pertains to authentication. After digging deeper, we found out that the network issue was caused by a saturated network connectivity to the domain controller that
impacts a site collection when the database is making an authentication call. Keep this solution as more of a quick fix but be sure to conduct a deeper investigation of the real root cause
Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
Blog |
Twitter | LinkedIn
SQL Server High Availability and Disaster Recover Deep Dive Course
Maybe you are looking for
-
How can I use the open in " My application" option to open image attachments.?
How can I use the open in " My application" option to open image attachments.? I am trying to use the uti's given in the apple docs but just unable to do it however its working perfect for pdf and rtf files. please help needed urgent.
-
When to use "Use Temporary File" in receiver FTP adapter
Hi Experts, I have nerver used "Use Temprary File" as the "Write Mode" in receiver ftp adapter. I want to knwo under what kind of requirment we should use this option? Thanks in advance. Best Regards,
-
How can I set stream to end of stream?
How can I set stream to end of stream? I don't want to close the socket. What I have to send that inputstream realizes that end of stream has been reached?
-
3.2.09.30 on Win 7 (64bit) -- help not showing up
Nothing is showing up from either Help->Search or Help->Table of Contents. A task named "Help Center" does appear in task manager but switching to that task has no noticable affect. As indicated in the subject, this is a new install of 3.2.09.30 on a
-
How can I do to use (useful) Time Machine Buddy OUT of Dashboard ?
Hello dear friends, How can I do to use (useful) Time Machine Buddy OUT of Dashboard ? I know there must be a way to use it as an application. I've noticed TinkerTool can do it, but how do you proceed ? Does anybody have the solution ? Thank you for